HANA auditing, what file types get created?

Hello,
I've read through the blog 'SAP HANA audit trail, best practice' by Frank Buchholz to create audit policies in HANA. Great blog and really appreciate sharing his experience. I've also worked with my hosting team to make audit configuration changes.
They've now asked me to check to see that the policies I've setup are creating records, and they've given me the path to check. The problem I have is I don't know what to look for. What file types are created in the OS SYSLOG by the audit policies? Would the files have the same name as the policies themselves? (self auditing, user SYSTEM, technical users, etc..) Does anyone have a sample with a screenshot to share?
Thanks for the help.
Cheers, Paul

This web site may be a good place to start:
http://www.fileinfo.com/filetypes/common
There are other places that you may search on the Internet that may help close the gap.
Ciao.

Similar Messages

What file types get classed as 'Movies' in Macbook Pro?

I'm creating space on my Macbook hard drive by moving movies onto a hard drive. I've moved virtually all of them over, and emptied the trash can. However a system storage report is still showing 59GB of movies. What else does macbook class as movies? Could it class podcasts .mp3 as Movies and count them towards the 59 GB?

This web site may be a good place to start:
http://www.fileinfo.com/filetypes/common
There are other places that you may search on the Internet that may help close the gap.
Ciao.

What file type and codec should I use for creating a file to send to have an HDCAM copy made

I'm prepping to take a video file of my film into a tape dubbing house to have an HDCAM copy of my project made. I'm using a PC, so Apple ProRes is not an option. What file type, codec, and settings do you recommend?
I was considering MXF, but the highest quality codec is XDCAM 50, which only does up to 50Mbps (I think). I believe HDCAM works at 140Mbps, so I would rather not give them a file that's compressed to almost 1/3rd that, especially since the source is a 5K 5120x2560 project. DPX maybe? I've never exported DPX before because it's not an option on my copy of CS6 - maybe that has to be downloaded separately? I was considering a Quicktim in H.264 at 140Mbps, but I think that would mean some serious rendering for the tape house. I would like to be able to offer them a few different options and see what they prefer, but this is an area where my knowledge runs thin. Any suggestions would be much appreciated. I'm hoping there's an industry standard that I can stick to.

DPX maybe? I've never exported DPX before because it's not an option on my copy of CS6 - maybe that has to be downloaded separately?
Your CS6 'Format' dropdown list should include DPX:
Among the options you listed, DPX would be my choice.
Be certain the dupe house can accept these files before proceeding.

Empty files are getting created at receiver FTP server

Hi Experts,
I have an Idoc to File scenario where I am sending an XML file to receiver FTP server.
Scenario is working fine but sometimes an empty file is getting generated at receiver FTP server.
I have already selected ignore empty file at receiver channel so issue is not within PI system configuration.
When I checked the message log I can see that almost all the files are getting created successfully without any issues, but
for some files/messages I can see that there are below error logs.
"Transmitting the message to endpoint <local> using connection IDoc_AAE_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections"
"Exception caught by adapter framework: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections."
And after there is again success message log in the same message and it creating a file successfully during that time stamp.
but the third party is sometime receiving empty file which I am not able to find in any trace or log (my file name is SD_timestamp.xml).
Can you please let me know what is the solution and what adjustments FTP server need to do in order to resolve this issue.
Thanks in advance.
Regards,
Rahul Kulkarni

The error you are getting that says "Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections" has probably nothing to do with the empty files problem.
I second Hareesh Gampa that you first should try "temporary file creation". You might also need to tell the FTP owner that he should only pick up files with that are written completely and that do comply with a negotiated file name schema. The temp file should have another schema of course then. He should not pick up just every file that is written. See here for details
http://help.sap.de/saphelp_nw74/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
HTH
Cheers
Jens

What file type needed to add behavior?

I have a logo created in Photoshop (I have the illustrator file as well), and I'm trying to animate it in Motion. However, when I add a behavior to the PSD file, nothing happens. What file types can be animated using behaviors in Motion?
Katie
PS-I know I could animate it using keyframes, but I'm looking to use the behaviors.

Euro spelling. It's the only thing people find interesting about Canadians.
No reason you can't put a Spin on a psd. Make sure you've assigned a spin rate to it. Look in the Inspector, click the BehavioUrs tab, and dial in a spin rate. See if that works. For Wriggle, make sure you apply to Properties (X,Y,Z, or combo of).

What file types iPhone support in emails?

