HANA Cloud WebIDE username and password

Hi Guys,
When I tried to launch HANA Web IDE for Cloud from "HANA Instances" section in the cloud portal. it asked for username and password.
I tried to enter the cloud account username and SCN password but it didn't worked and said invalid login.
I had used the same credentials for connecting Eclipse to HANA cloud trial instance and it worked but didnt worked for WebIDE on cloud.
Please help. Thanks!
Regards.

Hi, Thanks for the link. I dont get any option in the HANA cloud trial on :
https://account.hanatrial.ondemand.com/cockpit#/
for creating user under "Development Tools" section under "HANA Instances".
What can be the issue ? Is there any other way to create user ?

Similar Messages

Reg : How can I get Username and Password in FTP Server in HANA

Hi All,
Any one can you please guide me....How can i get username and Password of FTP Server in SAP HANA?
Regards,
Arjun

Hi Arjun,
Are you looking for external authentication(External ID option) in HANA Studio instead of logging by entering HANA User and Pwd(which is internal)?
You can look for the following Security guide which will give you some insight on this.
http://help.sap.com/hana/hana1_sec_en.pdf
Rgds,
Murali

This is how I am supposed to contact to have my annual creative cloud membership refunded? I cancelled immediately upon seeing the charge and followed the instructions given and wound up here. Am I supposed to share my username and password with the for

This is how I am supposed to contact to have my annual creative cloud membership refunded? I cancelled immediately upon seeing the charge and followed the instructions given and wound up here. Am I supposed to share my username and password with the forum? Adobe, I am about to go social with my frustrations!

No, this is a public forum, as in user-to-user, so you should not share any private information here. You will need to contact Adobe Support by chat or phone, which is apparently getting harder and harder to do. Use the link below and choose the Still Need Help? option at the bottom in the blue area - in the section that opens take your pick of chat or phone.
Contact Customer Care

Trouble resetting i cloud username and password?

Yup the iPhone won't let you change iCloud setting on an iPhone. I resolved it by logging into Apple tech support afterwards and creating a new iCloud account with it's own username and password and I was back up and running. Not perfect, but once I reset all my links there was no perceptible loss of relevant data. See; there IS some life left in regular computers!
Glen Eldridge
Pointe Claire QC

apple.id.apple.com
theres a link for reset password and find apple id
Peace, Clyde

I have Iphone 4s, and the phone will activate itself again. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? I would like an answer as soon as possible ... Thank you very much.

I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.

It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list.

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Hi higi97,
How are you connected to the internet? Are you behind a particularly secure corporate firewall? Are you on Mac or Windows? Do you have any anti-malware software running on your machine that may be preventing applications other than your browser from connecting to the internet?
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

How to login owa using URL embedding username and password?

Hi, guys
Whether can users login O365 owa using url embedding username and password? Such as https://mail.mycompany.com/owa/....username=myalias...pwd=password... ?
I found a post http://blog.leederbyshire.com/2012/10/12/how-to-login-to-owa-2010-by-passing-credentials-in-the-url-querystring/
But it doesn't work.
Thanks.

Hi,
I don't think we can login Office 365 OWA using url embedding username and password.
The post you found may be a way to login OWA 2010. As mentioned in the post you provided, we need to use code to support with the URL
https://yourserver.yourdomain.com/owa/?un=yourusername&pw=yourpassword#sthash.cuiZTz5Y.dpuf, not just a simple
URL.
There is a location in the blog you mentioned:
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\logon.aspx
It's a location on a computer which installed Exchange server. As stated in the blog, we need to insert the code into the logon.aspx
file and then login OWA with the URL.
However, for Office 365 OWA which uses a cloud based server, we can do nothing to change the logon.aspx file for Office 365 OWA. That's why I don't think we can do the trick.
Regards,
Steve Fan
TechNet Community Support

Enter username and password before subscribing to an online (OneDrive) calendar

Hi guys,
I use microsoft outlook at work but I at home I have a macbook pro and an iphone. Therefore, I would like to see all appointments and events from my outlook calendar on my apple calendars as well.
I published the outlook calendar (.ics) on onedrive, which is microsoft's cloud service. Then I tried to subscribe to the calendar on my macbook. After entering the calendar url I get the following error message:
"There was an error subscribing to the calendar. You do not have permission to access the calendar at https://...."
Supposedly, I have to enter my onedrive username and password. But the programm does not ask me for it. I just get the error message.
How can I enter the credentials before the the mac calendar tries to subscribe to the online calendar?
Appreciate your help
cheers

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes

Setting up SafePoint on NAS, myCloud doesn't ask for username and password

I couldn't find an answer to this in the forum. I'm trying to set up a Safepoint on a Synology NAS. I have it configured so that you need a user name and password to access this share the safepoint should go to. When I try to set the Safepoint up in MyCloud it will find my NAS, but will then say "Retrieving Shares", but won't show any.I believe this is where I shoudl be asked for a username and password. Maybe the MyCloud can't see the share because I haven't eneter the credentials yet, but I don't know where else to enter them. I tried it in different browsers in case it's some sort of JavaScript problem, but it also doesn't work in other browsers either. For security reasons I'm not keen on having the share public, without user name and password. How can I create a Safepoint on my other NAS?

