Half a chime (cuts off), no video, no boot

My G5 just crashed launching a Protools session. It will no longer boot. It chimes - but the chime sound is cut off half way. The fans power up and I can hear the drives spin up. I've removed PCI cards, swapped drives, swapped RAM... nothing helps. No video, no response from the keyboard (trying a PRAM reset for example).
Did I just loose a logic board? Any suggestions would be much appreciated.

more info:
It just booted after letting it sit for almost an hour.
Passed Techtool hardware tests. I just started another loop....
Crash!
Just shut down with no display or fans - light still on though.
Something overheating here? I'm hoping someone has an opinion as to logic board or CPU failure - or something else (temp sensor?).
Any help or comments would be very much appreciated.
What the...
I hit the power button (expecting it to either shut off or make me hold it for 10 sec ts shut down) and it acted like it woke from sleep and continued with the Techtool test where it left off.
Then it shut down again after 15 sec or so.
Repeat... same.
Opinions please!

Similar Messages

  • Bottom one half inch is cut off.

    When I try to print the bottom half inch is cut off. This happens when I copy from the printer as well. The Print and Scan Doctor does nothing. Can someone help?

    Hi,
    Please note: your HP Deskjet 2540 does NOT support borderless (no border) printing therefore you have to allow for blank spaces (borders) in your designs.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • IMovie Importing cuts off during video capture

    Hi!
    I am in the process of importing a video footage from my mini dv cam tape into iMovie. It seems that iMovie cuts off the video capture after 16 minutes into the duration. I have a 60-minute footage that needs to be captured for iMovie.
    Is there a time limit for video captures within iMovie?
    Any tips will be greatly appreciated.
    Thanks.

    Hi
    Can it be
    - Ken Burns effect
    - Zoom in effect
    - Image stabilization
    All of them enlarhe the picture. Turn them off
    - set Crop to ADJUST - and all will be there (letterboxed or columned)
    Yours Bengt W

  • Bottom half of text cut off

    My printer: Photosmart C6280 All-in-one. The printer connects to my wireless router via Ethernet cable. Two computers use this printer on a wireless home network. The problem has occurred with both computers. Both computers (an HP desktop and a Gateway laptop) run Windows Vista Home Premium. The problem I describe occurs when printing text from Microsoft Word 2007.
    From time to time, the last line of text in a document or a label comes out with the lower half of the entire bottom line cut off. The odd thing is that sometimes (but not always), I can resend the print job and get good results. For example, on one occasion after encountering this problem two consecutive times with a particular document, I re-sent the print job and used the back side of a used sheet. It printed correctly, so I put a new sheet of paper into the tray and tried a fourth time. This time, I got the same unacceptable result! Tried a fifth time and got a good print.
    One important point: The problem has never once occurred when I print photos. The problem seems to occur only when printing text.

    We were also having this problem but after researching around on the net and finding some other people with the same issue, we found the following fix worked (based on a Windows 7/Vista Machine):
    Click Start > Devices and Printers
    Right click 'HP Photosmart C7200 series' and click Printer Properties
    Click the Ports tab
    Uncheck Enable Bidirectional Support
    For XP users, you can get to the same thing by finding your printer in the "Printers" area of Control Panel. Following this, opening the properties for your printer from there either by right clicking directly on the printer, or by double clicking the printer and then in that window selecting Printer > Properties.
    We found that the above worked for us so I hope it works for some of you too.

  • Audio cuts off then video moments later for Jabber users when content is shared during a multipoint VC

           If a presentation* is being shown from a VC end point/or by Jabber, the audio cuts off, then the video of the Jabber user freezes. The call has not ended on our end we can still hear and see them. A few moments later their video on our end freezes and the audio is lost. The call is finally terminated a few moments after.
           When this happens to the Jabber participant they either have to restart Jabber or in some case have to reboot their PC
           The Jabber participant can be cut off from their class 2 to 3 times  throughout the duration of the class
           This happens over all the MCU\blades, so doesn’t  appear to be blade specific
           Only appears to happen in multi –point conferences not in point to point calls
    *Presentation: This can be anything from a word document, to a PowerPoint presentation to a web browser
    The warning they receive says:
    The application has encountered a terminal problem.
    Location:
    Message: assertion failed. (link_ret = = GST_PAD_LINK_OK)
    Domain: <no domain>

    Is this problem specific to Jabber clients, or Jabber Guest? If the former, you'll have better luck over on the Jabber client forum:
    https://supportforums.cisco.com/community/4551/jabber-pilot-support

  • I bought an album and half the songs cut off at the 1 minute mark

    I bought an album off of the iTunes store and when I went to play them, most of them cut off and go to the next song around the one minute mark even though there is still like 2 minutes left. I tried deleating and redownloading them but the problem is still there.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • Wow...the hits just keep comin' - CS5 cut off my video...!!

