HANA perspectives missing in Hana Studio

Hi all,
After installation of the Hana Studio on a citrix server, for some reason none of the Hana perspectives are visible,
Has onyone experienced this before or know how to solve this?
i had this behaviour on my pc as well but after a retry it was all fine
i am using the installation from patch 23
Kind regards,
Peter Joris

Hi Peter,
first of all, revision 25 is out also for HANA studio.
The display problem is yet unknown, but have you tried to get the perspectives to display via
WINDOW -> Open Perspective -> Administrative Console/Modeller ?
regards,
Lars

Similar Messages

My quotation pipeline role missing on HANA

Hi everyone,
Recently I've been trying to install the My Quotation Pipeline fiori application. I have already installed a HCO_HBA_A_QTPL_S 100 component on HANA XS using hdbalm:
However, the sap.hba.apps.qtpl.s.roles::qtpl role it is missing, and I am not able to assign it to a user as it is said in the configuration section.
I guess, that I have to install something additional, but what?
Best regards,
Tomasz

Hi,
Finally, I managed to find out why the specific role wasn't visible. It was due to error during installation of the HCO_HBA_A_QTPL_S component and objects were not active.
Anyway, now when I had assigned a specific application role I am able to run it, but there some privileges are missing.
Logs from the console:
I will be very grateful for any help!
Tomasz

Use of other HANA perspectives

What are the other perspectives (beside Adm Console and Modeler) used for? Are there any documentations related to them?

Hi,
Basically there are 3 main perspectives
1.Modeler - Mostly targetting the data modeling user
2.Administration Console- Focusing the administrator role who can give the access,user management and system management
3.Life Cycle Management - Whenever there is a need for upgrade of HANA,this perspective will be used
The following link will guide you for most of the informations you required
http://help.sap.com/hana_appliance/
Rgds,
Murali

Unable to connect to HANA One instance from HANA Studio

I am trying to add my HANA One instance to my HANA Studio and keep getting an error "The system is not reachable, the login data could not be considered". Any pointers on how to troubleshoot this would be much appreciated.

Hello G,
We understand you situation very well. We are expecting a follow-up on the status based on our suggestion made within less than 1 hour after posting the issue even during weekend.
As far as your SAP HANA One Developer Edition, the suggestions made here for productive uses may not be relevant. Please follow-up appropriately posting and following SCN from where you initiated HANA One Dev Edition as SCN is heavily used for Dev Edition..
In either case, you should not keep any instance running till you can use it. We strongly recommend to stop the instance while you are not using it or between troubleshooting.
@Gaurav,
We will appreciate an update here. We like to see you are start using SAP HANA One for productive uses immediately.
Thanks and regards,
Swapan

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

CMS Wizzard - Composite Application DC type missing in Dev studio

Hi,
I have created an application skeleton using the CMS wizzard, however when it comes to using the software component in Dev Studio, the Composite Application DC type is greyed out when I look at the component properties.
If I expand the greyed out DC type there is an odd red icon with a question mark next to the following imports:
bi/mmr/api
bi/mmr/mmrbuild
bi/mmr/mmrlib
caf/core/metadata
caf/metamodel/mmr
I presume this is because I'm missing a dependent sca file for the software component, has anyone had a similar problem and worked out what software dependency needs adding? Is there a way to create a Composite App through the wizzard?
Many thanks.

Hi Jon
We are currently experiencing the same problem. Did you find a solution to this?
I have tried adding dependent components MMR_SERVER and CAF amd CAF-MF, but this does not seem to work.
The import fails.
Kind Regards
RD

How to import Hana exported package into Hana cloud portal?

Hi All,
Am new to hana cloud portal, But I have followed open sap courses,
We have developed hana project in hana server using eclipse.
Now this project we want to move into hana cloud portal,
I have exported the project and views into delivery unit and schema exported separately.
We have account in the cockpit(https://account.hana.ondemand.com)
In this i want to import the project, Please provide me the steps to follow.
Is there any possibility without adding system in the eclipse, I want to import the project in the cockpit itself.
Thanks,
Preethi

Hi Preethi,
The right place to post your question would be SAP HANA Cloud Platform Developer Center.
Regards,
Ifat.

Legacy instruments missing ? Logic Studio 8

When i try to load the Alto or Tenor Sax from Legacy Insruments library I get the following message -
Audio file “TESLNOMA2X01” not found! - Anyone else get this ? I installed all Audio / Jam pack DVD's.
Running Macbook pro core duo 2.33 OS 10.4.11
Logic Studio 8

Hi,
in case anyone else has similar issue thought I'd share the following;
I've since found a solution for my problem thanks to some knowledgeable person at Logic forum.
It turns out I needed to repair my disk permissions and having done that I ran the following in terminal;
sudo chmod -R 777 ~/Library
It sets the library permissions for everyone on the computer but as its just me on my machine that's not a problem and now everything is working as should be.
Recent list now updates and preference files update!
Best,
ateight.

Tcov Code Coverage Libraries missing from Sun Studio 12!!!