According to the WD My Cloud User Manual it appears that one has to select the NAS where they want to save the share first before they are possibly given a screen where they can enter in a user name and password. See Chapter 11 in particular Steps 3 and 4 under "Creating a Safepoint". Step 4 shows an example of the username/password screen. If the Synology NAS is not being detected by the WD My Cloud user interface then obviously there is either a problem with how the Synology NAS is detected on the local network or a problem with the WD My Cloud detecting specific NAS devices on the local network. It goes without saying that both devices should be on the same local network and have IP addresses in the same IP range. For example both should have IP addresses in the 192.168.1.x range. Edit to add: There are also the following relevent WD Support links:List of NAS drives validated by WD to work as a SafePoint backup for a WD NASHow to create a Safepoint backup of a WD My Cloud drive on another device Edit to add 2: Per this earlier thread that also discusses using a Synology NAS as a backup location for Safepoint, it appears you may have to enable the option "Enable Local Master Browser" in the Synology DSM before the WD My Cloud will see the Synology NAS on the local network.

Username and password for Adobe Edge

Username and password for Adobe Edge, where do I enter these?

With latest Edge Inspect v1.5
1. You need to Sign in with your Adobe ID in either 'Creative Cloud Desktop app or any other Creative Cloud application.
2. Launch Edge Inspect CC app. It should get you logged in automatically. Please click on the icon with letters "In" in your menu bar and verify that it has picked up correct Adobe ID.

Resetting username and password, but I have two iPhones using the same username and password. Can I delete the App Store user name on one device without affecting the other phone?

When we bought our daughter her iPhone I thought it would be a great idea for her to use my username and password for her App Store. As she is learning to download and search off apps, it appears that this May not hand been a good idea as the apps I have on MY iPhone, are showing as already downloaded and on our cloud. I'd prefer to change the username on her device, but in looking I am noticing that I will probably be deleting the username and password on both of our devices and then I will have to reset for both of us. Am I correct?

If you create an Apple ID for your daughter, signing out of the existing Apple ID with the iTunes & App Store on her iPhone will not change anything on your iPhone.
All apps include DRM protection which is tied to the Apple ID that was used to download the apps.
If she starts using her Apple ID to download apps, when there is an app update for an app on her iPhone that was downloaded with the current shared Apple ID, she will need to use that Apple ID and password to download the app updates.

Configure scp username and password

We used to load parts of the configuration for IOS switches from a ftp
server. To easily access those files when logged in on the switch ...
copy ftp://a.b.c/conf-file running-config
... we configured the FTP username and password:
ip ftp username ourusername
ip ftp password 7 123ourpassword456
Now, to enhance security, we would like to switch over to scp.
While we are able to transfer files via scp, we wonder
-why there is a significant delay when doing scp operations
-who there appear to be no commands like "ip scp username" or "ip scp
password".
Any hints appreciated.
Regards, Thomas

With latest Edge Inspect v1.5
1. You need to Sign in with your Adobe ID in either 'Creative Cloud Desktop app or any other Creative Cloud application.
2. Launch Edge Inspect CC app. It should get you logged in automatically. Please click on the icon with letters "In" in your menu bar and verify that it has picked up correct Adobe ID.

Reporting Services username and password prompting

We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
them for a username and password and will not allow them to connect even if the correct username and password is correct.
I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.

Hi bubba1984,
As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Single sign-on and different usernames and passwords

Hello,
I am building a Portal with WLPS 3.5 and WLS 6.0. I tried to get
information about the background of single sign-on.
I understand, that I need a Realm (i.e. LDAP Realm) to authenticate the
user for the first login to the portal (with username and password).
Now I would like to integrate my webmail-programm (to get emails from
Lotus Notes via Internet) as a portlet.
For my understanding the user has to authorizate to get access to webmail.
Therefore I create a ACL for webmail and this ACL is assigned to my
security Realm.
I would like the portlet to show after login the number of mails for the
specific user. But where are the username and password for webmail stored
and how are they received and forwarded?
I understand that my ACL included all users that have access to webmail
(i.e. all users). But I only want emails for the specific user.
Does WLS get all usernames and passwords while the first login? Do I have to
implement a algorithmen to get the specific username and password for the
requested resource in my portlet?
Has anyone solved a similar problem or can tell me where I can get more
information. I read the WebLogic Security document but I cant find a
answer to my questions.
Thanks
Lydia

Lydia,
I'm not an expert in this area, but I can give you a start.
As for single sign-on, there are different levels. For single sign-on across web-apps,
the servlet spec requires this (section 12.6 of th 2.3 spec) and therefore Weblogic
does this.
What you are talking about is single sign-on across back-end applications through
a web-app. BEA has partnered with Securant (just acquired by RSA) to provide this
kind of functionality. Browse to http://www.rsasecurity.com/products/ and look
at the ClearTrust product. BEA has also partnered with Netegrity (www.netegrity.com)
with their SiteMinder product. Neither is included in the Weblogic license. I'm
sure either vendor would be excited to explain how their product will solve your
problem if you give them a call.
As for where the username and passwords are stored, that is up to the realm. If
you are using the default WLPS RDBMSRealm, the username and encrypted password
are stored in the WLCS_USER table. If you are using LDAPRealm, they are stored
in your LDAP server.
Hope this was useful!
PJL
[email protected] wrote:
Hello,
I am using PersonalizationServer 3.5 and WLS 6.0 SP 2.
Now I try to unterstand the functionality of Single sign-on when a user
has different usernames and passwords for different applications.
Can someone explain where the usernames and passwords for a user are
stored (all in the LDAP-realm or a RDBMS-realm?) When a user access the
application how username and passwords are mapped? Or usernames and
passwords for all applications are the same and will be equalized?
Precisely I would like to get access to a mail-account for a specific
user
(webmail from Lotus Notes).
Thanks for any help
Lydia

How do i send the username and password to yahoo web page through url

how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

If you don't mind using a library, then download and use the Apache HttpClient library. It takes care of all these details for you.

HANA Cloud WebIDE username and password

Similar Messages

Maybe you are looking for