Half-frame slide in slide shows - burning DVD

I created a slide show in Photoshop Elements 10. I then clicked on Output to begin the process of creating a DVD. When the slide show transferred to Premiere Elements 10, only the bottom half of each slide frame appeared and thus produced a slide show DVD with only the bottom half of the frame. I then tried to burn a new DVD from a slide show I had successfully burned on a previous occassion. Again clicking on Output and following the menu I again got the half-frame when I got to the DVD burning program in Premiere Elements 10. Can anyone give some assistance?

Here is that ANNOUNCEMENT:
ANNOUNCEMENT: Windows Update Causes Display to Be Blacked Out
MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
"MS bulliten MS13-057. Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
For us, it occurs when decoding WMV9 files. Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
You can uninstall these windows updates to resolve your problem."
There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
Adobe has reported that MS is getting close to a new Update, but no time of release yet.
Good luck,
Hunt

Similar Messages

How to burn decent resolution slide show onto DVD ?

First of all I'm a newbie to this (PS8 Elements and Premier). I have a slide show with music in "Slide Show Editor". When I view this slide show in 'Full Screen Preview" I see a decent resolution but when I burn the slide show onto a DVD the resolution sucks if it's shown in "Full Screen". ( the slide show looks decent if shown in a smaller screen). I took the pictures with a 7 mega pixel camera. Another thing that happens when viewing "Full Screen" in the burned DVD is the text (if it fills the whole screen) some text is hidden around the borders.I burn the DVD in the Premier program.

Thanks for your reply. I'll try what you typed but the
hard part will be figuring how .

Burning slide show on dvd to give to friends

how do i share a slide show or photo album with a group of friends we traveled with? i have no idea if they have apple computors or are techno friendly. i wanted to burn DVD's of my slide how to give away but i can't seem to accomplish that. what is the most effective way to "share" or give a slide show to someone else?

Make you Slideshow in iPhoto and then use the Share -> Send to iDVD command and the slideshow will be sent to iDVD so you can burn a DVD to give to friends.
Regards
TD

Burning slide show on DVD.

Have P E 5. Wish to create and display slide shows on HDTV. Have created a show, but just learned that my version cannot burn the show to DVD. Am I missing something? Are there other options? Does the latest version 10 have this feature?
Thanks in advance for your help!
Fred

No version of PSE has this function, since Adobe wants you to buy Premiere Elements.
If you have a dvd burner you must have some kind of software you can use for this, even if it's only windows movie maker. You may also have gotten something like Roxio. Check to see what you have on your computer already. Then just output your slideshow as a wmv file and use whatever it is to create the video disc.
However, note that PSE does not create HD output.

I want excellent quality slide shows to dvd

I have been using iPhoto 6 to make slide shows set to music and then send them to IDvd to burn. After this process is complete, I am disappointed with the quality of the finished product.
I am a pro photographer who shoots raw files with a Nikon D200. I edit in Lightroom (sorry, not Aperture) and convert to full size jpgs with Photoshop. These are very good files in terms of sharpness and color, etc. The jpgs range in size from 2.5MB to 5.8 MB. This is not garbage in, garbage out. I then import them into my iPhoto library and build a slide show. When finished with transitions, effects, whatever, I send my project to iDVD for the finishing touches. I have selected the best quality and fomat for 16x9 wide screen TV. The show comes out just as I designed it, music works without a hitch. To view the DVD on my cinema display or wide screen TV, etc. the sharpess and quality of the images in the show are disappointing. Looks OK (just OK) from afar, but it seems like the quality should be so much better. Granted, my standards are high and I want this to be a professional presentation. Are these the wrong products for the quality that I desire? Are My files too big? (I doubt it) How can my projects reflect the quality of the images that go into them? If these are not professional products, what products might do this better?

