Half of my ard clients have gone rogue... (offline, sleeping, denied)

I have 18 iMacs on a Windows Active Directory network. At the end of the last school year I could control and manage all 17 (one new one this summer).
This year I can only control 8 of the 18. The other 10 say either: Offline, Sleeping, or Access Denied. For all 10 if I try to manage or observe any of them I simply get one of these messages: Connection Failed or Authentication failed.
What changed over the summer is this:
1. We added subnets to segregate printers, switches, computers, etc from all being on the same subnet. The iMacs are all on one subnet
2. We changed the iMacs from fixed IP addresses to DHCP. All of the computers have talked to the DHCP server and have valid IP addresses. They can also have their leases renewed without problem.
3. We added the 18th computer which is a new iMac with Snow Leopard. All of the other computers have Leopard
4. I have checked the security, network, and sharing settings for all 18 of the computers and they all match in the fields that I tried.
5. I should add that when I set up the first 17 machines I had the help of an outside consultant who showed me how to connect to the domain, etc. I am still a rank novice and need help figuring out why ten machines decided to go offline as far as ARD is concerned?

I'm having a similar issue here at my job. I have 2 computers running ARD on our network. One of them can see and control every computer on the network fine. The other computer can see every computer on the network but 1. There is a lone iMac that doesn't show up in that computer's list of clients. If I choose to scan using Bonjour it will see the missing iMac, but if I try to "Get Info" on it, the info is very limited. If I try to "Observe" it, it fails to verify. If I try to add the iMac by IP address it fails to verify. The only difference I can see is every other computer has a "-" in the DNS Name column but this one. This iMac has the full computer name "Accounting5.local" showing.
Any ideas for me to try to get this ARD to see/control this iMac correctly again? I'm stumped.
Thanks in advance for any help/suggestions.

Similar Messages

ARD client won't wake after sleep

I have a client on the network that won't wake. I have the "wake for ethernet access" checked and access set up correctly (seven other machines with same OS and ARD client version working fine). Running a MacPro with 10.5.8 with ARD Client version 3.3.1. Any suggestion as to what I'm missing? THANKS!!

Sorry for my delayed response...It's on the same subnet. There may be something plugged into one of his firewire ports. Could that be something?

HT203167 half of my song have gone off my iphone since i updated my itunes is there anyway i can get them bk on the phone ?

since i have updated my phone an the itunes on my laptop half of my songs have gone off the phone is there anyway of gettin them back thanks x

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.

I updated my 4s to os8. more than half my apps have gone. what now?

i updated my 4s to os8. more than half my apps have gone. what now?
backed up t my imac, told it to restore software, thought i would get my apps back. where are they? phone says facebook still there, but i don't know where as there is no icon! can't find the "search" command place either. i miss my instagram.

i downloaded the file iPhone4,1_7.1.2_11D257_Restore and saved it on desktop..then opened itunes. Pressed Shift button (using windows) and clicked update button, selected the file from desktop and updated.

My hyperlinks have gone awry

Help, my hyperlinks have done their own thing. I want all my hyperlinks to be blue as a:link. I defined my links in my external style sheet to be blue; however, when I visted my page in chrome or on my mobile phone some of my links are blue and the rest are purple. In chrome on the desktop, the "home" link in the navigation is blue and the rest of the links in the navigation are purple lol. This looks terrible to me and I'm sure others? How can I force each link to be blue, can I add a bit of code to the <a href ....> tad at every link to force each one blue? I have attached my source code and my external style sheet below. Please help me get this fixed. I've had this problem in previous designs as well. I know dreamweaver can be buggy but there is usually a way around using the code. Thanks to all who help:
Source code:
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>The Fat Loss Factor</title>
<link href="externalstyles.css" rel="stylesheet" type="text/css"><style type="text/css">
.sfadsf {font-family: 'Myriad Pro'}
.size {font-family: 'Myriad Pro'; font-size: 19px; }
.size {font-size: 19px}
#Table {
 margin-left: 0px;
 font-family: "Myriad Pro";
 font-size: 14px;
#PACKAGE {
 margin-left: 200px;
.boldbig {
 font-size: 18px;
 font-weight: bold;
a:link {
 color: #00F;
a:hover {
 color: #F00;
</style>
<script>var __adobewebfontsappname__="dreamweaver"</script><script src="http://use.edgefonts.net/permanent-marker:n4:default.js" type="text/javascript"></script>
</head>
<body>
<div class="nav">
<table width="100%" border="0">
 <tr>
 <th width="25%" scope="col"><a href="http://www.lean-abs.net/index.html">Home</a></th>
 <th width="25%" scope="col"><a href="http://www.lean-abs.net/terms.html">Terms</a></th>
 <th width="25%" scope="col"><a href="http://www.lean-abs.net/disclaimer.html">Disclaimer</a></th>
 <th width="25%" scope="col"><a href="http://www.lean-abs.net/privacy.html">Privacy</a></th>
 </tr>
</table>
</div>
<div class="header" id="header"><center><img src="header.jpg" width="1000" height="294" alt=""/></center></div>
<div class="body">
<h1 style="text-align: center"> </h1>
<h1 style="text-align: center">"Introducing <a href="http://dc06fet7mc2e2y31tboekenhis.hop.clickbank.net/">The Fat Loss Factor</a>, Your Detox and Solution to Weight Loss!"</h1>
 
