Half Period shifted Signal without copying code?

Hi everyone!
Here is the code which generates accurate PWM for Half bridge Control with programmable dead-time, now here is the issue i want to shift the same signals on two DIO's with half the period of the signal. i ve tried following:
1. I copied the same code in FPGA and delayed it with half period using a wait( but it is consumes double resources and some times the half period phase difference is also not accurate).
I need some other technique to shift the same signal by half-period( or copy paste the same signals onto 2 other outputs by not copying the same code and thus saving resources). Any help is appreciated.
Best regards,
azy
Attachments:
Half_Bridge_Driver.vi ‏38 KB
Riseing edge delay(SubVI).vi ‏8 KB

Hey azy,
I´ve two links for you. I hope they will help you.
http://www.ni.com/white-paper/3254/en/#toc6
https://decibel.ni.com/content/docs/DOC-1065
Will the frequency stay constant or do you want it variable?
regards Patrik

Similar Messages

Is it possible to redeem a digital copy code without using the DVD?

I have a Rambo digital copy code but no DVD rom drive. Is there was way to use the code and just download it off iTunes or not?
Also im in Canada.
Message was edited by: Mikerules868

From what I've read, the digital copy is on the bonus disk; it's not downloaded from the iTunes Store but rather copied from the disk.

How to use one application with multiple schema without copying application?

Hi,
Previously we are using oracle forms and by that we can manage by using a set of folders containing fmx and use different schema/database for different customers. so the source code comes from one individual file but used for different database users.
is it possible to do this without copying application in apex?
reason is because if applications are copied for each customer, and in a situation where a page has a bug, the developer must correct multiple pages across all the application. This would not be appropriate to manage.
could this be done in apex? or is there any other approach?

Hi,
An application is tied to its parsing schema, so it is not possible to have one code base which you can then point to different schemas. I have seen some threads relating to dynamically setting the parsing schema, but I don't think it has worked to well, and would not be a supported configuration by Oracle.
The normal way to do this is to have one schema and for each entity where it is logical you will have an extra key which is the customer id. I mention where it is logical, because not every entity needs its own data defined by customer. Some data will be common across all customers, such as lookup data and some entities will comprise child entities by which the data separation will be implied by the parent. You can then use Oracle's Virtual Private Database feature to implement a seperate view of the data through the application, based most likely on the customer who is logged on.
Hope this helps.
Regards
Andre

How to move applications without copying?

Hi there,
I just installed 10.7 today, after I found out that my MacBook Pro is a month too old to run 10.8. I've noticed a few changes. One of them is that my applications folder is not to my liking.
I organize my applications into folders. I have a LOT of applications and I'm an organized person. Having 150+ applicaitons in one folder would a) reduce my productivity and b) make me cringe every time I use my computer. OS 10.7 doesn't seem to like my choice. When I try to move applicaitons out of the base folder, the application is copied, not moved. Is there an easy way to move applicaitons without copying them? Do I have to hold a special key or do a 7-finger swipe or something?
I can move apps using a sudo mv command in the terminal. The last time I remember using a terminal to overcome the operating system trying to protect me from myself... oh, I remember. It was about 10 years ago when I was using a Windows machine, and it was the experience that convinced me to switch to Mac.
Now, before I get a thousand replys, please don't bother telling me not to move my applications. I've organized them like this for nearly a decade and I'm going to continue doing so. They don't update, they got confused... you can use whatever argument you want. I'm going to keep doing it this way. I don't save every document on my computer into one huge gross pile of crap, and I won't have my applications that way either. It's my computer and I should be able to organize it how I want (yes, I know software developers have to make choices in designing software. I just disagree with the choices made here, and I think hardcoding in paths is bad design). Launchpad doesn't allow for subfolders, so its out.
The question is, is there an "official" way to move apps, or do I have to kludge it through the terminal?
Thanks,
Adrian

Thanks so much for enabling my bad behavior :-).
Haha! No problem.
I'll also add that I still think its bad design to hard code in paths.
I agree. Like this one I discovered a while back:
The Adobe CS4 applications have their own new annoyance. I have found that if you remove the profile "sRGB Profile.icc" from the /System/Library/ColorSync/Profiles/folder, the File Info dialogue box in Illustrator CS4 will come up blank! So will the entire Adobe Extension Manager CS4 interface. What this one particular profile could possibly have to do with the display of a dialogue box, I don't know. You also can't move that profile to the /Library/ColorSync/Profiles/ folder, or the Profiles folder in your user account. While the profile is just as active in either location, the CS4 applications mentioned will blank out if that profile is not specifically in the System's Profiles folder.
Really bad programming there. For one, there's zero need in the first place for a display box to require any kind of profile. Secondly, there's also zero reason for the apps to hard code the location of a particular profile. If sRGB is in an active Profiles folder in any location, it should be able to find the profile the same way every other app does.
But I also wish there was a way to click a checkbox or something to take the training wheels off. I don't like the "Apple knows best" attitude, which is exactly what drove me away from Windows many years ago. But I digress...
Not completely. That's been a huge gripe from many, many users on Apple's decision making of late. As in, "What!? You removed Save As? What!? You mean I can't turn Autosave/Versions off!!??" Whose documents are these, anyway? The early Lion "feature" that insisted on opening all of the windows and apps you had open on a restart, again to mimic an iPad, which wouldn't stay turned off until enough users complained. And other examples where Apple is trying much too hard to try and make OS X look and behave like the iOS. Sorry, this is a desktop computer I'm using, not an iPad. Quit trying to make my desktop behave like an iPad. Different type of computer, completely different usage.

