Half Rack exadata with DBFS_DG having normal redundancy ?

My understanding was that the one command installation scripts automatically set the redundancy level for the DBFS_DG diskgroup.I believe I had actually foud this in the onecommand code in gridsteps.pm function CreateASMDiskgroups() . For eighth and quarter racks it is Normal and for half and full it is high. This is to ensure that the critical OCR and vote files are safeguarded to the maximum extent possible. However recently I came across several half rack installations with the DBFS_DG redundancy as normal. Is there any way to override this or does this mean that the grid software was manually reinstalled at some point ?
This is on x2-2 half racks. Appreciate it if anyone know whether there is any way this might have happened through a standard onecommand implementation.

onecommand will create DBFS_DG in normal redundancy every time.  If you're on a half or full rack with a high redundancy diskgroup, it will relocate the OCR and voting files to that diskgroup.  This happens in the CreateASMDiskgroups step of onecommand.

Similar Messages

  • My iPhone 4s battery lasts me about half a day with just light normal use. I can watch my battery drain just looking at the home screen. I made sure all my settings were right and everything. I'm very annoyed!

    I can watch my battery drain 1 percent every 3 minutes with it just sitting on the home screen. I've adjusted all the settings location, brightness wifi ect. I am very annoyed!

    I can watch my battery drain 1 percent every 3 minutes with it just sitting on the home screen. I've adjusted all the settings location, brightness wifi ect. I am very annoyed!

  • After screen replacement, top half of screen starts by looking normal but then fades to black while bottom half stays bright but with images blury. What might went wrong?

    A friend recently gave me their old Macbook pro 15 because they broke the screen and the Apple store quoted them $500-600 to fix it. I looked online and bought a screen of ebay for $170 in hopes of fixing it myself. After getting the screen I hooked it up using the steps I found online. Sadly when I turned it on, the top half of the screen was working apparently normally, but then it faded to black. The bottom half stayed bright with color the whole time but the images were always blurred. When I close the screen with it on, then open it after turning the computer on, the top half lights up with my desktop images as if it is working fine but then fades to black. The bottom is still blurred the whole time. What all could be wrong? Display cable, Inverter cable, not registering the screen or something, the screen is bad? I don't now a ton about all this and I have learned most of what I know from online research. I am not sure if I should send the screen back or if there is another issue. I just want to fix this thing.

    Unfortunately, you don't even know the lower half of the computer is working properly, because you didn't have it until after it had been abused. So forget the attached screen for the moment. Connect an external monitor to it, fire it up, and see whether you can get a usable image on the external screen. If you can, send the defective "new" screen back for a refund, or replace the LVDS video cable first to make sure that's not where the problem lies, and if it isn't, then resort to sending the screen back. If you can't get a good image on the external, give the junk machine back to your friend and walk away.

  • What is the usable space of normal redundancy disk group with two uneven capacity fail groups

    Hi,
    I have a normal redundancy disk group (DATA) with two uneven capacity fail groups (FG1 and FG2). FG1 size is 10GB and FG2 size is 100GB.
    In this case what will be the usable space of the disk group (DATA)? is it 10G or 55G?
    Thanks,
    Mahi

    Please, don't duplicate post with same matter.
    This question was answered in your previous thread.
    Re: ASM normal redundancy disk group

  • Is this normal in 'Normal Redundancy' ?

    GI version: 11.2.0.4 (3-Node RAC)
    OS : Oracle Linux 6.4
    Storage from EMC Symmetrix VMAX
    I created a diskgroup with normal redundancy as shown below.
    10 LUNs of 500GB each = 5000GB
    CREATE DISKGROUP DATA_DG1
    NORMAL REDUNDANCY
    DISK
    'ORCL:DATA_D1',
    'ORCL:DATA_D2',
    'ORCL:DATA_D3',
    'ORCL:DATA_D4',
    'ORCL:DATA_D5',
    'ORCL:DATA_D6',
    'ORCL:DATA_D7',
    'ORCL:DATA_D8',
    'ORCL:DATA_D9',
    'ORCL:DATA_D10'
    ATTRIBUTE 'au_size' = '4M';
    Diskgroup created.
    Since it was normal I was expecting half of the Raw space 5000GB = 2.5 Terabyte of usable space. But, the below query output shows I got only 2.19 TeraBytes of Usable space (2249.86 GB). Around 250GB short of what I was expecting.So, where is my 250GB gone ?
    SQL> select name, TYPE, TOTAL_MB/1024/1024, FREE_MB/1024/1024, USABLE_FILE_MB/1024/1024 from v$asm_diskgroup where name = 'DATA_DG1';
    NAME                           TYPE   TOTAL_MB/1024/1024 FREE_MB/1024/1024 USABLE_FILE_MB/1024/1024
    DATA_DG1                       NORMAL          4.8828125         4.8825531               2.19713593

