Hal failing to start after fresh install of gnome
Hello, im fairly new to Arch, and i just got everything working and just installed gnome desktop.
Well i went to go restart HAL so i could startx and got this error
EXT3-fs error (device sda3): read_block_bitmap FAIL
Is there something i should change or get rid of to get hal to start.
When i do /etc/rc,d/hal start i get this
EXT3-fs error (device sda3) : read_block_bitmap: Cannot read block bitmap - block_group = 14. block_bitmap = 458752
Any help is much appreciated
This looks like a hardware issue. Maybe an "fsck" will fix this...
Similar Messages
-
Oracle AS - DB Console fails to start after AS install
Hi,
I got an error message at the time of Oracle AS Infra install that setup failed to start the DB Console during DB Configuration assistant run. Also, Oracle AS - DB Console fails to start after the AS install? Any suggestion / remedies would be of help.hi,
follow this metalink note you will find out the answer
Troubleshooting Database Control Startup Issues
Doc ID: Note:549079.1
Thanks, -
[Solved] X11 won't start after fresh install
Hihi!
I've been using Debian for quite some time now but I want to switch to Arch. My notebook is fairly modern and this doesn't mix well with Debian and as such my dGPU is basically unusable. My preferred method of installing Debian is to start headless so I felt quite at home with Arch and got through the install just fine, but I'm having problems launching Openbox among other hardware related issues. I spent yesterday googling and attempting fixes but came up with nothing, so I had to reinstall Debian as I was counting on having a usable computer at the end of the day. I did write down the messages I was getting though, hopefully they are enough to diagnose the issue. My hardware:
AMD A10-5750M (8650G graphics)
AMD Radeon 8970M 2GB
The kernel was the one in the very latest install snapshot (3.12-9 or something)
The first thing I noticed after booting into the fresh install was a warning along these lines
[drm:r600_dma_ring_test] radeon: ring 3 test failed
I ignored it, and preceeded to install the following packages
xorg-server
xorg-utils
xorg-xinit
mesa
xf86-video-ati
openbox
openbox-themes
other things related to the UI I wanted
The ring 3 test warning still occured on reboot after installing X and the radeon drivers. Again I ignored it. My .xinitrc was simply exec openbox-session
I ran startx and it failed, and got a bunch of errors that began right after a reference to "radeon" and the kernel. My xorg log did not get far at all. In fact the last lines were
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding drm device (/dev/dri/card1)
And that was literally the end of the log. This is clearly a GPU/driver issue, probably with the 8970M as card1 seems to be the last line? Any help is appreciated
edit: This is the same process I use to install Debian, and using this exact same kernel (plus the Debian patches) I can start X just fine. my dGPU is unusable with the FOSS drivers through as there is no glamor support in Debian. I get segfaults whenever I launch something with DRI_PRIME=1 after setting the 8970M as the offload provider
Last edited by remyze (2014-02-09 04:02:04)Ok I installed fresh and had the same issues as last time. With KMS early start I still have the same problems launching X and I still have the ring 3 test error (it just appears earlier).
There is nothing pure text in /var/log, I don't know if theres a way to use systemd with wgetpaste, so I took a picture that is hopefully not to difficult to read. I tried to sharpen it up a bit in GIMP.
*see pastebin below*
I also noticed that I get that ring 3 error even when I boot up the Arch installer via USB. I wonder if I should try an older image with an older kernel?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by remyze (2014-02-09 03:30:24) -
Help - Weblogic 6.1 fails to start after SP6 install
After sucessful installation of SP6 for Weblogic 6.1, weblogic fails to start. After inspecting the logs, I discovered the following message:
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.SecurityService.initializeSuid(SecurityService.java:432)
at weblogic.security.SecurityService.initialize(SecurityService.java:120)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:421)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:213)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exceptionplease check article-ID [825933.1]
Grid Control Agent Startup Fails on AIX Server due to Invalid Timezone Setting at the OS [ID 825933.1]
in MOS...
HTH
Edited by: VivaLaVida on 31.05.2011 07:48 -
Vista won't start after fresh install of LabVIEW & 4G RAM
Since Vista is such a memory glutton I decided to upgrade my AMD64 box to 4 Gig RAM. Good idea, no? Turns out not. Now Vista won't start. It locks up at the (lack of) progress bar before the log-in screen. After much hollerin' and hair pullin' I reinstalled Vista and now it sees 3.25 Gig. I install updates; everything looks good; I install LabVIEW 8.0 and activate it. At restart WinDoze Vista won't start. Now I want to scream. My Linux (Ubuntu Gutsy) partition runs fine and indicates 3.9 Gig RAM.
