Half duplex or full duplex configuration for MDS9124 management port?

Hi All,
Is it possible to set the management port of mds 9124 about half or full duplex configuration?
I want to correct following error:
Jun 13 10:27:20.799 GMT: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet4/18 (not half duplex), with mtw1pc02bs0(FOX1450G8QG) mgmt0 (half duplex).
it seems mds 9124 set his port to half duplex.
Dennis

You may want to check this thread :
https://supportforums.cisco.com/thread/2059109
Else try the following :
switch# config terminal
switch(config)#
switch(config)# interface mgmt0
switch(config-if)# switchport duplex full
switch(config)# exit
switch#
switch# copy running-config startup-config
Also, I would suggest you check what the counterpart of your MDS switch mgmt interface is set to (i.e. is it set to autoneg, then try setting it to fix speed/duplex or the other way around).

Similar Messages

Configuration for Transaction Management

          Hi,
          I am working with Weblogic Server SP1. I am facing a problem in configuring for
          Transaction Management.
          I have a session EJB say SEJB and two entity EJB say EEJB1 and EEJB2. EEJB1 is
          for the parent table
          and EEJB2 is for the child table.
          I have two records in the database REC1 and REC2.
          REC2 has dependencies and cannot be deleted, while REC1 can be deleted.
          In weblogic-ejb-jar.xml I have configured as follows:
          <weblogic-enterprise-bean>
          <ejb-name>SEJB</ejb-name>
          <stateless-session-descriptor>
          <pool>
          <max-beans-in-free-pool>300</max-beans-in-free-pool>
          <initial-beans-in-free-pool>150</initial-beans-in-free-pool>
          </pool>
          </stateless-session-descriptor>
          <reference-descriptor>
               <ejb-reference-description>
               <ejb-ref-name>EEJB</ejb-ref-name>
               <jndi-name>EEJBean</jndi-name>
               </ejb-reference-description>
               </reference-descriptor>
          <jndi-name>SEJBn</jndi-name>
          </weblogic-enterprise-bean>
          Further, in ejb-jar.xml I have set up the <trans-attribute> as RequiresNew for
          Session Bean while Supports
          for the EEJB. Something like this:...
          <container-transaction>
          <method>
          <ejb-name>SEJB</ejb-name>
          <method-intf>Remote</method-intf>
          <method-name>*</method-name>
          </method>
          <trans-attribute>RequiresNew</trans-attribute>
          </container-transaction>
          In spite of this setting, when, through the client, I am selecting the two records
          REC1 and REC2 at the same
          time and deleting them, REC1 gets deleted while REC2 does not and gives a TransactionRollbackException.
          Ideally, since both are part of a single transaction, both should have been rolled
          back.
          Please suggest if I am missing on some kind of configuration parameter or setting.
          I'll be more than
          happy to provide some more details to get the problem solved.
          I can also be reached at [email protected]
          Thanks in advance,
          Regards,
          Rishi


TCode: SWF5
Enterprise_Extensions:
-> EA-FS
Enterprise_Business_Functions:
-> FIN_TRM*
Rg
Lorenz

Empties management: The configuration for Empties Management

The configuration for Empties Management path
IMG -> S&D -> Sales -> Emties Management not appearing in ECC 6.0.

HI,
http://help.sap.com/saphelp_rc10/helpdata/en/43/010e22ab24235de10000000a1553f7/content.htm
http://help.sap.com/saphelp_bev461/helpdata/en/bd/958a3938822a4de10000000a11402f/frameset.htm
KAPIL

Bare minimum configuration for warehouse management

Hello,
For one of our Projects, there is a requirement of Warehouse Management merely just to enable the tracking of Material received to the Storage Bin level, as they manage the Inventory in Storage Bins in the existing Warehouses.
Other no major requirement is expected from WM like, automation of Putaway, etc.
Few of the Inventory scenarios are like Goods receipt, Goods Issue, Warehouse to Warehouse transfer, Bin to Bin transfer, Physical Inventory, Subcontracting for repairs, Vendor Consignment, also they will handle Project Special stock.
Now the configurations for Inventory Management are enabled for all the above processes. I now need to know, what are the bare mimimum configurations required so as to enable the WM related process, following each of the IM processes, like Putaway after Goods Receipt, Stock removal before Goods Issue, etc.
The Configuration for the Enterprise Structure to support Warehouse Management have been completed by creating the Warehouses & assigning the Storage locations to these Warehouses.
A detailed step by step process would be very helpful for me at this stage.
And i surely will assign points for all the useful answers.
Regards,
Zafar.

