HANA administration guide for SP06 and certification refrences

Hello ALL
I am writing my HANA SP06 (HANATECH_131SP06) on July and preparing HA 200
Please share HANA Administration Guide for SP06 link and other reference links
Thanks,
Sankar

Hi RajiTh R s,
The training material for SAP Education courses is not available for download anywhere (legally).
Good news is that you do not need it.
Most topics that are covered by the exam are clearly explained in the SAP HANA Administration Guide.
For all the ins and outs about the exam, see my blog SAP Certified Support Associate: SAP HANA - by the SAP HANA Academy.
Success,
Denys

Similar Messages

Sap hana administration guide for sps07

I want sap hana administration guide for sps07. Can some one share the document if they have already downloaded it earlier ?

Hi Anju,
There is a link to older versions of HANA documentation on this page: SAP HANA Platform – SAP Help Portal Page
In the intro section, see the last line:
Note: The full documentation set for this and older support package stacks of the SAP HANA platform is available on SAP Service Marketplace .
Cheers,
Jody

Administration Guide for CA Wily Introscope?

Does anyone know where I can find an administration guide for CA Wily Scope 8.0?
I have already reviewed SAP Note 797147. This did not help me. Introscope is already installed and
running. I just want a guide that explains menus and common operational tasks.
Any help would be much appreciated.
Thanks!

Ben
service.sap.com/diagnostics
goto 'Tools in End - to - End Root Cause Analysis' section , there you can see 'Demos' and 'User documentation' and FAQs
and the section 'Learning to use End-to-End Root Cause Analysis'

Guide for Tuning and Optimizing Red Hat Linux AS for Oracle9i Database

I put together a step-by-step guide for tuning and optimizing Red Hat Linux Advanced Server for Oracle9i. It's my first draft version and I would appreciate any comments and feedback.
The article
"Tuning and Optimizing Red Hat Linux Advanced Server for Oracle9i Database"
can be found at:
http://www.puschitz.com/TuningLinuxForOracle.shtml
The article
"Oracle 9i Installation on Red Hat Linux 7.1, 7.2, 7.3, 8.0, and on Red Hat Advanced Server 2.1"
can now be found at http://www.puschitz.com/InstallingOracle9i.shtml
And both links for
"Oracle on Red Hat Linux"
can be found at
http://www.puschitz.com/OracleOnLinux.shtml
Werner

Is this good for Redhat Linux 9.0 and not just the advanced server.
If it is not could you please provide me the links to articles like,
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Database"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i App Server"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Infrastucture"
Thanks.

Looking for Implementation Guide for Sales and Distribution

From where can I download "Implementation Guide" for Sales and Distribution or can anybody mail me the guide?
Thanks in advance for the answers.

HI
REFER BELOW LINK DOWNLOAD
<a href="http://sapbrainsonline.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html">SD (Sales and Distribution) Tutorials</a>
<a href="http://www.esnips.com/_t_/SAP+SD">SAP SD</a>

Where can I find the Flash Player Administration Guide for Flash Player 10.1?

The guide can be found at the following location:
Adobe Flash Player Administration Guide for Flash Player 10.1

Or, for web access, you can use the Chrome web browser, that has Flash built into it. It's available from http://support.google.com/chrome/bin/answer.py?hl=en&answer=95346

Implementation Guide for 2lis_04 and 2lis_03

Hi Experts,
Where can I find implementation guide for 03 and 04 application.
Thanks,
DV

Hi DV,
You can find the How-to guides/implementation guides in the below links:
http://sapbwneelam.blogspot.com/
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards,
Ravi Kanth
Edited by: Ravi kanth on Jul 14, 2009 9:39 AM

Local Administration rights for Xcelcius and Crystal Reports

Hello Customercare,
I am currently compiling a list of software that does and does not require local administrator rights to install and run.
I was wondering if you would be able to assist me, we currently use Crystal Reports version 8.5 and Crystal Xcelsius 4.5. I need to find out if these programs require local administrator rights on the computer they are to be used on to a) Install properly and B) run from that computer by a user without local administrative rights for that machine.
Please let me know or point me in the right direction of a resource who would be able to help me with the above information.
Many thanks for your time,
Phil Booth
GroupM
Technical Support Engineer

Hi Joseph,
Download [Product guide/end userdocument|https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] select your product.
For Business objects Integration kit for SAP click [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Shweta

Guide for 9A0-602 certification exam

I have planned to do Flash mx 2004 developer certification, i
need a good study guide where i can prepare for the exam. I'm an
intermediate in flash. Can any one help me ?. Thanks in
advance.

