HAL Planning Adapter 9.2.0.0.0

Morning All
Having a problem with HAL connecting to our planning server.
The adapter is added in and works most of the time. When I double click on the planning adapter, go the methods tab and click refresh, on clicking OK i get the following error message "err unmarshalling reeturn; nested exception is: java.io.EOFException"
I restart the HyperionRMIRegistry and things work fine. The problem is, that I try to click refresh again and it fails. So the problem is intermittant. The restarting of services seems to work most times, but its pretty flakey and falls over again after 1 or 2 attempts.
Any ideas?
Simon

Hi,
Just go directly to 9.3.1, you can migrate the planning application to the new version just like you would be migrating from a dev to prod env.
Make sure you back everything up
Install 9.3.1
And then follow the usual migration process - Migration of Hyperion Planning Application
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

HAL planning adapter issue

Hi all,
We are using planning 9.3.1, and the planning and HAL 7 are on same machine , the issue was when I tried to pull the planning adapter on to flow diagram - I got a prompt for planning server name , i gave the planning server name
the error is
connection refused to host; nested exception is: java.not connect exception ;connection refused; connect.
Does I need to do any priliminary configuration before trying to use planning adapter..... I appreciate if anyone help me regarding this issue.
Thanks a lot
regards
M.V

Here are a couple of other things to check:
1) Make sure the Planning web app server is running.
2) Verify that you can log on to Planning at http://<your_server>:8300/HyperionPlanning/LogOn.jsp using the user name and password you're supplying to the HAL Planning adapter.
3) Make sure you're supplying the Planning server name, not the Essbase server name to the server port on the Planning adapter. I get them mixed up every once in a while, and when I do, I receive exactly the error message you posted.
4) Make sure the RMI registry service is listening on port 11333. If it isn't, click the Advanced... button on the dialog that appears when you drop the Planning adapter onto a flow diagram, and then specify the port number the RMI registry service is listening on. Alternatively, reconfigure the RMI registry service is listen on port 11333.
Hope this helps.

HAL Planning Adapter Error

I am getting the following error when I am creating a newplanning adapter. Error unmarshaling return; nested exceptionis:java.lang.ClassNotFoundException:com.hyperionlicence.LicenseAccessException(no security manager:RMI class loaderdisabled) Did anyone face this type of error before. You input is greatly appreciated. thanks

well its seems like a problem with java plug in version.....set default JRE version 1.3.0_05 in control panel andchange the JRE 1.4.1_02 in the system environment variables to1.3.0_05 <table><tr valign="top"><td></td></tr></table>

Problem in Planning Adapter in HAL

Hii have the following problem in HAL"When i drag the planning adapter on to flow diagram andgive the server address.it gave me an error " HspBeanFactory" andclosed off.did anyone faced similar problem. help me please 

First try restarting the Hyperion Planning Server and HBR Server, and verifying that the Hyperion RMI Registry Service is set to Automatic start and that it has started correctly. If that doesnt solve the problem, open the "hyperionRMI_Classpath.properties" file (Hyperion\Common\RMI\1.0.0\) and make sure that you have the path to the HspJS.jar file. It should look something like this (your file will have more entries then the following example) %HYPERION_HOME%\common\RMI\1.0.0;H:\Planning\Utils\HspJS.jar;...;... Make sure to restart the RMI service or rebooth the server before testing. C. Logan InterTech Solutions Inc. [email protected]

Planning Adapter for HAL

Hi,
I know we can use HAl in Hyperion Planning 9.3.1.1. which version of Planning adapter should I use in oracle edelivery.
I see
Hyperion Data Integration management adapter for Planning 9.3.1.1.
Is this is the one we have to use for HAL?
or is there any other setup file I have to look for?
Thanks

Hi,
All the HAL adapters are available through the "Hyperion Application Link (9.x) Media Pack" link which is in the "Hyperion Performance Management and BI" section on edelivery, a password will be required to download anything HAL related as it comes under a different licensing agreement now.
Cheers
John
http://john-goodwin.blogspot.com/

HAL - 9.2.3 - Error when pulling Planning Adapter into a HAL workflow

I receive the following error when pulling a Planning adapter into the workflow:
error unmarshalling return; nested exception is: java.io.EOFException
I receive a similar error when trying to run one of my already created HAL integrations
VBIS Exception set by 'Planning1' in 'Flow Diagram1': java.lang.Exception: error unmarshalling return; nested exception is: java.io.EOFException
Any help that you can provide would be greatly appreciated.

