Halt code 77749538
bios password g6 pavilion halt code:77749538
This question was solved.
View Solution.
Hi,
Enter: 68621518
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
Bios Password for Pavilion G6-Halt code 87057274
Help!
Hi, See your earlier post on the link below. http://h30434.www3.hp.com/t5/Notebook-Recovery/Halt-code-77749538/m-p/4178402/highlight/false#M55511 DP-K
-
Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Sof... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.receive halt code on 93296280 startup
-
Need bios pwd reset for pavilion 15-n013dx win8 halt-code 65925557
need bios pwd reset for pavilion 15-n013dx win8 serl# [Edited for Personal Information] halt-code 65925557
An aquaintance used the laptop and set the bios password. I see you have a way to run the halt-code towards an access-code. It's an allmost new PC and I would rather not take it apart looking for the reset pins.
This question was solved.
View Solution.Nfd try.
70683599
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
pavilion G6 power on password forgotten by my friend, just trying to help her. halt code 66158175
This question was solved.
View Solution.Hi,
Try entering: 79830171
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Halt code recovery - lost bios password
Hi;
I lost the bios password for my Pavillion G6 and it gives me a halt code of 54235907... any ideas
Thanks
HeikoTry>> 41193329
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
I am trying to get into my BIOs and dont remember the password since its been about 2years since I've look through the manuel and I am receiving the Halt code 95402496.
This question was solved.
View Solution.Hi,
Enter: 20560418
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
my wife forgot her bios password, and she can not remember the password
so she need to have her laptop bios password unlocked
Here the Bios Halt Code: 65910513
This question was solved.
View Solution.Hi,
Enter: 70678535
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
GT70-0NC BIOS halt code?
Occasionally my GT70-0NC will halt at the BIOS boot screen.It displays '99' in the lower right corner,I assume that is a code for why it halted? A re-start always cures this,I was just curious if anyone has a list of these codes.
Also,I tend to use my machine as a base unit,that is it has a monitor,mouse,keyboard,joystick and at least 1 external drive always connected.I also connect my tablet at times. Is this ok to do this,can it handle all these extra devices ok?
Quote from: Lister of Smeg on 12-January-15, 18:53:20
I'm pretty sure it's on the latest BIOS. I did think about unplugging everything but as it only happens infrequently it may take ages to verify. Also,sometimes the external keyboard won't work. Once again a re-boot cures the problem. This is my second MSI gaming notebook,my first died under warranty and that also had the annoying habit of hanging on boot-up,although that one never even made it to the BIOS screen. I'm going back to a desktop this year and this will be relegated to light duties.
I did search for those codes but only found ones for mainboards.I'll have a another look.Thanks for your help
Looks like it is the USB causes the trouble. Try not to connect any devices via your USB ports during POST. -
Halt code execution while awaiting a return value - like JOptionPane..
I've been struggling with a minor annoying problem...
I want to achive kindda the same thing as what happens when you call: String s = JOptionPane.showInputDialog(...);
The code execution locks until a value is returned, and this is exactly what I want to be able to do with my own custom dialog/frame/whatever.
Obviously, wait() and notify() on the calling thread won't work, so how can I achieve this optionpane gui-code-locking behaviour with my own custom gui components?
Thx in advance !From JInternalFrame source:
* Creates a new <code>EventDispatchThread</code> to dispatch events
* from. This method returns when <code>stopModal</code> is invoked.
synchronized void startModal() {
/* Since all input will be blocked until this dialog is dismissed,
* make sure its parent containers are visible first (this component
* is tested below). This is necessary for JApplets, because
* because an applet normally isn't made visible until after its
* start() method returns -- if this method is called from start(),
* the applet will appear to hang while an invisible modal frame
* waits for input.
if (isVisible() && !isShowing()) {
Container parent = this.getParent();
while (parent != null) {
if (parent.isVisible() == false) {
parent.setVisible(true);
parent = parent.getParent();
try {
if (SwingUtilities.isEventDispatchThread()) {
EventQueue theQueue = getToolkit().getSystemEventQueue();
while (isVisible()) {
// This is essentially the body of EventDispatchThread
AWTEvent event = theQueue.getNextEvent();
Object src = event.getSource();
// can't call theQueue.dispatchEvent, so I pasted its body here
if (event instanceof ActiveEvent) {
((ActiveEvent) event).dispatch();
} else if (src instanceof Component) {
((Component) src).dispatchEvent(event);
} else if (src instanceof MenuComponent) {
((MenuComponent) src).dispatchEvent(event);
} else {
System.err.println("unable to dispatch event: " + event);
} else
while (isVisible())
wait();
} catch(InterruptedException e){}
* Stops the event dispatching loop created by a previous call to
* <code>startModal</code>.
synchronized void stopModal() {
notifyAll();
}It basically works like this:
If this thread is not the EventDispatcher, then just use wait() and notify().
If it is the EventDispatcher...the process the events from here while we wait for the dialog to close. Seems kind of dirty, but it works. -
I forget the administrator password halt code received is 58578034
I forget the administrator password and after three attempts I received this code 58578034
This question was solved.
View Solution.Hi,
Please try:
47450010
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
its asking admin password to edit the boot option please help me
error code is 59008876
This question was solved.
View Solution.Hi,
Enter: 46960278
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Help, PLEASE! I never needed to put an bios password and suddently it asked for it, "System disabled" with a code below it: 75596040. What can I do? Thanks in advance!
This question was solved.
View Solution.Hi,
Please try:
60494086
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Halt code after entering 3 times
am using hp pavilion g6 and i got a system disabled code after entering administrator password or power on password 3 timesThe code I get is 71217365Please help me out
Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column. -
BIOS Password Halt Code - 67672452
Just tried to turn my HP Pavilion HDX16 on, and got hit with the power on password message. Please help.
Thanks,
Mark
This question was solved.
View Solution.Hi,
Please try:
78750494
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
After updating to ios 7, I have tried to update my apps and I can't. I press update and put my password in, the blue circle goes round, but in a few seconds, it stops and acts as if nothing happened in the first place. Please help, as I can't play a
-
New wiki page, please contribute - Gnome 2.28 Changes
I put together a wiki page that attempts to capture various changes/tweaks relating to Gnome 2.28. It is very sparse right now so please have a look and contribute. Hopefully, it will serve as a relevant source of info for users as we switch from 2
-
When I'm connected to wifi and try viewing a video, it says my server is incorrectly configured. When I turn off wifi and connect using 3G, it works fine. I'm wondering what settings on my router (Novatel MiFi 2200 through verizon)would I have to con
-
Playing Clips/Sequences in background, while using other application?
I am working for a reality TV show and we are trying to take notes in Microsoft Word while the editors sequences are playing. Is there any way to change the preferences so that Final Cut will play a clip or a sequence while we are using another appli
-
Please help with creating a summary report from data collected in a fillable PDF form.
I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in