Half of iTunes is off the screen

I can't seem to get the bottom right handle of the itunes screen in order to resize it.  it's off the screen.  my only option is to click the two arrows in the top right corner to make itunes full screen.
anyone have any idea how to resize if it's off the screen?

i just figured it out - nevermind!

Similar Messages

  • I did an upgrade on my iphone5 and now it's telling me to plug into a computer for iTunes, I don't have one so how do I get the USB plug in and iTunes symbol off the screen?

    I Just did an upgrade on my iphone 5. It's stuck with a USB plug in and the iTunes symbol on the screen. I don't have a computer to plug it into what should I do?

    You find a computer with iTunes on it, plug your phone in and restore it. it's in recovery mode. you don't have a choice.

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • I am new to iphones and went to Itunes and it said my new iphone needed a software update. Now the apps that I put on wont work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

    I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

    Memory Map:  http://www.memory-map.co.uk/iphone/
    0870:  http://www.simonmaddox.com/
    Viber:  http://support.viber.com/home
    VoucherCloud: http://questions.vouchercloud.com/

  • How do you get you iphone off the screen where it says itunes

    how do you get you iphone off the screen where it says itunes

    Connect the phone to your computer using the usb cable provided with the phone and start itunes on the computer. It sounds like you have a pre iOS5 phone and it needs to be activated using itunes on your computer.

  • I tried to restore my iPod Touch 2nd generation and now it won't sync to itunes.  on the screen it shows the usb end of the cord and the iTunes logo over it.  Is it broken?

    I tried to restore my ipod touch 2nd generation  and now it won't sync to itunes.    On the screen is the USB end of the cord and the iTunes logo over it.
    I have turned it off and on,  held the off button down and  the select button down but it still comes up with that picture on the screen.    Have I broken it?
    Please help.
    Mimi

    It means the device is in recovery mode.  You'll need to reconnect it to iTunes and restore it again.
    You may need to connect it in recovery mode manually using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • Scroll bar on the right is off the screen. How is this fixed?

    In the 11.0.1 version of iTunes, when I go to full screen, the window is too big and the scroll bar on the right is off the screen. Can this be fixed, or do I have to wait for the next version?

    Yep. For all us spreadsheet geeks, this is a real sinker. Anyway, here's my workaround. Not free, unfortunately. I have a macro program called QuicKeys installed on my Mac that I've used for countless years, and  which I highly recommend for other reasons. Anyway, one of QuicKeys' many features is simulating a scroll wheel using the keyboard. I have it simulating a cell-by-cell scroll using cmd-arrow keys. The only drawback is that I have to release the cmd key each time I want to move another cell.

  • Special effect-making a photo split and drift off the screen

    I would like to cut a photo with a jagged edge and make the two resulting parts glide off the screen in different directions. Can anyone suggest a plug-in or program with which I could do this?
    Thanks.
    Mary

    Hi Mary,
    as an Expert For The Arcane.... forget digital, do "ToolTime"
    basic: film "tricks" the eye... it is just 25/30 stills in a sequence...
    (you hadn't told us, wether "the couple" is a moving image or a still? anyhow, I start with a moving image:)
    make still of "last" frame (the point in time, where the toring apart happens...)
    make a print of that (laser would be nice, a color jet printer is nicer
    tear that print out in two pieces
    now, the tricky part:
    place you camcorder over a table, set light....
    place both pieces underneath camera
    record, how you push both parts in different corners..
    (do some versions...)
    don't record on tape, import DIRECTLY into iM!
    the tricky part is, to place the camera in a way, that the pieces allmost stay in the same place as the last frame of moving image! (switch in iM between "import" and playback)
    back to iM:
    edit 1 - 2frames off of the very beginning the sequence
    fasten sequence (rabbit)
    add to last frame of moving sequence...
    I would add some "sepia" and "cinema" (=making pic looking old) effect
    this hard cut/jump cut (you cut off the beginning of the movement) from moving image to real picture will "surprise" the eye, the whole "moving pieces" sequence will be no longer then 10 - 15 frames... (you shouldn't do that slow-mo).....
    I've done that before...- ok, not really Hollywood, but as a single shot the effects surprises most watchers...
    you'll spend half a day for 15 frames... of glory ;-))))

  • TS3694 my new ipod just got stuck look like usb and the itune label on the screen

    my new ipod is stuck and it not connecting to pc and i just can't the screen look like the usb
    and itunes logos on the screen need help to repair

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it??

    Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!

    Then you will need to try restoring it once more:
    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • Downloaded iOS 7.0.2 and one of my apps (ultimate history quiz) changed size. It is so large I am not able to play the game because most of the print is off the screen on my iPad. Help!!!!

    Had an app (Ultimate History Quiz) that I played frequently. It came up on the screen in the smaller iPhone version. Then I downloaded iOS 7.0.2, and now the app is so big that the printing goes off the screen, making it impossible to play. I checked the app sore to buy another one, and it is no longer available on there.  WHAT CAN I DO TO RESTORE THE GAME TO ITS ORIGINAL SIZE???????

    Wait for apple to tweak things....or talk to the app developer. they haven't updated since the update and unless APple happens to fix whatever the issue is, then the burden is on history to make their app work with the iOS

  • My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

    My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
    My phone is completely disabled, what can i do ?

    Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Presentation starts 5" from the left side of screen and pushes intellegence off the screen to the right.

    The top of my screen is normal: the tool bar starts "File, Edit...
    The body of the screen while running Firefox-and during typing of this message- is full of lite. The actual data: starting from the top of this page- "Firefox Help... Ask a new..." etc. starts 5 1/4 inches from the left of the page.
    It's as if Firefox were presenting a wider page with the presentation moved to the right. This pushes the last, normal, 5" of the presentation off the screen.
    The rite end of the bar which starts out: http://www.mozilla.com/en-US/firefox/fx/
    is off the page, so the facilities at the rite end are lost.
    Any presentation, including Amazon.com and Youtube.com are similarly pushed off the rite side of the screen by 5".
    I have no access to the rite-most 5" of any internet presentation.
    The sliders that move the presentation up and down and left/ rite are off the screen.
    I have shrunk the display down so small, i can barely see the numbers: Control panel\ display \ settings \ 1920 by 1200. This gives the ILLUSION of centering the presentation, but still no sliders. At this setting, i can see the full width of Amazon. Youtube appears centered, with 4 1/4" on both left and rite, but no edge sliders.
    I dropped the 'setting' to 1440 x 900.
    Lost about 3" off the rite side of Amazon; barely on the rite edge of Youtube.
    None of my local programming has a problem: Excel, pictures, videos, Word, even Internet Explorer goes full page and centered.
    I un-installed Firefox and downloaded it fresh. It did NOT ask me to reboot my puter, so i didn't .
    I can supply pictures (screen shots) of the phenomenon on request.

    - Open Firefox -> got to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check if its working.

Maybe you are looking for

  • How to get one column value from a DOCUMENT TYPE attribute

    Hi, I have created a DOCUMENT TYPE attribute which queries from a table and all the column values( For Ex: Customer Name, Contact Name and Address) are displayed in the message body. I want one column value(For Ex: Customer Name) to be displayed in t

  • Adobe Bridge output module

    I am having an issue getting the adobe output module to work on my computer. I did exactly what the website said and its still not working.  Any advice?

  • Hyperlinks für Exceltabelle auf bestimmte Seiten eines PDF-Dokuments

    Guten Tag, wie kann ich Hyperlinks in einer Exceltabelle setzen, die nur auf bestimmte Seiten in einem PDF-Dokument verweisen? Es ist gewünscht, dass wenn man auf den Link geht, sich dann die richtige Seite in diesem einem PDF-Dokument öffnet und nic

  • Add AdHoc on Header Level SC within Status "In Revision" (BRF SRM 7.0)

    Hi all, we have implemented a n-step approval workflow within SRM 7.0 (BRF) If the SC is created, user can add AdHoc approvers on header level. Problem: If an approver rejects or changes the SC, SC is sent back to requisitioner and he has to accept t

  • Locking a calculated date field

    I have a date field on my form using the custom current date object included in Designer 8.2, which applies the following FormCalc script to the LayoutReady event of the field: // Current Date in short-style date format. $.rawValue = num2date(date(),