Hallo, ich wollte auf eine eigene Partition von meinem mac noch windows installieren, doch jetzt komt beim starten immer nur: no bootable device -- insert boot disk and press any key. Was soll ich tun??? Oder woher bekomme ich so eine Boot disk?

Hi,
ich wollte auf meinen Imac noch zusätzlich Windows 7 installieren.
jetzt kommt aber wenn ich starte nur noch: No bootable device -- insert boot disk and press any key.
was soll ich jetzt tun?
Woher bekomme ich so eine Boot disk?
Gruß steini

Starte deinen iMac neu und halte dabei die Alt/Option-taste gedrückt bis der Start-Manager erscheint.
Wähle deine OSX-partition aus und dann Enter.
Nachdem OSX gestartet ist, gehe zu Systemeinstellungen dann Startvolume and setze dein OSX als Standard.
Wenn nötig öffne danach den BootCamp-Assistenten und lösche die Windows-partition.
Stefan

Similar Messages

  • I was using bootcamp assistant to install windows 7 via flash drive, i followed the steps, the Windows installation image was installed successfully and the boot camp partition was made andy mac restarted then i got this message "no bootable device insert

    "..no bootable device insert boot disk and press any key", i restarted my mac and held options and managed to log in to my OS x again but my windows wasn't installed and when i held options while my mac was starting the usb flash drive wasn't there, what should i do? Also can i restore my usb flash drive to use it as a regular flash drive again?

    Hi Michael!
    Yep, I did get this running. Not in a normal way (meaning the easy way). What I did, is that I just created the BOOTCAMP partition in OS X. Just let it format and create the partition where you would install BOOTCAMP.
    After that I discovered that via a ISO program (WinClone) you can directly restore a previously created OS X boot image to your current computer. So, I installed a blank Windows 7 to my macbook pro, didint install any drivers and just let it work up then. Then I went back to os X (in macbook pro) and made a bootimage for the BOOTCAMP partition. After that I saved it to my external harddrive and wired it to my iMac. In iMac I just downloaded the same boot-image program and restored the bootimage that I made in Macbook Pro to iMac. After that I made an restart and the bootcamp section with windows worked well with my iMac. Install the bootcamp soft and you can do everything and everything works. FYI, you get the windows working via those steps, BUT if you either delete or do anything to make your bootcamp partition unworkable then you will have to repeat those steps again. But it´s fast non-the-less, so it shouldn´t be a problem for you.
    If you didin´t understand anything or something doesen´t add up, send me a letter or a notification.
    Hope this helps.
    Indrek.

  • Woher bekomme ich eine Icloudversion für Windows Vista?

    Woher bekomme ich eine Icloud Version für Windows Vista?

    Starte deinen iMac neu und halte dabei die Alt/Option-taste gedrückt bis der Start-Manager erscheint.
    Wähle deine OSX-partition aus und dann Enter.
    Nachdem OSX gestartet ist, gehe zu Systemeinstellungen dann Startvolume and setze dein OSX als Standard.
    Wenn nötig öffne danach den BootCamp-Assistenten und lösche die Windows-partition.
    Stefan

  • Ich habe 3600 Bilder von meinem iphone in iphoto geladen hat alles geklappt jetz sind aber nur ca 400 zu sehen der rest ist verschwunden.... wenn ich das ihone wieder anschliese sag der rechner all fotos wären bereits importiert hat jemad eine Idee??

    ch habe 3600 Bilder von meinem iphone in iphoto geladen hat alles geklappt jetz sind aber nur ca 400 zu sehen der rest ist verschwunden.... wenn ich das ihone wieder anschliese sag der rechner all fotos wären bereits importiert hat jemad eine Idee??

