HANA STUDIO SPS06: IMPORT ERROR FOR A SCHEMA

Hi HANA Experts,
I have a problem for exporting and importing data  for a schema.
For exporting I used interface of HANA Studio SPS06 , while importing I used command
IMPORT "SFLIGHT" ."*" AS BINARY from "/tmp/SFLIGHT" WITH RENAME SCHEMA "SFLIGHT" TO "SHANA"
I am getting the error as
SAP DBTech JDBC:[2048]:column store error: table import failed: [30134] out of memory
Kindly suggest. Thank you
Regards

PrPro will come to you. It has fewer "automations," and "big-button" solutions, than PowerDirector (and Magix and PrE), but with that comes power!
It is the same with Encore vs the limited authoring capabilities of PowerDirector, Magix, Roxio and PrE. Again, more hand-work, but oh, so much more power!
Can you tell that I am a control freak, and do not mind getting my hands dirty to access the power?
There are a few things that Encore cannot do, that programs like Sonic Scenarist can do, but there are usually workarounds, either in the design, or in the implementation, that will get you "there," or close.
I strongly recommend that any new user to Encore purchase and read Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. That book covers everything that Encore can do, with two current exceptions - Adobe Dynamic Link (CS4 version) and BD authoring. Both of those were added after the book and EncoreDVD 2.0, were released. However, the Help files cover both of those newer additions well.
Along with the fundamentals of Encore, Jeff covers all sorts of tricks and tips for getting more out of Encore, than the DVD-specs. actually allow. Obviously, he cannot break those rules, though he CAN help you create the illusion that the rules HAVE been broken. The user will swear that they just saw things, that are impossible, based on the DVD-specs., which are very limiting. Hey, it IS "smoke and mirrors," but if the user is fooled, you have succeeded, right?
Good luck, and when you get around to adding some "tricks" to your DVD-Videos, post back. I'd suggest a new thread, so that other users can benefit from the new title, and so that users know that this is a new question. You will find that there is not too much, that someone here has not done, one way, or another. Oh, there ARE some limitations, where there is no good way to "bend" those DVD-specs., but you'll be surprised at what one can "bend."
Happy authoring,
Hunt

Similar Messages

  • Error when used hana studio to import Delivery Unit

    HANA version:1.00.80.00.391861
    HANA studio version:1.80.3
    Plantform :SUSE Linux Enterprise Server 11.2
    I meet a error when used hana studio followed that steps to import Delivery Unit:
    Launch HANA Studio 
    Select your HANA instance
    On the Quick launch page, choose Content -> Import
    Now Select HANA Content -> Delivery unit.
    Choose Next
    Select the server, browse the Service DU (Service DU on server: SYS/global/hdb/content): HCO_INA_SERVICE.tgz
    Who can help me what shoud i do.
    thanks.

    I has Resolved.
    You must set the OS directory privileges which has listed on the picutre  to 777 by 'chmod' command ,
    if it's 775 or  others.

  • HANA Studio: Filter more than one catalog schema

    Hi,
    Simply a usability question: Is it possible to filter a list of schemas in the catalog folder of HANA studio. I see only, that I can filter one pattern of a schema name. I would like to reduce the visible schemas in the catalog folder according to an arbitrary free to be chosen list of schemas.
    Did I miss something?
    Thanks,
    Ingo

    Hello Ingo Peter,
    Very interesting question but I really doubt if it is possible!
    Even giving 2nd Schema name will overwrite the earlier filtered Schema
    BR
    Prabhith

  • ABAP in HANA Studio via WTS, error in defining ABAP Project

    Dear Colleagues,
    I managed to configure the ABAP Development Tool in SAP Hana Studio in my WTS.
    But as I want to add a new ABAP Project, it ends with an error saying:
    Logon to system FA7 failed (SNC Library not found; environment variable "SNC_LIB_64" not defined, fallback location does not exist: "C:\Program Files\SAP\FrontEnd\SecureLogin\lib\secgss.dll" )
    As you know there is not C:\Program Files\... path in WTS.
    Could please advise,
    Thank you and best regards,
    Steve

    Hi Steve,
    As i know, it is beacuse your ADT is 64bit. Ca you quickly check the following.
    1. Open your SAP Logon in WTS
    2. Open the properties of your ABAP System added
    3. Deactivate the Single Sign on (Uncheck the check box 'Activate Secure Network Connection' on Network tab)
    4. Now on your ADT add the ABAP Project .
    This should work.
    As of now, 64 bit ADT does not support adding ABAP Projects with single sign on.
    Thanks
    Prakash K

  • File Import Error for mpeg-1?