Hi,
If you want to define new storage types other than the standard ones, please define them. Otherwise, you can assign
the existing storage types to the newly defined warehouse.
Also you have to define storage bin types and storage bin structures.
All this you can find under the IMG path:
SPRO->Logistics Execution->Warehouse Management->Master Data.
Regards,
Pavani.

FICO configuration for warehouse management

Hai ...
My company planning to use warehouse management.
Anyone can help me, what will be needed as the FICO configurations regarding warehouse management.
Please inform me where can I get the articles or any documents.
or just email me at [email protected]
Thanks,
Melissa

hi
see the below link for compleate config sof warehouse management
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf
nagesh

Configuration for treasury management

HI,
can anybody tell me the configuration steps and relating steps for treasury management.

Hi Anitha
Treasury management is a vast field. You need to be very specific to the area
Treasury Management basically deals with
Money market Instruments
Securities
Hedging
Derivatives.
Each of these categories is dealt with in a separate manner. Then we have Analysers. So all these add up to various flavours in Treasury Management.
Regards
Virendra Malik

FPN configured for message server port

Hello,
I would like to configure my Consumer Portal to connect to my Producer on port :8101 (the default message server port of the Producer). However, each time I try with this conifguration FPN breaks and nothing works - can't browse the PCD or see remote roles via Identity Management (when I switch the config back to point to port :50000 in the Producer object on the Consumer it works fine again). I'm not using a SAP web dispatcher between the two portals but Producer portal is indeed listening on port :8101 since I can hit it directly. Is this a limitation of FPN?
My http trace shows an ABORT message when trying to connect with the :8101 configuration.
The 8101 port is necessary to be configured in order to leverage our clustered load balanced environment which has the 8101 message server port listening and redirecting to a cluster of servers.
Patrick

When using Remote Delta Links one can configure the SAP Message Server's RMI-P4 port (3901 by default) for RMI-P4 communication.
For the HTTP load balancing you cannot configure it to point to the HTTP port of SAP Message Server (8101 by default) only the application server's HTTP port on the Central Instance (e.g. 50000) can be used.
But don't bother yourselves with this, because SAP recommends using SAP Webdispatcher for HTTP load balancing in FPN scenario, so don't use SAP Message Server directly for HTTP load balancing in the FPN connection setup!

Service desk configuration for solution manager

hi this ,
sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution manager , and also iam able to see all messages are send by business partners using DSWP transaction, but how to see reply from solution manager sytem to satellite system ( message inbox of satellite system)
can any body tell the configuration of satellite system to see reply message from solution manager ?
thanks and regards
sudheerkoppala@ g ma il .com

>
sudheer koppala wrote:
> sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution manager , and also iam able to see all messages are send by business partners using DSWP transaction, but how to see reply from solution manager sytem to satellite system ( message inbox of satellite system)
> can any body tell the configuration of satellite system to see reply message from solution manager ?
There is no "message inbox" in satellite systems, but you can use the SAP Solution Manager to have a central access to all reported messages.
Configure Work Center "Incident Management" in SAP Solution Manager and grant access for message reporters.
See answers to similar question in accessing the service desk message from satellite system
Best regards,
Ruediger

How do I get my outgoing email configurations for Profile Manager to work properly?

Hey there,
The outgoing mailservers for users with a custom domain Outlook.com system keep getting @imap-mailoutlook.com appended to their outgoing mailserver, this stops the outgoing emails from working properly.
These are the email configuration settings for one of these accounts:
Thanks so much in advance,
Hamual

The problem fixed itself when I uninstalled ZumoDrive free cloud storage and also Growl the notifier application. Had to employ AppZapper to uninstall all related files.... but all worked a treat. All is back to normal.

Full Duplex Collisions???

OK Im really confused. I thought you couldnt have collisions with a full duplex port but yet my switches are showing collisions even though they are set to full. Also I was told that some applications will not run right if the network cards are set to full duplex. Has anyone ever run into this?

