HANA - known SAP Controlling errors

Hello,
I am looking for (a list of) known errors in SAP-CO (Controlling) which occured because of the SAP-HANA database being used.
Any Information within this context would be welcome.
Thanks a lot in advance.
Thomas

Hi Vikrant,
the pass mark for the exam is 58%. However it may be different. The passing mark shown on your screen on the day will be the correct passing mark.
All the questions were scenario based which would involve high analytical skills and through understanding of the system integration. It would be difficult to tell any specific question. The questions carry different weightage. If you answer the questions with less weightage correctly than the questions with more weightage, you end up scoring less though you answer more number of questions correctly. and it is vice versa. Go through your syllabus and cources and try to concentrate on the topic areas which contain more weightage.
Moreover, the exam is not completely technical in nature. It tests a lot of analytical and problem solving skills required on the job.
Note:Please do not ask the questions or contents of the exam as they are confidential.
Hope this information helps you.
All the best for your exam!
Regards,
Vishnu.

Similar Messages

Error trying to activate HANA through SAP CAL

Hello,
I am encountering the following error when I try to activate AWS HANA through SAP CAL
"We are sorry, we cannot provide you with the solution due to the results of an export control check"
There seems to be a solution floating around but I can't seem to find the details.
Thank you in advance.
Jeff

Hi Stanimir, I am facing the same issue when trying to activate
1. openSAP - BI Clients and Applications on SAP HANA
2. SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7 BYOL
error message
"We are sorry, we cannot provide you with the solution due to the results of an export control check."
Can you please help me ?
Sharan
[email protected]

Sap Payroll error log report

Hi All,
We are developing Report on SAP Payroll log with the error message . Is any table exist in SAP where we can get the standard error message repositery and then convert it in the User freindly error message ?
Thanks
H

Hello hg,
Before developing report on SAP Payroll error log I suggest taking a look at below blog. There is a new functionality from SAP to improve payroll data validation and they are calling it "Control Center Add-On".
This is going to be a free add on for anyone who is on EHP7 and NetWeaver on 7.4 release. The general availability is June 2nd 2014.
Improve payroll data validation with SAP Payroll control center add-on
Hope this helps.
Thanks,
Hemanth Jamithi.

How to control errors in BPM

HI all,
We are developing a quite complicated BPM. We need to controle errors in File Adapter, just in case the comunication channel cannot write/read (for example with a wrong FTP account). In case of error we need to send an email. So we are trying to develop a module in the file adapter. We are not sure about behaviour of the BPM if one of the steps have an error. I mean the execution of the module will continue the BPM in case of error in the file adapter?
Many thanks in advance
Regards
Noelia

Hi Noelia,
CCMS is SAP Computing Center Management System. RWB is smoothly integrated with CCMS and CCMS alerts can be viewed thro' the Runtime WorkBench.
First configure CCMS in XI System:-
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
For Monitoring in the CCMS:-
http://help.sap.com/saphelp_nw04/helpdata/en/4d/6272376d3bfa2be10000009b38f8cf/frameset.htm
Go thro' this link for configuration scenario:-
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Hope this helps.
Regards.
Praveen

For Professional level certification aspirants in SAP Controlling module

Dear all Professional level Certification aspirants in SAP CO module,
I have recently passed the Certification test on SAP Management Accounting (CO) module in version ERP 6.0 EHP4. I have more than 4 years experience in SAP Controlling module.The following are some of my suggestions regarding preparation for the exam.
1. All the questions were scenario based. The exam tests expert level knowledge and real time scenarios in the module. The theoritical knowledge is not sufficient to clear the exam. Unless you have atleast 5 to 6 implementations in Controlling module, it is not advisable to give it a try.
2. Detailed knowledge of the system configuration settings about the various courses mentioned in the syllabus is required. One needs a clear understanding of Special costing functions, ERP integration, Transfer Pricing, Material ledger, New GL Parallel valuation, Planning and Budgeting fuctions in various components etc.
3. The exam tests in-depth knowledge about various integration aspects of Controlling module with other modules. The advanced master data functionalities of other logistical modules like MM, SD, PP, PM, QM, PS, CS, HCM is tested in detail.
4. Several methods of process and performance optimization of the system are also tested.
3. Some reporting aspects of BW and BI are also tested. The cross application aspects of the system are also tested.
4. The exam also tests the real time skills in preparing Blueprints, Business Process design and trouble shooting the system. Being knowledgeable about some of the processing errors and message classes will be of great help.
Hope this information helps you in preparing for the certification.
Should you need any clarifications, please post a reply to this thread and I will post answers.
All the Best!!
VS.