Every time I get an email with a pic my iPhone says message is blank so it does not recognize the pic file. What file type does the pix need be ?

clarkkent26,
It is on page 51 of the User's Guide (July 16, 2008 revision):
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
iPhone displays most picture attachments (JPEG, GIF, and TIFF) inline with the text
in email messages. iPhone can play many audio attachments (such as MP3, AAC,
WAV, and AIFF). You can download and view files (such as PDF, webpage, text, Pages,
Keynote, Numbers, and Microsoft Word, Excel, and PowerPoint documents) attached to
messages you receive.
What format are the pictures you are receiving in?
Have you tapped them to download in case they were too large to automatically download over your current connection?
Thank you,
Nathan C.
Message was edited by: Nathan C - corrected quote formatting

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
    RFC_DESTINATION            =
*   FILE_MASK                  = ' '
*   LOCAL_DIRECTORY            = ' '
*   REMOTE_DIRECTORY           = ' '
*   OVERWRITE_MODE             = ' '
*   TEXT_MODE                  = ' '
*   TRANSMISSION_MONITOR       = 'X'
*   RECORDS_PER_TRANSFER       = 10
*   MONITOR_TITLE              =
*   MONITOR_TEXT1              =
*   MONITOR_TEXT2              =
*   PROGRESS_TEXT              =
* IMPORTING
*   LOCAL_DIRECTORY            =
*   REMOTE_DIRECTORY           =
*   LOCAL_SYSTEM_INFO          =
*   REMOTE_SYSTEM_INFO         =
* TABLES
*   FILE_LIST                  =
* EXCEPTIONS
*   CONNECTION_FAILED          = 1
*   INVALID_VERSION            = 2
*   INVALID_ARGUMENTS          = 3
*   GET_DIR_LIST_FAILED        = 4
*   FILE_TRANSFER_FAILED       = 5
*   STOPPED_BY_USER            = 6
*   OTHERS                     = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

.xel file not getting created

Hi All,
I am using 9.1.0.2 version. I archived the xel.log file as it was getting very bigger in size after stopping oim_server through Weblogic console.
I expected that after I start the oim_server all log files will get created automatically.
I see some log files got created when I started OIM application but not xel.log.
Should I create it manually or should it get created automatically?
Thanks in advance,
Manohar

Open log.properties file. You can see entry for xel.log file. Create this file manually and restart OIM server. Make sure you create it manually using the same user, using which you are starting servers.
Alternativley, in log.properties configure loggers and provide there path.xel.log in case entry for xel.log is not there.
regards,
GP

What file type is the video that comes with the ipad? Is there a way to transcdibe the audio from a 90 minute interview I just recorded?

What file type is the video that comes with the ipad? Is there a way to transcdibe the audio from a 90 minute interview I just recorded?

Thank you Menneisyys.
By transcription I mean being able to take what was said in the interview and have those words converted into written text. So I think your second option's a bit closer to what I was looking for.
The inelegant solution would be to buy Dragon Naturally Speaking software, load it up on another computer, stand my i-pad next to it, and have the words transcribed that way - an analog approach, as it were.
O course, I could just spend the next several hours tying up the interview, which is something I kinda hope to avoid.
Thanks again - Jim

Timer --what you type gets lost on other forms when timer expires

I am using a timer that works fine on this one form. The problem lies you move to a different form that does not have a timer and start typing and if the timer fires at that time while you are typing the focus moves to the form with the timer but it appears that the other form is still there infront.But what you type gets lost at the moment the timer expires.
I am using go_block on when timer expired form.
Any good way t handle this ?

I am using a timer that works fine on this one form. The problem lies you move to a different form that does not have a timer and start typing and if the timer fires at that time while you are typing the focus moves to the form with the timer but it appears that the other form is still there infront.But what you type gets lost at the moment the timer expires.
I am using go_block on when timer expired form.
Any good way t handle this ?

File not getting created in Target Directory..........

Hi All,
We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
Please Help
Regards,
Jayashri

>
Jayashri Rade wrote:
> Hi All,
> We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
i
Did you check the receiver communication channel in communication channel monitoring?
Are there any errors?