    The amount of usable file space is equal to the amount of free disk space subtracted by the amount of disk space that is required to restore redundancy after a failure divided by the redundancy level of the disk group which is two in your case.
    Run:
    select trunc((free_mb - required_mirror_free_mb) / 2) as useable from v$asm_diskgroup where name='DATA_DG1';
    Source: http://prutser.wordpress.com/2013/01/03/demystifying-asm-required_mirror_free_mb-and-usable_file_mb/

  • ASM normal redundancy disk group

    Hi,
    One of my collegues created an ASM disk group with normal redundancy using 2 disks. But the disks are not of same size, one disk is 100GB and another one is 10GB.
    Now the usable space out of diskgroup is showing 55GB. When I checked the diskgroup properties it is showing 2 fail groups one is DATA1_0000 with 10GB and other is DATA_0001 with 100GB.
    My question is why it is showing 55GB as usable space?
    My assumption is as it is having 2 fail groups with different disks of different sizes. For the failgroup 2 even it is of 100GB size, in order to maintain the redundancy with other small FG(10G) it will consider only 10GB out of 100GB.
    So, the 2nd FG size also should be 10GB. So that the usable space should show as 10GB as opposed to 55GB (not (100+10)/2).
    Please clarify me.
    Thanks,
    Mahi

    Hi,
    Please see the below output, I am talking about DATA1 disk group with number 2.
    SQL> select group_number,name, type,total_mb, free_mb, required_mirror_free_mb, usable_file_mb from v$asm_diskgroup;
    GROUP_NUMBER NAME                           TYPE     TOTAL_MB    FREE_MB
    REQUIRED_MIRROR_FREE_MB USABLE_FILE_MB
               1 DATA                           NORMAL       6144       5344
                       2048           1648
               2 DATA1                          NORMAL     112640     108604
    SQL> select group_number, name, mount_status, state, redundancy,  failgroup, failgroup_type, os_mb, total_mb, free_mb from v$asm_disk;
    GROUP_NUMBER NAME                           MOUNT_S STATE    REDUNDA
    FAILGROUP                      FAILGRO      OS_MB   TOTAL_MB    FREE_MB
               1 DATA_0000                      CACHED  NORMAL   UNKNOWN
    DATA_0000                      REGULAR       2048       2048       1781
               1 DATA_0001                      CACHED  NORMAL   UNKNOWN
    DATA_0001                      REGULAR       2048       2048       1782
               1 DATA_0002                      CACHED  NORMAL   UNKNOWN
    DATA_0002                      REGULAR       2048       2048       1781
    GROUP_NUMBER NAME                           MOUNT_S STATE    REDUNDA
    FAILGROUP                      FAILGRO      OS_MB   TOTAL_MB    FREE_MB
               2 DATA1_0000                     CACHED  NORMAL   UNKNOWN
    DATA1_0000                     REGULAR      10240      10240       8222
               2 DATA1_0001                     CACHED  NORMAL   UNKNOWN
    DATA1_0001                     REGULAR     102400     102400     100382
    Thanks,
    Mahipal

  • HT203585 a FaceTime half duplex issue with my Mac--OS 10.10.2

    I am having a half duplex problem with my Mac---OS 10.10.2
    That is, when the party I FaceTime with is talking, they  cannot hear me.
    I can hear then other party when we both talk---it happens whether or not
    I initiate the call or the other party does. It doesn't happen with my iPhone
    on the same home wifi network. And it happens on the Mac when
    the iPhone FaceTime is turned off too.

    You can use both.:)
    * getfirefox.com

  • OCR Disk - change from external to normal redundancy

    Hey, I am using grid 11.2.0.3
    I have one +OCR Disk in ASM configured. unfortunately with external redundancy.
    I have two storages - each storage is representing 2 disks á 500 MB
    But I think that my cluster will break down, in a case of a storage failure. Is that right ?
    Can I switch to normal redundancy ? If not, how to modify the configuration.
    I could create two new disks, and could create a new diskgroup for OCR. But how to switch ?
    Is it the ocrconfig replace command ? Or with a backup ?
    ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 3
    Total space (kbytes) : 262120
    Used space (kbytes) : 3032
    Available space (kbytes) : 259088
    ID : 419542868
    Device/File Name : +OCR
    Device/File integrity check succeeded
    Device/File not configured
    Device/File not configured
    Device/File not configured
    Device/File not configured
    Cluster registry integrity check succeeded
    Logical corruption check succeeded
    ocrconfig -showbackup
    2011/11/04 05:48:57 /crs/cdata/bfkoe/backup00.ocr
    2011/11/04 01:48:57 /crs/cdata/bfkoe/backup01.ocr
    2011/11/03 21:48:57 /crs/cdata/bfkoe/backup02.ocr
    2011/11/03 17:48:56 /crs/cdata/bfkoe/day.ocr
    2011/11/03 17:48:56 /crs/cdata/bfkoe/week.ocr
    PROT-25: Manual backups for the Oracle Cluster Registry are not available