Hi Vikrant,
the pass mark for the exam is 58%. However it may be different. The passing mark shown on your screen on the day will be the correct passing mark.
All the questions were scenario based which would involve high analytical skills and through understanding of the system integration. It would be difficult to tell any specific question. The questions carry different weightage. If you answer the questions with less weightage correctly than the questions with more weightage, you end up scoring less though you answer more number of questions correctly. and it is vice versa. Go through your syllabus and cources and try to concentrate on the topic areas which contain more weightage.
Moreover, the exam is not completely technical in nature. It tests a lot of analytical and problem solving skills required on the job.
Note:Please do not ask the questions or contents of the exam as they are confidential.
Hope this information helps you.
All the best for your exam!
Regards,
Vishnu.

Remote control error 1891 after eDir upgrade?

- NW6sp3 two-node cluster (production server) houses read/write replica
- NW6sp3 utility server houses master replica and is a ZenWorks 4IR5 server
- The above servers reside in a small chunk of a much larger NDS tree
- Roughly 150 users with the 4.90sp2 client + Zen4IR5 agent
- ConsoleOne 1.3.6c with current Zen and Cluster snapins
Is there a known preferred method (or recommended method) of authenticating
to either read/write or master replica's? Here is my issue:
Prior to upgrading all three servers above to eDir 8.7.3.3, I was able to
use Zen to remote control my users's PC's. I WAS logging into the cluster
(read/write replica), just like all my users still do today. I began seeing
the remote control error "1891" which various TID's describe as an issue
with close proximity to a pure IPX server, and remote control fails. I have
no IPX running in my network currently. Opened tickets with Novell in both
their Zen and eDir teams.....no solution's yet. As I began banging around,
I found that if I force my login to the utility server (master repica in
this case) I now regain remote control ability to my users that authenticate
to the cluster (read/write). Also, if I intentionally login to a different
context of our tree (have a different admin create a temp account for me in
his context, say) first and not into my own context, I can remote control my
users in my context via ConsoleOne. Similarly, if I login to a different
context upon startup, then once the Windows desktop is loaded and I right
click the red N in my system tray, and login as myself into my own context,
I can remote control users. The issue arises when the first context I login
to is my own. Odd I say, odd.
I've done every flavor of dsrepair switches (-xk3, -a, timesync, etc) and
provided logs to Novell. Each dsrepair variant returns zero errors. I
believe the tree is healthy from what I and Novell can tell.
Attached are some logs from about a month ago when I started seeing these
remote control errors. Please note the time stamps on both the remote
controller and remote controlled machines.
I've posted this over on the eDir board as well since it feels like an
authentication issue to me....
Thanks for taking the time to look at this,
Mike
LOG AT CONSOLEONE MACHINE:
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Starting console
#(2884)# 11:45:47 AM 03/14/05 Normal : ZenGetLangValueFromNWLanguage: Trying
to load the resource DLL from Nls\ENGLISH directory
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Resource is loaded
successfully
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Inside LoadandParseCommand
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Connection successful at port 1761
#(2884)# 11:45:47 AM 03/14/05 NORMAL : InitClientInLoop() successful
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Before Authentication
#(2884)# 11:45:47 AM 03/14/05 NORMAL : After Authentication
#(2884)# 11:45:47 AM 03/14/05 CRITICAL : Authentication Failed:
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > Authentication Failed:
returning -1111
#(2884)# 11:45:48 AM 03/14/05 NORMAL : Out of process
LOG AT MACHINE ON FAR END OF REMOTE LINK:
RMErrorLog0.txt
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempting to read
policies...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Workstation Policy -
'EAG-WP:General:Remote Control Policy.EAG.CO.NW.CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: User Policy - ''
#(1484)# 11:45:48 AM 03/14/05 Normal : Only workstation policy settings
active...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Finished reading policies
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Unloaded modules...

