Hamachi isn't in network and sharing center

my network and sharing center used to have hamachi under my wifi but for whatever reason today i checked and my hamachi is gone from there. a tunnle errer (vpn error) is what alerted me of this. any help would be great.

I have same problem.
After uninstalling LLDP at network adapter settings it is impossible to install it again because of 'access denied' error.
Atleast my lltdsvc service is running for few seconds when I start it manually.
Could use some help, please.
Network map does not exist in windows 8 according to this site http://www.techrepublic.com/blog/windows-and-office/compensate-for-the-missing-network-map-feature-in-windows-8/

Similar Messages

Wifi icon and network and sharing center show no connection but I have full access

The wifi icon has an orange "ball" on it. Left click and it shows I am connected to my wifi. But at the top of the window is says "not connected." Go to Network and sharing center and it shows a red x going to the router.
All this and I have full access to the internet. What is going on? How to fix?
Duane G. Leet, PhD 45 years experience in technology

Hi，
For this issue, first I suggest you keep the latest driver for the network adapter, and disable other network adapters except the one you're using now, check if this issue persists.
or you can delete this wifi profile in manage wireless networks, then manually reconnect to this wifi, check if it make any difference.
I also would like to share this link with you
The Network Connection Status Icon
http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
Yolanda Zhu
TechNet Community Support

WIN-E4UR1A468LC in my "Network and Sharing Center"

I recently downloaded a couple of media players. After installing not only did they not work the way I wanted but I got some additional stuff (viruses) installed as well. I have ran my antivirus and anti malware live and in safe mode. I ran a rescue disk on my computer, and still I can't get onto the www. I can access my email via Microsoft Outlook, but both browsers (Internet Explorer and Firefox) can't connect to the internet. BTW, when I'm in "Safe Mode" or running my rescue disk, I can access the www just fine. Now I see in my "Network and Sharing Center" that I have a new device under the heading "Home Automation", WIN-E4UR1A468LC. Does anyone know what it is and what it does? I suspect it is, at least, part of my problem. Right clicking than going to Properties, doesn't tell me much either. Manufacturer: Lenovo
Model: LnvCon1.0
Model number 1-00-00
Device Website: Presentation webpage unavailable
Serial number: 0000001
M.A.C. address: Unavailable
Unique identifier: uuid: 73a2b265-6259-44ce-a03b-cdc5aa358dcf
IP address: 127.0.0.1 Obviously a bunch of bogus information.
I am afraid if I try to uninstall WIN-E4UR1A468LC I may end up doing more harm than good. Any help will be greatly appreciated.

download Portable Windows Repair (all in one) from one of the following:
http://www.tweaking.com/content/page/windows_repair_all_in_one.html
http://www.majorgeeks.com/Tweaking.com_-_Windows_Repair_Portable_d7222.html
http://www.bleepingcomputer.com/download/windows-repair-all-in-one-portable/
Unzip the contents into a newly created folder on your desktop. Make sure your AV protection is turned OFF before running the tool....
Open the folder, run the tool by right click on Repair_Windows (icon with red briefcase) select "Run as Administrator"
From the main GUI do the following:
Select Tab 3 and allow it to run Disk check
Select Tab 4 and allow it to run SFC
Select Tab 5 and Create System Restore Point
Select Start Repairs tab => Click the Start
The repairs window will open, uncheck the boxes as indicated, also the "Restart" option, then select Start...
DON'T use the computer while each scan is in progress.
Post the log, to access select "settings" tab > "open log folder" tab, log will be named _Windows_Repair_Log

Network and Sharing Center: You are currently not connected to any networks!

This happened all of the sudden, I restarted the system and BOOM!
After noticing the icon with the Exclamation mark at the system tray, there was nothing wrong with communication but the reporting is really messed up!
I've uninstalled the NIC driver and reinstalled it, reviewed services permission and if they are running but still no lucky here...
It's Win 8.1 Pro x64, the computer is member of a domain and I'm surely online, otherwise I could not be writing this post! ;)
Any help would be greatly appreciated!

did you upgrade your Windows 8.1 from XP?
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-not-connected-to-network-but-it-is-shows/873d7474-6149-43bc-a94b-a29ff75afaa7
Check OP reply:
A follow up for anyone reading this. My problem was apparently caused by upgrading from XP and usinging the keep files and settings option. Though there are very limited items brought over from an XP installation, something buried somewhere disabled the
network connections.
To fix this, Windows 8 has a new feature called reset. This basically does setup all over again if you choose the erase files option. You have to enter the product key again when you do this. It is a clean installation. I had to update the graphic
card drivers, add Media Center back in, install the HD Homerun Prime software, run the cable advisor, do TV setup and finally have it working as I had planned.
I suggest try same procedure (if you upgrade from XP to Windows 8.1), choose reset and reinstall back all the drivers

