HANA versions and revisions

HANA admins,
if i look at the version and it says '1.0.23', does it mean it's on revision 23?
if so, what are the plans for hanasrv-02 to upgrade to revision 24?
i'm really after the status of note 1673965 on the server.
thx

Hi ,
Below is the Information
1. if i look at the version and it says '1.0.23', does it mean it's on revision 23?
Yes It is revesion 23.
2.if so, what are the plans for hanasrv-02 to upgrade to revision 24?
HANA 1.0 SP02 is the combination of all HANA components(Studio,Modeler,SLT,DS,...) ..where as Revision's points to HANA Studio,HANA Client and HANA DB.
Regards
Purna

Similar Messages

_Patch level in SAP HANA Note and _Build No in SAP HANA

Hello Hana Gurus!
I need to know where can I find the patch level in the SAP HANA and SAP HANA Notes
For example, if I want to apply a note
http://service.sap.com/sap/support/notes/1964428
there is specified:
Software Component
Support Package
Patch Level
SAP HANA DATABASE 1.00
SP069
2
SP070
0
Ok. I read a lot of sources and understand the following:
To know the HANA Studio version:
Help->About SAP HANA Studio.
It will be like
Version: 1.0.27
Build id: 201205021925 (361805)
Here 1.0.27 means -> 1.0 version and Revision is 27 and Build No is : 361805
Re: From Studio, how to know the HANA DB Version
That is, if we apply 1964428 note, the system is upgraded to SP069 and SP070. Is that correct?
But what Patch Level means in this (and some other) note (value 2 and 0)?
Where I can check Patch Level in the HANA?
And, what are figures Build No indicate
UPD:
Here Re: Where we can check Patch leveles in HANA? referred to a certain table "M_HOST_CONFIGURATION". But in my system it does not exist. or tell me where to find it?
Message was edited by: Tom Flanagan

Hi Kirisetti,
please findanswers in italics
1)
I understand the database version and the studio version is not the same thing. But why do they match my system (see picture)? Or still the same thing?
By the way, to see the version of the database I used table SYS.M_DATABASE
A revision is released with all HANA components are part of the revision release and not just HANA DB server. So it is always ideal that you have all HANA components on same version as in your case. However is is technically feasible that you are usinga older version of Studio to connect to a newer version of HANA DB server. so Help-> About Studio would give you version of the studio and "select version from SYS.M_DATABASE" gives you version of the HANA DB server.
2)
and for the version and patch level
1.0.69.02 would mean HANA DB is on Revision 69 , patch 02
1.0.70.00 would mean HANA DB is on Revision 70
Soultion for the problem is to update your HANA DB to revision 69, patch 2 or Revision 70.
Did I understand correctly, if the note indicated Patch Level = 0, then we simply speak about updating to Revision, implying that no Patch Level? Or how it can be understood?
I'm assuming here you wish to know if you are downloading the right software for the update.
if there is a patch mentioned it is available as "Mantainence Revision <rev no>.<patch no>" for download and if there is no patch level mentioned(patch level = 0) they is avaliable as "Revision <rev no.>". Also update procedure for both Revision and patch is the same.
3)
Did I understand correctly, the first figure in the Build number (Build id) indicates the Patch Level? How it is possible to interpret the Build number (Build id) more? These figures represent something?
This build number is something that comes out of build repositiory. HANA version mentioned in all notes and guide refer to just the Revision number and patch level currently. You can ignore the build number

Error code -42408. I downloaded a newer version of iTunes, 10.7. Now it will not let me purchase anything. How do I fix? I have edited and revised all my names and account settings, checked payment. Quit, restarted. Help

I downloaded a newer version of iTunes, 10.7. Now it will not let me purchase anything. I get an error code -42408. What does this mean and how do I fix? I have edited and revised all my names and account settings, checked payment. Quit, restarted. Help please, I'm going crazy without my iTunes. I'm on a MacBook Pro.

