Half of clients report: MP has rejected registration request due to failure in client certificate

My entire site is configured to use HTTPS, about half my clients have installed and continue to communicate with the MP successfully whereas the other half are reporting the following error during installation:
MP has rejected registration request due to failure in client certificate (Subject Name: COMPUTER.DOMAIN.COM) chain validation. If this is a valid client, Configuration Manager Administrator needs to place the Root Certification Authority and Intermediate
Certificate Authorities in the MPÆs Certificate store or configure Trusted Root Certification Authorities in primary site settings. The operating system reported error 2148204809: A certificate chain processed, but terminated in a root certificate which is
not trusted by the trust provider.
The thing is, ALL clients have the same Root Certification Authority and Intermediate Certificate Authorities, any thoughts?

Hi,
Is possible that half of your clients are enrroll in your PKI infrastruture with a root certificate old of you Certificate authority and you only have one certifiacate register un the SCCM, you can't have 2 root certificate with the same subject but you
can re-enrroll all your client machine if have auto-enrroll configured by GPO's.
I will Attach 2 snapshot's that can help to identify if you root ca certificate in SCCM are correct and are the same that the certificate root authority in you client certificate, if you like re-enrroll all your machine to ensure that all clients machine
have the same root ca you can see how in this link
http://windowsitpro.com/security/q-there-easy-way-automatically-re-enroll-certificate-holders-received-certificate-old-ca-ne
Client Side

Similar Messages

Client Install Fails: Log: ClientIdManagerStartup - Server rejected registration request: 3

Trying to install the client onto Windows Server 2008 R2 Servers using ConfigMgr 2012R2. no PKI is being used. We do not see this issue on any workstations, only servers.
It returns the following:
Got registration response from MP. Client approval status: -1
[RegTask] - Server rejected registration request: 3 ClientIDManagerStartup
Actions taken based on other Articles:
1.Delete the c:\windows\smscfg.ini file
2) Run CCMDELCERT on the client
3) Restart the SMS agent Host service.
Result: FAILED, it comes back with the same errors.
MP_RegistrationManager.log shows:
MP Reg: Client in-band certificate is not valid due to failures in certificate chain validation, Raising status event. Failure HR = 0x800b010a, In-band Cert SubjectName = Servername - SERVER
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of MpEvent_CertInvalidChain
ClientID = "GUID:D32A0A76-E832-49B6-A431-084DB435FD83";
DateTime = "20140520175614.768000+000";
MachineName = "Servername.tes.name.com";
ProcessID = 3444;
SiteCode = "XYZ";
SubjectName = "Servername - SERVER";
ThreadID = 17368;
Win32ErrorCode = 2148204810;
MP Reg: Registration request body is invalid.
Any other ideas out there???
David Baur

Do the following to check the SMS self-signed certificates
Start MMC.exe
Add/Remove Snapin -> Select Certificates -> Select local computer
Locate the SMS folder
Find the SMS Signing certificate and SMS Encryption Cerrtificate - check if they have expired. If they have expired - delete them.
Retry client installation

I am trying to get Photoshop CC subscription but the system rejects my request due to my country (Panama), what should I do to get the membership?

I am trying to get Photoshop CC subscription but the system rejects my request due to my country (Panama), what should I do to get the membership?

generally you need 1.90gb
what you can do is back up your phone to your computer before doing the update, just as a precaution.

Problem with one computer: [RegTask] - Server rejected registration request: 3

Hi!
I having some problem with One of our clients, its mine :)
It does not register with the site
ClientIDManagerStartup.log:
MP_RegistrationManager.log
I have no idea why! I don't even use https and PKI. I have done a reinstalled the client by removing "C:\windows\SMSCFG.ini" and the SMS certificates before install but it still won't register. CCMSetup logs return successfull. Boundaries is setup
correctly.
I have also tried to uninstall ccmagent and readded the computer object in SCCM and installed it through client push but still the same problem.
I really don't want to reinstall the whole computer as I have already installed lots of applications i don't know if that will work anyway, could try to run a sysprep maybe.
Any ideas?
Thanks!

if that is the error you need to look at your IIS & Webdav & SQL Configurations... you can take some help from below blogs to troubleshoot this
http://anoopmannur.wordpress.com/2011/04/20/configmgr-sccm-2007-mpcontrol-log-shows-httpsendrequestsync-fails-with-status-code-500-internal-server-error/
http://www.windows-noob.com/forums/index.php?/topic/651-sccm-mp-issues/
http://windows7sux.blogspot.com/2009/04/sccm-smp-500-error.html
http://brothertu.blogspot.com/2010/07/how-to-quickly-test-to-see-if-sccm-mp.html
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/89c84077-f47c-427b-b73e-39478f34ebaf/
Thanks, Prabha G

