Half of screen not working

Opened the laptop today and the left side of the screen is as normal, there is a thick black line in the centre and the right side of the screen is white. No dots, no coloured lines, no damage has occurred. I am unable to shut down and restart laptop due to this. Bought the laptop from Argos at the end of April. Is there anything I can do to resolve this?

Is it possibal to get a virus on the iPhone or touch from a opened email or transfured from a mac with that has not gotten a new leopard update in 'bout a mounth or so. I also have a problem with email that started few days before the screen stopped working saying that it cannot connect to Ian's Mac Mail because the username or password is incorrect when I go to verizon.com to check the name and password they work my father never has time to update his iphone so I have to do it for him and a lot of my content that is not on his laptop gets transfured and he has been having the same problem now for some time and my mac has showen that message box when I check my mail on my mac which is rarly. Or could it be that I am running out of RAM or just plain memery last I check today I had a little more then 1GB of space left. I also wonder that if it is repaired that the whole touch screen needs to be replaced and might be coastly and why would only half of it work most of the time I think that ether the connection between the touch sencers and the motherboard is unstable or that a softwere error has accored and needs to be ether restored from the settings in the phone or restored as new and not from a backup??
Thanks
~Ian

Similar Messages

  • Bottom half of screen not working, need to turn airplane mode on

      3gs Bottom half of screen no longers works, or at least the bar at the bottom so cant unlock the phone .. i suspect that part of the screen doesnt work anymore, tried reset etc. i can play etc via voice control but i need to catch a 7hr flight later today .. any suggestions on how i could unlock, so i can get to the settings .. doesnt seem to be a voice control to unlock ... doesnt seem to be any control in itunes to amend setting .. must be something i can do!

    Your digitizer is not functioning correctly. This is the only way I know to slide the unlock bar. The digitizer is built as part of the Glass Front Screen and detects your finger movement. Take iPhone to Apple and they can try to Reseat Flex Cable # 2 the digitizer cable if it is just loose at the connector and not broken. Possibly repair under Warranty if you still have Warranty Coverage. Otherwise you will need a new Front Screen with Digitizer for 3GS. Before opening a 3GS make sure it is OFF, and keep it OFF during any repair.

  • Top half or screen not working

    Recently the top half of my iPhone's screen quit working. The bottom half works fine, but everything on the top half won't work. I've tried resetting it but to no avail.
    Any ideas? Need help!

    The screen is mist likely defective. It's been happening to some. Just contact Apple and they should replace the phone for you.
    1-800-MY-IPHONE
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Half my screen wont work, why?

    half my screen wont work, why?

    Warranty covers only manufacturing defects. Warranty does not cover accidental damage.
    Make an appointment at a Genius Bar in the nearest physical Apple store to have your iPhone
    evaluated.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Screen not working, says I need passcode to back up to PC and screen frozen

    Screen not working, stating I need a passcode to sync and back up to PC

    1st try the Restart and if need be try the reset
    Restart or reset your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT201559
    Best of Luck

  • Lenovo A1 - Touch screen not working after digitizer replacemen​t

    After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
    But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways. 
    I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
    When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

    Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
    You can say thank you by pressing the star left to my post IF I HELPED YOU

  • Water damage to iphone screen not working

    I need to back up to icloud, but my touch screen not working.  Siri is working, i can text. Is there any other way to backup contacts to icloud without touch screen?

    UUsually when a phone gets wet you put it in a bag of uncooked rice for 5 to 7 days, but that doesn't guarantee that it will work.
    you can get an out of warrant iPhone at the Apple store.

