Halion Sonic software instruments in Logic Express

I'm having a problem getting my software instruments from Halion Sonic to show up in my library on Logic Express. Halion Sonic is validated through the AU Manager but will not show up in the library. Do I need to import them or something? I've been working on this for days with no luck. I've tried wrapping them with FXExpansion because they are VST instruments, but then why does it validate in AU Manager? I am lost and could use some advice. Thanks,

Okay, I've looked at some other forums and i'm getting answers to my question above. Thanks Dr. V for the direction.

Similar Messages

Can I use Mainstage software instruments in Logic Express 9?

I would like to add more software (MIDI) instruments to Logic Express 9. I understand Mainstage comes with what used to be called Jam Packs. Can I use those Mainstage software instruments in Logic Express 9? If not, where do i find additional software instruments?

All JamPacks: yes, no problem.
Actual instruments, effects, like Space Designer: no, they are part of the application code (MainStage or Logic Pro)

How can I add new software instruments to Logic Express?

I just got Logic Express 8 and was disappointed to see that there were not as many instruments available as I thought there were. Is there a way I can add additional software instruments to my library without having to spend 300 more dollars to get Logic Studio?

Hi,
the cheapest way would be to buy a specific sample library from a music store and import them into the EXS24 Sampler. There are also some free downloadable ones, but i think they are not very satifactory.
Maybe a Jam Pack would help, also. Don't have one myself, so this is a shot in the dark.
However, i would encourage you to think about logic pro. You don't only get the sound library, but some very useful tools and plugins that Express doesn't contain. If i had the money, i would instantly go for it.
Fox

Use exterior vst instruments in Logic Express 9

From my former PC I installed Cubase Essential5 onto my new iMac and I purchased Logic Express 9 as well. I am trying to find out wether I can use the HALionOne and Synth Prologue vst instruments in Logic Express and how I go about it. I did install a demo version of Musiclab's Realguitar and after checking the Audio Units Manager, installment I was able to open this under Exterior instruments. Does anybody have suggestions?
evert

Hi
Logic only supports Audio Unit plugins, not VST (or any other type). Install the correct type and you should be good to go.
CCT

Adding new samplers or instruments to Logic Express

I recently bought Logic express 9 and wanted to add a Moog software instrument to it. The description says copy the folder(that contains the with the esx and aiff files) into Library/application support/logic/sampler instruments.
I tried all sorts of different locations, but the instrument does not show up, I tried to put it into the garage band folders (application support/garageband etc etc) the same , the instrument does not appear in the program. Where can i find it, or how do I copy or install it? What do I do wrong!?

Hi,
you'll have to load the EXS Instrument into your EXS24 sampler. The EXS24 is the Instrument, and the .exs file shall tell it where to load the AIFF files. So, first open the exs24. You should find the instrument in the dropdown list.
Fox

How can i extend the library of software instruments in logic?

Hello!
I am working with logic express 8 and would like to assign software instruments such as clarinet and celli to the midi-files of my keyboard. Yesterday I couldn't find woodwind instruments in the library of logic so I started to download mainstage 2 - which seemed to extend the library of logic. But unfortunately some software instruments (for example cello...) disappeared and instead of extending my library in logic mainstage made it smaller... Can anybody help? And can someone tell my where do I get a clarinet and a cello? Thanks for your answers!
Yours Judith.
P.S.: I thought about maybe I have to upgrade my version of logic express to logic studio? How can I do this and do I have to pay the full prize of logic studio then? Sorry for my nescience! :-)

Hi..
Best place to get feedback for Logic Pro is the Logic Pro community.
Post your topic here.
That way you will receive feedback directly from LP users. This forum is for the most part, troubleshooting the App Store.

How to do multi-instrument with EXS instrument in Logic Express

Hello Logic Express Users,
I wonder if someone can help me. I can set up multi-instruments with Battery 2, and Kontakt 2, but I am battling to set up a multi-instrument when I am using the EXS with Logic Express. How do I assign the outputs to different outputs so that I can hear different instruments through different aux channels.
Or is it only possible with the EXS editor that comes with Logic Pro? Because if it is then it is weird why they make the EXS with Logic express a multi-instrument.
Thanks in advance for any help.