    When attempting to add mpeg1 files to render queue, AME 5.0.1.0 displays a messagebox "File Import Error" "Error while decompressing the source file".
    These mpeg1s are direct from my Sony DSC-N2 point-&-shoot. GSpot identifies them as mpeg1 video codec & 32khz,64kbs,mono layer2 audio. VirtualDub has no problem with these files.
    Any ideas?  I'd upload them here but as uncompressed mpeg1s they're 41 & 19MB.

    Hi Peter,
    Thanks for posting the clip. I tested it and was able to reproduce your results.  In Adobe Media Encoder 5.0.1, installed as part of CS5 Design Premium on Windows 7 64-bit with QuickTime 7.6.9, encoding the file to F4V (or FLV or H.264) was very very slow.  It looks like AME is duplicating every frame many times over, which was confirmed when I stopped the encode and examined the partial file.
    The problem did not occur, however, on a similar computer with CS5 Production Premium installed.
    The reason, if I understand the inner workings of AME well (which I like to think that I do), has to do with which codecs are installed with AME, which is dependent on which Adobe products you have installed.  Only Production Premium, After Effects, and Premiere Pro include the MPEG codecs necessary for AME to decode MPEG files natively.  Design Premium, Flash, or any other Adobe product that installs AME do not install the MPEG codecs.
    In theory, AME shouldn't be able to read your MPEG file at all.  But when QuickTime is installed AME has a rule that allows it to ask QuickTime if it can decode certain types of files if AME can't decode them natively.  In this case, yes, QuickTime can read this MPEG file.  So it's actually QuickTime that is decoding the file for AME, and then AME takes those frames and encodes them to the output format.  If you didn't have QuickTime installed, AME would just produce an error when you tried to open the file.  (I confirmed this by uninstalling QuickTime; this is also why your previous bad QuickTime install was generating the error you first posted about.)
    The problem here seems to be that QuickTime and AME aren't talking together very well.  Either AME isn't requesting the frames correctly, or QuickTime isn't handing over the frames correctly.
    The best workaround for you will be to use a different program to transcode your MPEG files to a different format.  Either directly to F4V, or to an intermediate format (QuickTime, AVI, other) that you can then import into AME so it can properly transcode it.
    Or you can take Jim's suggestion and shoot with a camera that produces files that are more friendly to editing.  MPEG files are notoriously difficult to decode efficiently for editing, and the wide variety of implementations of the MPEG guidelines makes it nearly impossible for editing programs to be compatible with every single device that can write MPEG files.
    I do have some good news: this problem has already been resolved for a future release of AME; my test of an internal build did not reproduce the problem.
    -=TimK
    -=Adobe After Effects and Adobe Media Encoder QE

  • Import error for .prproj files

    so i've just touched adobe mc CS4 for the first time, my church is allowing me to use the studio/editing room while not being used during the day at certain times. i am compiling a dvd of my wedding to make it more proffessional than the previously made vesion (which looks very amateur with a basic template menue, and so on). i plan to use some flash on the menus and maybe even include an easter egg as well. anyway, with the other program i just imported the media from the camera (which is an HDD camera that records everything into .mod files) i've had a .mod converter for quite some time so those are already converted.i saved them on an external HDD, i created a folder on the computer and just dragged and dropped the folder onto there.
    anyway, with my old program (cyberlink power producer/director) i'd just import the media into the editor, make the edits and cuts and save the project. then import the project into the author program to make teh menus and burn it. when i first pulled up the program to get acclimated to it, i decided to run through a very quick dry run of a full start to stop dvd burn of a very small video. i did a short series of clips and edits in Premiere (the oevr all project is like 6 minutes long). saved the project, and when i go to import the project into Encore it reads "the software that's used to decode the media is not available on this  system""adobe encore the software that's used to decode the media is not  available on this system. installing the correct decoders for the file  you are working with may help correct the problem."
    i can encode the project as an mpeg, and it imports just fine. i can import the individual clips that make up the project into encore, they work fine as well.but if i import the .prproj file, it gives me the error. so whats the deal? can you just drag and drop these files in like this? i'm just trying to keep from constantly encoding the files after 3 encodes, i'm affraid the quality of the video will suffer too much degradation, so i'm trying to get it to where i can just import the project, and then at the end burn the project to dvd.
    i figured it better to ask on here, this way i look like a fool anonymously, and not look like a fool to people i actually know. heh.