  • 8500 All in One - touch screen not working

    One minute the touch screen with all it's functions was working fine and then, bam (!), the touch screen stopped working and I can't even use the one/off switch to power the unit off - it does not respond.  Funny thing is that the printer is still working from my computer so I can still send a print job via the wireless.   With the touch screen not working I can't use any function from the unit itself (copy a hard copy, fax a hard copy) and if the unit runs out of paper I have to unplug it to reboot since I can't hit the 'enter' on the touch screen once I've reloaded. 
    Bottom line --- nothing from the unit itself works.  Has a printer fairy locked me out or does this sound like a hardware error?  Thanks for any help ...
    Linda T

    Excellent.  Let me know how round 2 treats you.  The sad demise could have been due to a couple of things...as a side question, is the climate where you live especially dry right now?  I may request that our testers recheck how well we handle a static shock on the product if it is dry where you live. 
    Regards, CF
    I work for HP and hope to make your day Sproutastic!

  • Ipod touch screen not working even after resetting to factory specs

    ipod touch screen not working even after resetting to factory spec.  lock symbol appears at top

    That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

  • Print Screen not working for user but working for Administrator

    Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
    09-14-2009 11:25 AM
    Hi I am new to this forum and am asking for your  help.  We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users.  We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work.  I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution .  Thanks in Advance .

    Jerry, that post you just answered was from nearly 4 1/2 years ago!  And that's the last time the OP was here.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Ipod touch 32 GB touch screen not work

    32GB  ipod touch touch screen not work  WHAT TO DO SOME BODY HELP ME MY PHONE NUMBER 09880252978

    If your iPod is not dry, dry it before further use. To dry:
    How to fix a wet iPod or iPhone | eHow.com
    It recommends drying for seven days and changing rice every day.

  • T61 LCD Screen not working at all !!!

    Hi, i have :
    1 - Thinkpad T61 6460 EF7
    2 - Windows XP SP3
    3 - Intel Centrino Pro Duo 2Ghz
    4 - NVidia Quadro 140NVS
    5 - 2 GIG of RAM
    6 - Latest drivers and updates installed
    I was working and suddenly :
    1 - my screen started flashing red
    2 - and then Blue Screen
    3 - crash
    4 - i can see the screen working but it shows nothing
    what i did:
    1 - i bought an external screen to see what's going on
    2 - external screen works only in safe mode and not in the normal mode and the Thinkpad LCD Screen still not working
    3 - i checked the BIOS ans in display Thinkpad LCD is checked
    4 - i've done a R and R restore, the thinkpad LCD screen resrarted working
    but
    1- the screen seems blocked by sometimes
    2- after reinstalling the laptop in a way to continue working on it
    3 - in the end of the day red flash, blue screen and screen not working anymore
    so please, is there any software solution or do i have a hardware problem ?
    thank you in advance

    I was referring to PC-Doctor bootable CD...
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    As for Turbo Memory, I don't have enough experience with it to claim anything...but am tempted to point at the GPU as being the component most likely at fault...
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Maybe you are looking for

  • Getting Values of MMBE transaction

    Hello all,      I need to get the Values of the MMBE transaction and use those values in my report for calculation. Can anybody suggest a way to execute the MMBE tranasaction from my report and get the values in a  table. Regards, Vijayakumar

  • Add section titles to "table of contents".

    I am attempting to build a book from a Genealogical Generational listing that indicates the generation number at the beginning of each section. I also add that number along with the section page number at the bottom of each section. i.e. Generation 1

  • My iPhone 4s doesn't work

    Hi, I bought an iPhone 4s via online shop in USA and I have been using it in Turkey.       My phone's IMEI number is 013049008325278. Last week, it was getting warm and then closed. I have tried to open it but couldn't. Then I shown it to the Apple's

  • IDOC Doubt

    Hi all, Is this the place to ask a doubt related to IDOC.. If so, please help me on my issue. This is actually the configuration to transfer data from IDOC (RFC Destination) to XI (RFC Destination). An IDOC can be send from SAP in 2 formats I believe

  • Orainventory corrupted in a cluster

    Hi, There is a 4 node cluster and I was assigned to apply a DST patch on one node (ex: server-C). And server-A and server-B have databases running on them but not on sever-C and server-D. When I checked server-C, I did not see any database on it. The