If you want to save an instrument patch together with plugins and so on, you should save it as a channel strip.
Use the channel strip menu at the top of the channel object. There is a defined directory for user channel strips, but you can create folders within it and organise your channel strip settings as you like.
These settings will show up in the channel strip menu, and the media browser too.

Unable to play External Midi Instruments in Logic Express

Hi,
I have a Yamaha Keyboard which is connected to my Mac via a usb midi cable (Edirol). I have installed the driver for the midi cable and have set it up properly in the "Audio Midi Setup".
However when I am using Logic Express, I just do not know where I can select the midi cable(Edirol) for my Midi In / Out put and as such, I am unable to play any sounds from my keyboard in Logic Express.
Is someone can advise me on this, would be most grateful.
Thanks in advance and cheers.

Hi
Thanks so much for your reply. I have done so for the setup, however when I am in Logic Express I am still unable to play sounds from my keyboard. The mac seems to be using sounds from the computer instead and I do not know where in Logic Express can i go to set it such that my keyboard sounds are used in stead, as i wish to assign channels to my various midi instruments so that they play the right sound from my keyboard.
Please help!! Thanks

Solo instruments in Logic Express (strings, horns)

Hello,
I have imported an audio track (mixdown of bass, drums, piano) into Logic Express. I would now like to make a string quartet arrangement over the track: solo violin, viola, cello. (Same for trumpet, trombone, saxes.) One track for each instrument. I can't find workable solo instruments in Logic.
I will be recording the actual parts with real instruments and don't need high-quality samples, so Garritan is probably way more than I need. This is strictly for arranging. As I understand, the available Jam Packs do not include solo strings.
Are there basic MIDI files on a Mac that could be used for this? Or some kind of plug-in? Alternatively, I do have Finale (2004 version, but I can upgrade). Will Finale parts work somehow with Logic Express?
Thanks.

Hello,
Thanks for your reply to my question about solo instrument MIDI tracks in Logic. Pop Strings in the EXS24 is what I have been using, and while there is a solo cello there, I don't see any solo violin options, pizz or arco. There's definitely no viola option. My workaround for now is to have four solo cello tracks, with the top two cello tracks serving as violin parts, the third as viola, and the fourth as cello. Seems kind of silly, but at least they are solo instrument tracks. The ensemble samples are useless for writing parts for actual instruments.
I'll try exporting a Finale arrangement as MIDI files, importing those into Logic Express, and see if that's better.

How do you arrange instruments in logic express?

Hi,
I am new to Logic Express 9. I have created an 8 bar song and I want to make it longer and arrange my track so I can remove and add sounds as the song goes along. For example Remove a piano at bar 4 and have a guitar playing at bar 8. How can I do this?
Thanks

Did you assign the delay on the vocal track's "Insert" button? If so, this could be the reason your vocals sound jumbled. You can always lower the "wet" signal in the delay itself, but I find that the following method works best when using reverb and/or delay:
1. From the Arrange window, select/click the vocal track you want to use delay on.
2. Looking at your track on the left hand side of the screen, right below "Sends," hold-click on the button and select Bus>Bus 1(or whichever one you want)
3. An "Aux" track will appear right next to your vocal track.
4. Load either delay or reverb on the inserts and choose the appropriate setting. I prefer using either Stereo or Tape delay since they have better options to work with.
5. On your vocal track, on your "Sends," you can turn up the volume right next to it, which controls how much of your vocal track you want to send to the aux to get that reverb/delay. Start with -10 db and work your way from there. You should notice a difference by then. You can also control the fader from the Aux as well.
As far as fadeouts are concerned, I haven't really figured that out. I normally fade out when I use a separate mastering suite, but you can also fade out manually using the Automation method on the Master fader.
Hope that helps.