I've found that creating the slideshow directly in iDVD gives me the best quality image when played. However, if I play a 4:3 aspect DVD project on my widescreen it doesn't look as good. But when I create the project in the 16:9 widescreen mode, it displays quite well on the widescreen TV as it's masked properly. If I crop the photos to the 16:9 ration the widescreen display is very good. Since the standard DVD image is reduced to 640 x 480 at 72 dpi, there's not much you can do to get a lot better. If you use the Ken Burns effect in iPhoto then you do want to have the largest image size possible so the zoomed portion of the effect is not reduced. As I recall the widescreen image size is 855 480 or so.
The reason I like creating the slideshow in iDVD is that it really is a slideshow. You can move back and forth slide by slide with a click of the remote. With the movie type it's rewind or fast forward.

Burned dvd stops before last slide

I had about 125 photos in a slideshow I just burned on a DVD. It plays fine until photo 65 and then stops. My save show plays all the way through in IDVD but the burned dvd stops. Any ideas why or what I can do? It is not a rewritable DVD.

First:
http://docs.info.apple.com/article.html?artnum=302961
Second:
Create a disk image and see how that plays. Your burned DVD should function the same way. Might be media-related.
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility.
David Pogue also recommends Verbatim on page 356 of his latest book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."

Slides are Blurred when Burned

When I burned a slide show on IDVD from IPhoto the pictures on the disc were not as sharp as the
one I had burned. The came out some what blurred. What could of caused? When I show the slide
show on iPhoto the images are perfect.

Are these high res images by any chance? Sometimes lowering the resolution helps.
Also keep in mind that burned Dvd's are considered low res devices. Any footage that is ultimately compressed into mpeg 2 will sustain some quality loss.
I'd also recommend reading this link. It offers some good information:
http://discussions.apple.com/message.jspa?messageID=8483142#8483142
However, if that simply doesn't work for you then perhaps consider an alternate app for slideshow presentations. All 3 apps that follow specialize in quality slideshows:
http://www.boinx.com/fotomagico/overview/
http://boinx.com/photopresenter/overview/
http://www.lqgraphics.com/software/phototomovie.php
(And just in case anyone reading this post finds the above suggestion offensive in terms of offering 3rd party apps to deal with slideshows as opposed to iPhoto; then feel free to make your own constructive suggestion/s).
http://discussions.apple.com/thread.jspa?messageID=8606363&#8606363
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Customizing pan and zoom (Ken Burns) slide by slide -- help

Here's where I am:
I've imported a bunch of photos into iMovie and they are happily sitting in the Photos Pane.
Here's what I want to do:
Photo-by-photo I want to customize the Ken Burns effect to change the zoom and panning behavior.
Here's what I am doing:
I select the first photo and change the zoom and pan behavior to my liking...then go to the next photo and do the same, and so on and so on...
Here's what's happening:
With each subsequent photo, the previous pan and zoom settings are all changed to be identical to the changes I most recently made (i.e. all my previous changes are "deleted" and now all the photos have the exact same settings).
What am I doing wrong? Thanks a bunch!