'ttaexecpe_pid:9730_75' has rejected" Error while launching ssh from webtop

Hi All,
I receive the below error message when I launch the SSH application from the webtop.But other application like RDP works fine. We use SGD v4.31 and tectia for SSH.
Can anybody please advice ASAP , what need to be done ?
2008/09/17 14:24:43.546 (pid 19623) pem/launch #242
Sun Secure Global Desktop Software(4.31) ERROR:
Protocol engine 'ttaexecpe_pid:9730_75' has rejected the request, error: ErrInvalid
The current launch has failed.
If the problem persists, restart the server.
Thanks and Regards,
Sudhakar

That too bothers me, however it's certainly not random when ssh publickey auth works. Something, somewhere, is blocking authentication. When it works is before that process has a chance to intercept ... the authentication mechanisms of sshd? I don't know.
Booting in safe mode results in the same.
I've rarely used the "format and reinstall" approach to fixing problems. I'd like to think myself fairly adept at diagnosing, researching and repairing complex issues, but I think this might be the time that a format and reinstallation might be the most logical choice.

Xml report output not producing for Request sets.

Hi,
I build a xml report which has basically a request set of 2 programs
1. the first program populates some staging table - pl/sql based program
2. the second program is an xml report that reports off the staging table
What is happening is that the second program loses the layout once submitted via request set. If you run them one by one it works fine but if you run them as a set and even enter the layout definition, it still doesn’t work and no output is produced.
Any ideas?
Please help!
Thanks,
Naresh

Hi Naresh
I think you may be better off amending your process slightly - rather than using a request set, submit the second request from the first. This way you will be able to use the fnd_request.add_layout function which sets up the layout template for the concurrent request. It's not perfect, but at least it works!

MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

Why Microsoft doesn't have correct fix to run automatically. How many years we need to cry with same error again n again?
Does any one have correct solution which will fix permanently while running more than 4000 systems in our environment
Manual stuff isn't easy. Pls provide permanent fix?
MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

This isn't a bug to fix. This is by design. Clients must be approved to be managed. Thus, only your configuration or expectations must be fixed. To correct your configuration, see the link Henrik posted. To correct your expectations, read the content linked
by Henrik.
Jason | http://blog.configmgrftw.com

ICloud email generating error SMTP has rejected address

A very strange thing just started happening this weekend. I have been an iCloud user since it was .Mac and it's been my primary email client for years. I receive about one new email every five minutes. I can send and receive email from my MacBook Pro, my iphone, my iPad, and via icloud.com. I all these platforms constantly and I've had zero issues... until yesterday.
The main email address I use is technically an alias. It's a @me address, since that's the shortest to type. Yesterday a co-worker informed me she had gotten this error message when trying to send me email (yet I've been receiving daily emails from her for months):
Reason: Remote SMTP server has rejected address
Diagnostic code: smtp;550 5.1.1 unknown or illegal alias
Sure enough, I looked and realized I had not received any email all day, and I have still not received any today. Normally I receive several emails per hour. I checked my mail via icloud.com and there was nothing there either. I let it go for the rest of the day, figuring it was a server problem that Apple was working on.
This morning, however, the problem was continuing. So I tried generating a test message from icloud.com and sent it to my main alias (my primary email address, because it's easier to remember) and also to my main icloud email, which is also a @me address. The test email went through to my main icloud address with no problem but was rejected by the main alias with the same error message as above.
Next, I tried investigating my aliases. I have made no changes to any settings in quite some time, but this is what I found. When I checked my email aliases (I have 3 @me alliases beyond my main icloud id) on icloud.com, they had all vanished. Then I looked at the icloud advanced settings on my iphone. I saw that all the @me aliases remained, however my main @me alias was grayed out.
And that's where I'm at now. I thought for sure this was an Apple server problem, but I haven't seen any other messages reporting the problem, so I'm not sure how to proceed.
Thanks in advance for anyone's help!

