HAL - Unabled to write or access Vignette's HAL log file (access denied)

Hi everybody,
In Vignette in the EXE, in "LOGGING" tab,
I choose "Enabled logging" "Log Messages to"
"File" \mfqhaldv01\RAPFIN\DEVL\TRAITEMENT\RAPFIN02_BALVER.log
if I have a access denied on this file, how can I do to know if I have a problem I can't get any information because I don't have access to.
What can I do to see the error message ?
Thanks & Regards.
Eric.

One, I would see about getting access to that share. If you can not, I would save off the copy of hte .prp and run it or create a new .exe with a logging path you can access. This has to be done in the HAL studio.....hopefully can just reconfigure and get the file that way.

Similar Messages

Can FTP-access to field point log file interrupt the running program?

Can FTP-access to field point log file interrupt the running program?
We have a problem where our factory process control program on a Field Pointer suddenly stops the process. We are running the development system on a PC, wich deploys the program on the Field point, with user interface on the PC. Quite often the process stops for no apparent reason. I'm not sure right now if the control program on the Field Point is still running or if it stops. We use FTP from a distant PC (over VPN) directly to the Field Point to check if the process is running, by looking for date and size of log files produced during running process. I've never opened och copied any log file during process run, because this I'm sure this would cause problems for new log entries to be written. But can the mere looking at the log folder via XP-pros ftp-functionality cause the Field Point to have problems writing data to a log file?
I'm not sure how windows XP pro handles "my network places" when it comes to FTP, it look that it keeps some kind of local copy of the folders, or at least the files opened.
Next version of the program will have only basic functionality on the Field Point, leaving logging etc. to another program on the PC, but right now we are stuck with this system.
Ola A

It turned out that the problem lies in the harware of the production machine, it was not a labiew-program problem at all!
Ola

Log file (access.log) of the internal ITS

Hello,
anybody know how to access the logfiles of the internal ITS. In particularly im looking for the log file access.log which you had for the external ITS accessable over the ITS admin page http://<servername>/scripts/wgate/admin/!
The log file loged all users and the transaction they accessed over the time in the format
2006/10/21 18:39:16.093, 0 #197349: IP ???.???.???.???, -its_ping
Thanks in advance,
Kai Mattern

hi
good
go through these links, i hope these ll help you to solve your problem.
http://www.hp.com/hpbooks/prentice/chapters/0130280844.pdf
http://help.sap.com/saphelp_46c/helpdata/en/5d/ca5237943a1e64e10000009b38f8cf/content.htm
thanks
mrutyun^

Getting script to write output to console and a log file

Hello everyone. I'm working on a script that will search through a bunch of folders, pull anything larger than 50Kb out and then write a log file of what it moved. What I have so far is what I've pieced together through my research. It works, but it doesn't
write anything to the console which I believe is why my log isn't showing any info.
Here's the code:
get-ChildItem -path $path -recurse -ErrorAction "SilentlyContinue" -include $Extension | ? {$_.GetType().Name -eq "FileInfo" } | where-Object {$_.Length -gt $size} | Copy-Item -Destination c:\test|results_big | Out=File c:\test\log.txt
What I've been trying to do is add a | write-host in there somewhere, but all I get is countless red text with a variety of messages reminding me of my ignorance :). Thoughts?

Hi Scotty,
here's an edit:
Get-ChildItem -path $path -recurse -ErrorAction "SilentlyContinue" -include $Extension | Where-Object { (-not $_.PSIsContainer) -and ($_.Length -gt $size)} | Copy-Item -Destination "c:\test_results_big" -PassThru | Out-File "c:\test\log.txt"
Soo, what did I change?
- Replaced checking for item type I checked the PSIsContainer property (which is true for folders)
- Combined the two Where-Object calls into a single one
- Fixed the path for copy-item destination
- Added the -PassThru parameter - otherwise Copy-Item won't give output causing you to export nothing to file.
- Fixed a typo - Out=File --> Out-File
Cheers,
Fred
There's no place like 127.0.0.1

Disappear Log file(access log).. humm..

DS5.1sp1 on SunOS 8
suddenly access log was disappear about two month ago.
so, log file is only 2 ~ 3 exist.
why? Any solutions? Please

What is the configuration of your log files?
What are your configured
- maximum number of logs?
- total log size?
- oldest log file?
Check this first.

