Hamachi is stuck on services as stopping
i cant get hamachi to work and i have uninstalled it and installed it again it still doesn't work.i went on services and the service say that the status say its stuck on stopping so i uninstalled it and the service says that its still there stuck on stopping
Hi,
This is Windows 8 and Windows 8.1 issue forum. For other third-party product, please contact the software vender to ask the professional help.
Karen Hu
TechNet Community Support
Similar Messages
-
MobileMe Services has stopped working
I recently updated iTunes and downloaded iCloud on my PC (with Vista 32-bit), since I use an iPhone and an iPad. Since then, each time I turn on Outlook 2003, a message comes on twice that says: "MobileMe Services has stopped working." I know many people have had this problem and some were able to address it by either repairing or removing MobileMe or re-installing iTunes. However, for some reason, when I go to Programs and Features, highlight iCloud or MobileMe Control Panel to uninstall, change, or repair them, the options "uninstall," "change," or "repair" do not appear. These options appear for other softwares but not for iCloud or MobileMe Control Panel. As a result, I am unable to do anything to these programs.
I also followed the suggestion to remove the "COM add-in" for iTunes in Outlook but noticed it was not even enabled. Nevertheless, I removed it completely; however, the problem persists. Outlook takes a few minutes to come on following the appearance of the same message twice. I also noticed (after the download) that iCloud does not support Outlook 2003. I would like to uninstall it but do not know how to do so. Any suggestion?MobileMe was discontinued at the end of June 2012. The control panel should be removed if still present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
Alternatively the Microsoft Program Install and Uninstall Utility (AKA MS Installer "Fixit") may help remove the component completely.
tt2 -
Apple mobile device service has stopped working - continues
Hi
I have a 16GB iPhone with 02 in the UK.
My first iPhone with 02 had trouble receiving calls with about 90% of incoming calls going straight to voice mail. I also couldn't backup that phone as every time I tried with iTunes, i got the message "Apple mobile device service has stopped working" about a minute into backup.
This happened continually, I re-installed iTunes so many times, still with little luck. I tried a different cable too. All on a brand new Dell Vostro desktop PC.
So, I took the phone back to 02 with these problems. 02 promptly replaced my iPhone.
Now, I have exactly the same problem. I obviously have nothing to restore on the iPhone as I was never able to back it up in the first place.
Every time I try and backup the iPhone I get the error "Apple mobile device service has stopped working". Again i tried a different cable and have removed and re-installed iTunes several times.
Anyone any ideas?
Regards
DI was having this same problem with my new iPad 3G. It was driving me insane and preventing me from syncing the iPad.
I removed and re-installed all Apple components from my computer as recommended (in the recommended order). But, the problem persisted.
The error message looked just like the one posted above:
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
The SOLUTION came when i discovered that there were two copies of CoreFoundation.dll on my computer.
One was in C:\Program Files\Common Files\Apple\Apple Application Support.
The other was in C:\Program Files\Common Files\Apple\Mobile Device Support.
I removed the copy of CoreFoundation.dll from the Mobile Device Support folder, and the problem vanished.
I hope this helps.
-Steven. -
well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
ipod touch 2nd gen
http://gyazo.com/57a6260ece61212ba210bfe5659e399b.pngTry this:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful. -
I recently started to get an error message "MobileMe Services have stopped working". I use Vista. If I remove the MobileMe program, will it affect syncing with my iPhone or with Google Calendar?
No, just uninstall the MobileMe control panel. All Mobileme services have been discontinued, so the control panel is not doing you any good being in there at present.
-
I keep getting a popup that says"host process for window services has stopped"
hp s5220f
microsoft windows 7 home premium edeition (64 bit)
I keep getting a popup window that says "host process for window services has stopped"
How can I get rid of this?Hello tribefanz,
Sounds like a compatiblity issue with a program and Windows 7. We need to find out what program is causing the issue though. We can do that through event viewer
1. Click the start orb
2. Select Control Panel
3. System and Security
4. Under Administrative Tools select the Event Viewer
In the event viewer you will want to drill down into the Application and System logs and look for anything with a Red X that says Error. Identify the program causing the problem and then we can go from there.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
Mail Service Keeps Stopping For No Reason
Hi There everyone. Over the past few days my Mail Service keeps stopping. Not giving any particular error, the only clue is this log message:-
Jan 6 13:12:39 server master[371]: exiting on SIGTERM/SIGINT
Is that helpful? I can start the service again and it seems OK... for a few hours then it stops again.