 
<h2 style="text-align: center">Download The 1st Bonus >>></h2>
 
<h3 style="text-align: center"><a href="http://bit.ly/14473an">DOWNLOAD THE BONUS HERE</a></h3>
 
The FREE Bonus ebook - The Fat Loss Factor 5 Toxins In Your Body That Sabotage Your Weight Loss, by Dr. Charles (a $9.99 value): This ebook created by A Board Certified Chiropractice Physician, Dr. Charles details parasites (how common they are) and how to get rid of them, food additives, interesting facts on protein, stress, emotional eating and more! 
 
 
<a href="http://bit.ly/14473an"><img src="FLF_5_toxins.jpg" width="259" height="330" alt=""/></a>
 
 
<h2 style="text-align: center; font-family: 'Myriad Pro'; font-size: Non;"> </h2>
<h2>Download
 The 2nd Bonus >>>
</h2>
 
 
<h3 style="text-align: center; font-family: 'Myriad Pro'; font-size: 19px;"><a href="http://bit.ly/14pMUL7">DOWNLOAD THE BONUS HERE</a></h3>
 
The FREE Bonus ebook - The 7 Habits Of Highly Effective Weight Loss, by Dr. Charles (a $4.99 value): This ebook created by A Board Certified Chiropractice Physician, Dr. Charles contains 7 highly effective habits plus one secret bonus habit. A few of the habits explained are the "pyramid, grazer and holiday" principles. Make sure you know and master these basics. A new habit takes 300 repeptitions to implement and 3000 repepitions to break. 
 
 
<img src="FLF_7_habits.jpg" width="259" height="330" alt=""/>
 
 
 
<h2 style="text-align: center; font-family: permanent-marker; font-size: 24px; font-style: normal; font-weight: 400;">Download The 3rd Bonus >>> 
 
 
 
 
 
</h2>
<h3 style="text-align: center; font-family: 'Myriad Pro'; font-size: 19px; font-style: normal; font-weight: 400;"> 
 <a href="http://bit.ly/19ZveOv">DOWNLOAD THE BONUS HERE</a></h3>
 
The FREE Bonus ebook - Lessons From The Miracle Doctors A Step-by-Step Guide To Optimum Health and Relief from Catastrophic Illness, by Jon Barron (a $19.99 value): This ebook created by Jon Barron is highly accepeted for its value and knowledge that has helped inform others about healthy practices and alternatives to traditional medicine. 178 pages in length, it is a must have for anyone serious about improving their health today, especially for those that have experimented with alternative medical treatments before. 
 
 
<img src="FLF_MD_lessons.jpg" width="259" height="330" alt=""/>
 
 
These bonus ebooks are highly recommended and will serve as a cumulative or additive effect to the results from The Fat Loss Factor. Make sure to experience this amazing remedy as the entire package, bonuses included. 
 
 
<h2 style="text-align: center; font-family: permanent-marker; font-size: 19px; font-style: normal; font-weight: 400;">THE FAT LOSS FACTOR REVIEW</h2>
 
<a href="http://dc06fet7mc2e2y31tboekenhis.hop.clickbank.net/">The Fat Loss Factor</a> is here and exposed. Do you have a weight related problem or maybe you are someone that just wants to lose some pounds to feel and look better? Perhaps you have stubborn bodyfat that won't come off. This is where The Fat Loss Factor can help you achieve your dream. It is a revolutionary program ready to be TAPPED into today. Within 10 minutes you can begin to delve into the information that puts you closer to your goal or ideal body weight. Unlike your typical crash diet that may leave you heavier in the long run, the Fat Loss Factor preaches a novel, one-of-a-kind call to action; however, who is Dr. Charles, what does he know?
 
<div id="wrapper">
 
 Dr. Charles is: 
 <ul>
 <li>A Board-Certified chiropractic physician</li>
 <li>Certified wellness practitioner </li>
 <li>Certified advanced nutritionist </li>
 <li>Speaker & has </li>
 <li>Helped thousands reach their weight loss dream</li>
</ul>
</div>
</ul>
 
Dr. Charles invented the Fat Loss Factor after an experiment with his favorite client. Lory, after her pregnancy was at a whopping 210 lbs; however, at the end of Dr. Charles' innovative weight loss solution, Lory weighed only 120 lbs total! That's a total weight loss of incredible 90 pounds! In addition, Lori's genes were tainted with diabetes and obesity throughout her family lineage. Lory accomplished this feat while rearing her child. In the picture below, Lori stands accomplished on the beach at the fat left. 
 