Cannot rotate HTTP Log File (access.log)

Hi,
Both rotation types(size and date) cannot be rotated.
For size, I set the "Maximum Log File Size" to 1000k,
but the file is 3000K now and still increasing.
For date, I set teh "Rotation Period" to 1440 minutes,
but the file still cannnot rotate after few days.
Does any one know the problem?
Thanks

It is a reported bug in 6.0.
Is it fixed in 8.1.0

Why can't read access log file in real-time? (Oracle Weblogic Server 10.3)

We can't read access log file in real-time. If access log is rotation to new file so can read access log file but can't read real-time.
*** Oracle Weblogic Server versions 10 R3

what's your meaning? try this command "tail -f access.log".
Threre is a buffer about 8K for WebLogic to write the access info into the log files, so you can't see the access info untill the buffer is full.

Debugging and file access

Hi!
I have a problem developing a midlet for MIDP2.0
In emulators, everything works fine but I observed some funny behavoir when running that midlet on the mobile phone. Anyway, I am not asking for a solution for that problem, but for a general one:
What is in your opinion the best way to debug the midlet on the mobile phone (not in emulator because it works there...)? How do you write debug messages? Is there a possibility to write something into some kind of log file? I know there is no access to the file system in general, but can I maybe wreite something into a file which is in the JAR file? Please post some example code if there is any possibility to do this =)
Cheers!

You can write the data into the RMS, and pack a second MIDlet in the suite that allows you to read the data.
A couple of other options are displaying it on screen (good for quick fixes and catching small bugs), or sending the data over the network and logging it on the server (in theory the best solution, but in practice if the MIDlet is not networked to begin with you might end up having more bugs and wierd behaviour from the network code than the application you are trying to debug).
shmoove

Problems with Ericsson F3507g card - does anyone understand Access Connections log files?

I am having big problems getting an f3507g mobile broadband card working on a T500 running XP Pro.
Have had problems with several machines all supplied in the same batch and it turns out that the BIOS needs to be reset to defaults post installation of the card for it to be properly recognised by the OS.
Anyway, all machines are now fixed with the exception of one....
Everything looks okay on the surface - the F3507g card is showing under Device Manager, just to be sure I've reinstalled Access Connections and loaded drivers for the card. I know that the driver install was successful because it pinged up with the standard driver install success message - 'Windows found new hardware...' about half a dozen times immediately following the install. Having done the driver install I attempted connection and the CA Internet Security Suite Firewall popped up asking whether I wanted to accept the device as a 'Safe' device - clicked yes to that.
However, attempting connection never works
I've tried enabling logging and the log file produced together with a fault report is here.
I have tried the SIM card under test in another machine and it works. I have also swapped the HDD out of another identical brand new machine and it works with the hardware including the Ericsson card - so the issue has to be software related...
I could reimage but the user will loose some graphic design application software which is very difficult to reinstall.
Hope someone that understands Access Connections WWAN debug log files or has had a similar experience might be able to point me in the right direction...
Many thanks

@ Deadloss,
have you checked the power settings in the cards properties? Not that windows is turning it off?
Are you using a factory image or your own custom image, I'm thinking that maybe a reimage might help ??
@ schm1tty,
T-Mobile SIMs work fine, what problems are you having? Maybe you could start a new thread so as not to hijack this one.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

[SOLVED] Writting to log file on Oracle AS in ADF BC

Hi!
I'm trying to write some information to any of the log files on Oracle Application Server but can't seem to get it working.
I have a http servlet class in which I try to log records like this:
Logger loLogger = Logger.getAnonymousLogger();
loLogger.info("HttpServlet: doGet start!");This code displays
1.4.2008 9:44:02 package.HttpServlet doGet
INFO: HttpServlet: doGet start!
in JDeveloper output window, but after deployment to AS it is not written to any of the files. I do not use a custom logger or log files in my application so my question is: how can I write information to any of the log files on AS (for example logs in <ORACLE_HOME>\opmn\logs folder or in log.xml file in oc4j folder of j2ee home log)?
I've been reading about j2ee logging but as I said, can't get it to work. Are there any ADF classes to do this?
Thanks,
regards!

Hi!
Thank you both for your effort. Both ways work now, I messed something up at the beginning.
Logger loLogger = Logger.getAnonymousLogger();
loLogger.info("method start!");writes to 'default_group~home~default_group~1.log' file in opmn/logs directory, while
ADFLogger loADFLogger = ADFLogger.createADFLogger("oracle");
loADFLogger.log(ADFLogger.NOTIFICATION, "method start!");writes to 'log.xml' in j2ee\home\log\home_default_group_1\oc4j directory.
Now I just have to decide which is better for me ;).
BB