What is LabVIEW installing that has caused this? Does anybody have a place to start looking?
Thank You for reading my rantings
LabVIEW 8.0.1; WinDoze XP
aut viam inveniam aut faciamWell, NI doesn't claim LabVIEW 8.0 is Vista compatible.
If you did the full install, you probably also installed Device Drivers and such. If you used the ones released with 8.0, they are definitely not Vista compatible. Those device drivers will try to load during Vista bootup. If you did, you will need to do a clean uninstall following this procedure. Download the latest drivers from NI's website and see if that fixes your problem.
Message Edited by Matthew Kelton on 02-21-2008 12:50 AM -
Ohasd not starting after fresh install
Hi,
I have installed Oracle Database 11g Release 11.2.0.1.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options on SUSE Linux Enterprise Server 11 (x86_64) 11.0.
After installation all cluster and resources were up, I could log in to database. I have restarted orcl1 node, and after boot the ohasd service is not started. Same is with orcl0 node. When I start manually, the cluster comes up. See below:
grid@orcl1:~> crsctl check has
CRS-4639: Could not contact Oracle High Availability Services
orcl1:~ # ps aux | grep ohasd
root 5157 0.0 0.0 11224 1448 ? Ss 03:02 0:00 /bin/sh /etc/init.d/init.ohasd run
root 5365 0.0 0.0 4316 756 pts/0 S+ 03:02 0:00 grep ohasd
orcl1:~ # chkconfig ohasd
ohasd on
orcl1:~ # service ohasd start
Starting ohasd:
orcl1:~ #
orcl1:~ # CRS-4123: Oracle High Availability Services has been started.
orcl1:~ # ps aux | grep ohasd
root 5157 0.0 0.0 11224 1464 ? Ss 03:02 0:00 /bin/sh /etc/init.d/init.ohasd run
root 5414 3.3 0.3 569056 47124 ? Ssl 03:03 0:01 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
root 5736 0.0 0.0 4316 752 pts/0 S+ 03:03 0:00 grep ohasdThen within short time everything is started up...
Anyone has idea why ohasd service is not started automatically ?
Update:
I have changed /etc/init.d/ohasd file so that it 'logs' to /tmp time when invoked (see below the code). After reboot there is no record of startup /tmp/ohasd*
orcl1:~ # chkconfig --list ohasd
ohasd 0:off 1:off 2:off 3:on 4:off 5:on 6:off
# This script is invoked by the rc system.
/bin/touch /tmp/ohasd.start."`date`" # <<<--- added line to 'log' the start
ORA_CRS_HOME=/u01/app/11.2.0/gridThanks !
Edited by: kamilp on Feb 17, 2013 11:35 PMHi,
there are two scripts - both installed by installer, I have not changed anything...
orcl1:~ # l /etc/init.d/*ohasd*
-rwxr-xr-x 1 root root 3079 Feb 18 00:37 /etc/init.d/init.ohasd*
-rwxr-xr-x 1 root root 2632 Feb 18 11:27 /etc/init.d/ohasd*
orcl1:~ # l /etc/init.d/rc5.d/*ohasd*
lrwxrwxrwx 1 root root 17 Feb 18 00:37 /etc/init.d/rc5.d/S96ohasd -> /etc/init.d/ohasd*
orcl1:~ # head -10 /etc/init.d/ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# ohasd.sbs - Control script for the Oracle HA Services daemon
# This script is invoked by the rc system.
ORA_CRS_HOME=/u01/app/11.2.0/grid
orcl1:~ # head -10 /etc/init.d/init.ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# init.ohasd - Control script for the Oracle HA services daemon
# This script is invoked by the init system -
Problem with MTRR - X doesn't start after fresh install
Hi all!
I have a big problem with MTRR, i think...
My PC Specs: P4 3GHZ with HT "prescot", Asus P4S800D-X, ATI x1650 Pro, 1024MB Ram Dual Channel, etc...
I can't start the X system. When i try to try the new Xorg.conf, the X seems to start but the screen stays blank and sometimes can i go back to TTY and sometimes not...
I've tryed with the following drivers and no luck.
- Vesa: Blank Screen, sometimes keyboard works and sometimes not.