Network and Sharing Centre problems (again)

I seem to be tearing my hair out once again with the Network List Service. Several months back the Network and Sharing centre stopped displaying or reporting the active networks, although I was connected with internet access. A consequence was most of the
Metro apps would not work as they thought the computer was off-line.
The problem seemed to be that the permissions were wrong in the Network List hierarchy and adding Full Control for my user account in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\NetworkList' seemed to solve the problem.
Once again thought the Metro apps are not working reporting no internet connection and the Network and Sharing centre has the following message:
Unknown
The service to detect this status is disabled
More Information
When I select More Information I get a dialog asking if I want to turn on Network List Service, when I click "Turn this on' nothing happens.
Having looked in the Event Viewer, there are a large number of this entry, maybe it is related?
DCOM got error "1068" attempting to start the service netprofm with arguments "Unavailable" in order to run the server:
Network List Service is reported as running in Services.msc. and task manager.
I tried to check the permissions in the registry key as I did before but key was missing (i think). I tried switching to a local account on the computer from my Microsoft Live account but no change, although when I checked the registry, the NetworkList
key was there and the permissions were correct. Maybe I was just looking in the wrong place but I was pretty sure it was missing...
Not sure where to go next with this..

Hi,
The Network and Sharing centre opens as normal but where you would normally see
'View your active networks' followed by the network or list of networks that you are connected to it just says:
Unknown (when view your active networks would be)
The service to detect this status is disabled
More Information
Clicking on 'More information' informs me that the Network List Service is not running and asks if I want to start it, clicking yes does nothing. The Network list Service is listed as running in Service.msc
I have tried a full virus scan and also ran a whole host of anti malware tools and the computer seems clean. I also tried sfc /scannow with no problems detected.
I restored and old clonezilla backup I had and it is fine now but made a system backup before I did. This is the second time this has happened and I would like to find a solution so I will revert back to the drive image with the issue and post a screen shot.

Airport network and sharing Internet connection

Hello all,
I have hit this problem with sharing an internet connection on an airport network. Maybe its a simple fix, maybe it a "can not be done", answer.
My set up may be a little hard to describe. To explain, completely wireless set up in my network, 1 x imac and 1 x powerbook, all on airport and using an airport express. This includes my new printer. All connected through airport express network, call it network A.
Up till now i had a modem with an ether net cable plugged into the airport express. All was fine.
I am in jakarta, the cable internet providers here are hopeless, slow connection speed.
Last month a new wireless internet service was released. Called 3.5 G. Its lightning fast and reliable. Basically you get a wireless USB modem attach it to your computer and you are always connected to the internet wirelessly. You can travel anywhere with it. The 3.5G is primarily for mobile phones but i use it just for internet. This modem is connected to my powerbook and works great.
Now, the useless cable internet connected to my airport express is still connected for my Imac to use.
My problem is that i would like to share my high speed internet connection from my laptop to my imac. Problem is that when i allow sharing from my laptop, the intenet works fine on both machines but on the powerbook, which is doing the sharing you get an arrow symbol through the airport icon at the top.
The laptop can NOT access the local airport express network A. Hence i cannot use the printer or see the imac. That is my problem, i cannot print from the powerbook unless i stop sharing. When you share an internet connection the sharing computer seems to create another computer to computer network and does not join the existing arirport network.
This is probably a little confusing. Hopefully, someone may have some ideas. My alternative is to buy a new fixed position modem/router for the 3.5G system. Its about $600. Ouch.
Any ideas
thanks for the interest.
joe

Selamat Phil Smith,
Actually do we know each other, cause i know a phil smith.
Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
Cheers and thanks for the idea
joe