I have tried, reconstructing and repairing until I am blue in the face. Any other suggestions please? Thanks in advance.I have just had the same thing happend again today with this in the log file:-
Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
Jan 12 08:52:53 server imap[1413]: accepted connection
Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
Jan 12 08:52:53: --- last message repeated 2 times ---
Jan 12 08:52:53 server imap[1413]: SQUAT failed to open index file
Jan 12 08:52:53 server imap[1413]: SQUAT failed
Jan 12 08:53:07 server master[367]: process 1399 exited, status 0
Jan 12 08:54:21 server master[367]: process 1413 exited, status 0
Jan 12 09:02:07 server master[51]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:02:07 server master[51]: process started
Jan 12 09:02:08 server master[177]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:02:12 server ctl_cyrusdb[177]: verifying cyrus databases
Jan 12 09:02:14 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 2 seconds
Jan 12 09:02:16 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 2 seconds
Jan 12 09:02:28 server master[261]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:02:29 server master[261]: process started
Jan 12 09:02:29 server master[262]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:03:42 server master[335]: process started
Jan 12 09:03:42 server master[337]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:04:00 server ctl_cyrusdb[337]: DBERROR db4: unable to join the environment
Jan 12 09:04:15 server ctl_cyrusdb[337]: verifying cyrus databases
Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 1 second
Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
Jan 12 09:04:41 server master[352]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:04:41 server master[352]: process started
Jan 12 09:04:41 server master[354]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:04:51 server ctl_cyrusdb[354]: verifying cyrus databases
Jan 12 09:04:51 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
Jan 12 09:04:52 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
Jan 12 09:05:17 server master[387]: process started
Jan 12 09:05:27 server master[447]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:05:27 server master[447]: process started
Jan 12 09:05:27 server master[448]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:05:41 server master[451]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:05:41 server master[451]: process started
Jan 12 09:05:41 server master[452]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:05:59 server ctl_cyrusdb[452]: DBERROR db4: unable to join the environment
Jan 12 09:06:01 server ctl_cyrusdb[452]: verifying cyrus databases
Jan 12 09:06:01 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
Jan 12 09:06:02 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
Jan 12 09:06:21 server master[479]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:06:21 server master[479]: process started
Jan 12 09:06:21 server master[480]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:06:31 server master[481]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:06:42 server master[483]: getrlimit: max processes limit set to cur=2068 max=2068
Jan 12 09:06:43 server master[483]: process started
Jan 12 09:07:01 server ctl_cyrusdb[485]: DBERROR db4: unable to join the environment
Jan 12 09:07:02 server ctl_cyrusdb[485]: verifying cyrus databases
Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
Jan 12 09:07:28 server ctl_cyrusdb[485]: done verifying cyrus databases
Jan 12 09:07:28 server master[497]: about to exec /usr/bin/cyrus/bin/idled
Jan 12 09:07:29 server master[483]: Cyrus POP/IMAP Server v2.3.8 ready for work
Jan 12 09:07:29 server master[499]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
Jan 12 09:07:29 server ctl_cyrusdb[499]: checkpointing cyrus databases
Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/annotations.db
Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/mailboxes.db
Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
Jan 12 09:07:29: --- last message repeated 1 time ---
Jan 12 09:07:29 server ctl_cyrusdb[499]: done checkpointing cyrus databases
Jan 12 09:07:29 server master[483]: process 499 exited, status 0
Jan 12 09:08:16 server master[512]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:16 server imap[512]: executed
Jan 12 09:08:16 server imap[512]: accepted connection
Jan 12 09:08:16 server master[513]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:16 server imap[513]: executed