William
Part of the definition of full duplex is that the collision detection mechanism is disabled on a full duplex port/interface. So I believe it is impossible to have collisions on a port that is configured as full duplex - other than the possible result of some bug in the code.
Is it possible that the interface counters recorded collisions at some point in the past when the port was half duplex?
I have not run into any situation where an application would not run on a port set to full duplex. And I wonder how the application would know. One of the advantages of the layered model is that the upper layers are insulated from dependencies on what happens at lower layers. How would an application know whether the port was half duplex or full duplex?
HTH
Rick

Sound problems, full-duplex not working?

Hi,
Im having a problem with sound, i use ALSA, and when i play a mp3 in XMMS i cant hear the sounds from other apps (as Gaim) until the song finishes and im presented with all of them at once, this means that i get the usual message recieved sound one after the other, until all the messages sent during the song are "heard". and the next song starts.
I think has something to do with full-duplex, but dont know where to look or fix it.
any help?

It doesn't have to do with full-duplex. Full-duplex is being able to play sound out of your sound card and record sound at the same time.
What you want is to be able to play more than one sound at once. Only certain cards and certain drivers support this (one is the emu10k1, the sblive), most don't. If you want to play multiple sounds at once maybe you should install a sound daemon like esd or artsd.

Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

Configuration of Issue Management tables

Hello -
I am looking to configure the tables in Issue Management but I cannot seem to find them via the SPRO transaction.
Is there a guide on how to do the configuration for Issue Management?
Please let me know
Thanks!
Nadine

Please look at Note 1019583. In TA SOLMAN_ISSUE_MGMT there are also the usual Wed Dynpro ALV customizing possibilities (independent of Issue Management).

Forced Full Duplex changes to Half Duplex (no mismatch errors)

Guys,
I am going through a very weird situation and wondered if any of you had any ideas on how I could troubleshoot this issue.
I am running a 2960 Cisco, which has a single mode fiber cable which is connected to multiple rstp switches designed by a mining technology company.
The fiber port which connects these switches has "duplex full" written into its configuration. However, after a random amount of time, anywhere from 1 hour to 24 hours, the port is changes to operate in half duplex. This is found by doing a show interfaces status.
At no time whatsoever is there any duplex mismatch errors.
Once i notice that the port is actually operating in half duplex mode, i log into the port, do a "duplex half" then "duplex full".. the port goes back into full duplex for another 1-24 hour period.
Any ideas on why this port keeps jumping into half duplex operation?   I really need this port to run in full duplex and cannot understand why the port would go into half duplex operation when the end devices should support full duplex.
Again, i never get any duplex mismatch errors.
I appreciate any troubleshooting tips you can provide.

MSTswitchOVCC#sh version
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(53)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 21-Apr-10 06:08 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01B00000
ROM: Bootstrap program is Alpha board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE, RELEASE SOFTWARE (fc3)
MSTswitchOVCC uptime is 1 week, 6 days, 37 minutes
System returned to ROM by power-on
System image file is "flash:/c2960s-universalk9-mz.122-53.SE2/c2960s-universalk9-mz.122-53.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C2960S-24TS-L (PowerPC) processor (revision B0) with 131072K bytes of memory.
Processor board ID FOC1435W6KX
Last reset from power-on
4 Virtual Ethernet interfaces
1 FastEthernet interface
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : AC:A0:16:F3:EF:00
Motherboard assembly number     : 73-11910-06
Power supply part number        : 341-0328-01
Motherboard serial number       : FOC14354WTE
Power supply serial number      : LIT142210AX
Model revision number           : B0
Motherboard revision number     : A0
Model number                    : WS-C2960S-24TS-L
Daughterboard assembly number   : 73-11933-04
Daughterboard serial number     : FOC1435437G
System serial number            : FOC1435W6KX
Top Assembly Part Number        : 800-30954-02
Top Assembly Revision Number    : A0
Version ID                      : V02
CLEI Code Number                : COMGG00ARB
Daughterboard revision number   : A0
Hardware Board Revision Number : 0x01
Switch Ports Model              SW Version            SW Image
*    1 28    WS-C2960S-24TS-L   12.2(53)SE2           C2960S-UNIVERSALK9-M
Configuration register is 0xF
MSTswitchOVCC#

How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
So I'm not really sure what your question is.

Half duplex or full duplex configuration for MDS9124 management port?

Similar Messages

Maybe you are looking for