Sorry to make this such a messy thread! (I couldnt' find any way to edit my previous post, so I am creating a new one summarizing where I am and the problems I am experiencing). I'm about ready to throw my Mac through the
window...heeeeeeelllpppppp meee.....sssoomebodyyyyy!
So, trying to summarize my issues:
I'm having a rash of problems using iMovie.
Here is what I am trying to do:
Using photos from iPhoto Albums, I wish to create a movie/slideshow with pan/zoom, transitions, and music ultimately for import into iDVD for burning on DVDs to be views on televisions and/or computers.
Here's what I am doing:
1. In the Photo Pan I have the photos I wish to use from an album.
2. I select one photo at a time, adjusting the pan/zoom behavior and duration one at a time (I realize you dont have to do each separately, but I like to customize this behavior slide-by-slide).
3. Click on Update after each, thereby landing it in the timeline.
4. I then selected ALL in the timeline and chose a transition (cross fade) to be applied to all.
5. Now I've gone back to change the pan/zoom and the length on selected slides.
6. [This part's a little hard to describe since I think more than one thing is going on at once...] When I change the length of a slide, it recompiles the transitions on either side of it (which I understand) and when it's done, the slide durations of the slides on either side of it have been markedly shortened (like from 4 seconds down to less than 1 second). I'll then get an error message saying the transiton cant be applied to very short clips (which I understand)...
7. So, I'll then go to one of the recently-shortened clips to lengthen it's duration...and then the process starts over again, with the clip before it getting really short.
8. The same thing seems to happen if I delete the cross-fade transition and insert a different one...slide durations keeps changing radically.
In addition to solving the problem above, here's a couple more questions I have:
1. What part of the process do you set the length of the clips? (I was thining of 4 seconds a piece, but that wasn't long enough to accomodate the 1 second cross fade)
2. What order should I apply the various settings? (pan/zoom, duration, transitions...)
3. Later, assuming everything is okay with the timing and transitions and KB, if i want to change one transition between two photos, I tried deleting the cross-fade, then adding a new transtion. But in the process of the timing of the two photos changed preventing the new transition from fitting...). How do I go about this?
Clearly, I'm missing something here. This is so unintuitave...driving me nuts.
Thanks a ton for any help you can provide.

Premiere Elements 8: Scene Markers Not Frame Accurate on Burned DVDs

I have Premiere Elements 8, and I have just begun to burn DVDs of projects. I have discovered that the Scene Markers I have carefully placed at precise points in my footage (such as the very first frame of a scene) are not placed at those specific points in a burned DVD of the footage. They are out by several frames either early or late, the deviation being fairly inconsistent.
I placed 8 Scene Markers in the timeline of the project I have just completed, and were transferred to DVD with these Scene Markers at the following points on the resulting disc:
Scene Marker 1 was 7 frames early
Scene Marker 2 was 3 frames late
Scene Marker 3 was 2 frames late
Scene Marker 4 was 5 frames late
Scene Marker 5 was 5 frames late
Scene Marker 6 was 5 frames late
Scene Marker 7 was 7 frames late
Scene Marker 8 was 2 frames early
I was not expecting any deviation at all. There is no frame deviation when editing footage and transferring to DVD, it is absolutley frame-accurate, so why is there any deviation on the resulting DVD when it comes to the placement of Scene Markers?

If I am using GOP material, knowing that that material's I-Frames might not be 100% accurate with my desires, is to always have a Dip-to-Black Transition to about 02 sec. of Black Video, between all of my Clips. Then, I can locate my Chapter Markers on that Black Video. This also gets me that Dip-to-Black (and back from black), between Chapters. I like the aesthetics of those, and the solve any GOP issue.
Those Dip-to-Black also cover any "black flashes," that one often sees, when the DVD player's head seeks the next Chapter. The black flash will come when the screen is already black, so no one will ever see them.
I use a Dip-to-Black in editing, to show the passage of time, and perhaps the change in location (or both), and as Chapters usually feature one of those, the Dip-to-Black is ideal. Within a Chapter, if I use a Dip-to-Black (passage of time, or change in location), and the passage of time is quite long, then I will increase the Duration of the Black Video between the Clips even more. Just one way that I employ Transitions, and especially Dip-to-Black.
Good luck,
Hunt

Exported slideshow from Iphoto11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine but show stops 1/2way through because DVD has 2 chapters. How do I eliminate chapters?

I exported slideshow from Iphoto 11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine, but then when playing on DVD player show stops about 12 way and starts over. Seems there are 2 chapters in show. I wan t show to play straight through until end. How do I elimiante chapters or solve problem. Thanks. Bob Low

Try this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Play the disk image with DVD Player and see if you get the same start over half way thru.
Did you create the slideshow in iPhoto in the slideshow mode?
or were you in an album and then used the Share ➙ iDVD menu option? What I'm trying to find out is if the slideshow in iDVD is a movie file or an iDVD slideshow with the photos from iPhoto? If it's the latter how many photos in the slideshow?
OT

Extra frames appear in burned DVD

Can anyone tell me why my burned DVD, (that runs smoothly in FinalCutExpress, and in Preview mode in iDVD) has very quick EXTRA frames?? It is highly annoying, and very frustrating!!! The frames are definately NOT there in the FinalCut timeline, or iDVD preview, so where are they coming from?
Thanks!!!