How can I load a .pst file to an instrument in logic express 9?

I have some instruments plug-in settings from my old computer that I used with logic, and I want to load them into logic so I can use them on the computer I moved them to. On any instrument I try (ES1, ES2, EXS24 and the rest) it won't allow me to load the files (.pst files) and I know I should be able to. Am I just going about it wrong or using the wrong instrument? How can I load these files so that I can use the instruments again?

Pages is not in a format compatible for what you want to do.
After you save a a Pages document, go to File > Export > and choose either Word or Pdf format. You can also choose RTF or PlainText too. Then you can email to yourself or others.
Good Luck.
Adam

Using kontakt multi instrument in logic express

hi folks,
i am trying to load several instruments into a multi instrument in kontakt2. the documentation says that it is possible to use this to trigger each instrument from a different midi channel. i seem not being able to figure this out. the book "logic6 power" even mentions that you can assign regions to specific midi channels but it does not explain how.
basically, i would like to be able to switch between pre-loaded sounds within one track instead of having all of them sound like stacked.
can anybody help?

not quite sure what exactly did the trick, generating the multiinstrument in the environment and cabling it to the audio fader strip thingy in the mixer... but it works now. i guess it was crucial to come to the conclusion that a different midi channel on the masterkeyboard has to be chosen in order to get a different instrument to sound rather than trying to find a way to set the instrument somewhere in the track or in the region.
i guess, simply by talking about it the soution started the dawn on the horizon...
thanks!

Unable to hear and record software instruments

I can only hear and record my Korg TR Music Workstation instruments. How can I hear/record the software instruments (from Logic Express 9, Garage Band/Jam Packs)? I have my Korg connected to the computer through an M-Audio recording interface.

You can hear them by:
1. Making sure your midi input is functioning (see a little movement in the transport box)
2. Selecting a virtual instrument in the box just above the 'out' box above the track volume slider
3. Play the chosen instrument from midi keyboard, or draw a region, open, play vertical keyboard on Left side with mouse.
I hope you don't really try to record instruments in the Jam Packs because they're not instruments.
As far as I know , they're loops.

Can you import software instruments and plug-ins from Logic Pro to GB

Hello,
I purchased Logic 7 Pro and I find it to be way too much for me. Is there a way to take the software instruments from Logic to GB? I am not even sure Logic comes with more software instruments than GB. Do they both rely on the Jam Packs for additional instruments.
Is there anything else GB can borrow from Logic. I know I can move the sound effects aif files and use them. Just wondering about other plug-ins and the like.
Thanks!!
Mac OS X (10.4.6)

Here's how you get past the static interruption.
Make your software track and ignore the static interruption. Its not being recorded into the midi information.
Then export the track out and reimport it to a new track. Do this twice. Your export/import WILL have static in it but since it was random your two tracks will not have the static in identical places.
Edit out the static in track one by replacing it with a static-less portion from track two. You'll now have a complete loop with no static interruption.
xs4sis. The cool thing about the demos is you don't have to program anything just use the presets. Who CAN program those **** synths anyway?
There are some demos that have a hundred presets to them. I love that!

What must I do to play a software instrument from UltimateSoundBank with MIDI in Logic Pro?

What must I do to play a software instrument from UltimateSoundBank with MIDI in Logic Pro? I can´t find it in the Logic library.
I want to use the USB Instrument I have as a software instrument in Logic Pro 9.

Everyone reading your posts here is just another MacBook Pro user. We're all volunteers, not Apple employees. No one here can speak for Apple.
In my personal opinion, buying Apple products in a country where Apple has no stores and no corporate presence is a risk that the buyer takes knowingly. I don't think it's a wise risk, and I don't recommend that anyone take it. A small percentage of the products sold anywhere are going to have problems, and it makes more sense to buy an inferior product that can at least be serviced locally than to buy a superior product that may have to be sent thousands of miles for repair if anything ever goes wrong with it.

Halion Sonic software instruments in Logic Express

Similar Messages

Maybe you are looking for