Jan 12 09:08:16 server imap[513]: accepted connection
Jan 12 09:08:17 server imap[512]: login: [172.16.1.99] paul plaintext user logged in
Jan 12 09:08:17 server imap[512]: quota set to "unlimited" for mailbox user.paul
Jan 12 09:08:17 server master[514]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:17 server imap[513]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
Jan 12 09:08:17 server imap[513]: quota set to "unlimited" for mailbox user.florensis
Jan 12 09:08:17 server master[515]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:17 server imap[515]: executed
Jan 12 09:08:17 server imap[515]: accepted connection
Jan 12 09:08:17 server master[516]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:17 server imap[516]: executed
Jan 12 09:08:17 server imap[516]: accepted connection
Jan 12 09:08:17 server imap[516]: login: [172.16.1.99] paul plaintext user logged in
Jan 12 09:08:17 server imap[516]: quota set to "unlimited" for mailbox user.paul
Jan 12 09:08:17 server imap[515]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
Jan 12 09:08:17 server imap[515]: quota set to "unlimited" for mailbox user.florensis
Jan 12 09:08:17 server imap[516]: seen_db: user paul opened /var/imap/user/p/paul.seen
Jan 12 09:08:17 server imap[516]: open: user paul opened Junk
Jan 12 09:08:17 server imap[515]: skiplist: recovered /var/imap/user/f/florensis.seen (7 records, 14904 bytes) in 0 seconds
Jan 12 09:08:17 server imap[515]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
Jan 12 09:08:17 server imap[516]: SQUAT failed to open index file
Jan 12 09:08:17 server imap[515]: open: user florensis opened INBOX
Jan 12 09:08:17 server imap[516]: SQUAT failed
Jan 12 09:08:18 server master[517]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:18 server imap[517]: executed
Jan 12 09:08:18 server imap[517]: accepted connection
Jan 12 09:08:18 server imap[517]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
Jan 12 09:08:18 server imap[517]: quota set to "unlimited" for mailbox user.florensis
Jan 12 09:08:18 server master[518]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:18 server imap[518]: executed
Jan 12 09:08:18 server imap[519]: executed
Jan 12 09:08:18 server imap[518]: SQUAT failed to open index file
Jan 12 09:08:18 server imap[518]: SQUAT failed
Jan 12 09:08:18 server master[520]: about to exec /usr/bin/cyrus/bin/imapd
Jan 12 09:08:18 server imap[520]: executed
Jan 12 09:08:18 server imap[520]: accepted connection
Jan 12 09:08:19 server imap[516]: Expunged 7 messages from user.paul.Junk
Jan 12 09:08:19 server imap[520]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
Jan 12 09:08:19 server imap[520]: quota set to "unlimited" for mailbox user.florensis
Jan 12 09:08:19 server imap[517]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
Jan 12 09:08:19 server imap[517]: open: user florensis opened Junk
Jan 12 09:08:19 server imap[517]: SQUAT failed to open index file
Jan 12 09:08:19 server imap[517]: SQUAT failed
Jan 12 09:08:19 server imap[519]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
Jan 12 09:08:19 server imap[519]: open: user florensis opened Apple Mail To Do
Jan 12 09:08:19 server imap[520]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
Jan 12 09:08:19 server imap[520]: open: user florensis opened Deleted Messages
Jan 12 09:08:19 server imap[520]: SQUAT failed to open index file
Jan 12 09:08:19 server imap[520]: SQUAT failed
Jan 12 09:08:20 server imap[513]: accepted connection
Jan 12 09:08:20 server imap[513]: login: [172.16.1.99] paul plaintext user logged in
Jan 12 09:08:20 server imap[513]: quota set to "unlimited" for mailbox user.paul
Jan 12 09:08:20 server imap[514]: Expunged 1 messages from user.paul
Jan 12 09:08:20 server imap[513]: seen_db: user paul opened /var/imap/user/p/paul.seen
Jan 12 09:08:22 server imap[513]: open: user paul opened Apple Mail To Do
Jan 12 09:08:22 server imap[516]: open: user paul opened Sent Messages
Jan 12 09:08:22 server imap[515]: Expunged 1 messages from user.florensis
Jan 12 09:08:23 server imap[517]: open: user florensis opened Apple Mail To Do
Jan 12 09:08:23 server imap[518]: open: user paul opened Junk
Jan 12 09:08:24 server imap[518]: Expunged 1 messages from user.paul.Junk
Does this help? It then cleared itself?? -
I am trying out service start/stop between different JVMs but am not seeing what I expected. I have attached a quickly written test program to try out a scenario.
1. Run the attached program (java Test -Dtangosol.coherence.cacheconfig=servicetest.xml) in 2 JVMs. Let's call them JVM1 and JVM2.