    Rai,
    hast du nach dem Importieren die Bilder automatisch vom iPhone löschen lassen oder sind sie noch auf dem iPhone?
    Sollten die Bilder nicht mehr auf dem iPhone sein,  durchsuche alles in der iPhoto Mediathek. Eventuell sind die Photos im Papierkorb oder ausgeblendet. Aktiviere "Darstellung > Ausgeblendete Fotos".
    Ist die Mediathek groß? iPhoto zerlegt den Import automatisch in viele kleine Ereignisse. Manchmal sind diese einfach falsch einsortiert. Hast Du wirklich die Ereignisliste komplett durchsucht und nach Datum sortiert?
    Wenn sie noch auf dem iPhone sind, versuche den Download nochmals, aber diesmal mit ImageCapture.app (Digitale Bilder.app auf deutsch).  Verbinde das iPhone über USB, wie beim Import für iPhoto und starte  "Digitale Bilder". Das Iphone sollte in der Seitenleiste unter "Geräte" auftauchen.
    Wenn es ausgewählt wird, sollte eine Liste von Bildern erscheinen (dauert ein bisschen).
    Wähle die Bilder aus, die noch fehlen, wähle einen Ordner in der Fußleiste, und drücke den "Importieren" Knopf.
    Léonie

  • Kann ich über meine Apple-ID die Seriennummer von meinem Mac rausfinden?

    kann ich über meine Apple-ID die Seriennummer von meinem Mac rausfinden?

    Nein.  Hier ist wie mann kannst die Seriennumber finden:
    http://support.apple.com/kb/HT1349?viewlocale=de_DE

  • Ich habe alle Termine aus versehen von meinem iPhone gelöscht, wie stelle ich die ermine aus dem letzten Back-UP wieder her?

    Hallo Leute,
    ich habe aus versehen alle Termine von meinem iPhone gelöscht. Wie stelle ich die ermine aus dem Backup von gestern wieder her.
    Danke für eure Hilfe
    Gruß
    Zacky1590

    In diesem Fall müsstest Du das iPhone komplett zurücksetzen und vom Backup wiederherstellen lassen. Wenn Du das tun möchtest wähle Einstellungen > Allgmein > Zurücksetzen > Inhalte & Einstellungen löschen. Danach kannst Du, sobald das Gerät wieder startet, im Laufe der Geräteeinrichtung das Backup auswählen, aus dem dein iPhone wiederhergestellt werden soll.

  • Seit Installation des Mac OS X Lion können die Power PC Programme mit Word, Excelund Power Point nicht mehr geöffnet werden. Was ist zu tun?

    Seit Installation des Mac OS X Lion können die Power PC Programme mit Word, Excelund Power Point nicht mehr geöffnet werden. Was ist zu tun?

    Office 2004 wird nicht in der Lion laufen.
    Sie müssen Office 2008 oder höher.

  • Ich kann auf meine alten Daten von Time machine nicht zugreifen

    ich habe gestern meinen iMac 21,5" Ende 2013 mit Yosemite neu aufgesetzt!
    Dann will ich meine Programme und meine Daten einzeln wieder zurück spielen. Dabei habe ich dann festgestellt, das ich meine Daten sehr wohl im Finder sehen kann ab Mai 2014, aber bei Time Machine sehe ich rechts nur rote Balken sehe!
    Im Finder kann ich auch auf jedes Backup zugreifen aber das hilft leider nichts!
    Ich habe es auch mit dem Migrationsassistenten versucht, da sehe ich aber nur die neuen Backups von gestern an.
    Das kann doch nicht sein, das ich an meine Daten nicht mehr dran komme!?!?!?!
    Ich stöber schon das ganze Netz durch... aber nichts!
    Hoffentlich hat jemand eine Lösung für mich...
    Georg

    Darf ich vorschlagen, dass Sie entweder einen Übersetzer wie Google verwenden, oder posten Sie Ihre Fragen im Forum in Deutsch: http://forums.adobe.com/community/international_forums/deutsche

  • CSF Dateien für Adobe Bridge  - woher bekomme ich diese?

    Hallo zusammen,
    ich richte gerade meinen neuen Apple ein und stehe mit einem großen Fragezeichen vor der Farbeinstellung für die Adobe Bridge. Hierfür benötige ich CSF Dateien, aber wo bekomme ich diese her. Auf der ECI.org Seite kann ich leider nur die ICC Profile downloaden, aber die kann ich ja nicht in die Bridge laden.
    Wer kann mir da weiterhelfen?
    Lieben Gruß
    Frauke

    Die Idee hinter den CSF-Dateien ist wohl eher, ein ICC-Profil zu nehmen, zu laden, eventuell noch etwas anzupassen und das Ganze dann als CSF zu speichern. Diese kann man dann später wieder laden.
    Speichern kann man die CSF u. A. in Photoshop, im Farbeinstellungsdialog.
    wework | web and print solutions

  • Wird ein gesprungenes Display von meinem iPad 3 kostenlos repariert wenn ich AAP habe?