 
<img src="Before&Aftersnaps.jpg" alt=""/>
 
 
<h2 style="text-align: center; font-family: permanent-marker; font-style: normal; font-weight: 400; font-size: 23px;">WHAT CAN THE FAT LOSS FACTOR DO FOR ME?</h2>
 
<ul>
<ul>
 <ul>
 <ul>
 <ul>
 <ul>
 <ul>
 <ul>
 <ul>
 </ul></ul></ul></ul></ul></ul>
 </ul>
 </ul>
Lori lost an incredible 16 dress sizes! She realizes a size even smaller than her highschool days, a goal you can accomplish as well! Women, especially need a program like The Fat Loss Factor when considering the barriers to their success. Let's review basic physiology to edify you in understanding the culprits. Success will be more practical when we have knowledge of what's working against us, right?
 
</ul>
 <img src="women_hurdles.jpg" alt=""/>
 
<h2 style="text-align: center; font-family: permanent-marker; font-style: normal; font-weight: 400;">SUCCESS WILL BE YOURS!</h2>
<dl>
</dl>
 
 
 
 
 Charles pondered, if Lori can do it, despite her barriers, than many people will experience asoulte weight loss through The Fat Loss Factor. Their bodies will be SOLD to fat loss. People will meet and exceed their expectations and guess what? There is proof. Go now, to this video page >>> <a href="http://kimbroj.flfenglish.hop.clickbank.net">here</a> and scroll down to the bottom of the page to view the amazing quanity of facebook comments. Notice thousands of comments from people suceeding like you will, you can do it! Visualize your way to the finish line, you can become the next customer to post a success story. Why wait, "<a href="http://kimbroj.flfenglish.hop.clickbank.net?pid=checkout">Get it</a>" within minutes from now. Experience joy!
 
WHAT ONE CUSTOMER WANTS YOU TO EXPERIENCE
 
 
<div id="FLF Movie"><center><iframe width="420" height="315" src="//www.youtube.com/embed/vL5tYcuc5Jg" frameborder="0" allowfullscreen></iframe></center></div>
Video Caption: The Incredible <a href="h.hop.clickbank.net?pid=checkout">Fat Loss Factor</a> yours now!
 
 
<h2 style="text-align: center; font-family: permanent-marker; font-style: normal; font-weight: 400;">WHAT DOES THE FAT LOSS FACTOR PREACH?</h2>
 
 

 With an initial running time of 12 weeks, the first couple are dedicated to detox. After purchasing, you'll have many items to help you reach your goal. On page 30 of The Fat Loss Factor are recommended foods that will detox your system, binding fat and destroying it from the body. These handy foods are generally organic. You'll also learn which foods are hazardous to fat reduction. Not to mention Dr. Charles' mailing list will keep you current with what foods to intake. Image that, constant reminders to help you reach your goal, that's all included and very handy. You're beginning to see and realzie how it all comes together in unity to work for you.
 
 
 <h2 style="font-family: permanent-marker; color: #000; font-style: normal; font-weight: 400; text-align: center;">TELL ME MORE ABOUT THIS POTENTIAL SOLUTION</h2>
 
 
 
 
I want you to know exactly what you might decide to purchase which is why I have included the entire table of contents to the main ebook of the series: The Fat Loss Factor. Note this table of contents is condensed for the purpose of copyright. You'll actually get more than what you see below. Note The Fat Loss Factor is divdied into 12 principles and contains 141 pages</blockquote>
 
TABLE OF CONTENTS (CONDENSED) CONTAINING "SENSITIVE INSIDER KNOWLEDGE"
 
 
<div id="Table">
 PRINCIPLE 1 PREPARING FOR SUCCESS 
 
 PRINCIPLE 2 OUT WITH OLD, IN WITH NEW 
 
 -PART 1 LAW OF UNADPTATION 
-PART 2 GET RID OF TOXINS
 
 PRINCIPLE 3 LIFESTYLE UN-DIET 
 
 -LIVER FUNCTION 
 -PHASE 1 - MASTER CLEANSE (3 TO 10 DAYS) 
 -D-I-E-T - A FOUR LETTER WORD 
 -FIBER FOR LIFE 
 -PROTEINS 
 -THE SKINNY ON FATS 
 - FAT LOSS FACTOR'S 15 FOODS FOr MAXIMUM WEIGHT LOSS 
 -DON'T DEPRIVE YOURSELF OF THESE 
 -EAT THESE FOODS TOGETHER TO PACK ON THE POUNDS 
 -SMOOTHIE IT UP 
 -FAT LOSS FACTOR'S 3 AXIOMS OF SUCCESS 
 -FOOD COMPANIES FATTEN YOU UP AND MAKE YOU SICK 
 -WHAT YOU DON'T WANT TO SEE ON A FOOD LABEL 
 -STRUCTURED EATING 
 -BREAKFAST: THE MOST IMPORTANT MEAL OF THE DAY - OR IS IT? 
 -THE FAT LOSS FACTOR DIET PLAN REVEALED 
 -PICK YOUR WEIGHT LOSS PLAN 
 -THE 48-HOUR FAST
 