2. At the JVM1 command prompt, type: startservice
3. At the JVM1 command prompt, type: startcache
4. At the JVM1 command prompt, type "i" six times. This should insert 6 items into the cache.
5. At the JVM1 command prompt, type "c". Following is what is displayed:
key=4, value=4
key=3, value=3
key=2, value=2
key=1, value=1
key=5, value=5
key=6, value=6
6. At the JVM2 command prompt, type: startservice
7. At the JVM2 command prompt, type: startcache
8. At the JVM2 command prompt, type "c". The six cache items are displayed.
9. At the JVM1 command prompt, type "stopservice". The expectation is that the service on JVM1 is stopped and the cache items on JVM1 are transferred to JVM2.
10. At the JVM2 command prompt, type "c". The following is displayed:
key=4, value=4
key=3, value=3
key=1, value=1
key=6, value=6
Cache items 2 and 5 have disappeared. Why?
Thanks
Ghanshyam<br><br> <b> Attachment: </b><br>Test.java <br> (*To use this attachment you will need to rename 508.bin to Test.java after the download is complete.)<br><br> <b> Attachment: </b><br>Test.class <br> (*To use this attachment you will need to rename 509.bin to Test.class after the download is complete.)<br><br> <b> Attachment: </b><br>servicetest.xml <br> (*To use this attachment you will need to rename 510.bin to servicetest.xml after the download is complete.)Following is javadoc for the Controllable.shutdown( ) method:
Stop the controllable service. This is a controlled shut-down, and is preferred to the stop() method.
<b>This method should only be called once per the life cycle of the controllable service</b>. Calling this method for a service that has already stopped has no effect.
I might need to expand and shrink the horizontal span of the cache multiple times without having to shutdown the JVM, which means I might need to shutdown the service multiple times, but the javadoc says I can't call shutdown more than once. Is there a different way to perform an orderly service stop?
Thanks
Ghanshyam -
Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?
The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
#Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
#Disable all plugins
#Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
My iPad Air has the latest software version(iOS 7.1.2) update, since that update the location services have stopped working. have a solution?
I have had the same problem, so many apps do not work properly without it! Apple says the internet satellite, the Internet satellite says Apple, back and forth with the blame instead of fixing the problem. Have turned location on and off, reset everything multiple times ( lots of hours and bandwidth to download ), Siri is now working part time, I guess she has cut back her hours for the summer. Even in these forums was suggested to check with Skyhook who does the global positioning, and after hours with them, they ended up saying that they have nothing to do with it anymore, Apple does. All to no avail and much frustration! I wonder if this is happening with the iPhone's? i'd like to know if this is happening with others that do not use satellite as their ISP? That would help narrow down the argument with Apple vs. satellite. Fell for you! Someone please help us! Ta
-
Need Urgent Help... Essbase service is stopping automatically
Hello All,
In our production box essbase service is stopping automatically. Can you please help me to resolve this issue...
OS : Windows Server 2003
Hyperion : 11.1.1.3
SharedServices_Security_Client.log
2013-12-09 01:17:25,609 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2013-12-09 01:17:25,625 INFO [main] CSS Log file will be generated at F:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2013-12-09 01:17:25,625 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2013-12-09 01:17:25,625 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2013-12-09 01:17:25,672 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2013-12-09 01:17:28,390 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2013-12-09 01:17:29,062 INFO [main] Got hub location from Registry:http://servername:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2013-12-09 01:17:29,312 INFO [main] Got native directory location from Registry:servername:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2013-12-09 01:17:29,328 INFO [main] URL constructed out of values in Registry database:ldap://servername:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2013-12-09 01:17:29,578 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
ESSBASE.LOG
[Mon Dec 09 01:17:25 2013]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Mon Dec 09 01:17:25 2013]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Mon Dec 09 01:17:29 2013]Local/ESSBASE0///Info(1051199)
Single Sign-On Initialization Succeeded !
[Mon Dec 09 01:17:29 2013]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Mon Dec 09 01:17:30 2013]Local/ESSBASE0///Error(1051429)
Essbase Product Existence Check Fails against the Shared Services Server with Error []
Thanks,
PrathapHi Prathap,
[Mon Dec 09 01:17:30 2013]Local/ESSBASE0///Error(1051429)
Essbase Product Existence Check Fails against the Shared Services Server with Error []
Above entries in Essbase.log tells that Essbase product entry was not found in Shared services.
