Half of my Powerbook's Screen is Darker

Hey all. Half of my Powerbook's screen is brighter than the other side. The left side is darker, and it gradually becomes brighter when you eyes move across the screen to the right. When you look at the entire screen, there is a definite difference. I've tried different lighthing angles, it has nothing to do with that. My Powerbook is also out of warranty. Anyone had this problem/know any ways to help?
I have also noticed that when I set the brightness to the lowest possible, the screen goes complete black...
Thanks for any comments.
Powerbook G4   Mac OS X (10.4.6)  

janani
See my reply in the thread called "Darker corner..."
15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4,   Mac OS X (10.4.5)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Similar Messages

  • Half of screen is dark with distinct line between dark/light

    half of the screen is dark with a clear line between dark/light visible.

    If you haven't done any trouble shooting then begin with restarting in Safe Mode and if that doesn't work reset (may need to do each 2-3 times) both the SMC and PRAM. Finally if that doesn't work run Hardware Test in Extended Mode (again 2-3 times) to test for hardware issues.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Anyone else have half their screen go dark?

    I've had my 27" iMac since May (bought refurbished from Apple.com), which had some yellowing and backlight issues, but I decided to just deal with it based on all the horror stories I've heard about going through a half dozen returns. But in the past few weeks, my iMac's screen began flickering every so often and dimming on the left side of the screen at random intervals.
    Finally, today, half my screen went dark and it's not changing:
    http://img535.imageshack.us/img535/940/screenwoh.jpg
    I don't have AppleCare, but I hope the standard one-year warranty covers this.

    My monitor started flickering this morning and by afternoon, the bottom half of my screen went gray or darker than the top half. I have an early 2008 model 20" iMac. I guess my computer is starting to go bad. My DVD drive stopped working correctly a couple of months ago as well. I can't burn DVD's anymore; keep getting error messages. My guess is that the heat generated on the iMac must shorten the lifespan of all the components inside, considering they are all so close to each other. If you've ever touched the top of your iMac, you'll understand what I'm talking about, as it gets extremely hot up there. Imagine what it must be like inside. This is my first iMac and will probably be my last. I paid too much for my computer to last such a short time. I like the compactness of it, but it's not worth the cost. All-in-on units make it more difficult to fix and more costly to fix as well.

  • Screen gets darker

    I cant find anything like this on the forum but perhaps I just missed something. For months now every 2 or 3 weeks the bottom right, bottom centre or the whole screen gets a bit darker. Normally if its part of the screen it get better after an hour but after a while even that does not happen. In the end resetting the PRAM or PMU is the only way to go to sort it out. I calibrate my screen every few days but always check before doing so that the screen has not gone dark again. Now I think this all started when bluetooth did a vanishing act as well. The computer tells you the hardware does not exist any more! This all started after one of the many 10.3 updates. Might not be all related to each other but thought best to mention it. Any ideas? When I say the screen goes darker I mean it goes greyer. There is no colour tints.

    Thank God other people have noticed this probelm as well! I too have been having this problem for about the last two month. Though, I noticed it after I purchased my iSight camera. I would certainly hope that this issue can be resolved quickly and does not become another "nano-issue."
    15" Powerbook G4, Al   Mac OS X (10.3.9)  

  • The top of my iPod touch screen is darker than the rest of my screen after the newest update?

    So today I turned on my iPod touch (5th generation) and it said there was a software update available. I updated it with no problem, but after the update I noticed almost half of my screen was darker than the rest at the top. (Posting screenshots below) I don't know if it's supposed to be like that because of the update or not. Also, I have a little blue dot (assuming it's a 'dead' or 'stuck' pixel) on my screen that was there when I bought the ipod BRAND NEW on February 13th of this year and I'd like to know if that may be affecting it? Any help would be appreciated! 
    The darker top screen:
    Using apps and Safari the screen is normal:

    Hi iBridgetx3,
    You can try several things:
    1.     Go to Settings>Wallpapers & Brightness, and turn the Brightness up or down
    2.     Go to Settings>General>Accessibility>Increase Contrast, and play with the three options available there - I turned off Reduce Transparency, and turned on Darken Colors and Reduce White Point, because I like the color gradation on the wallpaper on my Home screen. But if you don't like it, then make sure Darken Colors is off, and try that with Reduce White Point both off and on to see what you like best
    There are a lot of new settings specifically designed to address the variety of problems that people were having with the initial iOS 7 "look". Play around with them. You will probably find a combination that will suit you.
    Cheers,
    GB

