Hamachi status reads fine but applications will not work
I have a problem with my Windows 8.1 PC not wanting to use Hamachi correctly with any 2.2.x version. It's not the software's fault, or my ISPs, or my networks, but the computer it's running on. Any connection made through hamachi results in a time out (At least according to Minecraft). The In packet loss goes to 50% while a connection is attempted. All Hamachi status indicators on both ends read green, including the diagnose option. I am a relatively technical user so if there is ANYTHING that would make the 2.2 versions not work and the 2.1 versions work then I would be willing to try it. I've done all the standard stuff like uninstall and reinstall, disabling firewalls, and disabling AV but none changed the outcome. I am very likely to have stupidly messed up some internal Windows setting, but I doubt even the devs know of their effects. Upgrading to Windows 10 might fix this and if it does I'll just thank anyone who left feedback and mark this as solved.
Same result after Windows 10 upgrade. Log reads messages similar to "sending ka because of possible rx loss, want 22, have 27"
Similar Messages
-
Hello,
After a Mac update, flash player (along with silverlight) asked to be installed when I tried to watch video content or play games. I installed flash player and it reports being successful and appears in my applications. However, I cannot watch videos or play games, every time I am asked to install flash player again and again and again. I suspect this has something to do with plugins but I am not sure. I have un-installed the program and reinstalled but it still will not work. I check my security settings and it does allow plugins. I erased my temporary internet files. I don't know what else to do. Any help would be appreciated! This is incredibly frustrating. Thank youThank you for responding! I am using a macbook pro 2011, 2.2ghz, intel
core i7, 16gb - version 10.9.5. I have not intentionally installed any ad
blocking software; intact I am inundated with it most times. My online
school work required that I disable pop up blockers and all was well until
an update a few weeks ago for both security and operating system. To the
best of my knowledge I am allowing pop ups and plugins but this may be
where the trouble is. I am unsure, honestly of what security is running
besides what I find in the system preference/security tab. Thank you again
for responding and any help is most appreciated.
Holly Norman
On Wed, Apr 1, 2015 at 5:47 PM, Jeromie Clark <[email protected]> -
I am using mail for emails. It receives fine but it will not send. I am using an o2 account (smtp.o2.co.uk). Is o2 incompatible with mail? if so can you tell me which email application I can use instead? Many thanks Steve
Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other -
I have paid for creative cloud, photoshop works fine but it will not let me register lightroom
I have paid for creative cloud, photoshop works fine but it will not let me register Lightroom
Lightroom must be installed via the Creative Cloud Application.
It sounds like you have installed a Perpetual Licensed Version or a Trial Version of Lightroom. Uninstall any versions you have installed of Version 5 and then reinstall via the Creative Cloud App. -
I installed 2.3 upgrade,
installer folder is in harddrive but application will not open or replace 2.0 as it says it "should". When I attempt to it just reinstalls the installer, never the functioning application. I have tried too many times now. Always same response. WOuld love to upgrade ( and purge all the alias 2.3 off hardrive!when I went to the library folder there was no receipts only
com.adobe.Reader whihc included install.log
so I guess that means something is missing?
If above still doesn't resolve problem - go to the folder named
"Receipts" in the Mac OS X Library folder (i.e. the main Library
not you Users Library) and delete the file named Adobe Photoshop
Lightroom 2.pkg
> -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I subscribed to conversion software in reader x but it will not allow me to convert
i subscribed to conversion software in reader x but it will not allow me to convert. keeps coming up with subscribe window
Hi Don,
I apologize for the delay in your service.
sometimes it takes a bit to configure your subscription, i can see your subscription order is not yet completed, it is still in pending state.
It might take 24 hours. We regret the inconvenience.
Regards,
~Pranav -
I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?
Something is wrong with your charger or cable.
If it works with another charger, then it is not the iphone -
I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.
Have you tried the following troubleshooting document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK. -
ipad screen will not slide. Tried resetting and a factory reset but still will not work.
I have the same issue on my Ipad Air. Screen will not rotate, I have reset the settings, still only displays in the portrait mode. A couple of interesting things though. a couple of days before it completely locked up into portrait I would have to turn the ipad off and hold it in the orientation I wanted because it would not change orientation after I was in an app.
Also, I just played a Netflix video and it was in landscape mode.
Any ideas?
Thanks, -
I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!
There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
See this: <br />
[http://vistasupport.mvps.org/run_as_administrator.htm] -
I'm trying to add album art to a CD I imported but it will not work. The album art will add to other albums but it won't show on the album. The CD is imported from Japan, didn't think that would be a problem. Does anyone know a solution?
Vanguard,
You are welcome. As I gather you have now figured out, any of the other formats (AAC, MP3, AIFF, or Apple Lossless) can handle artwork just fine.
Enjoy the music!
Ed -
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?
Buy a replacement keyboard. They're only $50-65 USD.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2
Maybe you are looking for
-
How can i use labview for notebook
i want to know spec of notebook for install labview programm. thank you vermuch. sattaya
-
Windows 8.1 Setup exe This product key didn't work. Check it and try again
I am upgrading my machine with a new MOBO and SSD. I need a full windows 8.1 install disk so I am trying to create one from the WindowsSetupBox.exe file. I am doing this on the machine that I will be upgrading and it currently has 8.1 Pro. When I en
-
Need Preloader for FLVplayback Component
Hi, I'm playing external .flv videos using the 'FLVplayback' component. My client's complaining that they stall and stutter a bit when they start to stream, and wants to know if I can create a preloader for them. Can anyone help or point me in the ri
-
Hi this is Michele, I've got a problem with a temperature sensor, called ULAB Datalogger. It comunicates with the PC through the USB port. I do not have any driver-CD to install, so the computer does not see it when I plug it to the USB port. I was t
-
MobileMe calendars gone missing
Hello! I tried the new MobileMe calendar beta and became so interested that I wanted to start using MobileMe as my primary private web calendar. However I am experiencing some strange issue when I wanted to make the MobileMe calendars available on my