As you rebooted the server, you might have lost domain server logs, but I think you can get more info about root cause in Essbase.log or essbase related log files only.
Regards,
Santy. -
Licence service has stopped working
Getting the above error when launching Dreamweaver CS4. Have tried all the "solutions" listed on Adobe site to no avail. The last "solution" cleared the error pop up , I get to accept the licence agreement then Dreamweaver crashes.
Any advice appreciated.Hi Nancy,
The original error code was /3 when the pop up "Licence service has stopped working" appeared. I went through all the solutions listed at Error "Licensing has stopped working" | Mac OS but it wasn't until I completed Solution 6 that the pop up disappeared. I get the licence agreement page click accept but nothing further happens.
Macbook Air OS X 10.9.5 -
Apple Mobile Device Service Has Stopped working
Okay, I'm running 32-bit windows vista Buisness service pack one, and am getting the following message whenever I open iTunes: Apple Mobile Device Service has stopped working and was closed. This is not an issue connecting my iPod, which still connects fine, the issue arrises when I try to sync my new iPhone, and it is not recognized. Windows does recognize my iPhone, as seen in device manager and the fact that the phone charges when connected. iTunes will fail to recognize it due to the aforementioned error in starting itunes. The error log looks like this:
Fault Bucket 1303677566, type 1
Event Name:APPCRASH
Response: None
Cab Id: 0
Problem Signature:
P1: AppleMobileDeviceService.exe
P2: 2.50.39.0
P3: 49f9b7cf
P4:StackHash_228c
P5:6.0.6001.18000
P6:4791a7a6
P7:c0000374
P8:000b015d
P9:
P10:
Attached Files:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERDFFE.tmp.ver sion.txt C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERDFFF.tmp.app compat.txt C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERE04E.tmp.hdm p C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERECEC.tmp.mdm p
These files may be availible here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0d8e0c5b
I have gone through the basic troubleshoot on apple doing the following:
restarting iphonesorry, i maxed out space in the last post.
The steps I have taken to remedy the error are the following:
restart iPhone
restart computer
check usp ports
reinstall entire iTunes package(updater, iTunes, quicktime, apple mobile device support) several times
I have also tried:
-Running itunes as administrator, which I already am
-restarting the apple mobile device service in services
-checking for third party conflicts by having only itunes and the apple mobile device start when the computer starts and installing/running itunes with my anti-virus off.
-updating AMDS(apple mobile device service) with older versions of the software from 8.1 and 7.7
-deleting usbaal.sys from 8.2 and reinstalling 7.7 and 8.1 version
I have tried various other fixes found online, In addition to spending two hours on the phone with various apple "experts" who were baffled by my problem.
This problem is giving me the upmost frustration and I am becoming incredibly angry at both vista and iTunes. Please help
-Kyle
P.S. If you didn't catch it, i'm running the latest driver updates and the latest itunes, 8.2 -
GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it
I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.
Hi Syed,
I have also started facing the exact same problem since the past few months with my docomo service.
Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
Did you upgrade to iOS 5 and did it help?
PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
Regards,
Hemant
Maybe you are looking for
-
Question regarding JSTL and function calls
Hello I'm quite new to JSTL and I'm having a problem accessing a function when I want to pass argument to that function. Im using MVC where my M (model.jsp) can be accest from my V (view.jsp) by doing ${model.(parameter/some function) } in my M I hav
-
Quicktime Export causing Out of Sync Audio?
I'm trying to export a self contained Quicktime movie from my timeline, and every time I try, the audio ends up being out of sync. What am I doing wrong? The audio is set to just the defaults, 16 bit, 48khz. Sequence settings: HDV1080p30 When I bring
-
since I changed my notebook from Macbook Pro 2 Sony Yario the problem was born
-
In 11g database , I changed compilation mode from 'INTERPRETED' to 'NATIVE' by executing dbmsupgnv.sql Still some of the packages are in INTERPRETED mode . Why would some be in INTERPRETED while others are in NATIVE . Thanks in Advance for your input
-
Hi expert I don't able to write this abap code. I have 2 itab and I shoul add lt_ausp into lt_equi lt_equi EQUNR SERNR 000000000010001803 000000000000008795 000000000010001805 000000000000001233 lt_ausp Cx