- RadeonHD: The same...
- Radeon (or ati): The same...
At the end of the Xorg.0.log, i see the MTRR problem. the memory from the VGA Card is not detected automatically. The "cat /proc/mtrr" differs from ubuntu 8.04, when the X server works correctly.
Ive been reading a lot in google and others forum and see a lots of tricks related to MTRR (but im not completly sure of that's the problem...) but every trick i try doesn't seems to work.
I tryed the following tricks:
- Adding the memory to /proc/mtrr manually = Added correctly but NO LUCK
- Activate/Deactivate HotPlugging = NO LUCK
- Adding to my boot line the "nopat" and "enable_mtrr_cleanup = MTRR keeps showing wrong memory (no video memory)
- After adding correctly the memory to MTRR try the xorg.conf but blank screen (i dunno if xorg rewrites the mtrr when run)
- Some others tricks i cant remember...
Also, with the radeonhd, i get this errors in xorg.0.log:
- rhdAtomgetDDCIndex: GPIO_DDC Index 14 exceeds maximum 5
- RHDCSStop: Command Submission backen is not active!
- error setting MTRR ( base... blablabla) Invalid argument (22)
That's not my first install, but i can't make it work. As i readed, it's a kernel problem related to 2.6.29, in 2.6.28 there's no problem but i dont have access to the old kernel.
Can someone help my or i need to wait for a new kernel release to use Arch?
Bye!
Last edited by Driskol (2009-04-17 11:36:26)Driskol wrote:but i dont have access to the old kernel
I can't solve your problem, but I can help you work around it by downgrading if nobody else can figure it out.
You can find old packages here at the Arch Rollback Machine project repo someone thankfully keeps running,
http://arm.nrk.cc/
Just go to 'core' and get the package(s) you need and downgrade. There is also a thread on here somewhere about setting up pacman.conf to point to a specific date with ARM if you don't want to get individual stuff manually, but just doing it individually would probably be easier, as I don't expect the kernel has too many other things you need
Last edited by FrozenFox (2009-04-17 10:51:42) -
How can I restart a mac pro that shows only a grey screen with a spinning wheel. I reinstalled snow leopard (10.6.3) over 10.6.8 because apple genious people said I had problems with my library files after a time capsule crash. I reinstalled but when done I got only a blue screen. I restarted with the power button and tried to insall 10.6 combined upgrades. I got an error message that it could not install because of an error. When I powered down and tried to restart, I get only a grey screen. My optical drive does not open so I can't restart from another source.
Restart, holding down the mouse button. That should eject the disc. Zap the PRAM and Reset the SMC. Then, pop in the install disc, restart with it in again, select your language, and, when the menu bar pops up, select Disk Utility from the Utilities menu. select the boot volume and repair the disk.
-
Can not start/stop fullfilment server after fresh install
Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunaledit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1
-
My ITunes library failed to start after an upgrade, now I'm unable to open or re-install. Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system". Any help with this? I've tried un-installing and downloading only to get the same message again.
Thank you to "turingtest2", solution for someone else worked for me as well!
-
ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4
I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...ColinDear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig -
[PARTIALLY SOLVED] HAL fails to start
** UPDATE: PARTIALLY SOLVED - SEE BOTTOM OF THE FIRST POST
HAL fails to start. I'm not exactly sure why this is, but I believe it has something to do with my attempts to get automounting working under gnome.