 PRINCIPLE 4 WASH AWAY FAT WITH WATER 
 
 -BENEFITS OF DRINKING WATER
 
 PRINCIPLE 5 GOOD HEALTHY SUPPLEMENTATION 
 
 -TOP 12 SUPPLEMENTS FOR HEALTHLY WEIGHT LOSS
 
 PRINCIPLE
 6 REBUILD YOUR BODY & MELT FAT ALL DAY LONG 
 
 -SIX WORK OUT EXERCISES 
 -REASONS WHY YOU SHOULD EXERCISE 
 -LINGO: THE LANGUAGE OF WORKING OUT 
 -PROPER POSTURE DEFINED 
 -THE LAW OF ADAPTATION 
 -BEST TIME TO EXERCISE 
 -SUGGESTED WORKOUT/TIMES
 
 PRINCIPLE 7 SCULPT MUSCLE AND TRIMFAT 
 
 - THE DREADED CARDIO 
 -HIGH INTESITY INTERVAL TRAINING 
 -ULTIMATE FAT BLASTER
 
 PRINCIPLE 8 IT'S ALL A MIND GAME RELAX 
 
 -STRESS AND WEIGHT GAIN 
 -HOW TO DE-STRESS 
 -ELEMENTS OF A HEALTHLY MINDSET 
 -3 FORMS OF EXERCISE THAT CAN DE-STRESS YOU MIND
 
 PRINCIPLE 9 NO BREATHE, NO LIFE 
 
 -DEEP BREATING ROUTINE.. 
 -TOP 7 REASONS TO GET A GOOD NIGHT'S SLEEP 
 -12 WAYS TO RELAX 
 PRINCIPLE 11 LOOK YOUR BEST TO FEEL YOUR BEST 
 -TOP TEN MAKEOVER TIPS
 
 PRINCIPLE 12 TURNING YOUR PROGRAM INTO A LIFESTYLE 
 
 -LIFESTLYE TIPS 
 -MOTIVATION TIPS 
 -DEPRESSION/SELF ESTEEM ISSUES 
 -BELLY FAT TIPS 
 -ADDRESSING HYPOTHYROIDISM 
 -BINGE EATING, EMOTIONAL FOOD CRAVINGS, AND PORTION CONTROL 
 
 APPENDIX 
 
 -TOOLS FOR A FAT LOSS FACTOR KITCHEN 
 -FAT LOSS FACTOR HOME GYM EQUIPMENT
 
 
</div>
 
 
<h2 style="text-align: center; font-family: permanent-marker; font-style: normal; font-weight: 400;">WHEN I PURCHASE, WHAT DOES THE "PACKAGE CONTAIN"?</h2>
<div id="PACKAGE">
 
 <ul>
 <li>The Fat Loss Factor Ebook</li>
 <li>A Quick Start Guide (Start Here)</li>
 <li>10 Minute Raw Food Recipes</li>
 <li>90 Day Meal Plans</li>
 <li>Master Cleanse Videos (Access anytime)</li>
 <li>FooJoo Software</li>
 <li>Fat Loss Factor Diet/Exercise Log</li>
 <li>Fat Loss Factor Workout Beginner</li>
 <li>Fat Loss Factor Workout Intermediate</li>
 <li>Fat Loss Factor Workout Advanced</li>
 <li>Fat Loss Factor 15 Minute Sample Workouts 1-5</li>
 <li>Fat Loss Factor Goal Setting Guide</li>
 <li>Fat Loss Factor Grocery List</li>
 <li>Fat Loss Factor Measurements Form</li>
 <li>Fat Loss Factor Recipes eBook</li>
 </ul>
</div>
 
 
Don't forget your bonuses above and check out these testimonals below
 
 
<h2 style="text-align: center; font-family: permanent-marker; font-style: normal; font-weight: 400; font-size: 23px;">FAT LOSS FACTOR SUCCESS STORIES</h2>
 
Since starting this diet in April, I have lost 25 pounds!!! I love this diet…
 
Hi Michael….Since starting this diet in April, I have lost 25 pounds!!! I love this diet…I eat plenty and have found
many delicious recipes to sustain me. I eat an apple a day (along with a wide variety of other fruits) and have found that I actually crave the apple, I went to the fridge yesterday and found no apples in the fruit drawer, so I jumped in my car and headed straight for the local fruit stand to replenish my stock. ( like a smoker does for cigarettes) It’s nice to know the many benefits I am getting with something I’ve come to really enjoy!
 I have 5 pounds to go to accomplish my weight goal….once there, I may set a new one…just for fun!
Warm Regards,
Joyce Borodemos
 
 
I had my 16-year old daughter run through it once school let out. In 2 weeks she dropped 24 pounds...
 