File not getting created at the Reciever

Hi All,
I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
I have refreshed the Cache in Integration directory. it is still not working.
I tried using a different Communication channel with the Mail adapter that is working fine.
I cant figure out what the problem is please help.
Many Thanks,
Neha

Hi! Neha,
Here i want to add some points :
Even I faced same problem in project....... then I followed this procedure...
My scenario is FILE TO RFC via FTP Server in file adapter.
Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
Most of the times I checked and I did successfully.
Main issue are due to:::
1. Check Queues in Inbound queue SMq2
2. Trace teh step by step in message flow in message monitoring that means check whether message flows
from a) Intergration Engine
b) Adapter Engine..
3. Check and trace the flow in Message monitoring in Run Time work Bench
4. Check Status of Receiver communication Channel in Communication channel Monitoring
5) Check whether Business Services are Scheduled in Availability Time planning or not
6 Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
Note:: All above needs to check only if development part is correctly configured.
Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
Thanks
Amar Srinivas Eli
Reward Points if useful

IDOC File target - file not getting created

I am using Realtime job for sending idoc from data services to sap. I am using idoc message as source, query and idoc file as target transform in the data flow. I have following settings in IDOC file as target
Idoc file : /tmp/costcentertest.txt
Idoc type: COSMAS01
Data store name: DS_SAP
Application server: saptest
When i send the idoc I can load the data into table or create the file in /tmp directory. After changing target to idoc file and entering the above settings i don't see any file getting created. I do see idoc was received from we05 and also show green in data management console.
I was checking if i have to change something or missing some steps.

Hi Satheesh
Check whether the order qty field is there in flat file or not. Second if the data is there then it is getting uploaded
in read the file or not. Subsequently in converted data . When the mapping is correct and data is getting populated
in read file and converted file it will get uploaded. Hope it will help you.
Thanks
Sushant

Web page video - what file type would you recommend?

I've stood up a web page for selling things (house, musical instrument, chipper-shredder, rent an apartment, etc.) and would like to have a few videos included. The plan is to save the video on the server and not use hyperlinks to places like vimeo and youtube. For one thing, vimeo doesn't allow a basic member to use their site for selling things.
A. Screen view size: I would like something, say, 2.5 to 3 inches high X whatever width the proportion would be (4:5 or 16:9), minimum.
B. Resolution: Most of what I've recorded is in 1440CBR but reducing the quality to keep the file size small is VERY important. I'm not looking for Full Hi-Def, just something that gets the message across.
C. It is very desirable for the visitor to be able to start viewing the video as soon after clicking on the hyperlink as possible. If they have to wait for a few MegaBytes to be downloaded they probably won't stick around. Also, there will be no advertising on my web page which should be nice.
D. The file format should be viewable by both Macs and PCs. Questions:
1. Is *.mp4 H.264 the most universal format?
2. Should I "Share" to a QuickTime format and assume the PC users will have QuickTime on their machine?
3. FCPx uses the "Share" menu in order to Export. What would you recommend for a Share setting (file type) so it will do what I would like to do?
Is there anything I left out that would be good to know???
Editorial comment: This has been a total struggle.
My resources:
FCPX 10.0.3 (have not updated yet. Waiting until the dust settles)
MacBook Pro Core 2 Duo 5,1 2.53 8GB memory Lion
MacPro 1,1 Lion
Passport drive: 1TB for video storage
MacBook White 1,1 (for email and Internet surfing) 10.6.8

Hi again,
I'm happy with the Audioengine 5 which I have on the computer desk about 2' ~ 3'
away so I'd call them 'near field'. You should have a shelf on your desk so the speakers are roughly at your head height. I'm also using a 12" Velodyne powered sub in this set-up which sits on the floor to my right.
here are some 'home' studio designs:
http://www.youtube.com/watch?v=OQ9oAhm8GsE&feature=related
http://www.youtube.com/watch?v=PdCQBs5wsyc&feature=related
http://www.youtube.com/watch?v=PKk1N6moZPc&feature=related
http://www.youtube.com/watch?v=X4Smei451dw&feature=related

Silent Installation - Respond file not getting created !!!

Hi,
I am trying to create a respond file by running the installation as follows
./runInstaller -ignoreSysPrereqs -record -destinationFile /backup/ORA_DOWNLOADS/9201.rsp
ignoreSysPrereqs is used because we have Sun Solaris 5.10 which is not in oraparam.ini.
I am installing 9.2.0.1 Please do not ask why 9.2.0.1 now.
Now the problem is my respond file is not getting created when I run the install. Does the respond file gets created after the installation is complete? I do not want to end up doing installation at one server without the respond file.
Please help.
Thanks,
Ankit.

Hm, you might be hitting a bug. Need to check my archive of historic Oracle events (means, I'll get back when I have looked through my notes in a few hours or more).

HANA auditing, what file types get created?

Similar Messages

Maybe you are looking for