Hi Fly Line,
My world has gone eerily quiet too.
I am in exactly the same situation but mine is an old @mac address
So like you, the main email address I use is an @mac.com alias. I get lots of emails every day for work. They all stopped coming to this alias yesterday (June 6th)
Mail was behaving oddly, but I was too busy to work out what was happening.
I've just discovered that all my original @mac alliases have disappeared from Mail on my iMac and also have disappeared when I log into iCloud via Safari
The aliases are showing up on my iPhone, but as you have said, the primary email address (mine is an @mac adddress) is greyed out. I'm not sure if that's just because it's the primary address.
The aliases ARE showing up on my Macbook Pro.
I tried sending an email from both the iMac and the Macbook. Both returned the message "The server response was: unknown or illegal alias: alias"
I havent changed any settings either. I can't help you as I am at a complete loss. I may try calling Apple on Monday. I'll let you know if I come up with anything. It would be great to hear from you if you have found a solution

Client Certificate Rejected, repeatedly +with great vigor

Hi all --
Perhaps you can give me a hand. I recently got a new Macbook Pro -- my first new CPU since the ole' clamshell back in 2001. Very happy with it as a whole but also finding that I am a bit behind the times in terms of my understanding of the software. Here is the problem: Yesterday I tried to access a page using Safari (2.0.3) from my history. I do not believe that it was a secure page as it was part of the dartmouth.edu website but it may have been. Anyway, a dialouge box popped up asking for my to use FileVaultMaster keychain. I did not know that I had such a thing but I typed in my master password. The page still did not open, but Safari displayed a text box saying that there was an error -- this particular error, in fact:
<begin quote>
The error was: “client certificate rejected” (NSURLErrorDomain:-1205) Please choose Report Bug to Apple from the Safari menu, note the error number, and describe what you did before you saw this message
<end of quote>
Now, when I try to access the basic Dartmouth homepage of http://www.dartmouth.edu, Safari converts it automatically to https://www.dartmouth.edu and asks for the keychain and then displays the error. I tried emptying the cache and resetting Safari (and even restarting the computer, although I understand that that is no longer necessairy with OS X) but to no avail. Can anyone clue me as to what is happening, and why?
Thanks much in advance,
-Sparco03
MacBook Pro Mac OS X (10.4.5)

I emailed [email protected] about this problem and here is the response. The solution of getting a valid Dartmouth certificate doesn't apply to non Dartmouth users, so I'm not sure what to do in that case.
"You need to check your Keychain. The reason you are getting that error is because Safari is sending a Client Certificate back to the web server (which asked for it), but the web server can't verify that it's a good certificate. This usually happens when you have an expired certificate, or you have a non-Dartmouth certificate that Safari is likely sending because it can't find a Dartmouth one."
"Whichever of these is the case, the solution is to get a valid Dartmouth certificate, which you can generate by going to https://collegeca.dartmouth.edu/ and following the directions on the web page. If you have an expired Dartmouth cert, you will need to delete that before you import your new, valid certificate."
"The reason all of this is happening is specific to Intel Macs. The mechanism that Dartmouth has used, better than 7+ years, to authenticate browser users to web site (Kerberos) uses the SideCar helper application. This application doesn't run on Intel Macs, and it most likely never will. Fortunately, Dartmouth installed client certificates as an additional/alternate solution for web site authentication a few years ago. Since client certs work great on Intel Macs, we had to force Intel Macs to always use HTTPS when connecting to any site on www.dartmouth.edu. That way we can always be able to ask for your client cert, so that we don't break your ability to access protected sites that live on the www.dartmouth.edu server."

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Rejected client certificate by the server

Hello everyone.
I writting you because a I have a big problem using ssl and client authenticate.
I created a connector for the client connetions:
<Connector port="9443"
     maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
     keystoreFile="C:/WINDOWS/security/server.ks"
     keystorePass="*********"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" debug="0" scheme="https" secure="true"
clientAuth="true" sslProtocol="SSL" />
As it is for educational propurses, I created my own self-signed CA using openssl and generate a certificate request for the
web server and then I signed with the self-signed CA.
Then I created a client certificate and I signed with the self-signed CA, I import the self-signed CA in firefox as a
certificate authority and the client certificate as a client certificate, but when I try to establish a connection I got this
error message: "Could not establish an encrypted connection because your certificate was rejected by agatha. Error Code -12271"
(agatha is the apache server).
I got a openssl manual and I saw I followed the right steps to create the CA and the client certificate, I also read that the
common name of the client must match an entry in tomcat-users.xml, I created an entry with this common name and
the error message still apears.
When I use Internet Explorer I get a error page with this title: The page cannot be displayed
I opened the stdout.log file and there is a exception repeted 5 times:
NotifyUtil::java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     at org.netbeans.modules.web.monitor.server.NotifyUtil$RecordSender.run(NotifyUtil.java:237)
What is happening??? is there something wrong??