Hi,
Sounds like a JRE problem.Try the following:
Go To the Hyperion\Common\RMI\1.0.0 folder and double click UninstallHyperionNTServiceRMI.cmd.
This will uninstall the RMI service. Log out of the machine and log back in.
Browse to the same folder and edit InstallHyperionNTServiceRMI.cmd.
Check the following:
set JRE_HOME=c:\Hyperion\common\JDK\Sun\1.4.2\jre (make sure the path does exist)
Further down change the following:
HyperionJavaService -install HyperionRMIRegistry "%JRE_HOME%\bin\jvm.dll"
to
HyperionJavaService -install HyperionRMIRegistry "%JRE_HOME%\bin\server\jvm.dll"
Save the changes and reinstall the RMI service.
Start the RMI service and do a telnet to port 11333: cmd->telnet servername 11333 and you should be getting a blank screen.
Then try connecting to the Planning adapter again.
Good luck.
Seb
www.taysols.com.au

Need info regarding planning adapter for HAL

Hi all
We are using 9.3.1 on windows machine, I am wondering for HspJsHome.properties file where I can check the port number for RMI .
i just want to double check the port no for RMI is registered in planning or not.
I am unable to connect planning adapter with planning server, to my surprise i am unable to see HspJSHome.prper file in
Hyperion\HyperionPlanning\AppServer\InstalledApps\Tomcat\5.0.28\ HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes
we are using tomcat I am unable to see the folders from Hyperionplanning\webapps I didn't find them , after 5.0.28 i have only two bat files of start and stop planning bat files, and also I do have only one folder with name InstallableApps not InstalledApps ...in the above given path.
Did I make any mistake in installation.
I already created the planning applicattion and initialized the wrkforce and capex too...
regards
Mar

Hi,
Version 9.3.x does not use the HspJSHome.properties file, all this information is now stored in the relational database for the planning system.
Cheers
John

How to use ODI and Planning Adapter.

How to load the dimensions in planning using ODI and Planning Adapter. I am just looking for a functionality that we used to have with HAL and Planning.

Hi,
Have a read of my blog it should give you all the information you need.
Cheers
John
http://john-goodwin.blogspot.com/

How to install ODI Planning Adapter

Hi Friends,
One of my client is trying to install the ODI Planning Adapter. After unzip of the file we have two folders: Drivers and impexp. I recall that we are supposed to copy the contents of these folders somewhere but I cannot find documentation and what I should do.
Can anyone suggest on how to instal planning adapter.I searched for documentation in odiap_93110_readme.pdf I don't see instruction on how to install the ODI planning adapter.
If anyone can give me a step by step procedure to instal planning adapter it would be great help.
Regards.

Hi All,
I am new to oracle BI space . i need to load data from my flat file source to hyperion planning 9.3.0.1 application.
Here are the steps i followed:
downloaded and installed ODI 10.1.3.4.
i could find the adpater for hyperion planning 9.3.0.1 for ODI.
Can somebody please help me out and tell me where the above mentioned installation file is located in internet.please share the location...
Some how or the other i could able to find the odiap_93110.pdf file which lets me to know about installation instructions.
Thanks & Regards,
Lokesh

Installing Oracle Data Integratior Planning Adapter Assistance

Does any know how to install the Planning Adapter for ODI? I cannot find any documentation that actually explains how to do the install. The only documentation I can find on the Hyperion site is a README file. The ODI installation and user guide do not adress specifically how to install an individual adapter. Maybe I'm missing something.

Hi,
What version of ODI have you installed, version 10.1.3.5 comes installed with all the planning required modules.
Cheers
John
http://john-goodwin.blogspot.com/

ODI Planning Adapter installation

I unzipped the planning adapter installation files in the oracledi folder. I was wondering, do I I copy the contents of the drivers and impexp for the planning adapter into the original drivers and impexp folder? Thanks for any assistance.
regards

Hi,
Yes you copy the jar files into the oracledi\drivers directory
All the xml files can go into the oracledi\impexp directory
Cheers
John
http://john-goodwin.blogspot.com/

Planning adapter in HAL

Hi,
I have installaed Vignette Integration studio i.e HAL 9.2 version and after that installed hadp 9.2 version.
When I open studio, Planning adaptor is available...
During installation, it displayed Planning adaptor is compatible with it.
Do it need to perform any manual operations for it.
Please give the suggestions...
Naveen

Hi John,
Planning adaptor is not visible in Adaptor library. When I try to add the Hyperion Planning adaptor library using Tools->Adaptor Library->Browse, it is saying adaptor not installed properly. But during installation showed installation successful... What could be the problem....