Found this item it may help
OK, I have fixed it here. Here's what I did:
quit iTunes
trashed ~/Library/Preferences/com.apple.iTunes.plist
started iTunes, and authorised my account
Worked straight away after that !

Crystal Reports for B1 on Hana version 9.0, Invalid column name DOCCODE

Hi Experts,
I am new to SAP B1 for HANA, now I am learning how to use Crystal Report with SAP Business one for HANA version 9.0. I am facing this issue while trying to save the crystal report inside SAP B1 for hana. Please help me to fix the issue
The steps that I followed
1.created the Blank Crystal report file
2.imported that into layout manager
3.Then tried to edit the file using Crystal report 2011 sp4
4.For testing, I have used the Query SELECT * FROM SBODEMOSG.OCRD. In Crystal report i am able to get the data
5.But while trying the Save the report inside sap using Add-ins-->Save as option, im getting the following error message.

Moved to the B1 forum.
Business One is an OEM version of CR Designer.
Log onto your B1 site and download the latest Crystal Reports for B1. CR XI does not support the new connector.
Don

How to get the document type, name and revision from the search page cv04n

Hello,
After performing cv04n and getting a list of documents satisfying the search criteria, how can I then get the document type, name and revision of the selected document using ABAP?
Thanks

HI,
IN table DRAW... u have Document type, Version and document number.
In Table DRAT also u get Document Type, Version, Number and Description of Doucment.
Regards
SAB

S&OP on Hana, IBP and BPC

Hi All,
can some one please help me in understanding the difference between S&OP on HANA, IBP and BPC and how they are differentiated from SAP APO?
Thanks in advance.
Thanks,
Kishore

Story started around 2012 with S&OP Hana until version 3.0. Following marketing definition and Gartner group vocabulary, this application has now change its name to IBP S&OP 4.0. Nothing changes within S&OP except improvements with 4.0.
IBP is a new family of application in SCM under Hana
BCP belongs to analytic family, not much appropriate for SCM Concern.
APO is the previous APS of SAP that is still supported until 2025. Say a new customer needs SCM advance planning, better going IBP nowaday but nothing wrong with APO neither
Daniel

SAP HANA One and Predictive Analysis Desktop - Time Series Algorithms

I have been working on a Proof-of-Concept project linking the SAP Predictive Analysis Desktop application to the SAP HANA One environment.
I have modeled that data using SAP HANA Studio -- created Analytic views, Hierarchies, etc. -- following the HANA Academy videos. This has worked very well in order to perform the historical analysis and reporting through the Desktop Application.
However, I cannot get the Predictive Analysis algorithms -- specifically the Time Series algorithms -- to work appropriately using the Desktop tool. It always errors out and points to the IndexTrace for more information, but it is difficult to pinpoint the exact cause of the issue. The HANA Academy only has videos on Time Series Algorithms using SQL statements which will not work for my user community since they will have to constantly tweak the data and algorithm configuration.
In my experience so far with Predictive Analysis desktop and the Predictive Algorithms, there is a drastic difference between working with Local .CSV / Excel files and connecting to a HANA instance. The configuration options for using the Time Series Algorithms are different depending upon the data source, which seems to be causing the issue. For instance, when working with a local file, the Triple Exponential Smoothing configuration allows for the specification of which Date field to use for the calculation. Once the data source is switched to HANA, it no longer allows for the Date field to be specified. Using the exact same data set, the Algorithm using the local file works but the HANA one fails.
From my research thus far, everyone seems to be using PA for local files or running the Predictive Algorithms directly in HANA using SQL. I can not find much of anything useful related to combing PA Desktop to HANA.
Does anyone have any experience utilizing the Time Series Algorithms in PA Desktop with a HANA instance? Is there any documentation of how to structure the data in HANA so that it can be properly utilized in PA desktop?
HANA Info:
HANA One Version: Rev 52.1
HANA Version: 1.00.66.382664
Predictive Analysis Desktop Info:
Version: 1.0.11
Build: 708
Thanks in advance --
Brian