Hi,
Flash MX 2004 is an old version of Flash and I guess its exam
will be removed from the database soon, so i suggest taking the
most recent exam, especially with Adobe exam policy that your
certification will expire 6 months after the new software version
unless you took a recertification exam.
And for the exam guide for Flash MX 2004, peachpit.com is the
publisher for the Flash MX exam. So, i think you may find the MX
2004exam guide there

Guide for installing and tuning a Vista 64 PC

Yes, I'm going to tax your patience again. This is a guide to setup Vista 64 for NLE work, well it actually applies to any kind of work, but NLE machines may profit more than an Office/MSN machine. One caveat: What I suggest here is a lean and mean machine that is mainly dedicated to NLE work.
First: It is always best to start with a clean install and a complete reformat of the disk. That will ensure that your registry is clean and leaves no leftovers from a previous install. Do not partition the drive, format the whole disk as one.
After installation has completed, first select Control Panel and Personalize. Select Change Desktop icons and ensure that at least Computer is selected. You can choose other icons as well if you want to. I have all 5 selected.
Next check Device Manager (right click This Computer, select Properties and then Device Manager) that you have no problems with drivers for any of your hardware. If there are any yellow exclamation symbols, solve these issues first by having Vista search for drivers and if it comes back with the message that no drivers could be found, get the latest 64 bit driver from the internet for this device.
Once Device Manager has no more problems, go to Windows update and install all critical updates. Nothing more at this moment. After installation and rebooting, again check Device Manager for problems. There should be none. Otherwise get on the internet again and reinstall the latest Vista 64 drivers. Next right chick This Computer and select Manage and go to Event Viewer. Open the Windows Logs and click on System. Scroll through the events and check out any errors or warnings you see. Search the Microsoft Technet for solutions. This is the link to the very informative Technet site to help you solve any issues you may have: Microsoft Technet
Next go to Control Panel, select Programs and Features and select turn Windows features on or off. You may not need anymore than these Windows Features and possibly less, for instance if you don't use a network printer. Also this may be a good moment to turn off User Account Control via Control Panel/Security Settings.
Next go to Vista Services and use the instructions and the table shown to modify the services, so only those are started that are needed in your situation. Anything not needed will only increase boot time and will consume resources, placing a higher overhead on the system than needed.
After rebooting, update all your drivers if you have not already done so. For instance, if you have an ATI card, download the latest drivers, but remember you can do without the Catalyst Control Center. Their drivers are typically denoted by y.m (year, month) so currently the latest is version 9.5
Now go to Control Panel, System and select Advanced system settings, select Visual Effects and select Adjust for best performance, apply and then select the Advanced tab, click on Performance settings, select the Advanced tab, Select Adjust for best performance of programs and then change the Virtual memory. Setup your pagefile with a custom size with equal numbers for Initial and Maximum size on another drive than your C disk and set the C drive to No paging file. If you have read my Storage rules for an editing rig guide, you know you need a fixed size of around 1 to 1.5 times installed memory, unless you have lots of RAM, then you can easily go lower.
Reboot and right click on This Computer, select Manage and select Disk Management. Select drive C, right click Properties and make sure that Index this drive for faster searching and Compress this drive to save disk space are both turned off. Click Disk Cleanup and clean what can be deleted. Repeat these steps for all of your drives. Next go to the Tools tab and select Defragment Now and defrag all drives. While you are at the Disk Defragment window, setup a daily defragging schedule, for instance during your lunch break. That will keep your disks optimized.
This will make sure that the space previously occupied by the pagefile on the C drive is reclaimed and that the new pagefile on another drive is not fragmented and at the very beginning of the drive in the fastest location (at least if the disk was newly formatted and not used).
If you haven't done so yet, completely turn off the Sidebar and do not have it autostart.
No application has been installed yet, so it is time to start with some essential utilities.
The first thing I do is turning off Windows Defender and install Symantec Endpoint Protection.
Next I install Ccleaner. A very handy freeware tool to keep your system and the registry clean and to remove or disable registry based auto startup programs.
The next one to install is the Sysinternals Suite and most notably Process Explorer, Process Monitor and Autoruns. Depending on your use, other utilities in the Suite may be nice to install as well. Installation is done by extracting the relevant files to the C:\Windows directory. Run Process Explorer once and in the Options menu select Replace Task Manager.
Other utilities I install (but of course you may have different favorites) are Beyond Compare, HWMonitor, SpeedFan, SnagIt and 1ClickPCFix
You are now ready to install your regular software. After installation, registration and activation of all your software use Ccleaner, Tools to check for unnecessary Startup entries in the registry. Disable or remove them. Next check your registry by scanning for issues and fix selected issues. Defragment all your disks again and make a restore point.
If you want to get rid of the ridiculously large shortcut arrow at this moment, go to this site: Remove Shortcut Arrow and follow Method 1.
Reboot and you are ready to go with a hopefully much faster and efficient Vista machine.
If you encounter difficulties and have problems that want to ask about on the forum, be prepared to include a screenshot from Process Explorer and either HWMonitor or Speedfan and a link to DXDIAG.txt
Thanks for your patience and I hope you have found some tips and tricks to improve performance.