    PrPro will come to you. It has fewer "automations," and "big-button" solutions, than PowerDirector (and Magix and PrE), but with that comes power!
    It is the same with Encore vs the limited authoring capabilities of PowerDirector, Magix, Roxio and PrE. Again, more hand-work, but oh, so much more power!
    Can you tell that I am a control freak, and do not mind getting my hands dirty to access the power?
    There are a few things that Encore cannot do, that programs like Sonic Scenarist can do, but there are usually workarounds, either in the design, or in the implementation, that will get you "there," or close.
    I strongly recommend that any new user to Encore purchase and read Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. That book covers everything that Encore can do, with two current exceptions - Adobe Dynamic Link (CS4 version) and BD authoring. Both of those were added after the book and EncoreDVD 2.0, were released. However, the Help files cover both of those newer additions well.
    Along with the fundamentals of Encore, Jeff covers all sorts of tricks and tips for getting more out of Encore, than the DVD-specs. actually allow. Obviously, he cannot break those rules, though he CAN help you create the illusion that the rules HAVE been broken. The user will swear that they just saw things, that are impossible, based on the DVD-specs., which are very limiting. Hey, it IS "smoke and mirrors," but if the user is fooled, you have succeeded, right?
    Good luck, and when you get around to adding some "tricks" to your DVD-Videos, post back. I'd suggest a new thread, so that other users can benefit from the new title, and so that users know that this is a new question. You will find that there is not too much, that someone here has not done, one way, or another. Oh, there ARE some limitations, where there is no good way to "bend" those DVD-specs., but you'll be surprised at what one can "bend."
    Happy authoring,
    Hunt

  • Solution import error for on-premise

    Hi all,
    I have a solution in my production environment(divided into 3 parts), when i'm trying to deploy the solution (Managed/Un-managed tried both) onto the client server it is throwing an error without any message (Like a generic message). I have checked the Import
    log and CRM Trace log files and tried troubleshooting but there is no luck.
    I will post the import log and the trace log here, can anyone please help to solve the importing solution
    Solution
    Name
    StdGasTransmission
    Display Name
    StdGasTransmission
    Description
    Version
    6.0.0.0
    Package Type
    Managed
    Publisher
    Name
    DefaultPublisherNMPRCPIPELINESAFETY
    Display Name
    Default Publisher for NMPRC-PIPELINESAFETY
    Description
    Default publisher for this organization
    Email
    Website
    City
    Country/Region
    Street 1
    Street 2
    ZIP/Postal Code
    State/Province
    Phone
    Status
    Failure
    Message
    The import failed. For more information, see the related error messages.
    Progress [%]
    97.48
    Duration [s]
    244.1
    It is showing as unprocessed status for the files which is shown below
    Workflow
    {938627d1-4fb7-e411-80f2-00155d0a5b12}
    Lock Inspection Field
    Lock Inspection Field
    Unprocessed
    Workflow
    {527df5a1-038f-422a-9256-932a23e4b0d0}
    Std Ins F1 Gas Trans
    Std Ins F1 Gas Trans
    Unprocessed
    Workflow
    {bf6d20dd-f82b-43e0-8309-91c245d885df}
    GasTransmission_AutoRoute
    GasTransmission_AutoRoute
    Unprocessed
    Workflow Activation
    {938627d1-4fb7-e411-80f2-00155d0a5b12}
    Lock Inspection Field
    Lock Inspection Field
    Unprocessed
    Workflow Activation
    {527df5a1-038f-422a-9256-932a23e4b0d0}
    Std Ins F1 Gas Trans
    Std Ins F1 Gas Trans
    Unprocessed
    Workflow Activation
    {bf6d20dd-f82b-43e0-8309-91c245d885df}
    GasTransmission_AutoRoute
    GasTransmission_AutoRoute
    Unprocessed
    Plugin Assembly
    StdInsForm1_GT_AR_2_PM, Version=1.0.0.0, Culture=neutral, PublicKeyToken=bf2df9b91e15403a
    StdInsForm1_GT_AR_2_PM
    StdInsForm1_GT_AR_2_PM
    Unprocessed
    Plugin Assembly
    StdGasTransmission AutoNumber, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ab1a46818ba347cf
    StdGasTransmission AutoNumber
    StdGasTransmission AutoNumber
    Unprocessed
    Plugin Assembly
    StdInsForm1_GasTrans, Version=1.0.0.0, Culture=neutral, PublicKeyToken=427e236049a09a8e
    StdInsForm1_GasTrans
    StdInsForm1_GasTrans
    Unprocessed
    Plugin Assembly
    StdInsForm1_GT_AR_2_WPA, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9c073ad110dc36fb
    StdInsForm1_GT_AR_2_WPA
    StdInsForm1_GT_AR_2_WPA
    Unprocessed
    Plugin Assembly
    StdInsForm1_GT_AR_2_QAQC, Version=1.0.0.0, Culture=neutral, PublicKeyToken=76f0d5ed3da46871
    StdInsForm1_GT_AR_2_QAQC
    StdInsForm1_GT_AR_2_QAQC
    Unprocessed
    SDK Message Processing Step
    {5c4751aa-d943-e411-80de-00155d0a5b12}
    StdInsForm1_GasTrans.StdInsF1_GasTrans: Create of nmprc_phmsastdform1
    StdInsForm1_GasTrans.StdInsF1_GasTrans: Create of nmprc_phmsastdform1
    Unprocessed
    SDK Message Processing Step
    {9a918d50-50b7-e411-80f2-00155d0a5b12}
    StdGasTransmission_AutoNumber.StdGasTransmission_AutoNumber: Update of nmprc_phmsastdform1
    StdGasTransmission_AutoNumber.StdGasTransmission_AutoNumber: Update of nmprc_phmsastdform1
    Unprocessed
    Publish StringMaps
    Unprocessed
    Root Components Insertion
    Unprocessed
    Dependencies Calculation
    Unprocessed