Issue with HAL - Excel Adapter

Hi
We are using HAL V7. and excel 2007 . I am truing to use excel adapter in HAL . Here I guess the adapter is not supporting excel 2007. So I am getting the below error when I pull the excel adapter.
Update the Vegneete BIS Installation registry by addign the current class id or excel sheet as the ExcelCLSID value of the key. HKEY_LOCAL_MACHINE\Software\Vignette\eIntegrate\4.2\Workarounds.
I am littlie confused overhere. I went to the particular location .,do I need to change the ExcelCLSID key?? if so with what key I need to replace... where I can I find the classid for excel 2007.
Thank You for your time !!!1

I find it incredibly amusing that they have a registry key labelled "Workarounds". If that isn't the sign of a lame-o product, I don't know what is.
But you didn't ask to hear me rant and rave about HAL -- you want help.
I never, in my many somewhat painful interactions with HAL, used the Excel adaptor. Is it trying to instantiate Excel itself, or just read from/write to a file? Many products don't need an instance of Excel to do Excel file operations (think of Dodeca, or OpenOffice), although perhaps HAL is not one of them.
If you tried to make the file a .xls, does it work? Or could you make the file a .txt or .csv and just avoid the whole Excel issue altogether?
Regards,
Cameron Lackpour

Issue with HAL essbase adapter

Hi Experts
I have an issue with HAL,I got the below error when I tried to use essbase adapter, the HAL version is 7
java.Lang.NoClassDefFoundError
I know this is known error ...most of the forums are telling this is error related to Environment Variables...but I dont know how to fix as I am unaware of this....java..... classes..bla bla bla..
I installed HAL in c drive, Can anyone help me ...how to fix this issue....
Thank You
M.S

Go to control panel->system->system properties->advance->environmental variables. You should have something like this "C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter" in your classpath variable. Check you installation on your "C:\" drive to get the correct path. Hope this helps.

How to export data from Elimination Value dimension member by HAL HFM adapter?

Good day! Is it possible to export HFM 4.0.5 data with HAL from the <Elimination> Value dimension member? In 3.* versions it wasn't and there is Known Issue in the "HFM 3.* Adapter Read Me" file: "The Hyperion Financial Management Adapter exports data using the <entity currency> Value dimension member. The documentation erroneously states that there is a port available for the Value dimension" But there is not such point in the same file for HFM 4.0.5 AND there is Value port in the HFM 4.0.5. Adapter. Thanks! Regards, Georgy 

In the first approch, try to change the exporting parameter type REF TO DATA.
Try like:
CLASS lcl_test DEFINITION.
PUBLIC SECTION.
 DATA: t_mara TYPE HASHED TABLE OF mara WITH UNIQUE KEY matnr.
 METHODS:
 constructor,
 get
 IMPORTING
 if_matnr TYPE matnr
 EXPORTING
 ea_mara TYPE REF TO data.
ENDCLASS. "lcl_test DEFINITION
START-OF-SELECTION.
DATA: lo_test TYPE REF TO lcl_test,
 lr_data TYPE REF TO data.
FIELD-SYMBOLS: <fa_mara> TYPE ANY,
 <f_field> TYPE ANY.
CREATE OBJECT lo_test.
lo_test->get(
 EXPORTING
 if_matnr = '000000000077000000' " << Replace Your Material
 IMPORTING
 ea_mara = lr_data ).
ASSIGN lr_data->* TO <fa_mara>.
ASSIGN COMPONENT 'ERSDA' OF STRUCTURE <fa_mara> TO <f_field>.
<f_field> = space.
WRITE: 'Done'.
CLASS lcl_test IMPLEMENTATION.
METHOD constructor.
 SELECT * INTO TABLE t_mara
 FROM mara
 UP TO 10 ROWS.
ENDMETHOD. "constructor
METHOD get.
 FIELD-SYMBOLS: <lfs_mara> LIKE LINE OF me->t_mara.
 READ TABLE me->t_mara ASSIGNING <lfs_mara> WITH KEY matnr = if_matnr.
 GET REFERENCE OF <lfs_mara> INTO ea_mara.
ENDMETHOD. "get
ENDCLASS. "lcl_test IMPLEMENTATION
Regards,
Naimesh Patel

HAL Planning Adapter 9.2.0.0.0

Similar Messages

Maybe you are looking for