HAL fails because of D-BUS issue

So thats the problem I get when trying to start HAL on my newly installed arch. What do I do to fix this?
Thanks

ghostHack wrote:Happened to me too, I've been meaning to file a bug on this. Basically the post_install commands that create the dbus user/group in the dbus.install scriptlet are not being executed when the package is installed, there doesn't seem to be anything wrong with te commands though and other packages that do the same thing (e.g. hal) work fine..
Link me to the bug after you file it. I'll confirm it.

Similar Messages

Post goods issue failed because of serial number

in outbound delivery,post goods issue failed because of serial number,but this serial number was not assigned to any other material

Hello,
Check the serial number and material with IQ03. Serial number is material specific.
Prase

Issue with business rule. Failed because the fact have not been found .

Hello
I'm trying to execute a business rule inside my process to evaluate a service output. I've been created the rules and have used before succesfully. I got a desicion table which evaluate the entry params and in the actions I've made a new Assert to create and return an instance of en.abis.ns.biasxsd.BIASFaultDetail. Sometimes it works perfectly and in other moments fails.
I got the following exception. I'm so sorry about the spanish but this is the language the server uses.
<bpelFault><faultType>0</faultType><operationErroredFault xmlns="http://xmlns.oracle.com/brValidateQualityScore/brValidateQualityScore_brValidateQualityScore_DecisionService"><part name="payload"><errorInfo xmlns="http://xmlns.oracle.com/brValidateQualityScore/brValidateQualityScore_brValidateQualityScore_DecisionService"><errorMessage>Error al ejecutar una unidad de trabajo de sesión de reglas, no se ha encontrado el hecho. La sesión de reglas 510027 ha fallado porque no se ha encontrado el hecho ki.abis.ns.biasxsd.BIASFaultDetail o no existe. Compruebe la excepción subyacente y corrija el error. Póngase en contacto con los Servicios de Soporte Oracle si no se puede corregir el error. 510027</errorMessage></errorInfo></part></operationErroredFault></bpelFault>To avoid language problems the error in English is somethiong like this:
Failed to perform a unit work of session rules, not found the fact. The rule session 210027 failed because the fact have not been found ki.abis.ns.biasxsd.BIASFaultDetail, or does not exits. Check the underlying exception and correct the error. Contact Oracle Support Services if you can not correct the error
Regards,
isabelbernely

Have you check if this Variable exist?
Regards
Amarnath
http://amarnath-essbase-blog.blogspot.com

[PARTIALLY SOLVED] HAL fails to start

** UPDATE: PARTIALLY SOLVED - SEE BOTTOM OF THE FIRST POST
HAL fails to start. I'm not exactly sure why this is, but I believe it has something to do with my attempts to get automounting working under gnome.
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
[zen@intellitech ~]$ vim /etc/rc.conf
MODULES=(acpi-cpufreq cpufreq_ondemand e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore thinkpad_acpi uinput vboxdrv)
DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-1
hal-info 0.20080508-1
[zen@intellitech ~]$ /usr/sbin/hald --daemon=no --verbose=yes
03:13:37.451 [i] hald.c:669: hal 0.5.11
03:13:37.451 [i] hald.c:734: Will not daemonize
03:13:37.451 [i] hald_dbus.c:5381: local server is listening at unix:abstract=/var/run/hald/dbus-pdtZvbqaVq,guid=312b47921cba4c5cdbee099a48ec87d1
03:13:37.452 [E] ck-tracker.c:367: Error doing GetSeats on ConsoleKit: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
03:13:37.452 [E] ck-tracker.c:792: Could not get seats and sessions
03:13:37.452 [W] hald_dbus.c:5806: Could not initialize seats and sessions from ConsoleKit
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
03:13:37.453 [i] hald_runner.c:301: Runner has pid 3675
03:13:37.453 [i] hald_runner.c:182: runner connection is 0x15bdec0
03:13:37.456 [W] osspec.c:373: Unable to open /proc/mdstat: No such file or directory
03:13:37.457 [D] util_helper.c:124: drop_privileges: could not set group id
[zen@intellitech ~]$ vim /etc/group
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:root,zen
disk::6:root,zen
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,zen
ftp::11:
mail::12:
log::19:root
smmsp::25:
games::50:
network:x:90:zen
video:x:91:zen
audio::92:root,zen
optical::93:root,zen
floppy:x:94:root,zen
storage:x:95:root,zen
power:x:98:root,zen
nobody::99:
users::100:zen
locate:x:21:
uucp:x:14:
http:x:33:
scanner:x:96:
dbus:x:81:root,zen
hal:x:82:root,zen
avahi:x:84:root,zen
camera:x:97:
gdm:x:101:
vboxusers:x:108:zen
samba:x:109:zen,root
* Yes, I know it is bad practice to have a normal user listed under the disk group. It is necessary, however, in order to have raw disk access for virtual box.
[zen@intellitech ~]$ sudo /etc/rc.d/dbus stop
:: Stopping D-BUS system messagebus [DONE]
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting D-BUS system messagebus [DONE]
:: Starting Hardware Abstraction Layer [FAIL]
It's odd, because D-BUS will start but hal will not... Anybody have any suggestions?
* UPDATE (10/08/08): Did a full system upgrade and removed dbus from daemons array in rc.conf. UDEV EVENTS Processing speed seems to be back to normal.
** SOLUTION UPDATE: After removing custom ntfs-3g fdi policies from /etc/hal/fdi/policy/, hal seems to load without any problems. This seems to be a bug, since my policies were working at one point, and I believe a hal update caused the problem. I'll see if I can track down the exact hal version that it breaks on, and submit a respective bug report for it.
** OFF-TOPIC UPDATE: Using hwdetect --modules to get a modules list, and using these modules in rc.conf with MOD_AUTOLOAD turned off (and also in mkinitcpio.conf and running mkinitcpio -g <path>), seems to have dramatically increased my "Load udev events" processing time. After doing this, my udev speed went from almost 4000ms to literally < 500ms.
Last edited by intellitech (2008-10-08 14:58:53)