Airport Extreme joining a network and sharing wired internet connections

Hi everyone,
My new ISP installed their modem/wifi router (Sagemcom) in my home two months ago. Since I share HDDs over the wifi network, I installed my airport extreme near the modem/wifi router and used it to "extend the network", and it worked fine until recently. It stopped working suddently with the yellow light flashing. When I tried to reconfigure it, I always got errors, needing to reset it even to be able to see it again in Airport utility. Honestly, I have absolutely no idea why it stopped working. I tried connecting the Airport Extreme with an ethernet wire to the modem with the same result. So, I decided to move the airport extreme in my living room and use it to share the internet connection with my PS3, slingbox and Apple TV, telling myself that a partly wired connection would improve the signal (since I also had an Airport Express in the living room extending the network before everything stopped working). Now, everything works; the green light is on, HDDs are available on the wifi network, I can only connect to the Sagemcom routeur but, meh, what do you want, BUT, my slingbox, Apple TV and PS3 can't connect to the airport extreme through a wired connection.
Two questions:
1- Is it possible to share a wired internet connection with my Slingbox, PS3 and Apple TV from an Airport Extreme that has joined the network? If yes, what do I need to do to make it work?
2- Any idea why my first setup stopped working?
Any suggestions?
Thanks a lot,
Frank

1- Is it possible to share a wired internet connection with my Slingbox, PS3 and Apple TV from an Airport Extreme that has joined the network? If yes, what do I need to do to make it work?
Unfortunately, the Ethernet ports are not enabled when the AirPort Extreme is configured to "join" a wireless network.
Ironically, the less expensive AirPort Express does have the ability to "join" a wireless network and deliver an Ethernet signal at the port(s).
2- Any idea why my first setup stopped working?
None that you probably have not already thought about. The most commons cause is a sudden power outage, or even quick power "blip" can sometimes result in the Extreme to losing some of its configuration settings. Otherwise, gremlins are hard to catch.

Trying to connect 2 mac mini's as a network, and sharing printers

Hello to all. Please help me as I'm a newbie on these Mac mini's. I am trying to create a network between the two mini's and I would like to share files between them and be able to print from the upstairs mini to the printers hooked up to the downstairs mini.
Mini 1 (downstairs) has 2 printers attached directly, a HP color laserjet and a Epson 800 Artisan
Mini 2 (upstairs)
Mini 1 and mini 2 are both connected via ethernet to the Netgear router.
Here is my problem:
on the mini 1, I can print and even access the mini 2 via sharing. I can screen share and view folders that is on the mini 2.
However, from the mini 2 computer, I cannot get the screen share and folder sharing from the mini 1 computer. I show that it is there, but when I try to connect, I get a message that states: CONNECTION FAILED The server may no exist or it is not operation at this time. Check the server name or ip address and your network connection and try again.
On the mini 2 I also cannot get anything to print. It doesn't even show that the printers that are supposedly shared at the other computer are present. I tried to add them, via default icon or even ip from the print and fax preferences, but I get error messages and cannot print.
ON THE mini 2: When I used the 'default printer' icon, both of my printers showed up using bonjour shared and I 'added' them. But when I tried to print, I got a message stating:
*Connecting to downstairs-mac-mini.local on port 631...*
*Unable to connect to printer; will retry in 30 seconds....*
I deleted both printers as bonjour shared and tried to make the printers an ip internet shared, and put in the ip address xxx.xxx.1.2 (mini 1 ip address) but I got a message saying that that ip address was being used. I changed the ip address to xxx.xxx.1.5 (mini 2 ip address) and it looked like it was going to print, but it automatically goes to pause. (doesn't matter which printer it is, I can't print from either. I never did get either of the printers to work on mini 2.
I have done the following: On the mini 1, the printers are marked shared. On both computers the shared folders are marked shared, along with screen sharing. I also added all files on both computers to be shared as to who can read only or read and write.
Also, I have also gone to the 'system' icon and on internet sharing, I have made both computers to be shared, with the appropriate check marks done on the list of services I want shared.
ON both the mini 1 and mini 2 I have set the network to XXXXX Home and it automatically configured and states that my ethernet is connected.
On the downstairs computer, I can see the 'shared computer, and am able to access the files.
BUT on the other computer upstairs, I do see the downstairs computer, but it fails in the connection.
I noticed that the ip address for each computers state the same number, except the last digit is different. xxx.xxx.1.2 for the downstairs mini and xxx.xxx.1.5 for the upstairs mini. The router number and dns server along with the subnet mask are the same numbers between both of the computers.
I am going to set the power settings NOT to sleep when idle so that might help when I am trying to view files on each mini's.
So right now I am stuck with how to make the upstairs mini to print on the downstairs printers, and how to see the downstairs mini on the upstairs mini display.
Any help from anyone is very much appreciated. Sorry this is so long. Thanks in advance!

Mini 1 Allow only essential services
Mini 2 Allow all incoming connections
I changed mini 1 to allow all incoming connections
That did the trick for viewing, now will that help me on my printer issue also? YES! wahoo! Thanks so much, I would have not thought about checking the firewall.
Kudos to you and all your help!