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

ORA-27072: File I/O error, OSD-04008: WriteFile() failure, unable to write

Hi,
Im using oracle 10.2.0.1 on the Windows server 2003,
Every day at 03:30AM my database goes down, with following entry in the alert log.
=======================================================================================
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_lgwr_7708.trc:
ORA-00345: redo log write error block 21111 count 12
ORA-00312: online log 1 thread 1: 'F:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLINT\REDO01.LOG'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Thu Nov 24 03:36:46 2011
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_lgwr_7708.trc:
ORA-00340: IO error processing online log 1 of thread 1
ORA-00345: redo log write error block 21111 count 12
ORA-00312: online log 1 thread 1: 'F:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLINT\REDO01.LOG'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Thu Nov 24 03:36:46 2011
LGWR: terminating instance due to error 340
Thu Nov 24 03:36:46 2011
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_pmon_8236.trc:
ORA-00340: IO error processing online log of thread
=================================================================================
We have raised the SR with ORACLE, after uploading the trace & alert log, reply from oracle as follows:
Generic Note
I couldn't find any issue in the trace file.
I think you need to open a ticket to the O/S vendor to identify which process is locking the file.
====================================================================================
We have move the database from F: to G:, problem got resolved, but we cant keep the database in G: for more time as the space issue, We have to move the database back to F: , and we are facing the issue on F:
can any body help, how to monitor the windows process locking the database files,
or the utility that can log the errors at the same time when database goes down.
Thanks,

Hello,
You can have a look to the windows Event Viewer, see if something happens around 03:30.
Do you have an antivirus on your server ?
At what time does your backup run ?
Regards,
Sylvie

Error: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.

when trying to download new messages into Thunderbird, I keep getting the error message:
Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.
what does this mean and how do I correct it???
thanks

I have this problem too, but my Inbox is empty. There are 125 emails waiting on the server, including one i just sent from another address.
The site you recommended is "having difficulties".
May 4
I have now accessed the KB article above. None of the recommended actions made a difference. I deleted about half the 130 emails awaiting download from web-mail, but still got the same error. I can't clean out the inbox because I can't download emails yo it :-( I have 3 other addresses operating under the same server satisfactorily.

Aperture unable to write library

After updating to Aperture 3.6 I get a pop up informing me I need to update my library only after I click on upgrade I get another pop up that says:
Unable to write to Library "Aperture Library"
Check that the volume has sufficient free disk space.
I've checked my storage and should have more than enough storage so I am not sure what else to do.

I've checked my storage and should have more than enough storage so I am not sure what else to do.
How much free storage do you have? Upgrading an Aperture library can temporarily need considerably more storage, if your library is large. You should have at least 20GB free storage, better more.
But you probably just upgraded to Yosemite. And the Yosemite upgrade has occasionally caused permission problems. If your Aperture library is in your Home folder, I'd try to repair the permissions and access control lists on your Home folder.
See this post by Linc Davis: Re: Reset Home Folder permissions and ACLs Error

Trying to install/format an INTERNAL hard drive using Disk Utility gives me "Error: -69760: Unable to write to the last block of the device". Is that a hardware problem and what could be done about it?

*** PLEASE NOTE*** - This is a query about an INTERNAL HDD not an external one. Thanks.
My Mac is a late 2009 model and the current hard drive recently failed. So I bought a new one, exactly the same, albeit 750gb instead of 500gb. The HDD is a Seagate Momentus 7200. Before the my current drive failed I made a time machine back up to an external USB HDD. I've inserted the HDD into the bottom of my Mac, plugged in the USB and started my machine pressing the 'Option' ([ALT]) key. I go into Disk Utility to try and format the new HDD by creating a new partition but I keep getting the messages,
"Error: -69760: Unable to write to the last block of the device"
or
"POSIX: could not allocate memory"
This is actaully the third HDD I've tried. The first was another Seagate Momentus 7200 500gb, but this time it was a newer model (model number ended in 423AS instead of 420AS - the new one I am trying ends with 420AS, which is the same as the current HDD). I then tried a Western Digital drive but that one didn't even show up in DU. Forums and tech support are suggesting it's faults with the HDDs but surely not three in a row?
Could this be an issue with another part of my Mac?
Is there anything else I can do to format the HDD, have I missed a crucial step?

Did you ever get a resolution to this issue?
I am having that exact error with a new 512GB SSD from Crucial, in a 15" MBP mid-2010.
I really wonder now if the stupid SATA cable could be bad - causing the initial SSD fail. I am replacing it with the EXACT same drive, and getting that "last block" error when i partition in the GUI or from command-line.
thanks!

HAL - Unabled to write or access Vignette's HAL log file (access denied)

Similar Messages

Maybe you are looking for