koch wrote:
intellitech wrote:DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
you have dbus starting before hal but hal starts debus by default so please try this...
DAEMONS=(...@acpid @hal @alsa...)
and delete debus from that line.
Removed dbus from the daemons array and hal still won't start. Also, I noticed that the "Loading udev events" portion of the boot process seems to take a lot longer than it used to. Last boot, it took about 19130ms, whereas it used to take < 3000ms. Could these be related?
Also, I ran a full system upgrade, both udev and hal were upgraded.
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-4
hal-info 0.20080508-1
[zen@intellitech ~]$ pacman -Q | grep udev
klibc-udev 128-1
udev 128-5

Processing this item failed because of a PDF parser error. Input string was not in a correct format.

Good Morning,
We're having issues parsing several hundred PDF files located in two separate Record Center sites. All other PDF documents in the environment are being crawled and parsed without issue. I've verified the permissions for the Search service account, but that
doesn't seem to be the issue. Searching for this particular error hasn't returned much, but I have ensured that the Search service account has been added to the necessary Local Security Policy objects and cleared the configuration cache. Any help would be
greatly appreciated.
Processing this item failed because of a PDF parser error. ( Error parsing document 'https://asdf.com/sites/HRRecords/asdf.pdf'. Input string was not in a correct format.; ; SearchID = 6642FEEF-6921-434E-B084-02809173D8A7 )

This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 )

SharePoint 2013 Search - Zip - Parser server ran out of memory - Processing this item failed because of a IFilter parser error

Moving content databases from 2010 to 2013 August CU. Have 7 databases attached and ready to go, all the content is crawled successfully except zip files. Getting errors such as
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/file1.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The function encountered an unknown error.; ; SearchID = 7A541F21-1CD3-4300-A95C-7E2A67B2563C
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/file2.zip'. Document failed to be processed. It probably crashed the server.; ; SearchID = 91B5D685-1C1A-4C43-9505-DA5414E40169 )
SharePoint 2013 in a single instance out-of-the-box. Didn't install custom iFilters as 2013 supports zip. No other extensions have this issue. Range in file size from 60-90MB per zip. They contain mp3 files. I can download and unzip the file as needed.
Should I care that the index isn't being populated with these items since they contain no metadata? I am thinking I should just omit these from the crawl.

This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 )

The timesheet creation failed, because of problems with the project I server or with data validation

Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.

I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book

Error message: "Logging into the account failed because an error occurred."

Hello,
We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
"Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
Any help will be greatly appreciated.
Best regards,
Alain Chammas
A user trying to access his account from a PC (wired) has no problems.

A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
Derndest thing I ever saw.

