HAL Essbase Adapter Error

Error Message -- java.lang.UnsatisfiedLinkError: no HssJNIDriver410 in java.library.path I have the 6.5 Essbase runtime environment installed and used the bundled JRE that came with the Full HAL install.

The user variable "PATH" did not exist. I created the "PATH" variable with following value: C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm. I should had read the log file first, solution was in log file (C:\Program File\Vignette\v7\vbis\logs\ directory).

Similar Messages

Hyperion hal essbase adapter error

hi all,
when using HAL, palnning componnent is working fine.
When tring to use essbase adapter, I recieve an error: exception #1 error code 1000 could not create session
i'm so Desperate.
please Help!
Thanks,
Wendy :)
Edited by: 956623 on 07:25 03/09/2012

Hi,
This is usually path/classpath problem.
Ensure the following environment variable references exist on each machine running HAL and the Essbase adapter.
To view/set the environment variables, navigate to My Computer -> Properties -> Advanced -> Environment Variables.
User CLASSPATH:
<HAL_Install_Path>\vbis\Hyperion\EssbaseAdapter
System or User PATH:
<HAL_Install_Path>\vbis\Hyperion\EssbaseAdapter\adm
Cheers
John
http://john-goodwin.blogspot.com/

Issue with HAL essbase adapter

Hi Experts
I have an issue with HAL,I got the below error when I tried to use essbase adapter, the HAL version is 7
java.Lang.NoClassDefFoundError
I know this is known error ...most of the forums are telling this is error related to Environment Variables...but I dont know how to fix as I am unaware of this....java..... classes..bla bla bla..
I installed HAL in c drive, Can anyone help me ...how to fix this issue....
Thank You
M.S

Go to control panel->system->system properties->advance->environmental variables. You should have something like this "C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter" in your classpath variable. Check you installation on your "C:\" drive to get the correct path. Hope this helps.

HAL Essbae adapter error

I installed HAL 7.3 and Essbase adapter. Other than having to create a user variable "PATH", I was able to install Essbase adapater OK. The problem is that, when I drag-in the Essbase adapter and enter server, userID, and password to connect to Essbase, it gives me an error "Exception #1 Error Code = 1000 Error Msg = Error: Could not create session" I'm fairly new to HAL, so I'd appreciate any leads. Thanks! 

The user variable "PATH" did not exist. I created the "PATH" variable with following value: C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm. I should had read the log file first, solution was in log file (C:\Program File\Vignette\v7\vbis\logs\ directory).

HAL Planning Adapter Error

I am getting the following error when I am creating a newplanning adapter. Error unmarshaling return; nested exceptionis:java.lang.ClassNotFoundException:com.hyperionlicence.LicenseAccessException(no security manager:RMI class loaderdisabled) Did anyone face this type of error before. You input is greatly appreciated. thanks

well its seems like a problem with java plug in version.....set default JRE version 1.3.0_05 in control panel andchange the JRE 1.4.1_02 in the system environment variables to1.3.0_05 <table><tr valign="top"><td></td></tr></table>

HAL 9.3.1 Essbaes Adapter Error

We recently migrated from Planning 3.5.1 to 9.3.1 and are still using HAL. In several of our Integrations we were able to pull in the new adapters (Planning 9.2 and Essbase 9.2 - we had to use this older Essbase adapter because the newest version wasn't working). And most of my integrations run fine.
However, I have one integration for HAL that is failing on a Dimension extraction step with the message:
Flow ID: 'getMetaActProd'
Adapter ID: 'Essbase2--GrProfit'
Error Message: com.hyperion.essbaseadapter.application.ap.APException: Exception #1: error code - 1033: Essbase Error: native code - 1060000
Most the time we don't get this detail but a 'C++ exception' message and the integration stops (usually when we run this from it's executable). Sometimes running the integration from the executable gives us the other message above - wierd.
Anyway, I go into the integration and run this and this steps is pulling about 4,000 part numbers into an Access database -we're comparing part #'s from our outline to parts that come in through a data source. The integration gets to about 3,000 or so and then looks like it freezes up and we get the above message.
I have basically the same integration running on a smaller applicaiton/database and it gets through this step OK. So, I'm at a bit of a loss here as to what I can check. I suspect the adapter was fine because I have integrations the get into Essbase and load and calc' data and all that fine. But this step on our larger database is bombing.
Anyone have any ideas?