Mike,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Error while printing (SAP spool error)

Hi,
I have configured a printer of type 'C : Direct Operating System Call'. On printing a page, an error occurs with the following log entries
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 1775: "A null context handle was passed from the client to the host during a remote procedure call."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Please. can someone help me out here.
Thanks!
Regards,
Angad

Ok I am upgrading from R/3 46C to ECC 6.0, on the 46c system the printers are configured as follow:
Device type          HPLJ4    : HP Laserjet 4 series
Spool server          sapprod1_PRD_00       sapprod1
Device class          Standard printer
Host spool access method C: Direct operating system call
Host printer
srtroot03.startek.com\srt-dc-c4-sharp
Host name          sapprod1
On the ECC 6.0 system the printers are configured as follows:
Device Type          HPLJ4    : HP Laserjet 4 series
Spool Server          srtsapeccdev1_DEV_00
Server Description
Host               srtsapeccdev1
Device Class          Standard printer
Host Spool Access Method C: Direct operating system call
Host printer
srtroot03.startek.co\srt-dc-c4-sharp
HostName          srtsapeccdev1
The 46c system prints just fine, on the ECC 6.0 systems; I can not get the printers to work. I have made sure that the hosts file on the ECC server has the printer host address, and I get the following error back:
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 5 [
srtroot03.startek.com\srt-dc-c4-sharp]: "Access is denied."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
The access to the Printer Host is wide open, what do I need to do to resolve this issue.

Sap-plugin error when deploying a par file

Hi,
We are getting sap-plugin error when ever we are trying to deploy the application to the portal.Even after restarting the server the problem is not getting solved.
The application we are trying to deploy is perfectly alright as we tested the same earlier.
Can any one provide some inputs to solve this issue.
To add some more points
In brief ,we are not able to deploy our Portal applications . It is giving us error like this
NFO: Detected Portal Archive File: com.abc.par
INFO: Deployment failed - exception caught: Application upload failed: com.abc.par - more detail at: /usr/sap/POD/JC30/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.abc.par.log
We got this error many times , but after some time , when we restart the portal it works,
this time it is not working even after I restarted the server many times

hi all, i have same problem with upload of .par file, it doesn't work both from the portal and from the NWDS,
here i post first part of log file:
this is   sap-plugin.log :
[16.05.07 / 13:05] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Response: <?xml version="1.0" encoding="utf-8"?>
<query-result><info><type>1</type><message>Detected Portal Archive File: test.par</message></info><info><type>1</type><message>Deployment failed - exception caught: Application upload failed: test.par - more detail at: C:\usr\sap\SWB\DVEBMGS02\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\test.par.log</message></info></query-result>
this is test.par.log :
2007-05-16_12-03-10
Application upload failed: test.par
com.sapportals.portal.prt.runtime.PortalException: [ApplicationRepositoryService.putArchive] archive: test.par
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:328)
     at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:813)
     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)
     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)
     at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:700)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)
     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.pcd.pl.PlRuntimeException: unexpected SQLException
Cannot assign a zero-length byte array to host variable 18.
     at com.sapportals.portal.pcd.pl.PlFactory.handleUnexpectedSQLError(PlFactory.java:2490)
     at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:652)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1360)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1118)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1076)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:846)
     at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:185)
     at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:188)
     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:244)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:133)
     at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:500)
     at com.sapportals.portal.pcd.gl.PcdGlContext.bind(PcdGlContext.java:425)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.bind(PcdProxyContext.java:426)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebindInt(PcdProxyContext.java:446)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:460)
     at com.sapportals.portal.pcd.gl.PcdGlContext.rebind(PcdGlContext.java:1317)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:501)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:663)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:668)
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.updateObject(ApplicationRepositoryService.java:717)
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.storeApplication(ApplicationRepositoryService.java:389)
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:306)
     ... 34 more
Caused by: com.sap.sql.log.OpenSQLException: Cannot assign a zero-length byte array to host variable 18.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.jdbc.common.dispatch.BlobHostVariable.setBinaryStream(BlobHostVariable.java:143)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setBinaryStream(CommonPreparedStatement.java:776)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setBinaryStream(PreparedStatementWrapper.java:401)
     at com.sapportals.portal.pcd.pl.AttributeHeadersTable.storeAttribute(AttributeHeadersTable.java:431)
     at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:248)
     at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:541)
     at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:616)
     at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:640)
     ... 54 more