Logging in to the account failed because an error occurred

I've been looking after Mac's in an ophthalmologist's office for about 6 years. We initially used Panther server with networked home directories. With the large images, slow computers, and slow network we moved about 4 years ago to local accounts and local home directories using a Leopard Server for file sharing and print serving. About a year ago we moved to a Mac Mini Server but kept local home directories. We would like to move back to networked home directories and implement group folders for sharing.
I have another Mac Mini Server at home and am trying to set up a test environment but am having trouble getting networked home directories to work. I'm trying to log in using my MacBook Pro. Both machines are at 10.6.8. I followed the outstanding setup instructions from
         http://www.wazmac.com/servers_network/fileservers/osxserver_setup/osxserver106_s etup.htm
but omitted the part of setting up the groups.   I just set up an account, Test1 but am unable to log in using it. I can log into the account and access the home folder through my finder though. When I try log in I get:
         You are unable to log in to the user account "test1" at this time
          logging in to the account failed because an error occurred.
I have looked for several days now and have found no answers that have resolved this.
My DNS tests fine and it appears that my password is working. I have turned off all the services except for AFP, DNS, and Open Directory. The home folder is on the second drive /Volumes/MacHD2/Homes/test1 and it is set for automount and home directories. I set each of the separately with a save between. The server appears in my /Network/Servers/ directory right down to the Homes directory.
The following is the only log file that indicates any error. This is from the most recent reboot:
Directory Services Error Log:
2011-07-09 09:19:12 PDT - T[0x00007FFF70C75CC0] - DNSServiceProcessResult returned -65563
2011-07-09 09:19:45 PDT - T[0x0000000101C8D000] - Misconfiguration detected in hash 'Global SID':
2011-07-09 09:19:45 PDT - T[0x0000000101C8D000] - Computer 'guest' (/LDAPv3/127.0.0.1) - ID -1 - UUID 3A0E5953-EC2B-4F6E-A929-3B32406A10C3 - SID S-1-5-21-3687144454-2494095375-1043814123-998
2011-07-09 09:19:45 PDT - T[0x0000000101C8D000] - Computer 'MiniServer.tolan.homeip.net$' (/Local/Default) - ID -1 - UUID 87FB76C0-A528-44FC-ADBF-2A7EC7809A9A - SID S-1-5-21-3687144454-2494095375-1043814123-998
2011-07-09 09:19:45 PDT - T[0x0000000101C8D000] - Misconfiguration detected in hash 'Global SID':
2011-07-09 09:19:45 PDT - T[0x0000000101C8D000] - Computer 'guest' (/LDAPv3/127.0.0.1) - ID -1 - UUID 3A0E5953-EC2B-4F6E-A929-3B32406A10C3 - SID S-1-5-21-3687144454-2494095375-1043814123-998
2011-07-09 09:19:45 PDT - T[0x0000000101C8D000] - Computer 'MiniServer.tolan.homeip.net$' (/Local/Default) - ID -1 - UUID 87FB76C0-A528-44FC-ADBF-2A7EC7809A9A - SID S-1-5-21-3687144454-2494095375-1043814123-998
The following are the relevant messages from the other log files that captured the login attempt:
AFP Access Log:
IP 192.168.77.20 - - [09/Jul/2011:11:25:11 -0800] "Login test1" 0 0 0
IP 192.168.77.20 - - [09/Jul/2011:11:25:11 -0800] "Logout test1" 0 0 0
DNS Log:
09-Jul-2011 09:38:09.777 received control channel command 'freeze'
09-Jul-2011 09:38:09.778 freezing all zones: success
09-Jul-2011 09:38:09.885 received control channel command 'reload'
09-Jul-2011 09:38:09.885 loading configuration from '/private/etc/named.conf'
09-Jul-2011 09:38:09.886 using default UDP/IPv4 port range: [49152, 65535]
09-Jul-2011 09:38:09.886 using default UDP/IPv6 port range: [49152, 65535]
09-Jul-2011 09:38:09.888 reloading configuration succeeded
09-Jul-2011 09:38:09.888 reloading zones succeeded
09-Jul-2011 09:38:09.889 zone 77.168.192.in-addr.arpa/IN/com.apple.ServerAdmin.DNS.public: loaded serial 2011070804
09-Jul-2011 09:38:09.889 zone tolan.homeip.net/IN/com.apple.ServerAdmin.DNS.public: loaded serial 2011070900
09-Jul-2011 09:38:09.893 received control channel command 'thaw'
09-Jul-2011 09:38:09.893 thawing all zones: success
09-Jul-2011 09:38:09.893 zone 77.168.192.in-addr.arpa/IN/com.apple.ServerAdmin.DNS.public: loaded serial 2011070804
09-Jul-2011 09:38:09.893 zone tolan.homeip.net/IN/com.apple.ServerAdmin.DNS.public: loaded serial 2011070900
Kerberos Server Log:
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.77.20: NEEDED_PREAUTH: [email protected] for krbtgt/[email protected], Additional pre-authentication required
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.77.20: NEEDED_PREAUTH: [email protected] for krbtgt/[email protected], Additional pre-authentication required
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](debug): handling authdata
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](debug): handling authdata
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](debug): .. .. ok
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](debug): .. .. ok
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.77.20: ISSUE: authtime 1310235907, etypes {rep=18 tkt=16 ses=18}, [email protected] for krbtgt/[email protected]
Jul 09 11:25:07 MiniServer.tolan.homeip.net krb5kdc[55](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.77.20: ISSUE: authtime 1310235907, etypes {rep=18 tkt=16 ses=18}, [email protected] for krbtgt/[email protected]
Jul 09 11:25:11 MiniServer.tolan.homeip.net krb5kdc[55](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.77.20: ISSUE: authtime 1310235907, etypes {rep=18 tkt=16 ses=18}, [email protected] for afpserver/[email protected]
Jul 09 11:25:11 MiniServer.tolan.homeip.net krb5kdc[55](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.77.20: ISSUE: authtime 1310235907, etypes {rep=18 tkt=16 ses=18}, [email protected] for afpserver/[email protected]
Password Service Server Log:
Jul 9 2011 11:25:07    RSAVALIDATE: success.
Jul 9 2011 11:25:07    AUTH2: {0x4e17e4b75f13dc1d0000000600000006, test1} DHX authentication succeeded.
Jul 9 2011 11:25:07    KERBEROS-LOGIN-CHECK: user {0x4e17e4b75f13dc1d0000000600000006, test1} is in good standing.
Jul 9 2011 11:25:07    KERBEROS-LOGIN-CHECK: user {0x4e17e4b75f13dc1d0000000600000006, test1} authentication succeeded.
Jul 9 2011 11:25:07    GETPOLICY: user {0x4e17e4b75f13dc1d0000000600000006, test1}.
Jul 9 2011 11:25:07    GETPOLICY: user {0x4e17e4b75f13dc1d0000000600000006, test1}.
I would appreciate any and all assistance with this. I've never had a problem in the past with configuring and using networked home directories. This has me stumped. This is now my 3rd day working on it. I've been through numerous discussion groups, googled endlessly, and even re-installed the server software twice to make sure I'm working with a clean current copy.
Thanks in advance for any advice you can offer....