try the method suggested by user609180 in this post: Re: HAL error 1033 when connecting to essbase/ Analytics />
It worked for me
<blockquote>
<blockquote>
 I've got a solution which Ive tested and works! You need the 9.2.0
 runtime in order for the VBIS Essbase 9.2.0 Adapter to work. This comes
 from installing the 9.2.0 Essbase Client
 This is what I did I on my client machine:
 1. Uninstall EAS 9.3.1 Console (Not the server), Essbase Client 9.3.1, VBIS
 2. Reinstall in this sequence:
 2.1 Essbase Client 9.2.0, including runtime, and spreadsheet add-in
 2.2 VBIS 7.3
 2.3 HAL Essbase Adapter 9.2.0
 2.4 EAS 9.3.1 Console
 Also
 ensure these Window Environment Variables are set(This is based on my
 computer settings so could differ from yours) Right mouse click My
 Computer > Properties > Advanced Tab > Environment Variables:
 /*USER VARIABLES*/
 /*CLASS PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter
 /*PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm
 /*ENVIRONMENT VARIABLES*/
 /*CLASS PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm
 /*PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm;C:\Program Files\Java\jre1.5.0_07\bin\client\
 You might have extra variable paths defined under the PATH variables.
 Ive
 managed to add the adapter in a VBIS project without any errors, it
 connects to Essbase though yet to test if it will perform a send
 properly. The spreadsheet addin works with 9.2.0 and the EAS Console
 works with 9.3.1 connecting to the Essbase Server 9.3.1.
 Hope this helps!
 Message was edited by:
 user609180
</blockquote>
</blockquote>

HAL planning adapter issue

Hi all,
We are using planning 9.3.1, and the planning and HAL 7 are on same machine , the issue was when I tried to pull the planning adapter on to flow diagram - I got a prompt for planning server name , i gave the planning server name
the error is
connection refused to host; nested exception is: java.not connect exception ;connection refused; connect.
Does I need to do any priliminary configuration before trying to use planning adapter..... I appreciate if anyone help me regarding this issue.
Thanks a lot
regards
M.V

Here are a couple of other things to check:
1) Make sure the Planning web app server is running.
2) Verify that you can log on to Planning at http://<your_server>:8300/HyperionPlanning/LogOn.jsp using the user name and password you're supplying to the HAL Planning adapter.
3) Make sure you're supplying the Planning server name, not the Essbase server name to the server port on the Planning adapter. I get them mixed up every once in a while, and when I do, I receive exactly the error message you posted.
4) Make sure the RMI registry service is listening on port 11333. If it isn't, click the Advanced... button on the dialog that appears when you drop the Planning adapter onto a flow diagram, and then specify the port number the RMI registry service is listening on. Alternatively, reconfigure the RMI registry service is listen on port 11333.
Hope this helps.

Essbase Adapter - Intersection validation report

Is it possible to enable an intersection validation report with the essbase adapter? Otherwise I dont see my errors until the export stage

No, you will need to write a custom script to accomplish this.

Issue with Essbase adapter Integration

Hi Experts,
I have installed & configured Essbase adapter ES11X-G4-H in Workbench client. I am able to map the Taget Dimensions in workbench but when I move to FDM webclient >Activities>Map>TargetEBAccount and browse for target values I recieve "Error: Essbase API Procedure: [EsbInit] Threw code: 1030803 - .At Line: 124"
Variable values:
Path:
E:\Oracle\Middleware\EPMSystem11R1\bin-32;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;F:\app\client_64bit\11.2.0\bin;E:\app\sunaina.taneja\product\11.2.0\client_32bit\bin;E:\app\oracle\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\PROGRA~2\PROACT~1\Agent\server\bin;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin
ESSBASEPATH: E:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC/11.1.2.0
I am working on version 11.1.2.1. Please suggest the possible resolution.
Thanks
Shipra
Edited by: user10491593 on Oct 17, 2012 10:31 AM

Thanks for your reply. As you suggested
On 64bit system
<EPM_Oracle_Home>\bin-32;%ESSBASEPATH%\bin;<EPM_Oracle_Home>\Products\Essbase\EssbaseClient-32\bin
Path variable set accordingly as I mentioned in my first post:
starting with:E:\Oracle\Middleware\EPMSystem11R1\bin-32;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin
ends with: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin
Please let me know if I am getting this wrong.