    Christian wrote:
    Hi, would this the way to replace my diskgroup
    srvctl stop database -d <database>
    ocrconfig -manualbackup
    ocrconfig -showbackup manual
    crsctl stop crs [-f] on all nodes
    ocrconfig -delete +OCR
    #Remove ASM Diskgroup
    oracleasm deletedisk OCR1
    oracleasm deletedisk OCR2
    oracleasm deletedisk OCR3
    oracleasm deletedisk OCR4
    #Remove ASM Header
    dd if=/dev/zero of=/dev/mapper/vot1_agg01_part1 bs=1024k count=200
    dd if=/dev/zero of=/dev/mapper/vot3_agg01_part1 bs=1024k count=200
    dd if=/dev/zero of=/dev/mapper/vot2_agg02_part1 bs=1024k count=200
    dd if=/dev/zero of=/dev/mapper/vot4_agg02_part1 bs=1024k count=200
    #Re-Create ASM Diskgroup
    oracleasm createdisk OCR1 /dev/mapper/vot1_agg01_part1
    oracleasm createdisk OCR2 /dev/mapper/vot3_agg01_part1
    oracleasm createdisk OCR3 /dev/mapper/vot2_agg02_part1
    oracleasm createdisk OCR4 /dev/mapper/vot4_agg02_part1
    Recreate +OCR Diskgroup via asmca with normal redundancy and mount diskgroup on all nodes
    ON node 1:
    crsctl start crs -excl -nocrs
    ocrconfig -add +OCR
    ocrconfig -restore <file_name>
    ocrcheck
    On node1:
    crsctl stop crs -f
    On node2:
    ocrconfig -repair -replace
    On node1+node2
    crsctl start crs
    cluvfy comp ocr -n all -verbose
    Does this look right ?
    Christian
    Looks complicated, I would suggest have a read http://download.oracle.com/docs/cd/E11882_01/rac.112/e16794/votocr.htm#CWADD91099
    Cheers

  • TS4268 I can't activate FaceTime & iMessage on my iPad ... Would this have anything to do with already having these set up on my iPhone with the same apple ID?

    I can't activate FaceTime &amp; iMessage on my iPad ... Would this have anything to do with already having these set up on my iPhone with the same apple ID?

    As long as you're logged into the same AppleID on both devices, this is not a problem.  It's only a problem if you're logged into a different AppleID and then try to associate FaceTime with an email that tied to the other AppleID.

  • Is there a way to remove many photos from the iPhone camera roll with out having to delete photos one by one?  I need space, it's so full and I've opted out of deleting them when I sync them to my computer in the past.

    Since I've transfered all my photos to my computer & added the files that I'd like on my phone in iTunes I'd like to delete the photos from my camera roll on my phone, but there are a lot and I'd like to be able to do it quickly.  Is it possible to do this with out having to put each on into the trash on my phone?

    *correction*
    Arrow in bottom left allows you to multi select. After you choose your photos, you can hit the delete button that appears in the bottom right hand corner. Or, you can hit the cancel button in the rop right and not delete them

  • I can not transfer my photo albums from my Ipad to my computer(Microsoft windows). I have spent some time arranging these albums into some order with each having it's own name.but when i transfer it to my computer  the photo's are out of order

    We have sorted our photo's into albums with each having their own headings on our Ipad. We have now downloaded these to our computer (Microsoft).The only problem is they did not save in the album order or have any reference to the name of the album. I was wondering if there is away to download our photo's by album from the ipad to a Microsoft computer or even to an extermal hard drive.

    First of all, you should always save you photos on computer like any other digital camera.
    Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
    Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
    What computer do you have?

  • How do I create an apple Id for iTunes with out having a credit card?

    ow do I create an apple Id for iTunes with out having a credit card? I have this but it says when i use it on itunes I have to show payment information i dont have a credit card and I dont have a itunes card right now.

    Click here for information.
    (80251)

  • TS1368 I keep getting this error message and can't open the iTunes store. I've reinstalled iT a half dozen times with no results. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing" reinstall iTunes

    I can't open the iTunes store and keep getting this error message. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing. Reinstall iTunes." I've reinstalled iT a half dozen times with no results.

    You might have two different things going on at once here.
    Starting with the registry settings message.
    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • HT1386 Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!

    Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!
    How is this possible? How can the iTunes eat what I bought and what for? To buy the applications again?! Geez!
    Tell me the solution. It must exist one!

    You can redownload you previously purchased apps for free as long as they are still available in the app store.  Be sure you are logged into the Apple ID in iTunes used to purchase them, then follow this guide: http://support.apple.com/kb/HT2519.

  • Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

    Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben  [email protected]

    Hello Trevor
    Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
    Ben

Maybe you are looking for