Quoted from Harm's original post:
"First: It is always best to start with a clean install and a complete reformat of the disk. That will ensure that your registry is clean and leaves no leftovers from a previous install. Do not partition the drive, format the whole disk as one."
I guess I started off on the wrong foot. I just restored my computer to factory condition, which includes a partitioned "Factory Image" which enabled me to restore the machine. Should I be concerned with this? The system drive is actually a 2-drive RAID 0 from factory.
Could I have done this differently?

Config Guide for WiSM And AP 1130

Hi!!
Im looking for Sample config or Config guide for Implimenting WiSM on Catalyst 6500 and 20 AP's 1130 accross mulitple buildings.

Hi Ivan,
Here is some info for the WISM,
Cisco Catalyst 6500 Series Wireless Services Module (WiSM) Introduction
http://www.cisco.com/en/US/products/ps6526/index.html
Configuring a Cisco Wireless Services Module
From this excellent doc;
http://www.cisco.com/en/US/products/hw/modules/ps2706/prod_technical_reference09186a0080702fe2.html
WiSM Troubleshooting FAQ
http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a00806e39b7.shtml
Cisco Catalyst 6500 Series Wireless Services Module Q & A
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_qanda_item0900aecd8036434e.shtml
Hope this helps!
Rob

Can someone help me to find out a study guide for VCA DCV certification

Hi,
Could you someone help me to find out the study guide for VCA DCV..
With Regards,
karthik.N

Download the exam blueprint, and have the objectives in mind as you work through the Fundamentals training: (VCA-DCV) VCA-Data Center Virtualization

Mistake in administration guide for TC / SX Series 7.x

Hi ,
I think this mistake ..
example :
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c60-c40-and-codec-c60-c40-administrator-guide-tc71.pdf
appendice:
ClearPath — Packet loss resilience
ClearPath introduces advanced packet loss resilience
mechanisms that increase the experienced quality when you
use your video system in an error prone environment.
We recommend that you keep ClearPath enabled on your
video system.
Go to Advanced configuration (menu on screen) or open the
System Configuration page (web interface):
• Navigate to Conference 1 > PacketLossResilience > Mode
Choose Off to disable ClearPath and On to enable
ClearPath.
Correct is Experimental -> Conference 1-> PacketLossResilience
good day !!!

There is at least a forum dealing with documentation, so maybe its worth posting it there:
https://supportforums.cisco.com/community/4886/technical-documentation-ideas
Besides reporting it through TAC can be an option as well.
These are the current options:
xConfiguration Experimental Conference[1] PacketLossResilience ForwardErrorCorrection: <Off, XOR, XORWithUniqueSsrc, ReedSolomon>
xConfiguration Experimental Conference[1] PacketLossResilience RateAdaption: <Off, On>
xConfiguration Experimental Conference[1] ReceiverBasedDownspeeding: <Off, On>

Configuration Guide for 6248 and 5548 and VNX 5500

Hi,
Need help here to configure the FCoE Uplink + Ethernet Uplink in Port channel
Following is the connectivity details from 6248, 5548 and VNX5500.
I have configured Port Channel in following way on Both Fabric Interconnect
After Configuring above things I am getting following Faults on Servers
For NetApp3240 ENM source pinning failed, I have allowed VLAN ID 21 in Uplink manager then too this Link state is not showing UP and Same thing go for both FC_vHBA
Kinldy help me to configure the setup
-Amit