    Ich habe ein 2 Jahres APP und wollte wissen ob ein gesprungenes Display in meinem iPad 3 damit kostenlos repariert wird? Oder falls nicht, wieviel es dann sein würde und ob es Rabatt gibt?
    Vielen Dank :)

    Google translate.
    Ichich have a 2 year APP and wanted to know if a cracked screen on my iPad 3 will be repaired so free? Or if not, how much it would be, and whether it gives discount?
    Thank you
    The standard Apple Care warranty only covers defects in materials and workmanship, not damage due to accidents.
    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    USA Prices.
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • Ich habe meine Sicherheitsfragen vergessen, und um die zurückzusetzen brauche ich meine alte E-mail Adresse, doch ich hab kein Zugriff auf mein altes E-mail Konto. Und Apple sendet nur an meine alte E-mail, Nachrichten zum Zurücksetzen. Was soll ich tun?

    Ich habe meine Sicherheitsfragen vergessen, und um die zurückzusetzen brauche ich meine alte E-mail Adresse, doch ich hab kein Zugriff auf mein altes E-mail Konto. Und Apple sendet nur an meine alte E-mail, Nachrichten zum Zurücksetzen, obwohl ich schon neue E-mails hinzugefügt habe. Was soll ich tun?

    Sie müssen an Apple bitten, Ihre Sicherheitsfragen zurückgesetzt, Möglichkeiten der Kontaktaufnahme mit ihnen sind Sie hier klicken und Kommissionierung ein Verfahren für Ihr Land, telefonieren Applecare und bat um die Account-Sicherheit-Team, und das Ausfüllen und Absenden dieses Formulars.
    (97753)

  • Critical Kernel error while on windows partition, now neither mac or windows will boot help ?

    Hi I was on my windows side of my mac when i got the blue-screen-of-death with something saying Critical Kernel Error, weird noises from the speakers and the macbook pro did a hard shut off.
    Since then I can no longer boot into the mac or windows side (both are stuck infinitely loading). I ran disk utility on the mac side and I have an "Invalid Node Structure." Which disk utility cannot repair. I do have DiskWarrior on another mac to try and rebuild the mac partition through a firewire connection - i think that is the correct course of action ?
    But does this mean my windows partition is likely gone or any idea what went on ? As I am terribly confused that while on my windows side I had an error that messsed up both partitions.
    Or what to check for so this hopefully doesnt happen again if it is a hardware problem? My drive smart status is listed as "OK" and I cant seem to run the Apple Hardware test as upon attempting to get into it the laptop just shuts off while loading it, although I read somewhere the Apple Hardware test is no longer preloaded on macbook pros.
    The system in question is a 15" macbook pro bought around July 2011.
    Thank you,
    Wes

    Alright I have both my mac side and windows side repaired and functioning fine. Should I still be concerned ? Linc I know you are saying this is a drive malfunction but is there a way I can be sure ? I still cannot run AHT (restart, hold down D), and my laptop shipped with Lion installed so I believe it should run. It just boots into the mac side when I hold D..

  • I already partitioned my hdd via Bootcamp, supports downloaded, and windows is on an external USB. How can I start installing Windows now? at startup it doesnt show up as bootable device...

    hi,
    I am having a problem installing windows via bootcamp.
    I already partitioned my hdd via Bootcamp, downloaded and copied all the supports for windows, and windows is on an external USB as well. I had to stop the process the other day, so i shut down the computer. Now I am trying to boot from the USB, but I cant get to that point where the computer should restart and windows would start installing.
    . After restarting, holding command, it doesnt show up as bootable device.
    How shall I move forward? My disk is already partitioned, and if i start the whole process from the beginning, it wants me to partition again - although I already made a 100GB partition for windows.
    Please help me out.
    best,
    Zoltan

    So, here is what happened when I tried to make it.(sorry for quality, i had to take them by phone)
    At first when I opened it I saw that I could simply resolve it just by stretching the arrow at the bottom, giving the 100 GB back which I partitioned before via Bootcamp. At this point options was not available.
    I didnt do it because you mentioned earlier that it might be not designed to install windows.
    The second thing I tried I choose 1 Partition from Partition Layout. This time Options were available but I didnt see anything like GPT, the onces that are optionable are on the screenshot.
    What do you think how shall I move on? I was thinking to give it a shot with option 1, just stretch it back and try everything from scratch.