That didn't work for me - as well as a host of other things that did not work for me. I can honestly say that Netbeans is the worst piece of junk software I've ever used in the entirety of my life and my previous one thousand lives.
The best way to rid yourself of this problem is to uninstall Netcrap and run over to Eclipse. But beyond that, edit your [$TOMCAT_HOME]/conf/web.xml file and rip out the following section from the top - where Netcrap snuck it in, and didn't remove - even causing config errors after I turned it off.
=========================================
<filter>
<filter-name>HTTPMonitorFilter</filter-name>
<filter-class>org.netbeans.modules.web.monitor.server.MonitorFilter</filter-class>
<init-param>
<param-name>netbeans.monitor.ide</param-name>
<param-value>127.0.0.1:8082</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>HTTPMonitorFilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
=========================================
I'm using 4.0 on Linux. Thing has got a couple of cool features, but nothing beats dependability, and a darn config interface that actually makes sense. I mean, turn off some features and you can't even open your past projects?! WTF?! But no indication! But first the icon looks good! And then you click on it and it disappears! Un-effing-believable! And it took me hours to figure out how to set up a dang server! I just assumed it didn't have the ability to do it at all! The source-code control config is whack. Man. Total lack of useful documentation, no decent news/web boards. Totally outrageous.
Worst. Software. Ever.

Client-Auth reports: HTTP4030: Timeout while waiting for client certificate

Hello,
I'm having problems with the certificate authentication in my Sun Java System Web Server Enterprise Edition 6.1: I have created an ACL in the SJWS that asks for a client certificate when the user goes to a specific URI:
acl "uri=/server1/myaction.do";
authenticate (user) {
method="ssl";
deny (all)
user = "admin";
It works great and, when the user goes to "/server1/myaction.do" (we are using Internet Explorer 7 as Web browser), the window for selecting the client certificate appears:
- If the user selects a certificate that doesn't require password, everything works fine.
- The problem comes when the certificate is configured in Internet Explorer for asking for a password every time it is accessed. Once the user has selected the password protected certificate, the window for typing the password appears, but if the user doesn't type it and click OK IN LESS THAN 5 SECONDS (I've timed it), the following messages appear in the SJWS logs:
[28/Nov/2007:09:25:05] failure ( 2055): for host 10.0.145.11 trying to GET /server1/myaction.do, Client-Auth reports: HTTP4030: Timeout while waiting for client certificate.
[28/Nov/2007:09:25:05] security ( 2055): HTTP4290: get_auth_user_ssl: client passed no certificate.
I tried to add the following two lines to the magnus.conf file of the SJWS, but nothing changed:
SSLClientAuthTimeout 240
AcceptTimeout 3600
Has anyone experienced something similar? Any little piece of advice would be greatly appreciated.
Thank you very much in advance,
Carlos.

This is fixed in Web Server 7.0 update 2. Please migrate/upgrade to Web Server 7.0 update 2. Sorry for the inconvenience.

Printing report that has a parameter with multiple values crashes jvm

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

Need to print a report that has two pages but based on condition

Hi
Can someone help me. I have a report that has 2 pages and I need print it but not boths pages at the sametime.
I have code ( the conditions)like this
If (A=Y) then
print Page 2
else print page 1
end if;
Note: Where would I put the code. Please
Thank you

Some folks have written JavaScripts for such needs, but for only 6 pages I would simply do the following. 1. Crop all pages to show 1 and 4. Then print to a new PDF (not optimum, but will do the job). 2. Repeat for 2 and 5. 3. Repeat for 3 and 6. Now open one of them in Acrobat and the use insert pages to insert the other two files. Now rearrange the pages using the Pages display and save. That should do the job.

"error Report" "iTunes has encountered a problem and needs to close" HELP!!

every time i try to load itunes i get this message
"error Report" "iTunes has encountered a problem and needs to close". i have tried uninstalling and reinstalling. i tried removing quicktime through my control pannel and then reinstalling. ive tried running scans and pretty much anything else i can think of. at this point i might just return the ipod. anyone have any ideas.

Have you tried uninstalling Quicktime? If not try that. If you are still having problems then do this.
1. Uninstall both iTunes and Quicktime.
2. Delete the folders iTunes and Quicktime where installed in.
3. Reboot.
4. Delete C:\Documents and Settings\<<Your User ID>>\Application Data\Apple Computer\
5. Delete C:\Documents and Settings\<<Your User ID>>\Local Settings\Application Data\Apple Computer
6. Delete if in your My Documents folder there is a folder called My Music with a folder in it called iTunes. Delete or rename the iTunes folder.
7. Reboot.
8. Turn off all anti virus and firewall software.
9. Re-install iTuens.
If you still get an error after that your Windows install is hosed. You will need to format and re-install it first.

Half of clients report: MP has rejected registration request due to failure in client certificate

Similar Messages

Maybe you are looking for