Thanks for your comments, and particularly for confirming that the Kerberos and AFP logs indicated success.   I did have my sharing set properly as you describe however checking that I had set sharing appropriately it led me to the answer to my problem...
You were right about the location of Test1's home directory and it is on the second disk.   I have always had a level of discomfort setting up the Home URL under 'Home' when setting up a home directory. I thought I had to put the fully qualified directory name, in this case:
      afp://miniserver.tolan.homeip.net/Volumes/MacHD2/Homes
After turning sharing off and on for the Homes directory, just to ensure, I saw that WGM had inserted another, more abbreviated URL for me to select:
      afp://MiniServer.tolan.homeip.net/Homes
When I selected this URL all started working.   I guess I've been outsmarting myself over the years by overthinking what I had to do.
So, while your suggestion was correct, that wasn't my problem, but checking to ensure that I'd done it right did lead me to the solution.   Hence, a helpful answer, rather than a correct one even though you are correct.
This issue of what the URL should look like has always bothered me but now I know. I guess I've just been lucky up until now and in this business good luck doesn't teach you anything...   :-)
Cheers, and thanks for this...

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

The Attempt to burn disc failed. The burn failed because of a medium write error.

When trying to burn a CD, I'm getting an error that reads:The Attempt to burn disc failed. The burn failed because of a medium write error. I experienced this message before and took my Macbook in to the store and the the genius was stumped but when he tried one of his CD's it burned fine to he concluded that the problem was in the CD's NOT the Macbook or program HOWEVER, months later, I'm having the same issue using the NEW CD's. Does anyone have any information about this?

3 methods to fix this:
The first is to reset pram
at boot up hold four keys down till you hear 3 chimes:
command(apple)=option+p+r
release keys and it will now reboot.
The second is to reset nvram
at boot up hold four keys down:
command(apple)+option+o+f
a black screen will appear
now type: reset-nvram
click enter
now type: reset-all
click enter
it will now reboot
The third is to open system preferences.
go to international
under languages: drag any of the other languages to the top, then drag english back to the top.
make sure "order for sorted lists" is set to english
make sure "word break" is set to english(united states, computer)
then restart.
I hope this helps you as it certainly did me. :^)

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

The processing of Group Policy failed because of lack of network connectivity to a domain controller