Internal orders/networks and Cost center

is it correct to say, all internal orders and process orders will roll into a cost center at the end.
Sri

Hello Ganga,
You can settle the costs collected on an internal order to one cost center, one G/L account, or one business process using one settlement cost element.
Hene, it is not necessary that all internal orders will roll in to a cost centre at the end.
Rgds
manish

Why can't Apple TV's and iOS devices see home sharing on my Windows 7 computer when iTunes libraries on other computers on the same network and connected to the same Home Sharing can?

I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

I am trying to get my airport extreme to extend my telstra 4G wi-fi network , and i have turned sharing on, but have no green light on the capsule.

i don't know what i am doing wrong and have tried to follow instructions on the discussion page , set up extend network and shareing on, but i still don't have a green to go on the base station, and either have to be on my 4G telstra network , or back into wi-fi and tick time capsule network. one or the other. i don't understand a lot of this stuff .

leanne5725 wrote:
I have a telstra modem/wireless thingy. Unsure what you mean by using the Apple router as AP only (what do you mean by AP).
AP is access point.. ie wireless point to access the network.. also called WAP.. wireless access point.
Also I keep getting a message saying (PROXY error - the proxy server received an invalid response from an upstream server. The proxy server could not handle the request) - then I go back out, then back in a few times and it works. Also, a box keeps coming up saying (bad gateway), but Ive never had a problem before I had this apple computer.
It is just today.. some proxy has been fixed.. openssl updated?? Anyway.. it is fine now. I could not get on this site at all for the last few hours.. same issue.
What Apple routers do you own now??
You can plug it into the TG797N (wan on apple router.. to LAN on Telstra router) and run it in router bridge..
And create a wireless network..
Then connect your clients to the Apple wireless instead of the TG797N wireless.

Printing to a Windows shared printer, keep getting "Hold for Authentication" when I'm on the Windows shared network and can browse the computers.

I have had two MacBook Pros now, and this has been an issue in Mountain Lion and Mavericks. I've got a shared printer on the local Windows network (it's a USB printer shared via the network and the computer), and the other Windows computers in the house can print to it no problem. The Mac sees it no problem, yet whenever I try to print to it, I just get "Hold for Authentication."
Like I said, persists over Mountain Lion and Mavericks. No other computer in the house has any issues printing to it. I've installed the drivers for the printer as well (Brother HL-2240).
I've tried to follow the instructions here: https://discussions.apple.com/message/23268762#23268762 but the printer isn't listed in Keychain Access.
Any thoughts?
Thanks in advance!
Patrick Campanale

Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.

Unable to print to Canon iR-Adv C5045 from MacBook Pro that is connected to Windows computer and shared on the network

I am unable to print to a Canon iR-Adv C5045 from a MacBook Pro (OS X 10.9.4) that is connected to Windows NT computer and shared on the company network. I am connected to the network by ethernet.
I was able to add the printer manually by going to Advanced, Windows printer via spoolss, smb://computer name/printer name and used the Canon iR-ADV C5045/5051 driver.
When I print it appears to be printing but nothing comes out. I checked the completed jobs from the Print Queue and the job is listed. Checked the print log on the printer and it isn't listed. Is there a different driver I should be using for this configuration?

You may not have a choice as to what driver you can use. If the ADV C5045 only has the default UFR2 printer kit, then you will have to use the UFR2 driver - which is what you are using now. If you can access the copier, press the Counter Check button on the control panel. Then on the display you will see an entry labelled Check Device Configuration. Select this and scroll down through the pages. You are looking for an entry called PS. If you see it then the Canon does have the optional Postscript printer kit enabled and this will let you use an alternate driver. One suggestion would be to create the printer again using the same setting that you have done already but this time select the Generic Postscript driver included with the OS rather than use the Canon driver. This will help to determine if the driver is the cause.
If there is no PS option you will have to use the UFR2 driver and this could be the problem, as the Canon drivers don't always work well on a Mac via a Windows share. As a test, are you able to create a print queue directly to the Canon rather than via the Windows share? If you can, then this will let you check if the driver currently installed will work, as there can be settings on the copier that can block/stop you from printing. Assuming that you can print to the Canon with a direct connection from the Mac, then we can work on getting the printing via the shared queue. But if it doesn't print directly from the Mac, then it confirms that it may not be the server and more to do with the copier.