    I have a video I just made and exported in Camtasia...it's just ScreenCast PowerPoint video...
    Export settings =
    1024X768
    AVI
    Camtasia Codec
    30FPS
    I imported in CS5 and in the timeline it cut the video off maybe 75% - 85% of the way thru -- it just stops at that point...
    the exported version is full length --- no problems...but like I said...in CS5 - it's cutting it off...
    what the hell is this and how to fix?
    thanks for your help

    >ScreenCast PowerPoint video
    I know that PPro does not directly read PowerPoint, so I will GUESS that whatever ScreenCast is, it is not creating a file that is 100% compatible with PPro

  • Start/End Cut Off

    I've noticed in Encore CS 4 and 5.5, when I dynamically link from Premiere Pro (havent tried not dynamically linking yet) that the first half second and the last half second get cut off.
    To compensate I just add a second of black at the start and at the end.
    Not a big deal, but it gets annoying when I forget and it cuts out half way through my fade in/out.
    Anyone else get this? Is this normal? Any settings I should adjust?

    I agree with Jim comptletely. Many high-end decks take about 02 sec. to lock into the Audio, as well.
    The Black Video at the start, and end has a second benefit - when changing Timelines, etc., there is often a black "flash," as the laser repositions. That will happen during the black, so the user will never see it.
    Good luck,
    Hunt

  • Modern applications getting cut off.

    In most of the modern applications such as mail store music, In settings and accounts it only opens halfway. Also the search bar in store is half or more cut off.
    Has anyone else had this issue or know a fix?

    Hi,
    What's the build number of Windows 10 Technical Preview?
    On my build 10049 lab machine, it indeed exists this issue. Thus here I would suggest you post your feedback directly to our Feedback channel:
    http://windows.microsoft.com/en-in/windows/preview-how-to#how-to=tab7
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • JInternalFrame - print cut off

    Hi there,
    I have tried to print out the JInternalFrame's content by overriding the print() mentod.
    However, it seems only those that shown on screen was printed out, i.e., if I resize the frame to a smaller size, I print out fewer things.
    On top of that, even if I maximize the frame, only half the page is print out (i.e., I got half a blank page which I need to fill).
    Here is my code for printing the frame
    public class JPInternalFrame extends JInternalFrame implements Printable {
       public JPInternalFrame() { }
       public int print(Graphics g, PageFormat pf, int pi) throws PrinterException {
       if (pi >= 1) {
           return Printable.PAGE_EXISTS;
       Graphics2D newG = (Graphics2D) g;
       newG.setClip(0,0,650,850); // reset to a new clip cooedinate
       newG.scale(0.6,0.6);
       Font  f = new Font("Arial",Font.PLAIN,10);
       newG.setFont(f);
       RepaintManager currentManager = RepaintManager.currentManager(this);
       currentManager.setDoubleBufferingEnabled(false);
       super.paintAll(newG);
       currentManager.setDoubleBufferingEnabled(true);
       return Printable.PAGE_EXISTS;
    .and
    public void actionPerformed(ActionEvent e) {
          PrinterJob printJob = PrinterJob.getPrinterJob();\
          printJob.setPrintable(one);
          if (printJob.printDialog())
          try { printJob.print(); } catch (Exception PrintException) { }
    }Thanks for your time.
    Sam

    Hi there,
    I just found out that my JInternal Frame can now print a full page. But this only happens when I open multiple JInternalFrame.
    - If I only open 1 frame, it only print half a page (cut off at the middle);
    - If I open multiple, print any one of them would be a full page;
    - If I open multiple 1st, close them down to 1 frame, it would still print a full page;
    - If I close them all, open 1 frame and print, it would back to half-page-cut-off...
    Would anyone able to give me some direction please?
    Much appericate for any help!
    Cheers
    Sam

  • Left side of menu screen cut off on tv but not on computer?

    i just finished making an imovie that i transferred over to idvd & burned a few dvd's...brought it home & tested it out on the computer & it looks great!
    but when i use it in both our tv's (one that is a wide flat screen & one that is more 'standard), the left side of the menu is completely cut off. the video plays ok (although on the flat screen lcd tv, everything is stretched out), but it is just several letters in the title that are cut off.
    any way to fix this?
    thanks!

    I didn't see anywhere to set the screen size, so I'm not sure (I used a computer at work to make it) but I have the same problem when playing it on both the widescreen 16:9 and the standard 4:3 tv's in my house, so I wasn't sure if it had to do with that?