Below is the ouput for two commands "show run int port-channel membership" and "sh int port-channel "
===========================================================================
primary# sh run int po2 membership
!Command: show running-config interface port-channel2 membership
!Time: Wed Feb 25 07:55:31 2009
version 5.2(1)N1(1b)
interface port-channel2
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/3
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/4
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/5
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
===========================================================================
primary# sh run int po3 membership
!Command: show running-config interface port-channel3 membership
!Time: Wed Feb 25 07:57:14 2009
version 5.2(1)N1(1b)
interface port-channel3
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/8
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/9
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/10
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
===========================================================================
primary# sh int po2
port-channel2 is up
Hardware: Port-Channel, address: 002a.6a0a.4caa (bia 002a.6a0a.4caa)
Description: ***Link to FI-A in R17***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/3, Eth1/4, Eth1/5
Last clearing of "show interface" counters never
30 seconds input rate 504 bits/sec, 0 packets/sec
30 seconds output rate 2256 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 456 bps, 0 pps; output rate 656 bps, 0 pps
RX
    22208045 unicast packets 747374 multicast packets 27634234 broadcast packets
    50589653 input packets 49083144072 bytes
    21411174 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    2801196 unicast packets 353162904 multicast packets 549464 broadcast packets
    356513564 output packets 25978572978 bytes
    101325 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
35 interface resets
===========================================================================
primary# sh int po3
port-channel3 is up
Hardware: Port-Channel, address: 002a.6a0a.4caf (bia 002a.6a0a.4caf)
Description: ***Link to FI-B in R18***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 48052/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/8, Eth1/9, Eth1/10
Last clearing of "show interface" counters never
30 seconds input rate 104 bits/sec, 0 packets/sec
30 seconds output rate 1704 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 448 bps, 0 pps; output rate 1.08 Kbps, 0 pps
RX
    9070 unicast packets 288523 multicast packets 143322 broadcast packets
    440915 input packets 72677230 bytes
    7 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 36 CRC 0 no buffer
    2161727821137838086 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    62914 unicast packets 74425404 multicast packets 14434365 broadcast packets
    88922683 output packets 7182753461 bytes
    14 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
17 interface resets
===========================================================================
secondary# sh run int po2 mem
!Command: show running-config interface port-channel2 membership
!Time: Wed Feb 25 07:56:41 2009
version 5.2(1)N1(1b)
interface port-channel2
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/8
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/9
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/10
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
===========================================================================
secondary# sh run int po3 mem
!Command: show running-config interface port-channel3 membership
!Time: Wed Feb 25 07:58:30 2009
version 5.2(1)N1(1b)
interface port-channel3
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/3
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/4
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/5
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
===========================================================================
secondary# sh int po2
port-channel2 is up
Hardware: Port-Channel, address: 002a.6a0a.4d6f (bia 002a.6a0a.4d6f)
Description: ***Link to FI-A in R17***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/8, Eth1/9, Eth1/10
Last clearing of "show interface" counters never
30 seconds input rate 1752 bits/sec, 0 packets/sec
30 seconds output rate 1016 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 832 bps, 0 pps; output rate 496 bps, 0 pps
RX
    76009142 unicast packets 544440 multicast packets 228999 broadcast packets
    76782581 input packets 146179423660 bytes
    68566412 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    192711593 unicast packets 154928956 multicast packets 31420967 broadcast packets
    379061516 output packets 385914168860 bytes
    179761364 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
24 interface resets
===========================================================================
secondary# sh int po3
port-channel3 is up
Hardware: Port-Channel, address: 002a.6a0a.4d6a (bia 002a.6a0a.4d6a)
Description: ***Link to FI-B in R18***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/3, Eth1/4, Eth1/5
Last clearing of "show interface" counters never
30 seconds input rate 456 bits/sec, 0 packets/sec
30 seconds output rate 1784 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 456 bps, 0 pps; output rate 912 bps, 0 pps
RX
    75986748 unicast packets 490267 multicast packets 124569 broadcast packets
    76601584 input packets 146159548726 bytes
    68566413 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    192585042 unicast packets 190939131 multicast packets 13399201 broadcast packets
    396923374 output packets 386206869311 bytes
    179761514 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
24 interface resets
===========================================================================
We have removed vPC configuration as we are facing same problem as i said in my previous post
id     Port        Status Consistency Reason                     Active vlans
2      Po2         up     failed      vpc port channel           -
                                      mis-config due to vpc
                                      links in the 2 switches
                                      connected to different
                                      partners
Do let me know if anything else is required from my end
-amit

Administrator GW for NetWare and SLES

I now have one NetWare server that hosts MTA, POA, GWIA & WebAccess. Added a SLES 10 server that hosts the second domain MTA & GWIA2.
When I run C1 from SLES 10, I have to set the Linux mount point but that screwed me up when I run C1 from XP.
My question do users just use C1 on SLES once they have SLES server for GroupWise?
If yes, I will just VNC to the SLES console when I need to update GW.
Regards
Wilson

> When I run C1 from SLES 10, I have to set the Linux mount point but
that screwed me up when I run C1 from XP.
>
Try this http://www.caledonia.net/blog/?p=143
Danita - http://www.caledonia.net.blog

HANA administration guide for SP06 and certification refrences

Similar Messages

Maybe you are looking for