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
[zen@intellitech ~]$ vim /etc/rc.conf
MODULES=(acpi-cpufreq cpufreq_ondemand e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore thinkpad_acpi uinput vboxdrv)
DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-1
hal-info 0.20080508-1
[zen@intellitech ~]$ /usr/sbin/hald --daemon=no --verbose=yes
03:13:37.451 [i] hald.c:669: hal 0.5.11
03:13:37.451 [i] hald.c:734: Will not daemonize
03:13:37.451 [i] hald_dbus.c:5381: local server is listening at unix:abstract=/var/run/hald/dbus-pdtZvbqaVq,guid=312b47921cba4c5cdbee099a48ec87d1
03:13:37.452 [E] ck-tracker.c:367: Error doing GetSeats on ConsoleKit: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
03:13:37.452 [E] ck-tracker.c:792: Could not get seats and sessions
03:13:37.452 [W] hald_dbus.c:5806: Could not initialize seats and sessions from ConsoleKit
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
03:13:37.453 [i] hald_runner.c:301: Runner has pid 3675
03:13:37.453 [i] hald_runner.c:182: runner connection is 0x15bdec0
03:13:37.456 [W] osspec.c:373: Unable to open /proc/mdstat: No such file or directory
03:13:37.457 [D] util_helper.c:124: drop_privileges: could not set group id
[zen@intellitech ~]$ vim /etc/group
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:root,zen
disk::6:root,zen
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,zen
ftp::11:
mail::12:
log::19:root
smmsp::25:
games::50:
network:x:90:zen
video:x:91:zen
audio::92:root,zen
optical::93:root,zen
floppy:x:94:root,zen
storage:x:95:root,zen
power:x:98:root,zen
nobody::99:
users::100:zen
locate:x:21:
uucp:x:14:
http:x:33:
scanner:x:96:
dbus:x:81:root,zen
hal:x:82:root,zen
avahi:x:84:root,zen
camera:x:97:
gdm:x:101:
vboxusers:x:108:zen
samba:x:109:zen,root
* Yes, I know it is bad practice to have a normal user listed under the disk group. It is necessary, however, in order to have raw disk access for virtual box.
[zen@intellitech ~]$ sudo /etc/rc.d/dbus stop
:: Stopping D-BUS system messagebus [DONE]
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting D-BUS system messagebus [DONE]
:: Starting Hardware Abstraction Layer [FAIL]
It's odd, because D-BUS will start but hal will not... Anybody have any suggestions?
* UPDATE (10/08/08): Did a full system upgrade and removed dbus from daemons array in rc.conf. UDEV EVENTS Processing speed seems to be back to normal.
** SOLUTION UPDATE: After removing custom ntfs-3g fdi policies from /etc/hal/fdi/policy/, hal seems to load without any problems. This seems to be a bug, since my policies were working at one point, and I believe a hal update caused the problem. I'll see if I can track down the exact hal version that it breaks on, and submit a respective bug report for it.
** OFF-TOPIC UPDATE: Using hwdetect --modules to get a modules list, and using these modules in rc.conf with MOD_AUTOLOAD turned off (and also in mkinitcpio.conf and running mkinitcpio -g <path>), seems to have dramatically increased my "Load udev events" processing time. After doing this, my udev speed went from almost 4000ms to literally < 500ms.
Last edited by intellitech (2008-10-08 14:58:53)koch wrote:
intellitech wrote:DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
you have dbus starting before hal but hal starts debus by default so please try this...
DAEMONS=(...@acpid @hal @alsa...)
and delete debus from that line.
Removed dbus from the daemons array and hal still won't start. Also, I noticed that the "Loading udev events" portion of the boot process seems to take a lot longer than it used to. Last boot, it took about 19130ms, whereas it used to take < 3000ms. Could these be related?
Also, I ran a full system upgrade, both udev and hal were upgraded.
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-4
hal-info 0.20080508-1
[zen@intellitech ~]$ pacman -Q | grep udev
klibc-udev 128-1
udev 128-5 -
Multiple Oracle Homes - Oracle Listener failes to start after installation
Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related detailshi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards -
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?
-
Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)
Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoithelp help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed
Maybe you are looking for
-
Adobe Bridge CS 4 missing file properties
I'm working with photoshop files (CS 4) and a few seem to have dropped some of the metadata from the file properties in the bridge browser. Dimensions, Resolution, Bit depth, and Color Mode are missing, and the Color Space is listed as Untagged, even
-
Can I remotely view my iPhone 4s camera's view, from my Macbook Pro?
(I "understand" this can be done with a "JB'd" iPhone. I don't want to go this route.) And, I also do not want to view the cameras feed through a wireless network, or the internet. (Like the "Mini Webcam" app offers. I am shooting "static video inter
-
Finder media encoder, how can I add audio formats support?
I've noticed the feature where if you right click on a media file, you get an option in the popup menu to encode the file to some Apple-friendly format, I suppose. I am trying to find a way to enhance this program's support for audio formats. I have
-
Call remains in "conferenced" state after the call is released
We have a scenario where a lengthy recorded message is set up through a ICM call routing script. If we call the number we assigned to the script using our hard phones the call is disconnected as soon as the recorded message is finished playing. When
-
It was my assumption that whatever text we attach to the comments of the database columns get associated with the help text in the popup help for all the items created when a region is based on that table. I surely remember I saw that initially. But