Essbase Adapter ODI Problem

Hi, first i wanna say sorry if i post in the wrong section. I cant find ODI section, n since i have a problem with Essbase Adapter in ODI, so i just post here.
I wanna ask 2 things:
First is regarding the Reverse Engineering in ODI from Essbase. Sometime i cant reverse Essbase Application, but sometime it was success. Is this the problem of the adapter?
Second, when i wanna load the member from an oracle database to Essbase, i always getting the same error message.
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 61, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
 at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.validateLoadOptions(Unknown Source)
 at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
 at org.python.core.PyMethod.__call__(PyMethod.java)
 at org.python.core.PyObject.__call__(PyObject.java)
 at org.python.core.PyInstance.invoke(PyInstance.java)
 at org.python.pycode._pyx14.f$0(<string>:61)
at org.python.pycode._pyx14.call_function(<string>)
 at org.python.core.PyTableCode.call(PyTableCode.java)
 at org.python.core.PyCode.call(PyCode.java)
 at org.python.core.Py.runCode(Py.java)
 at org.python.core.Py.exec(Py.java)
 at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
 at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
 at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
 at com.sunopsis.dwg.cmd.e.i(e.java)
 at com.sunopsis.dwg.cmd.g.y(g.java)
 at com.sunopsis.dwg.cmd.e.run(e.java)
 at java.lang.Thread.run(Unknown Source)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
 at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
 at com.sunopsis.dwg.cmd.e.i(e.java)
 at com.sunopsis.dwg.cmd.g.y(g.java)
 at com.sunopsis.dwg.cmd.e.run(e.java)
 at java.lang.Thread.run(Unknown Source)
wat is the cause of this? and does ODI only accept the parent/child load rules? and does Essbase has it own CKM?
thanks.

better if you try on odi forum:
Data Integrator
To your questions:
there is no specific CKM for essbase;
you can define target/source options (IKM) when you design the Interface Flow.

Unable to create database due to ORA-12560, TNS protocol adapter error

Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.

hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa.

"TNS: Protocol adapter error" while creating a database

Hi All,
I´m new to Oracle and trying to create a database.
We use Oracle 8.1.7
I´m using the Database Configuration Assistant. The problem is when creating the database I get the error:
TNS-12560 TNS: Protocol adapter error
Any help will be really appreciated.
Thanks in advance,
Carlos.

Do you have ORACLE_HOME and/or ORACLE_SID defined in the environment which are different than the settings for the new database that you are trying to create?

TNS-12560: TNS:protocol adapter error, ORA-12535: TNS:operation timed out

I installed Oracle 9i (9.2.0.1.0) on a Windows XP machine (the machine is in a domain). There were no errors during the instalation, but I have problems connecting from the same machine using the sid. Here are some examples from a command promt:
D:\>tnsping orcl9i
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 31-OCT-20
08 17:43:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = timisoara01)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl9i)))
TNS-12560: TNS:protocol adapter error
D:\>sqlplus "sys/pass@orcl9i as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 17:54:54 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12535: TNS:operation timed out
Enter user-name:If I don't use the sid I can connect:
D:\>sqlplus "sys/pass as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 18:05:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>If I go to services I see that the service is running: OracleServiceORCL9I Started.
Thx.

Yes, the XP firewall is running. During the Oracle instalation it poped up twice, but I selected 'Unblock'. I can't turn it off because it is running using the domain settings, but I can add exceptions (programs or ports). Port 1521, tnsping or sqlplus are not blocked and there is an option 'Display a notification when Windows Firewall blocks a program' witch is checked.

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

Receiver Mail adapter Error

HI All
   i    am doing   a   scenario     SFTP    to mail adapter,   i am sending a    file    to    SFTP ADAPTER and   Mail adapter   send the   mail to    clint,   i am   using java mapping ,   i have checked the message in    RWB mesage is    fail   in mail adapte,
   ERROR :   Message processing failed. Cause: java.lang.Exception: java.io.IOException: server does not support PLAIN or LOGIN authentication
anyone suggest me     soloution?

Hi Pankaj,
Remove your mail server user id and password and keep authentication mode as Plain and try in mail adapter configuration.
You can try accessing ID from within IR via menu options or via a direct URL.
Thanks,

HAL Essbase Adapter Error

Similar Messages

Maybe you are looking for