4.5b - Copy code to Notepad

Hi All,
I am working on SAP- 4.5 B ,I need to copy the code & put it in ECC 6.0.
So first i want to copy it into notepad.the problem here is that in 4.5 B only one line can be selected at a time.
How can I copy the entire code.
Please suggest.I promise to Reward.

Hi annapurna,
BASIS people can create transport and import it - saves lot of time.
Alternative:
Program REPTRAN will export code, includes, screens and text elements.
If it is not avaliable in 4.5: Use in ECC600 for itself and implement with Z name in 4.5 system. It is a simple report without includes.
code extract:
*& Report REPTRAN
*& This report allows to display and save complete programs and
*& function modules.
*& This report was originally written by Frank Wolf, Xaption GmbH
*& Its original name was ZREPTRAN (see www.abaps.de).
Regards,
Clemens

Sale order without material code

HI Friends,
Is it possible to create SO without material code i.e. only for the Description.
Regards,
Chetan.

Hi
The item category for a text item is TATX. Text item is an item containing text. Physically it is not a material and will not be delivered.
Check this link
[Item Category|http://help.sap.com/saphelp_470/helpdata/en/dd/55fb13545a11d1a7020000e829fd11/frameset.htm]
Regards

Excise invoice tab for without material code

Dear all,
I have created a PO with vat Condtion TAx code.
There are 5 line items are there in this PO. There are no material codes available for this 5 line items. all the line items are account assignment related items.
While doing GRN its asking the erro messgae like enter excise i nvoice no and date.
That too its not asking for all the line items. some items its asking some of them items its not asking the excise invoice.
j1id i have checked without material code and plant one line item will be maintianed.
But my doubt is why its asking excise tab for the items. That too only one item why its not asking the excise tab.

We are using TAXINJ so there is no chance to go for material group wise.
In j1id also i have removed the without material code one chapter id was maintained.
any clue?

How to import multiple XML files into one inDesign document without copy/paste ?

I use InDesign CS6, and I have several XML files with the same structure. Only the data are different.
I created an Indesign layout with some tagged placeholder frames on merge mode, for automated layout.
Today for each XML file I have to create a new InDesign document to import the XML. Everything works fine. Then in order to have all Indesign layouts one after the other into a single Indesign layout, I have to use the copy/paste function.
I mean for example, copy the contents of all documents to the first one. Or add pages of other documents to the first one, then delete spaces between each page.
So my question is the following:
How to repeat this process without copy/paste function, knowing that the
number of XML files could be unknown.
Thank you very much for your answer.

Yes, effectively I would like to catalogue the files into one collection so i can save as one PDF and Print as one.:)
I know I could save each AI as a pdf them then merge the pdf's together in acrobat, but I have nearly 100 files so would feel more comfortable seeing them all together before print / saving.
My concern is that if I insert them in Ai, will the file resolution reduce? and will the ai still be editable and would it update the indesign file?
Thanks for the quick reply

I have all my movies on an external hard drive. I want to be able to access them without copying everything to my iTunes. How can I do this?

I have all my movies on an external hard drive. I want to be able to access them without copying everything to my iTunes. How can I do this?

I think DebinSC might mean using the movies without copying to the iTunes library?
Maybe the solution is to uncheck this box?
Or am I barking up the wrong tree?

Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original?

Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original? The cut and paste function is not available and there's no "move to" function. Am I missing something? It was so easy with Windows.

Drag the files, or press Option when pasting them; this accesses the Move To function.
(124070)

Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
cheers
jadidev

Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
Yes, if you have an Apple router.
No, if you have a BT router.
IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

G/L account item without tax code in document with deferred taxes

Hi ,
While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
Please guide what could be the problem in the Discount Condition?
Thanks and Best Regards

whats this Z condition type. Is it a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check whats the GL Account assigned to this Account key (VKOA).
Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
Hope this helps
Regards
Sai

Creation of condition table without copy

During creation of Condition table ( without copying any condition from available tables), Is it possible to see all field catalouges available? and if possible then how can we see all fields available to add desired ones into our table?

Hi,
SPRO >Sales and Distribution->Basic Functions>Pricing>Pricing Control-->Define Condition Tables
In the above menu path you can find out the Field catalog what SAP has given if you want to add new field you can add provided
If you done the Enhancements
Regards,
Prasanna

I forgot my restriction code on my iPod 4th Gen, and I dont have the same computer to do a reset. I have a new computer. How do I reset it without this code?

I am selling my iPod touch, but I forgot the Restriction Code so I can't reset it and I have a new computer, so all of my Apple stuff isn't there anyway. that is one of the main reason I wanted to sell my iPod because when I got a new computer I lost everything. But now I cant reset it without this code and I don't know what to do. Is there a way I can reset it without the code on my new computer?

http://support.apple.com/kb/HT1212

Clearing customer down payment without VAT code

Dear Freinds
For normal cleared items ( between invoices and incoming payments) the VAT code doen't appear.
But while clearing a Customer Down payment request, when we are using a sp. GL Indicator it is asking for tax code
I want to clear customer down payment without tax code.According to the local legal requirement in the VAT report should not appear any clearing with tax code even if Tax code has no tax.
Can anybody help me?? I tried changing the tax category of Sp. Gl Recon account to blank but then it doesn't allow to post a down payment request with tax applicable.
Rgds
Sudip

Hi Ravindra
If we remove the tax category, then the problem is when we create a down payment request and do billing where tax rate is applicable, Entry will not happen in Accounting.
Only thing which I need is that at time of clearing the down payment request, putting tax code should not be mandatory.Just like when I am clearing a normal invoice (Inv. and incoming payment) no tax code is required.
Rgds

Half Period shifted Signal without copying code?

Similar Messages

Maybe you are looking for