  • Screen goes dark too quickly while on call

    Hi- I am just learning to use my new iphone 4, already did software update. When i am on a call, the screen goes dark within a few seconds so that i cant easily get back to the keyboard, the screen that allows me to go on speakerphone etc. Is this normal? I adjusted the auto-lock in settings but i couldnt find any adjustment for the screen going to sleep while on the phone. Also, is there any way to adjust the number of rings before the call goes to voicemail? Thanks.

    hey mehode,
    correct me if im wrong..
    laptop at maximum brightness or even if brightness level is set at half .. the backlight is off. ? And if you close the lid the backlight will suddenly switch on ?
    curious to know as this had happen before you installed that BIOS 7FETC7WW 2.27-1.08 , when did it start to happen ? was any new software installed before it started to happen ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Horizontal stripe in the middle of my Powerbook 17'' screen

    Hello to you all, Powerbook users with vertical stripes on the screen!
    A few weeks ago, a horizontal stripe appeared on the screen of my 2 years old Powerbook17".
    Almost useless to mention that the serial number begins mit W85... With a slight pressure of my thumb on the left side of the screen, the stripe disappeared but after a couple of days it appeared again and now persists. Until now I never had problems with LCD on Mac ( not even with my first LCD screen connected to a Powermac G3 ) and I'm ( still ) a convinced Apple fan, lucky ( well, almost ) owner of three Macs. I wonder why a serious company like Apple take so few care of its customers, when the problem is evidently caused by fake manufacturing.
    Has anybody already tried to call the customer service in the USA?
    Why don't local stores offer assistance for their customers?
    I'm really disappointed. Best regards Acanto
    Powerbook G4   Mac OS X (10.4.10)  

    Just a 'misery loves company' reply. I bought two 17" PB back in Mar '06 after our house was robbed and our laptops stolen. One for me. One for my son. Mine just had the inverter replaced because the screen went dark. OK. I've had Macs since the Mac 512k + and never had one problem. Annoying, but not a bad track record.
    Now, this week, my son's PB is starting the line in the display. Does this scream "There's an issue here!"? I shelled out $322.60 for mine, but am loathe to do the same for the second.
    BTW, the service at the Apple Store was superb and the turn-a-round time for the repair outstanding. I think Apple should pay for my second one, though.

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

  • MacBook Air Boots to OS, then screen goes dark.

    I have recently been working on an older style (A1304) MacBook Air with the 128GB SSD. I've been working on Mac's for years, and have worked on hundreds, but this is the first time I've ever come across this particular issue.
    Liquid damaged MacBook Air. Keyboard and Trackpad mainly took the brunt of the spill. Popped off the keys, cleaned it all up. Button for the trackpad no longer works, but everything else does. Entire computer was disassembled, no other liquid was found.
    MacBook Air boots up normally, and I was using it for a few hours to make sure everything was working fine. Left it to charge. Came back two hours later, and the screen was dark (but the image was still visible, as if the backlight was not on). Could see the mouse pointer moving, but backlight won't come back on. Turned off computer, turned it back on. Backlight works just fine, and it boots to the OS. Within 10 seconds of booting to OS, the screen goes dark (screen goes completely black with no image). Couple seconds later, light on the front starts to "breathe" indicating it's sleeping. Wake it back up, and image appears on the screen, but no backlight. Then it "goes to sleep" again.
    Boot computer to a Flash Drive with Snow Leopard Installer and once the blue screen comes on as if the installer is just about to pop up, it "goes to sleep" immediaetly. Though, the backlight and computer will stay on in the Apple Hardware Test for as long as I want. (ran it several times, "no trouble found". Also reset the PRAM, nothing helps.
    I was wondering if anyone has ever come across this. Completely baffled on whether it's a software or hardware (or combination of the both) issue I'm having.

    The keyboard and trackpad reside on top of the motherboard and all the components of the computer.  The keyboard and trackpad are not liquid proof.  It is VERY likely that the liquid made its way to the motherboard and has affected those components.  If EVER there is liquid spilled on a computer, the last thing you want to do is A. Turn it on to make sure it is working.. and B. Plug it in and charge it.  Do the EXACT opposite.  Unplug and turn off all power, and, if possible, remove the battery from it.  The liquid itself doesnt do the damage...the damage is done when the liquid comes in contact with the circuits and shorts out the contacts and components.  You could try to connect to an external monitor, if you have the means to do so, to see if it makes a difference, but it probably will not.  I seems that the motherboard is not functioning correctly. 

  • HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

    HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

    System Preferences > Displays.
    De-select "Automatically adjust brightness"

  • Lenovo T400 screen goes dark issue, some video driver problem

    Lenovo:
    Motherboard:
    CPU Type: Mobile DualCore Intel Core 2 Duo P8600, 2400 MHz (9 x 267)
    Motherboard Chipset:  Intel Cantiga GM45
    System Memory: 1992 MB (DDR3 SDRAM)
    BIOS Type: Phoenix (08/19/08)
    Display:
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    3D Accelerator: ATI Mobility Radeon HD 3470 
    Problem/Issue:
    Driver problem appeard after upgrading from XP to Windows 7.
    From the Device Manager I saw that ATI Mobility Radeon HD 3470 was not working properly and
    a) I did the "update driver software." After restart the screen light was darker than usual. (This was usual if I was working from battery but I was plugged in this time. ) 
    As I'm not the best with computers I thought my drivers might be in conflict and to prevent serious damages, I just
    b) disabled ATI Mobility Radeon HD 3470 from device manager. 
    This actually resolved the dark screen problem.
    c) then I went to Lenovo support site: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-72858
    downloaded newest drivers for ATI Mobility Radeon HD 3400 (Switchable Graphics Driver)
    and Intel 4500MHD (Intel GM45 Express Chip)
    For some reason while installine the: Intel GM45 Display Driver (version 8.15.10.2302) gives me error:
    "This Computer Does not meet the minimum requirements for installing the software"
    Also some problem appeard when installing the new downloaded version:
    ThinkPad Switchable Graphics Driver  (version 8.792.5-110424b-119200C)
    d) so I went back to device manager and made an update to ATI Mobility Radeon  from there. 
    Well, I got it working, but the screen went dark again. When I disable the driver it goes back to normal
    brightness and when I enable it again, it stays normal.
    I'll try to restart and see what happens

    We had the excat same issue.
    I could get the picuture back pressing the power button until it went to sleep and then wake it up again.
    After the I went to device manager to delete all display drivers both Intel and ATI and then reboot.
    doing the reboot windows found some drivers it could use.
    I then installed the switchable driver from lenovo.
    Now windows device manger report two display drivers:
    1)
    ATI Mobility Radeon HD 3400 Series, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    2)
    Mobile Intel(R) 4 Series Express Chipset Family, Version, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    So it seams the switchable ATI driver take over the Intel card and the Intel driver is not needed.
    At least the problem is solved for us.
    Regards Anders

  • HT3964 My MacBook Pro will not boot up. The screen remains dark although the the comput makes the characteristic start up sound. The sleep light is showing.

    MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?

    There is always the forum for MBP
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • On iPhone 4, the screen goes dark and freezes when I start Safari

    All of a sudden, today I can't access the internet via Safari on my Verizon iPhone 4. If I click on a link in an email or start Safari, the screen goes dark and freezes. What's up with this and what the fix?

    Hi
    Try holding sleep/wake + power button for 10 seconds, until you see the Apple Logo.
    See how that goes.
    Taylor

  • Screen is dark

    Screen is dark, and adjusting the brightness on my Ipod4 won't help.

    Try here:
    iPod touch: Hardware troubleshooting
    iOS: Not responding or does not turn on
    An appointment at the Genius Bar of an Apple store may be in order.

  • My IPad screen is dark and will not turn on. I have charged the battery and nothing. I have tried to reset the device as well with no luck. Any suggestions?

    My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

Maybe you are looking for

  • Keyword filtering Bridge 2.1

    I migrated from Elements to Bridge and found a difference in the way Bridge filters keywords compared to Elements. Example: I have 3 images with assigned keywords: image1 (keyword1), image2 (keyword2), image3 (keyword1, keyword2). If I check keyword1

  • Error with OpenSearch result source in Sharepoint online

    I have error with result sources that use the Opensearch protocol. I add them via Site Settings -> Edit Result Source -> New Result Source but everytime I test them in the Result Sources list I get error saying key is null or empty Parameter name: ke

  • Curve 9300 scroll up seems to get crazy after upgrading to 6.0

    since upgraded to 6.0 a day after while chating on BBM my 9300 get crazy and scroll up all the time . sometimes on any screen for writing smses or checking e-mails. Can we fix this are do I have to reverse to original O.S version?

  • Self-assigned IP help

    There's other topics on this thread, but I can't find the answer. Last night everything was fine. Today, my Airport is self-assigning an IP address and although it can see the wireless network, it can't get out to the internet. I've turned the Airpor

  • How to map revision level materials to already created inspection plan?

    Dear All, I have created single inspection plan for many existing raw materials. Now it has been found that each raw material have different revision level as well as valid from date. My inspection plan is created on 02.07.2014 and each raw material