Networking and File Sharing with XP PC's

I bought a MacBook pro 2.2 ghz last week and have an issue when it wakes from sleep mode. I have a Linksys wrt54g wireless router connected to my home XP machine and the notebook connects to the router fine for internet and for sharing files with the XP machine(noted as MSHOME under network locations on the mac).
Sometimes when the notebook wakes from sleep it fails to detect MSHOME under Network, and will only show SERVERS and LIBRARY yet, the PC can still see and access files on the Notebook at certain times when this happens. Internet access from the router is never affected.
I also tested this with an ethernet cable last night and the same thing occurred. At first I thought it was the airport, but now I am not sure.
Bye the way, also add one Kernel panic to the mix after having it for two days, but haven't had one since.
I have read that the sleep mode has some strange reactions with these systems. I think it's now noted as an enhanced sleep mode.
I am scheduled to see a Genius (yeah, right!)at a local store on Saturday and wondering what kind of run around I will get.
Anyone have any ideas why this is hapening or how I can correct it?
Santa Rosa MacBook Pro 2.2 ghz Mac OS X (10.4.10)
MacBook Pro 2.2 ghz Mac OS X (10.4.10)

Your problem is not one requiring a Genius but more a user knowledge issue (hey everyone has to start somewhere!! : ) ). Remote Desktop is not a solution for what you want to achieve. The variables you mention are not problem points if you understand networking and hence the reasons why you are having issues.
For starters, don't rely on network browsing to find resources on a network; least of all from a Mac! Network browsing works much better under Windows (sorry Apple, but it just does).
Secondly, realise that if you change passwords, it will effect what you can access (for obvious reasons). If typing a username and password is acceptable for you then this is a moot point. If you don't want to type passwords, then make sure you use accounts with matched username/passwords.
In Finder, select the Go menu, then Connect to Server... This is the sure fire way to ensure you get the drive mapped properly. Type in:
smb://computername/sharename
where computername is the netbios name of your Windows PC, and sharename is the folder share name. Create an alias of it somewhere so you don't need to do it again! Don't use an IP address, as if the address changes your alias will fail - use the name and as long as you don't change the PC name you'll be fine.
Post back here if you're still having issues or something isn't clear and we can throw in some more pointers.

Bluetooth Network and Internet sharing issue

I'm trying to set up a network through Bluetooth between two computers having the latest Toshiba Stack installed, and to share the Internet connection with the second computer.
On the firs computer I've set the Internet Connection Sharing, and because of this it automatically sets the TCP/IP adresses for the Bluetooth Personal Area network (192.168.0.1).
On the 2nd computer, i've set everything to obtain it automatically. Firewalls (Kaspersky) disabled.
When I connect the 2 Bluetooth devices, everything looks fine, the 2nd automatically obtains the IP adress, I can ping both computers, and the Internet also works on the 2nd computer, for a few seconds! After that, it appears like the 2nd computer is disconnected from the network... what could be the problem?
In the event viewer under the System tab, I've found Informations like these:
2nd comp:
The system detected that network adapter \DEVICE\TCPIP_{E44D18EB-91F5-4... was connected to the network, and has initiated normal operation over the network adapter.
The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.
and at 1st comp also appeares this:
The system detected that network adapter Bluetooth...Area Network - Packet Scheduler Miniport was disconnected from the network, and the adapter's network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

================================================== =========================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 17 31 27 e6 10 ...... Intel(R) PRO/1000 PL Network Connection - Packet Scheduler Miniport
0x20004 ...00 60 52 0b 53 e3 ...... Realtek RTL8029(AS) PCI Ethernet Adapter - Packet Scheduler Miniport
================================================== =========================
================================================== =========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 195.222.104.193 195.222.104.219 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.1 192.168.0.1 30
192.168.0.1 255.255.255.255 127.0.0.1 127.0.0.1 30
192.168.0.255 255.255.255.255 192.168.0.1 192.168.0.1 30
195.222.104.192 255.255.255.224 195.222.104.219 195.222.104.219 20
195.222.104.219 255.255.255.255 127.0.0.1 127.0.0.1 20
195.222.104.255 255.255.255.255 195.222.104.219 195.222.104.219 20
224.0.0.0 240.0.0.0 192.168.0.1 192.168.0.1 30
224.0.0.0 240.0.0.0 195.222.104.219 195.222.104.219 20
255.255.255.255 255.255.255.255 192.168.0.1 192.168.0.1 1
255.255.255.255 255.255.255.255 195.222.104.219 195.222.104.219 1
Default Gateway: 195.222.104.193
================================================== =========================
Persistent Routes:
None

Hamachi isn't in network and sharing center

Similar Messages

Maybe you are looking for