    Hello Vighnesh,
    Could you verify this blog to see if it applies, explained here:
    Import of Solution Fails Without Error Message in Dynamics CRM
    Let us know if it applies.
    Best Regards.

  • IMPORT ERROR for .dmp file

    Hi,
    I am getting this error, when I try to import a .dmp file:
    ERROR:
    Message 100 not found; No message file for product=RDBMS, facility=IMP: Release 9.2.0.1.0 - Production on Wed May 23 15:35:53 2012
    Copyright (c) 1982, 2002, Oracl
    Invalid format of Import utility name
    Verify that ORACLE_HOME is properly set
    Import terminated unsuccessfully
    IMP-00000: Message 0 not found; No message file for product=RDBMS, facility=IMP
    There is imp.exe file in my bin folder. Also the environment variable is set.
    I have no clue how to overcome this problem.

    not sure what is happening, but my guess is that your imp msg file is not loaded correctly. The imp 0000 message is:
    00000, 00000, "Import terminated unsuccessfully\n"
    // *Cause:  Import encountered an Oracle error.
    // *Action: Look up the accompanying Oracle message in the ORA message
    // chapters of this manual, and take appropriate action.
    Dean

  • Repository import error for SAP Basis 640 SWC

    Hi,
    I am getting an error when importing SAP Basis 640 Software components into Integration repository. It is giving thsese java errors:
    com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method importFromImportSource. at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10.importFromImportSource(TransportServiceRemoteObjectImpl10.java:850) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10p4_Skel.dispatch(TransportServiceRemoteObjectImpl10p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NoClassDefFoundError at com.sap.aii.utilxi.core.strings.StringConversion.xml2String(StringConversion.java:645) at com.sap.aii.utilxi.dtd.api.DtdHelper.getString(DtdHelper.java:381) at com.sap.aii.utilxi.dtd.api.DtdParser.parseInputSource(DtdParser.java:68) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getDtdSchema(DtdInternalExternalCategoryService.java:72) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getExternalReferences(DtdInternalExternalCategoryService.java:48) at com.sap.aii.ibrep.bom.extdef.ExternalCategoryServiceImpl.getExternalReferences(ExternalCategoryServiceProvider.java:51) at com.sap.aii.ibrep.bom.extdef.ExternalDefinition.getExternalReferences(ExternalDefinition.java:35) at com.sap.aii.ibrep.server.persist.extdef.ExtDefInternalPersistSevice.writeTypeData(ExtDefInternalPersistSevice.java:95) at com.sap.aii.ib.server.persist.gen.PersistServiceProvider$PersistServiceImpl.writeObjectVersion(PersistServiceProvider.java:446) at
    The environment is same as in our development server.
    Any idea what causes this error.
    Thanks for your help.
    Madhu

    Hi Vijay,
    1.Check the pre-requsites of Basis patch # 9.
    2.What is your abap patch # ?
    3.Sometimes if you apply the patches by bundling them in queue,it will error out.
    4.Try to clear the import queue,and apply the patches one after another instead of in queue.
    I hope this helps,reply back.
    Rgs
    vikas

  • Import Failed for Global Schema

    Hi,
    I am trying to create GLOBAL schema for demonstration, The script is executing fine but there is no data available in the tables and no objects are created in the cube. Please advice.
    Venkat :-)

    Hi,
    I had I a problem loading data with SQL Loader (date format in text files containing data for dimension tables is localized in english). Did you examine SQL Loader logs?
    Simon

  • Fixing import error for non compilation CDs

    I've noticed that iTunes imports some CDs into the Compilations folder on XP when they are not compliation CDs. Does anybody know the procedure for moving these to the correct folder under the artists name ?