Hi Mike
I just thought you might be interested on an update…
I loved the 2-week phase diet so much that I had my 16-year-old daughter run through it once school let out. In 2 weeks, she dropped 24 pounds (including a significant amount of bloating around her midsection) and is under 200 pounds for the first time in years. She now has a waistline. Even more significantly, when she first started, she complained that the food was tasteless. That disappeared within a couple of days and my junk food-loving teen was able to appreciate the taste of fresh produce again. All the chemicals she was pumping into her body had so significantly altered her taste buds that she couldn’t even taste real food until she’d been able to cleanse her palate for a couple of days. Today was her first day off the meat-free diet and she really wanted a piece of marzipan (her favorite treat) and a bit of naan. Both repelled her when she tried to eat them. She complained that they tasted like chemicals! In fact, she ran to the fridge and piled a bunch of fresh veggies on plate to drown the awful taste of what used to be some of her favorite comfort foods.
Here’s the best part…she’d suffered from debilitating migraines on a DAILY basis. They were so bad that she missed a significant amount of school over the past few years. She has not had a migraine since the second day of the meat-free diet.
 As for me, I’ve noticed significant changes too. I used to have to take 3 pain relief pills to even begin to combat the headaches I’d get from working at my computer. Now, even a half dose (1 Advil) will do the trick if I even need it. But most of all, I appreciate the closer bond this process has forged between me and my daughter. Although we’ve always been extremely close, she resented my being a personal trainer and was loathe to follow any of my professional advice. That was the one area where we could never see eye-to-eye. But between going through this nutritional change and the talking we did on our hour-long daily walks together, she’s found a new interest in living a healthy lifestyle. As a trainer, I am inspired by the benefits of your program. As a parent, I’ll be forever grateful to you because Fat Loss Factor is showing my daughter that she can, indeed, succeed at making positive changes to her body and her health that will last a lifetime!
Now, we’re really eager to start exercising together. (I’m taking your advice and skipping the lemonade detox, and I’m reluctant to have my daughter do it considering her age and health history)
 Thanks again! You’re a true guru in my book!
 

 
I watched your video many times over a period of several months before finally deciding to try your program. Within a week I noticed a tremendous difference...
 
LOL Michael, 
I actually have hypothyroidism and take medicine everyday but do not use it as an excuse for being overweight. I am overweight because I made bad decisions about food and did not exercise properly. 
Since starting your program I feel better and have gone down one size in clothing. Sure, there were a few modifications to ease into these changes. After all I am in my late 50s and have been out of shape for a long time. There has been a little cheating but not much. I am sticking with this and will tighten the reins more and more as time goes by.
By saying that I FEEL better means exactly that. I get better sleep. My joints more freer. I breath easier without so much abdominal pressure pushing up on my diaphram. It never occured to me flushing my system would make me feel so great. This ha such a positive effect on my attitude also.
I recently tried the Flat Belly Diet. It had me eating every 4 hours and a MUFA with each meal. Yes there are 'good' fats but MUFAs are still fats. I was eating twice as much foods as before and about 10 times for fat then before. I gained weight and was demoralized. 
I watched your video many times over a period of several months before finally deciding to try your program. Within a week I noticed a tremendous difference. Flushing out the toxins from my body has made me convinced you have me going in the right direction. 
I am slowly trimming up. My whole attitude has changed. I FEEL better and am not starving myself or obessing over food. my appetite has decreased. It's that simple.
Thank you for helping me change for the better. 
Sincerly, Hazel. 
 
<img src="FinalReview.jpg" alt="" id="final"/>
<h2> </h2>
Program name: The Fat Loss Factor 
 Author name: Dr. Charles D.C. and Lori A. 
Summary: This is a unique and revolutionary approach to dieting which I understand many people are participating in and are repeating the benefits of fat loss from.The program preaches detoxification and dieting with updates delievered via email to keep me ontop of my game and current with the Jones'. Exercise is reviewed and expressed in moderation. I understand if I hate the program and it fails to help me, I can return it without question for a full-money back guarantee within the first 60 days or 2 months. 
 
I understand this package is worth at least $97.00 but today am receiving a steal at the price of $47.00. I know that Dr. Charles has used these techniques in his clinics charging clients upwards of $500.00 to reap the same benefits I can gain for only $47.00. I also understand the package which includes many items not just the Fat Loss Factor ebook comes with one year of consulting with Dr. Charles via email. 
 My bargin price: $47.00 only 
 Guarantee: 60 days, no questions asked, hassle free, money back guarantee. 