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO AS T0 LEFT OUTER JOIN
                      VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
     OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO T0 LEFT OUTER JOIN
                      VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
     OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

SAP XI error: 401 Unauthorized (When calling from Enterprise Portal)

Hello Friends
I am trying to access an SAP table from IVIEW of portal via XI. Using the latest and greatest version of all SAP Components. (We just installed couple of weeks back).
I keep getting the following error message when I try to access data from IVIEW of portal.
"SAP XI error: 401 Unauthorized"
What may be the reason? If some one can help me, I would really appreciate it.
Thanks
Ram

Thanks Srinivas for your help.
I tried accessing the URL directly and got the error message
"User Credentials not passed via Enterprise Portal. Please contact your Administrator"
Any more suggestions?
Thanks again
Ram

Elicense control error

Hello all. Everytime i try to start logic without my nexus license dongle i get the eLicense control error and logic refuses to start. The problem is that I do a lot of work in logic on the plane and in hotel rooms and don't always have my license key handy. I should still be able to work on that session and just not access those particular plug ins unless i have the key installed. I don't see why i cannot even get the session to open. Does anyone know a workaround for this. I am buying the uad satellite bundle and im sure im going to have the same problem with this. But my main goal is to be able to open any track and work on a particular part weather or not my license is plugged in. This is how it is in ableton. The session will open but i just cant access nexus or UAD. PLEASE HELP

Boyd Ostroff wrote:
I wonder if you could setup two separate accounts on your laptop and only install nexus on one of them? Not sure if the nexus software is installed into the user library or a global location, but seems like it would be worth a try.
Excellent suggestion....
If that doesn't work the OP could just move the Nexus AU out of the Components folder before starting an "on the road" session.
That would be in Root/Library/Audio/Plug-ins/Components
Logic never did have graceful exit strategies... if it finds something amiss it often tends to freeze or crash.

Transaction Control Error

Hi,
i am getting "Transaction Control Error" in newly created Client while executing any tcode. can you please give the solution for this.
venkat

Hi,
i copied from 000 client to new client. it was successfully completed. After that if execute mm01 or mm02 transactions this type error i am getting. Can you please give the solution..
venkat

Error when re-starting an SQL Server Instance from VBA - [SQL-DMO]Service Control Error: Access is denied.

Our Application needs to have the use of the [Named Pipes] and [TCP/IP] Protocols. To save our Users the hassle of having to enable them manually our application has always done it for them and then stopped and restarted SQL Server. However
since the advent of Vista and Windows 7, the restart stopped working. We solved the problem by detecting the failure to re-start and giving Users sufficient instructions for them to do it themselves. Since this only occurs during installation on
the Server, this approach has not been too much of a hassle. However we would like to tidy this up if possible. This the VBA code that is causing the problem:
    obj_SQLServerInstance2.Start _
        g_SQL_UseWindowsAuthentication, _
        SQLServerInstance, _
        UserName, _
        Password
This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Does anyone know how to resolve the problem?

This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Hello Brian,
Under Windows 7 you have to run the VBA script with admin permission, a normal user don't have permissions to start/stop services.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How do I fix "could not be added to AVI control" error?

How do I fix "could not be added to AVI control" error? I get this error when loading a file via the Clip/Insight Player.

Hello acacord,
are you working with an AVI using the Indeo codec? On Windows XP, after
installing the service pack 2, files using this particular codec cannot
be played if they are placed in the temporary Windows folder. This is
due to Windows restrictions, not to CLIP.
If you run a cip file in CLIP, it would unpack all its content
(including the AVI) to that temp folder and play the video from there -
which is not possible.
With the current version, all CLIP examples are using the Radius codec
instead ov the Indeo. As you can see ich you make a test with one of
the example projects - it is working well.
So in your case, just use a different codec than the Indeo.
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

HANA - known SAP Controlling errors

Similar Messages

Maybe you are looking for