Hi,
When I try to collect coverage statistics using the -xprofile=tcov I get the following message
f90     -xprofile=tcov -w0 -C -c ./intfaces.f90 -o ./scovintfaces.o
f90     -xprofile=tcov -w0 -C -c ./gcovsrc.f90 -o ./scovsrc.o
f90     -xprofile=tcov -w0 -C -c ./gcovdrv.f90 -o ./scovdrv.o
f90      -xprofile=tcov -w0 -C -o ./five82scov.exec ./scovdrv.o ./scovsrc.o /usr/lib/libg2c.so.0
f90: Cannot find /opt/sun/sunstudio12/prod/lib/bb_link.oThis file does not seem to be within the packages provided in sun studio 12!!! (linux/x86 editon). I then decided to get the latest patches and now I get the following message
f90     -xprofile=tcov -w0 -C -c ./intfaces.f90 -o ./scovintfaces.o
/opt/sun/sunstudio12/prod/bin/f90comp: error while loading shared libraries: libyabe.so: cannot open shared object file: No such file or directoryThis file is also nowhere to be found!!! Have the sun developers decided to leave out crucial libraries?!?
Regards

This is not very nice from the compiler, but at least it is documented here:
http://developers.sun.com/sunstudio/documentation/ss12/mr/READMEs/fortran_95.html#limitations
Quote:
The -xprofile=collect and -xprofile=tcov options should not be used when building shared libraries on Linux.

InDesign CS4 type library Com reference is missing in visual studio 2008 in windows 7

hi
i am trying to create InDesign CS4 COM object using vb.net as
indApp=CeateObject("InDesign.Application.CS4")
i checked in the visual studio 2008 ,and tried to add indesign reference but the reference is not available in the VS references Com section
i tried it by adding the Indesign CS4 DLL by from local drive but still it is not working
i have two systems one having OS windows XP and another is having Windows 7
the problem is in the system having windows XP my program is running fine but same program is giving an exception in the windows 7
i m getting the exception message as:
Unable to cast COM object of type 'System.__ComObject' to interface type 'InDesign.Application'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{ABD4CBB2-0CFE-11D1-801D-0060B03C02E4}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
please help me

Hi,
Did anyone solve this issue?
A few years ago, I've wrote a small app that uses Indesign on XP. All these years it worked great. Now, we have migrated to windows 7 and the problems start. I've tried running both Indesign as my own app as administrator without any improvement.
Why are these problems happening in Windows 7?
Kind regards
John

ERROR - About EP Perspective in SAP Netweaver studio

Dear All,
Whenever I try to set the server settings for enterprise portal in Windows - > prefrences I get an error
'Unable to create the selected preference page'
Reason
Plug-in com..sap.ep.connectionManager was unable to load class com.sap.netweaver.ep.ui.preferences.PreferencePage
Due to this I am not able to upload any PAR from studio to EP.
Regards

Hi,
I cannot see your problem (just trying to add those preference settings). What version do you have?
Regards,
Benny

WCF Data Service Template Missing in Visual Studio 2013

I've installed WCF Data Service 5.6.3 but I still can't see the template when I try to add a new item. I can see the template in VS 2010 but not 2013.

Hi,
In which kind of project did you create WCF Data Service? It doesn't support some kinds of project.
Make sure you've installed it correctly. You could try to install it from Nuget.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HANA Studio: Installation and usage

Hi,
I am currently retaking the the introduction course in the HANA development and wonder about the HANA studio GUI presented there.
Installation:
I see on the HANA Dev site that there is the Studio and the Client. Do I need both for installation? Or is in the studio already the client provided? If not, why are they separated? (instead of combined?)
Short: What is finally required for installation?
Plus in the intro on the second unit it is mentioned that I have to install as well some regi (???) client to access the HANA repositories. Is this still true? Also reg. config I see in the 1.0.80 version not the config-items as mentioned in the video. So, do I need them? resp. where to configure them?
Usage:
And last but not least I wonder about the statement that the System View is not much used. Better use the Project Explorer (or so). According to the video you could create your own files with the extensions you like and they will automatically associate with the proper editor. Is it really that in daily business the System View is hardly used? One creates his/her own files with appending the appropriate file ending?
roland