 
 
<img src="chevron.jpg" alt="" id="chevron"/>
 
<a href="http://kimbroj.flfenglish.hop.clickbank.net?pid=checkout"><img src="order4.png" alt="" width="412" height="215" id="order"/></a>
 
</div>
<div class="footer" id="footer">
<center><img src="footer.jpg" alt="" width="971" height="186" class="center"/></center></div>
</body>
</html>
External style sheet:
@charset "UTF-8";
h1 {
 color: #000000;
 font-style: normal;
 font-weight: 400;
 font-family: permanent-marker;
 font-size: 30px;
 text-align: center;
h2 {
 font-style: normal;
 font-weight: 400;
 font-family: permanent-marker;
 color: #000000;
 font-size: 24px;
 line-height: 10px;
 text-align: center;
.adjustment {
 text-align: justify;
.center {
 text-align: center;
#wrapper {
 margin-left: 200px;
 text-align: left;
li {
 background: url(sunny3.png) left center no-repeat;
 list-style: none;
 padding-bottom: 5px;
 padding-left: 26px;
 padding-right: 30px;
 padding-top: 7px;
 text-align: left;
 font-family: "Myriad Pro";
 font-size: 19px
.hightlighter {
 background-color: #FFFF00;
 font-family: permanent-marker;
 font-size: 23px;
 font-style: normal;
 font-weight: 400;
.title {
 font-family: "Myriad Pro";
 font-size: 19px;
 font-weight: bold;
p {
 font-family: "Myriad Pro";
 font-size: 19px;
 text-align: center;
a:link {color:#00F;
h3 {
 font-family: "Myriad Pro";
 font-size: 19px;
 text-align: center;
Thanks so much, as above you can see I defined a:link {color: blue;}

In CSS, there are five states for links
a:link
a:visited
a:hover
a:active
a:focus
a:link (=unvisited, or never clicked)
a:visited (=clicked at least once)
a:visited is purple in most browsers by default.
Thus, you need to define a:visited in your CSS and it should come after a:link (otherwise you'll never see it)
One solution would be:
a:link, a:visited {
 color: #00F;
but bear in mind that visitors find it handy if a:visited is a different color to a:link so they know which links they've already clicked on.
a:link {
 color: #00F;
a:visIted {
 color: #SOME OTHER COLOR TO A:LINK;
a:hover {
 color: #F00;

ARD Clients Status Says Offline but Online

Does anyone also have a problem where certain ARD clients statuses say that they are "offline", yet they are technology online and are still available to control and observe? I have an entire list where half of the client statuses read offline, even though the machines are online and accessible. Does anyone know how to resolve this problem? It is driving me crazy.

Hi TeenTitan,
I tried your method and it also worked. I deleted the client from the All Computers list, and then re-added the client's IP manually within the Scanner. It seems like all 3 of our methods will work depending on the situation. Good stuff. Appreciate your reply!
TeenTitan wrote:
with the computer that shows as offline, but is online, do you see the ip address?
if so, have you tried searching your "all computer" list for that IP address? You might find another computer on your "all computer" list with that ip address. if so:
select the computer listed with that IP address,
get info on that computer record
delete the IP address from the computer record
click done
go back to the computer that was online, but was listed as offline, see if it's not being listed as online. If not, try chicster trick again.
Good luck

Anyone know why uploads contacts disappear from the iPhone 5? Half of my number is suddenly gone, and this happens over and over again? Kata-*******-stroff! Grateful for answers?

IPHONE 5
Anyone know why uploads contacts disappear from the iPhone 5?
Half of my number is suddenly gone, and this happens over and over again?
Kata-*******-stroff! Grateful for answers?

do you sync your contacts with an application in your computer? or use iCloud?
I can't tell you why the contacts disappear but you can get them back without much hassle by syncing through iTunes with your computer.
do you regularly make backups? if so, you can restore your iPhone using the backups and get your contacts back in your iPhone.
It is strange that half of your contacts are gone over and over again. Do you have Groups that are unchecked in your iPhone? If so, the contacts in those groups will not appear in your contacts list but they are in your iPhone and be recovered by re-checking the group name.

ARD Client Doesn't Show When Using Scanner and Network Range

All-
When I use the Scanner in ARD3 to scan a remote Network Range over the internet, the ARD client that I KNOW EXISTS in that same IP range DOES NOT show up (other ARD clients that I'm not interested in do show up, but not the specific ARD client I need to observe/control).
If I then call the user at the remote ARD client on the telephone, and have them give me their IP address (using www.whatismyip.com, for example), I can use the Scanner in ARD3 to "find" the ARD client and add it to my All Computers list. Process: change the popup box to read "Network Address" instead of "Network Range" and set the IP address field to the address provided by the user.
Why doesn't the remote ARD client show up when I scan for it using a Network Range in ARD3? Obviously, I don't want to have to call up each user every time I need to perform maintenance/control a client to get their (dynamic) IP address.
I could use dynamic DNS, but that's overkill. If I know (from experience) that my ARD clients are in IP ranges X, Y, and Z, then I SHOULD be able to simply scan for them (or so I thought).
Any help appreceated.