You're right. It's not very well explained by the Help Menu IMO. Could use some refining. But I didn't write this thing so I can't really explain in detail. But I can show you an image of what I am referring to:
click here
Doesn't sound like your own iDvd project has a movie or slideshow in the first box. But if there were, you simply select it (one click) and hit the delete key.
Suggestion-Go ahead and add it anyway to the first box there and then delete it like I said above. Sometimes iDvd needs a bit of a jolt to get working properly. That or dispose of the plist for iDvd from your Home folder (the one that looks like a house) > Libaray > Preferences > com.apple.iDvd.plist
Make sure to quit iDvd before disposing of this preference file by a simple drag and drop to the trash followed by a complete restart of your mac. Won't harm your mac nor your existing project. But you may need to address iDvd's preferences again / things like the apple logo on the menu (if you want it there or not). I always keep it deselected. Your choice.
Hope this helps.
Message was edited by: SDMacuser

Burned DVD gets green on the lower half

I have a problem with burning DVD.
Once I simulate the project on DVD Studio Pro,the lower half gets green.
Then I can not burn a DVD(shows "untitled DVD") or the burned DVD also gets same problem.
My project work fine on final cut pro.
how can I solve this problem?

i copied the dvd
How did you 'copy' the DVD? iDVD isn't for copying DVDs - Disk Utility is for copying DVDs.
Unfortunately, Disk Utility doesn't seem to like to copy DVD+R discs. Toast is your best bet.
F Shippey

About a month ago a song randomly appeared in my songs list and when I tried swiping to the left to delete the song it wouldn't slide over to show the delete button. The delete slide appears with all of my other songs except that one. P.S. iCloud is off.

About a month ago a song randomly appeared in my songs list and when I tried swiping to the left to delete the song it wouldn't slide over to show the delete button. The delete slide appears with all of my other songs except that one. The ICloud songs are turned off and it wasn't iTunes Radio. 2 more songs like this have appeared and I can't delete them from both my iPhone or my computer (they don't even show up on my computer). If somebody knows how to fix this that would be amazing! Thank You.

Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

Hi Sara!
Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
Thanks for your quick answer.
Best Regards
Per-Olof Egli Logga Egli C.I.S
Managing Director
Egli C.I.S. Consulting
Lapphundsgränd 43
SE-128 62 SKÖNDAL
Sweden/Швеция
Phone: +46 708 23 03 53
<http://www.eglicisconsulting.se/> www.eglicisconsulting.se
<mailto:[email protected]> [email protected]
Skype: eglipo
Från: Sara.Forsberg
Skickat: den 10 september 2014 22:11
Till: P-o Egli
Ämne: How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg> n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

AS3.0 Slider to slide timeline is duplicating first frame. Why?

I have made a slider that I am having issues with. This slider is to control the timeline of a movie clip when dragged. My problem with this is that It seems to be duplicating the first frame. When I slide the slider to the right it will hit first tick and still display what is in frame 1 .. then on the next ticks it will continue with the rest of the timeline. Any Ideas how to prevent / over come my slider from doing this with the first frame? I have dificulty explaining so I have atached an example.
Thanks In advance.

I have tried to upload the .fla but server wont let me.
here is the code I am using for the slider. It controls numbers_mc that contains frames 1-16 all numbered 1-16 These numbers will be replaced later with images. Thanks
s.setSize(240,1);
s.maximum=numbers_mc.totalFrames;
s.liveDragging=true;
s.addEventListener(Event.CHANGE,updatemc);
function updatemc(e:Event)
numbers_mc.gotoAndStop(s.value);

Half-frame slide in slide shows - burning DVD

Similar Messages

Maybe you are looking for