>Since everything is done in the System View (e.g. create an Analytic View) where is it stored?
It doesn't matter if you use the Systems View or the Project Explorer; the content is stored the same place/way on the server. When you save/commit in either tool the content is always stored in the HANA Repository. The HANA Repository is just a set of database tables (_SYS_REPO schema).
>Before activation and after?
You shouldn't really go picking around in the Repository database tables, but if you are curious before activation the content is stored in _SYS_REPO.INACTIVE_OBJECT and after activation in _SYS_REPO.ACTIVE_OBJECT.
>Therefore that I cannot switch forth and back with versions of a View, correct?
If you use the project explorer you can just access the version management from the History tab and restore or compare from any previous versions:
>When I follow your video, than I create first a package in the System, which will be updated in my repository view. Checkout, checkin, compare old vs. older version, etc. can only be done in the Repository View, correct?
You have to keep in mind that the Systems view was created before we really had a developer perspective in HANA Studio. It was design with Information Modeling (view creation) only in mind. Therefore in SPS05 when we added the developer perspective and many of the new development artifacts we introduced the repository and project explorer view. When you create a package via either tool - they are the same thing. However if you want to then work with a project or any of the newer development artifacts you must check out the project from the repository view and edit the objects via the project explorer.
>Is it also possible to check (resp. compare) if something in a folder structure was changed?
Changed by someone else after you checked it out? If so, you usually would just do another check out from the project. Otherwise you will find any conflicts when you activate.
>In SPS08 the project is automatically connected with the Team and I don't have to do anything further, like Share. Correct?
Correct. We continue to make usability enhancements and the automatic sharing of a project during the project creation wizard is one of those. We will continue with such enhancements in SPS09 - allowing the project creation wizard to also general some of the basic development artifacts (like xsapp and xsaccess) for you. You might be interested to know that we have a new openSAP course for HANA development starting at the beginning of October and it is based upon SPS08 and will showcase these improved workflows.
>For SPS08 is there an easier way to create the .xsaccess-file?
There is a new wizard that inserts a template content. It certainly shouldn't lock up your system to choose the wizard. Not sure why that would happen. You can also use the HANA Application Lifecycle Management tools and its Application Creation Wizard to generate the initial development objects with template content. For the complete list of all available options, please refer to the developers' guide on help.sap.com.
>Editor = at least two tabs, one with drop-down lists and one with text-files
Not within the Studio. After you have created the XSACCESS File it can be 'configured' via the XS Admin web interface. Not all options of the xsaccess file can be set from the XS Admin tool yet, however. Today you can mainly configure the authentication options.
In SPS09 we will extend these options to also include the CORS and Headers configuration:
>Does this mean, the files are automatically synced?
They are automatically committed upon any create or save operation. Originally in SPS05 you had to always choose to commit via a context menu. To improve the user experience we changed this to automatic. The manual commit menu option is still there (team->commit from the right mouse context menu). However it is really only needed if something goes wrong with the communication to the server or if you were developing offline and then want to force sync with the server at a later time.
>Since in the connection no specifics reg. server, port is provided I wonder how the magic is done
No magic. The XSJS code executes within the database. There is nothing for it to connect to since by its very definition it is always running within the database. The XS server isn't a separate application server connecting via JDBC or ODBC. The main point of XS is that it is a light weight application server fully embedded within the database.

Limitations while conected HANA universe to design studio

Hi All,
Previously i have created number of dashboard reports in Design Studio using BEx quires. Recently we moved to HANA database. From HANA we have universe connected to Design studio. Here we are facing some problems. It is not accepting huge data. when i tried to see the data in edit initial view, it is showing "data is too large ". looking to know about if any limitations and performance tuning while using HANA universe to Design Studio.
Kind Regards,
Sud.

Hi - please see the SAP Help page 68
http://help.sap.com/businessobject/product_guides/AAD14/en/ds14SP02_user_en.pdf
It says "Maximum Result Set The result set has a fixed limit of 5000 rows or 50000 data cells. If either limit is exceeded, no data is displayed"
Please also search SCN before posting per the SCN rules, as this has been asked before.
Thank you

Which ports are needed for SAP HANA Studio - HANA DB communication?

I want to connect SAP HANA Studio to a HANA instance. The HANA instance number is 40.
The SAP note 1592925 states that the ports 5$$13/5$$14 and 3$$15 should be open to allow communication between the HANA Studio and the HANA database. I even see the instance in the HANA Studio, but I cannot administrate it and the HANA studio gives this general "I don't want you to know what the error actually is" message:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-16 14:01:40.627
!MESSAGE [HDB hostname 40 (SYSTEM)] Error on refreshing system
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2012-01-16 14:01:40.627
!MESSAGE SAPControl request failed
!STACK 0
com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
     at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:439)
     at com.sap.ndb.studio.sapcontrol.SAPControl.collectProperties(SAPControl.java:466)
     at com.sap.ndb.studio.sapcontrol.SAPControl.open(SAPControl.java:297)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.getSAPControl(SAPControlManager.java:108)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.getSAPControl(SAPControlManager.java:81)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.needCredentials(SAPControlManager.java:57)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:102)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:63)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:75)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
     ... 11 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
     ... 13 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     ... 14 more
Do I need to open any other ports to make HANA Studio work with HANA DB?
Regards,
Mark

Hi Mark,
The HANA Studio connects to HANA DB Instance with JDBC on port 3<Instance number>15.
For your HDB with Instance Number 40, the port would be 34015.
HANA Studio will automatically assign the JDBC port number when you assign the instance number when you add new system.
Looking at the error message that you posted:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-16 14:01:40.627
!MESSAGE [HDB hostname 40 (SYSTEM)] Error on refreshing system
It looks like the hostname entry was not entered correctly (you might have entered "hostname" value when adding the system in HANA Studio).
Here is an example of correct log entry on DCA database instance on hanasvr-01 server with Instance number 00:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-10 13:55:23.598
!MESSAGE [DCA hanasvr-01 00 (SYSTEM)]
You may want to delete and re-add your HDB instance in your HANA Studio.
Regards,
Ferry

HANA perspectives missing in Hana Studio

Similar Messages

Maybe you are looking for