Updated to ARD3.1 (admin and clients), but that did not solve the issue.
Let me try to restate the problem:
The ARD client is out of state/across the country (i.e., different sub-net) using a dynamically assigned IP adddress. I can (for now) connect to that ARD client successfully, and perform all ARD functions (that I've tried so far) becasue I know (for now) that client's IP address (I called and spoke with the user who used www.whatismyip.com to give me their IP address). So what's the problem, you ask?
Some time in the future, that same ARD client will have a new, dynamically assigned IP address. I'd like to be able to connect to that client without having to call on the telephone and ask the user what IP address they have been assigned now.
My thinking was that I could make a pretty good guess at their IP address (based on their old IP address, and the way Cable and Telco ISPs allocate/lease IP addresses). For example, if their current dynamic IP address is 999.888.777.45, I could guess that a subsequent dynamically assigned IP address would be in the range 999.888.777.2 to 999.888.777.255. With ARD, I could simply scan that range of network addresses using the Scanner and quickly find the ARD client I want.
I tried to do just that, and the ARD scanner did not find my client when I scanned the network range that the ARD client was actually in. It showed other ARD clients (that I do not administer, own, or want to hack into), but not the one I do want to observe/control/maintain (and have a legal right to). Somewhat paradoxically, when I used the Scanner to find the same ARD client by specific IP address, there was no problem.
Why doesn't the ARD Scanner "see" the ARD client when scanning the network range?

Downgrade ARD client software from 3.4 to 2.2?

Hi,
I'm running Apple Remote Desktop 2.2, however the Mac Pros (running 10.5.8) which I want to control have ARD Client 3.4 installed.
Is there any way to downgrade the client software so I can use ARD 2.2?
At the moment, when I try to, for example, send a message using ARD 2.2 to a Mac Pro running ARD Client 3.4 I get an error message reading:
"Failed on all. Status: Newer Client software (3.4)"
Many thanks in advance for any assistance.

ARD 2.2 is not supported on Leopard nor on Intel-based Macs. At least one user (raus), though, posted here that he got ARD 2.2 to work in Leopard, but there are no guarantees. From the finder, navigate to:
/System/Library/CoreServices/RemoteMangement
From the folder, delete (or move) the ARDAgent v3.X file. Reinstall the 2.2 update for ARD on the Apple site. (This may be optional; the original poster just reinstalled the update to be safe.) You can reportedly now run Remote Desktop 2.2 in 10.5. This works for PowerPC and Intel Mac.
Note, though, that this is completely unsupported by Apple and may or may not work, or may cause issues. For proper support for Leopard, you need ARD 3.2 or later. Your best option is to upgrade your administration system to ARD 3.4, which is available through the Mac App Store for only $79.99 for the unlimited-client version.
Good luck.

Continuous scan for ARD clients

Hi. I need to find all the Macs on our campus and and set them all to point to a specific task server. I can scan for them inside of ARD, but the problem is it just gets a snapshot of the network at that exact moment. Also, when you repeat the scan all the computers it found disappear and are replaced with a new snapshot. What I would like to do is have it loop a scan and keep everything that it has found in the list. Is there any way to do that? Also, is there any way to set a default username/password and have it automatically add computers that it finds to a list?

Dear Dave
Thanks a lot for your help. It's really great getting answers and advice in discussion groups by dedicated people.
I finally manage to get all my ARD Clients fully accessible. My mistake was that I was to much concentrated on the Client setup and not to my own ARD admin workstation. The essential thing was that on the router belonging to my ARD admin station I had to open and map/forward the ports 3283 and 5900 too. And as soon as i did it worked.
A pritty nasty thing I could have solved earlier by reading the ARD Admin Guide on page 49 more carefully.
Thanks, Andy

HT5170 Why would I be getting this update if I am not, to the best of my knowledge, anyone's ARD client???

Why would I be getting this update if I am not, to the best of my knowledge, anyone's ARD client? I have not installed ARD in this computer, but am constantly getting permissions repair messages regarding remote management from Disk Utility. Very weird...

Yes, it's annoying but the messages are innocuous and you may ignore them. They will be repeated every time you repair permissions. The ARD client was installed by Software Update at some point in the past.
You don't need to repair permissions unless you've received a permissions error message from OS X.

Remote Desktop repeatedly installs ARD Client for standard users...

ARD 3.2 running on OS 10.5.4 on MacBook Core2Duos...
These are machines imaged from an asr disk image...
No issues with admin users...
Every time Remote Desktop is launched by a standard user, a admin user name / password is required and the Apple Remote Desktop Clint is reinstalled. After, ARD runs normally until it is quit and relaunched, even without a user logout...
Making the standard user an admin user resolves the issue. The issue returns when the admin right are removed from the user...
Have run permission repairs, removed and reinstalled Remote Desktop, manually checked permissions, etc...
It appears that from the standard user perspective, the ARD Client software needs to be updated. ...
Any ideas out there? I have to deploy these machines NOW and I am running out of ideas on this...
Thank you! Les

