Half of my town has FFTC enabled, half does not.

I work on the internet, and I have to transfer files a fair amount so I rely on my internet and I've been keeping track of FTTC's rollout heading my way for the last year.  Since late 2011 it's said on the BT Infinity site and on Samknows that FTTC was coming in 30th August 2012 to my area.
Half way through August I looked up the BT Infinity site and found that the date had been changed to 30th December 2012.  Phoned up BT support and they said it's just a placeholder and that FTTC will reach my area between 30th August and 30th December.
My mate told me his brother, who lives a few hundred metres north of me, has fibre optic, so I looked up the site again and found the date had been pushed back to 30th June 2013.  Checked Samknows and it says "Available in some areas".
Doesn't seem fair for FTTC to be enabled in one set of houses but not on the houses right next to them.  What's this all about?!

Within an exchange area there will be some customers who can't get BT Infinity. There are several reasons why this could be the case:
Your phone line may be connected directly to the telephone exchange and not to a local street cabinet.
Your line may be too far from the local street cabinet to have a stable BT Infinity service.
Your local street cabinet may not be suitable for fibre optic cables.
We haven't yet got the council's planning permission to do the necessary work at your local street cabinet.
So, even though you may be within an enabled exchange area, it's possible that your particular line may not be able to have BT Infinity yet.
You may get more information from this site http://www.superfast-openreach.co.uk/where-and-whe​n/ enter your post code
if you see a yellow pin then click on it and you will be able to see infomation about your cabinet
The availability checker at www.bt.com/infinity has the latest detail about what speed your line can provide
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

    I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
    I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
    I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
    Windows 7 and iPad 2
    Kind regards,

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

    Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got  pop up saying "  "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
    Ive tried plugging this into 3 other computers same error message pops up .
    PLEASE help me . thanks (:

    Uninstall your USB drivers in your computer & reinstall.
    contact your pc manufacturer for the steps.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

    Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-(  it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

    As I said above, some of the new lightning cables have been known to be causing problems for some users.  Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
    B-rock

  • When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized.  Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
    Hope this helps

  • Computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

    i have an ipod nano 7th gen and when i plug it in for itunes my computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

    As I said above, some of the new lightning cables have been known to be causing problems for some users.  Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
    B-rock

  • TS1538 I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions

    . I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions?

    Hello Alexdad,
    We've an article that can help get your iPod Nano working with your computer.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • When I connect my Iphone 5 to my computer to tranfer pictures my computer says USB device attached to the computer has malfunctioned and Windows does not recognize it.  What do I do??

    I do not understand why my computer is telling me that my new iphone 5 has malfunctioned and Windows does not recognize it when I plug it in the computer.
    I have tried several times and gotten the same message.  Any suggestions?
    thanks

    Make sure you can see your device in the sidebar>>
       Open Itunes on your computer
       Click View
    _Click View Sidebar
    Then Try EXPANDING all sections in the following article, pressing CTRL>p, printing it all out and following the instructions step by step.  Use the instructions that apply to your computer's Operating System, but don't skip any steps.
    http://support.apple.com/kb/TS1538
    You are installing the Apple Mobile Device USB driver, which I did not have to do previously, so something in the updates has been left out / or changed. 

  • My computer will not recognize my iPod Nano when i connect it. I tried my laptop instead but it said the same thing - one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it. Can i fix this?

    My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already

    It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

  • Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

    i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
    or pen drive.  I have a HP pavilion dv4 series notebook.  the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
    in device status is says:  Windows has stopped this device because it has reported problems. (Code 43)
    location: Port_#0002.Hub_#0005
    driver provider:  microsoft
    date of driver: 21-06-2006
    driver version: 6.1.7600.16385
    HELP!!!!!!!!!!!

    Hi ameet2005,
    Please check if the following suggestions help:
    First, please disconnect all USB devices and then perform the following steps:
    1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
    if necessary.
    2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
    3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
    Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
    If the issue persists, please check if it can be resolved by running
    System File Checker.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • [39008] Logical dimension table X has a source that does not join to any...

    Hi Gurus,
    I have warning:
    "[39008] Logical dimension table X has a source that does not join to any fact source"
    WHERE X:
    PROMOTIONS,PRODUCTS, CUSTOMERS, CHANNELS
    but all logical table are mapped to fact.
    Eveb I can create reports for them
    (The metadata was derived from OWB 11gR2, SALES_EE)
    Thanks
    Laszlo
    Thanks for Your earlier answer as well!

    Hi,
    Did you create hierrarchy on that dimension.?
    Add contel level in fact source to hierarrchy detail for the fact that joins the dimension.
    Look at this for best practice...http://gerardnico.com/wiki/dat/obiee/hierarchy?s
    Please do close your previous thread assigning points by clicking helpful or correct to the replies
    Import XML file into rpd file
    Thanks,
    Srikanth

Maybe you are looking for