    All you have to do is first, in iTUnes, Goto goto edit>preferences>advanced>general and make sure "Keep Itunes Music organized" is checked. Then goto the main Library. Now in the top right corner, in the search field type the name of the album thats incorrectly in the "Compilation" folder. you will now only see a list of tracks on that album.
    Select the first track, hold down the shift key, then select the last track. this will highlight all of the tracks. Rightclick and hit "Get Info". In the section "Part of a Compilation" near the bottom, change it to No. iTunes will now move the folder under the correct artist.
    Next time you import a CD just use the same method of highlighting all tracks, selecting "Get Info" and making sure its not saying "Yes" to non compilation CDs

  • Import Error for the request - pl URGENt

    Hi Team,
    I've cretaed a request and transport to test box while import th request I'm getting the below error message.
    Activation of the update rules <cube Name>.
    Pl advise.
    Regards,
    Senthil

    Hi Raja,
    Look at all the data flows from that datasource.
    Sometimes the update rules of another cube coming from the same datasource are inactive.
    So go to the datasource, show the dataflow and check all paths from that flow.
    The error message does not always name the correct cube.
    Succes,
    Udo

  • Premier CS6 importer error for mxf files

    I can't import any mxf file into Premier CS6. I don't really understand this situation.
    I have intalled Canopus.HQ.CODEC.v6.0.7 and for example my vlc media player plays fine all of my mxf files.
    Can anybody help me solve this issue?
    Thanks

    Probably because they want to be able to investigate the exact type of mxf file it actually is. Because I edit mxf files with Premiere cs6 fairly regularly and I never have issues. So obivously something is either different with that specific type of mxf or something is corrupted which I doubt. Could you upload a small test file? So we can see if it will import into Premiere on our systems. Also since you're saying they digitized them using a canopus capture device/card and or software I'm thinking you may need that software and or the specific codec installed on your system in order to actually make use of that type of file.
    I'd recommend downloading the entire "canopus playback codec pack". This should solve your issue. However I have no way to promise it will, I'm fairly sure it should work... Simply google "Canopus Playback Codec Pack" and the first result will give you the info your need to get the full playback package. I'm guessing this your problem.

  • HANA Studio Import- Manage connection error.

    Hi
    In HANA studio, while import, Manage connection is giving error.
    In BO Dataservice4.0, i have created Data store and gave ERP connection details to connect ERP system.I am able to import tables from ERP in Datastore.
    Also I gave input to Server address(DS IP) and Repository name(Local repository) in Configure import server at Studio.
    Import click gives below error in Manage connections
    Error while opening the connection DS_XXX. Use "Manage Connections" to check the connection details.
    Any settings has to be done? pls advice.
    Regards
    Magalingam

    Hi Chandra,
    We have solved the problem.
    We have completed the following steps of the master guide of HANA:
    Configuring Data Services for Metadata Import:
    1. Setting the Passphrase
    1.1. Log into the Central Management Console of SAP BusinessObjects Enterprise (BOE).
    1.2. Choose Manage > Applications
    1.3. Choose Data Services Application.
    1.4. Choose Settings.
    1.5. Enter the Encryption Passphrase.
    1.6. Choose Save.
    Note: The passphrase you set here should be the same as the one you set in the SAP In_Memory Computing
    studio.
    Postrequisite: Restart the TOMCAT and BOE services.
    Regards,
    Enrique.

  • Error starting Hana Studio

    I have recently installed HANA studio (v 1.0060)and client (v 1.0070) in my 32 bit windows system. I worked in the same environment some time back without any issues. but facing the below error after a reinstall when starting HANA Studio.
    can this error be ignored and proceed further?

    Hi Viru,
    This is a functionality of Studio to open the sql files, which were opened at the time of closing the studio, when the studio is opened again.
    To achieve this, it stores them in your workspace and reads them on opening.
    But due to some reason, there is some corrupt file present in the location.
    You can either go to the location and check if such a file exists and it contains valid values for studio to open or create the same named file in the location so that your studio opens correctly.
    Or as mentioned above create a new workspace but you will have to add all the systems back again in the studio.
    Regards,
    Anjali.

Maybe you are looking for