  • Adobe Media Encoder cuts off video layer when the Ultra Key effect is applied

    I am working on a Mac (10.8.5) using the latest verison of Premiere Pro CC. I am using Ultra Key to remove the chroma key background from the "talent layer" and adding a "new background layer" behind the talent video layer. When I export directly from Premiere, the sequence exports as expected. However, I have many sequences, and wish to speed up the  process using Adobe Media Encoder. When I export the same sequence using Adobe Media Encoder, the top half of the "talent layer" is completly cut off:
    The issue has something to do with the Ultra key effect because when I remove the effect from the "talent layer" it exports in tact (with a chroma key background of course). Adobe Media Encoder CC is up to date as well; are there any known bugs with Media Encoder CC and the Ultra Key effect in Premiere Pro?
    Thanks!

  • Encore Cuts off about 15 minutes of my video after I author it, Please Help!

    Hello everyone,
    I am not really a stranger to Adobe products but I am having a problem with Encore which is driving me crazy.  I am authoring a dvd of some home movies and a slide show to send to some relatives as a Christmas gift.  I have to send it out so it absolutely MUST be done within three or four days.  I have done every single thing perfectly and I finally went to build an ISO of the final result of all my hard work, only to find that once I mount the image and play it back on PowerDVD, the last 15 minutes or so of the main movie was cut off!
    What is going on here?  It shows up perfectly in Encore in the Timeline I set up.  The individual files I encoded play perfectly all the way through.  The main movie is long, about 2 hours and 41 minutes.  I expect to be using nearly all the space of a dual layer dvd, roughly 8gb or so.  Anyway, on the authored DVD, the runtime of the main movie is just 2 hours and 29 minutes.  It simply stops at that point and goes back to the main menu. 
    Also, as perhaps should be expected, my chapter points on the second half of the movie are screwed up, no doubt due to the screwed up timeline.
    Anyway, how can I get the whole movie to show up on my encoded DVD?
    I know it is not a DVD space issue because it comes out to just over 8 gb.  And besides, I am not yet burning it to a disc, I am creating an ISO to test so size shouldn't even be an issue.  If space WAS an issue, I would just re encode the video with a lower bitrate until I could barely fit it on a dual layer disc.  But as I said, I am sure that is not even relevent here.
    Could someone please help me here?  A very important Christmas gift is dependent on me being able to finish this project in Encore.
    Thanks so much.

    Please post a screenshot of the flowchart.
    I think the single 2 hour 40 minute video is asking for trouble if you don't need it to be so long. In a compilation type DVD, it is usually not necessary. If you are putting multiple videos on one timeline, that is also more likely to encounter problems than making each video its own timeline and using a playlist for a "play all."
    Despite your confidence that certain things cannot be issues, they can be.
    It does sound like all should be well.
    Also, as perhaps should be expected, my chapter points on the second half of the movie are screwed up, no doubt due to the screwed up timeline.
    Also, chapter problems may be causing the truncated movie.

  • Cutting edges of video off?

    Hello,
    I was just curious if there is any way I can cut the right of left half almost off my video?  The way I currently record my videos have it so my face is on the far left side of the camera and I just place the rest of the blank video off frame so it looks like my "face cam" is just a square.  Is there anyway to get rid of that extra stuff I'm placing off frame so I just have the part of the shot I'm interested in?  My webcam and camcorder record in widescreen but when it comes to editing I'd like that extra space to not be there.  I've attached an image as an example below
    Sorry if it's poor quality.  I'm at work and can't access my home computer from here.  Basically what I am asking is, is there any way for me to make a letterbox widescreen video file and make it record or be edited into a square?

    Right now, when I click on a track in the simulate mode, the pic shows normal rez at first, then grows at the last 2nd to go beyond the edges of the 'safe area' cutting the picture or video off on each side.
    How can I adjust this so that when played on a regular ( NOT widesceen ) TV, it will play within the boundries?
    Television doesn't display all of the image area - that's the way it was designed. And that's why there are Action Safe and Title Safe areas - so you'll know where most TVs will cut off the image so you can keep the important things within that area.
    Even the movies you rent don't show the entire image area. You can check for yourself; play a rental DVD on professional TV monitor with underscan capabilities. While the movie plays, hit the underscan button and you'll see the entire image area.
    -DH

  • EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.

    EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.  This issue occurs for some users only.I tried the same url in google chrome and is working fine.
    Can you please help.
    Please find the attached screenshot.

    Hi BJ1986,
    According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
    as a trusted site in IE browser to check this issue again.
    If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
    steps below to troubleshoot the issue:
    Click Tools -> Internet options.
    Switch to the Security tab, click Local intranet, and then select Default level.
    Switch to the Advanced tab, and click Restore advanced settings.
    Temporarily disable third party add-ons. For detailed steps, please see the link below: 
    http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for