  • Boot Camp partition moved to external:"No bootable device found"

    I have just installed a new SSD, moved my old OSX partition to the new drive and am currently using the old hdd in an enclosure as an external hard drive.
    I can access all my files on my old OSX partition and my bootcamp partition when connected to my laptop. However, when i try to boot from my old bootcamp partition i get the "No bootable device found -- insert boot disk and press any key" message. That is when i boot from Startup Disk and target the bootcamp partion.
    When restarting my computer with the external harddrive connected and pressing the option key i only get "SSD" and "Recovery" as options, it does not recognize the external harddrive as a startup option at all.
    Is there anything i can do to use my old boot camp partition again? It worked perfectly fine before being external to the computer.
    My computer is a 2011 mbp with Mavericks, my boot camp patition is installed with windows 7.

    Microsoft requires that the partition for Windows be on an internal disk. It will not see an external drive as bootable.
    Allan

  • Boot Camp "No Bootable Device" after OSX Partition Resize

    I have a MacBook Mid/Late 2007. I started out with a 500GB drive that I partitioned 100GB for Windows 8 in Boot Camp (yes, I know only 7 is officially supported, not the point as it worked fine.) I wanted to try Mavericks so I resized my OSX partition down 100GB to make a new 100GB Mavericks partition. After I installed it and played around, I noticed when I booted with the option key, my Boot Camp partition was missing. I thought i was becaus eI had too many partitions, so I deleted Mavericks and resized my main OSX back to where it was when I started. The Boot Camp partition still won't show up when I hold option on boot, but when I run Boot Camp manager on OSX it wants to remove it, so it knows it's there. It also shows up in the startup disks pane, but if I select it and reboot, I get a "No Bootable Device -- insert boot disk and press any key" message. If there a way to bring back Windows?
    Here's the kicker: My optical drive DOES NOT work. I installed Windows 7 off DVD long ago before it quit working and the only way I got Windows 8 on was through a downloaded upgrade. I know I should get it fixed, but I don't have the money (and I never use it, and this is 2 that have died on me in this laptop.) My system can't boot anything other than OSX off flash drives or external DVD drives (I tried, and I tried reEFIt, neither worked.) So I need a solution that doens't require a boot CD if at all possible.

    Nhammake wrote:
    I can get to  and boot OSX (it's what I'm using now as this is my only laptop), I just can't boot Windows. All my files show up fine on both partitions.
    You can't add/remove or alter the partitions if Boot Camp is installed, Windows will cease to boot.
    To fix it, erase all paritions except OSX. Start over, 2 partitions only (OSX and Boot Camp)

Maybe you are looking for

  • Warning about low disk space on drive E

    Hi, I'm running Windows 7 on a HP Pavilion Elite HPE. My main drive i s C and there is also D (Factory image) and then the HP(E: ) one which is giving the warning about low disk space. When I look at what there is in drive E there is a folder called

  • Jetpack890L is up and running but still no internet

    I work Chelsea Manhattan and we lost both our phone and internet when Sandy rolled through. Verizon sent us a Jetpack 890L to connect to EuFI890 (that's what the sticker says) to help us get back online, but it simply doesn't work. Maybe we're doing

  • Problems generating stub classes

    When I use the EJB deployer tool I do not get any stub classes in the resulting EJB jar file. No errors are generated and the deployment to the WLS works fine but when I try to access the bean from a client the initial context lookup method throws an

  • How to create an animation with Image Sequence?

    Im have Quicktime Pro and I want to make an animation. I tried selecting some pictures I have saved "random," but I could only select 1 at a time. So, Im thinking that making an Image Sequence is a separate operation from making it come alive? My que

  • BEx Query-Problem opening query showing restricted key figure is inactive

    Hi  all, While activating the Query we are getting error , the object is missing in active version  ? And also it is not allowing to open the query  how  to activate the query element now? Also restricted key figure is inactive and how to activate th