We are setting up a new AD environment with one AD/DC running DNS services, and a secondary DNS server configured with secondary zone. The problem is that none of the machines in the the domain are getting GPO.
When I run a gpupdate /force from a machine, I get the following output:
"Updating Policy...
User Policy update has completed successfully.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed because of lack of network connectivity to
a domain controller. This may be a transient condition. A success message would
be generated once the machine gets connected to the domain controller and Group
Policy has succesfully processed. If you do not see a success message for sever
al hours, then contact your administrator.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results."
While the system event log outputs the following:
"The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator."
All the machines that were joined to the domain are able to resolve in forward and reverse lookups, ping the DC and ping each other so I dont understand how the error can be resolved.
Here are few things I have tried:
1. I came across this KB which checked ok for me: http://support.microsoft.com/kb/241515
2. Made a copy of the default GPO, applied to a OU with one machine, and made sure to remove any GPO links from above
3. Enabled the following two local Group policies on a test member:
GP slow link detection
Startup policy processing wait time
4. Modified firewall to allow everything on both member and DC
5. Verified DSN logs, SRV records, access to sysvol ( added authenticated users to sysvol)
I have yet to figure out the reason for this issue. Has anyone seen anything like this before?

1. I checked the NIC, it only has one IP. and I followed your article. I set the primary DNS to its own IP and the secondary DNS to the loopback ip
2. This is a new DC and DNS server. I dont have old records yet. I also check the DNS event logs. No errors
3. I made sure the member server is pointing only to the only DC/DNS server
4. Here is the output from the dcdiag.... everything passed except, the Netlogons part. I'm not sure what means or how to fix it yet:
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Complete output:
> hostname
Server: hostname.domain.local
Address: X.X.X.95
> ^C
C:\Windows\system32>
C:\Windows\system32>nslookup
> set type=all
>
>
>
> _ldap._tcp.dc._msdcs.domainname
_ldap._tcp.dc._msdcs.domain.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = hostname.domain.local
hostname.domain.local internet address = X.X.X.95
> ^C
C:\Windows\system32>cd ..
C:\Windows>cd SYSVOL
C:\Windows\SYSVOL>cd sysvol
C:\Windows\SYSVOL\sysvol>dir
Volume in drive C has no label.
Volume Serial Number is F624-CDB2
Directory of C:\Windows\SYSVOL\sysvol
10/29/2014 08:25 PM <DIR> .
10/29/2014 08:25 PM <DIR> ..
10/29/2014 08:25 PM <JUNCTION> domain.local [C:\Windows\SYSVOL\domain]
0 File(s) 0 bytes
3 Dir(s) 63,971,037,184 bytes free
C:\Windows\SYSVOL\sysvol>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = hostname
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\hostname
Starting test: Connectivity
......................... hostname passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\hostname
Starting test: Advertising
......................... hostname passed test Advertising
Starting test: FrsEvent
......................... hostname passed test FrsEvent
Starting test: DFSREvent
......................... hostname passed test DFSREvent
Starting test: SysVolCheck
......................... hostname passed test SysVolCheck
Starting test: KccEvent
......................... hostname passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... hostname passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... hostname passed test MachineAccount
Starting test: NCSecDesc
......................... hostname passed test NCSecDesc
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Starting test: ObjectsReplicated
......................... hostname passed test
ObjectsReplicated
Starting test: Replications
......................... hostname passed test Replications
Starting test: RidManager
......................... hostname passed test RidManager
Starting test: Services
......................... hostname passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/04/2015 18:23:06
Event String:
Name resolution for the name ctldl.windowsupdate.com timed out after
none of the configured DNS servers responded.
......................... hostname passed test SystemLog
Starting test: VerifyReferences
......................... hostname passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : emcdsm
Starting test: CheckSDRefDom
......................... emcdsm passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... emcdsm passed test CrossRefValidation
Running enterprise tests on : domain.local
Starting test: LocatorCheck
......................... domain.local passed test LocatorCheck
Starting test: Intersite
......................... domain.local passed test Intersite
C:\Windows\SYSVOL\sysvol>

Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards

Script returns the same error.
System databases:
1   1   760   -1   10   1048578   0   1   master       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2   0   12768   -1   10   1048642   0   1   mastlog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1   1   1024   -1   10   1048578   0   2   tempdev       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2   0   64   -1   10   1048642   0   2   templog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1   1   288   -1   128   2   0   3   modeldev   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2   0   4464   -1   10   1048642   0   3   modellog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1   1   28936   -1   10   1048578   0   4   MSDBData   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2   0   3352   268435456   10   1048642   0   4   MSDBLog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
       SELECT physical_name
       FROM master.sys.master_files
       WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

HAL fails because of D-BUS issue

Similar Messages

Maybe you are looking for