Dave,
Thank you for the ideas. While you are pretty much correct in what you have said, these are unfortunately not my issue(s). I wish they were!
1) ARD will run fine for a standard user (at least it did in Tiger) as long as it is properly setup and licensed by an admin user ahead of time (especially the entry of the license code). This I have done, and the license code is recognized just fine. I too thought of the promote / demote idea and have tried it. While promoted, it launches fine for the user, but upon demotion goes back to reinstalling the ARD Agent at each launch of the program (this install process does not run while the user is promoted)...
2) The systems are from the same disk image. However, I have given system its own unique, valid, legally purchased serial number. Though the program is loaded on the image, it has been installed only. It is not run or licensed on the master, only on the end-user client machines...
It appears to me that from the standard user perspective, the system thinks that the ARD Agent needs to be updated. I have verified with the PackageMaker SnapShot utility that the ARD Agent and its related files are being installed when this happens, and they appear to be the only thing being installed. The Remote Desktop Admin program itself seems to be fine.
Does anybody know exactly what happens at the file system lever when Remote Desktop is launched? I am thinking my standard user is lacking access to a particular file or directory or right, and I am sure I could quickly find it if I new what to trace. Watching fs_usage has yielded lots of information, but nothing that has helped...
I have also removed and reinstalled Remote Desktop to no avail. Disabled all ACLs on the file system, placed known-good receipts and run permission repairs, and forced chmod -R 777 down the path of everything I can find with the names Remote Desktop, ARD, etc...
I am a little worried at this point that the issue is created by the imaging process something like the question marks in docks in the latter updates of 10.4. I have seen similar issues come up (launching apps under Rosetta being one) with users' LaunchServices property lists after moving their home directories from one volume to another, making the issue very hard to track down, as they reside in files that do not contain the name of the app being affected...
Any further ideas would be much appreciated!
Les

Issues with intel ARD clients

Blithely installing ARD from disk to update the client on a new intel I seem to have hit a snag.
The machine is no longer accepting observe or control requests. Can see what's happening in the scanner window, chat and get reports etc but no control or observe.
Tedious issue. Any ideas?

That may be your problem. The native ARD client for Intel (2.2.1, I believe) is, to the best of my knowledge, only availble on the install disks that come with the iMac and MacBook Pro. I think perhaps your installation overwrote the Intel-native ARD client with the PPC version, which is trying to run under Rosetta and failing to run correctly. I'd suggest reinstalling the ARD client from the iMac's install disks. I'm not sure if Pacifist, a utility to extract particular packages from the install disks, will work with the Intel Macs or not. If not, then you may have to reinstall Mac OS X.
Hope this helps.

I just attempted to download a file and send to me, but it may have gone out to all my contacts - how can I tell?

I was just attempting first use of adobe send and it looks like I may have sent this to all my email contacts, how will I know?

Did the unshare. Thank you
From: bob.treitman <[email protected]>
To: Robert Goldsmith <[email protected]>
Sent: Tuesday, March 31, 2015 2:52 PM
Subject: I just attempted to download a file and send to me, but it may have gone out to all my contacts - how can I tell?
I just attempted to download a file and send to me, but it may have gone out to all my contacts - how can I tell?
created by bob.treitman in Adobe Acrobat.com Services - View the full discussionIf it says "Anonymous" then the only way that it would have gone out to all of your contacts would be if you sent it to them through your email client. And it would be in your email's Sent folder (not Adobe Send's). If you look at https://cloud.acrobat.com/sentfiles, does it show that the file has been Viewed? If the Views column shows a 0, then nobody has yet viewed it. If you're concerned, you can select the file by clicking the check box, then select Unshare. That will make the file inaccessible to anyone other than yourself. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-7392942-745487/900-90/SentTab .png If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7392942#7392942 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7392942#7392942 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Acrobat.com Services by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Anyone tried the new ARD Client just released today (2-1-2012)

Has anyone tried installing and running the new ARD Client released today, Feb. 1, 2012? The info provided by Apple about this update seems to be kind of thin in exactly what was changed.3.5.2, It lists only screen sharing and controlling a computer with two displays. If you have installed it what have you found as both improved or degraded. What OS do you have installed on your client systems? Any changes specific to Lion or Snow Leopard?

Today I connected to a remote server running Mac OS X Server 10.6.8 and ran the updater for Apple Remote Desktop 3.5.2.
It successfully completed and I was able to re-connect. Unfortunately I can no longer "drag and drop". When I pick up an icon, for example, I cannot release it (drop). My controlling computer is running OS X 10.7.3.
I may try to revert to the earlier version of ARD if possible. This is a pretty big problem for me; so I'm trying to figure out what is wrong with this updater. It may be that a reboot will fix the problem; but I have to wait for a convenient time to reboot my server. I need to also test connecting from a 10.6.8 workstation instead of 10.7.3, as this may be a "Lion controlling Snow Leopard" issue.
Either way, I would be wary of this updater.

Half of my ard clients have gone rogue... (offline, sleeping, denied)

Similar Messages

Maybe you are looking for