Hi,
If you use CSV or XLS data source you will be using Native Algorithm or R
Algorithm in SAP Predictive Analysis.
When you connect HANA, SAP Predictive Analysis uses PAL Algorithm which runs
on HANA server.
Coming to your question regarding difference,
In SAP PA Native Algorithm, we could provide the Data variable, Algorithm
picks the seasonal information from the Data column. Both R and SAP HANA PAL
does not support Date Column. We need configure seasonal information in
Algorithm properties.
R Properties
1) Period : you need to mention the periodicity of the Data
Monthly : (12)
Quarter : (4)
Custom : you can use it for week or Daily or hourly.
2) Start Year: need to mention Start year.
Start year is not used by algorithm for calculating Time series, but it helps
PA to generate Visualization ( Time series chart) by simulating year and
periodicity information.
3) Starting Period:
if your data is Quarterly and you have data recordings from Q2, mention 2 in
start period.
Example.
If the data periodicity is Monthy and my data starts from Feb 1979, we need to provide following information,
Period: 12
Start year: 1979
start Period: 2
PAL Properties. : Same as properties defined in R.
Thanks
Ashok
[email protected]

SAP HANA : differences and costs

Dear All,
HANA is designed to enable faster ways to process data from business applications in real time, without impacting the underlying source system. I believe HANA will bring new and interesting opportunities to SAP. Which are the most important technical differences between HANA, BWA and BOEA? Which are the cost differences?
Regards,
Bob

Bob,
Here are my thoughts:
HANA: Here's my recommendation for the best in-class next-generation BI solution. Deploy HANA as a standlone server with two logical system partitions. 1st partition for standalone HANA modeling and 2nd partition to host HANA DB for BW 7.3. This way you get to exploit HANA performance for both SAP BW system as a database and also use the HANA power for standalone non-BW (ECC and flat-file) application that need good performance.
BWA: I would not recommend a BWA solution for a new BW implementation. Given the fact that SAP has announced recently that BWA 7.3 will be the last release for BWA. However, if there is a critical BW application in production that needs better performance, then BWA will be a quick fix solution. The cost difference between an SAP HANA solution and a BWA solution is narrowing down quickly. I do not want to go into details of cost.
BOEA (aka BOE Accelerator Version): Guys, there is some confusion here. BOEA does not support BWA acceleration for non-BW data source data. Meaning that if you are using BOEA (accelerated version) - you can load non-SAP and Non-BW data but can not accelerate the data using BWA unless the data is put in an SAP BW info provider (cubes,etc..). Only BW info providers in a BOEA solution can exploit BWA acceleration. Other data (non-SAP and Non-BW ) can only exploit on indexing capability of BOE internally but not the BWA. BWA portion of BOEA is specific to BW in the backend.
Also, please read my executive summary on SAP HANA @ http://www.sendspace.com/filegroup/u1AO5NidaMTYSD49JoHsjg
Regards,
Rama

Not able to install HANA client and Studio developer edition on Windows(64 bit)

Hi,
I have recently downloaded SAP HANA client and Studio developer edition package for Windows 64.
ngdbc_rev68
sap_hana_win64_client_rev80
sap_hana_win64_studio_rev80
Bit,but I am not able to install it on my machine.
It is giving me error:
Cannot install
Cannot install Microsoft C/C++ Runtime
    Starting external program C:\Users\spragya\CSC\SAP HANA\Client and Studio\sap_hana_win64_studio_rev80\studio\msdev2010_vcredist_x64.exe
      Command line is: "C:\Users\spragya\CSC\SAP HANA\Client and Studio\sap_hana_win64_studio_rev80\studio\msdev2010_vcredist_x64.exe" /q
      Program terminated with exit code 1603
Can someone please let me know what is this issue and this can be rectified.
Screen image of the error attached for reference.

Hi Pragya,
Did you check : 1) Administrator Access while installing Microsoft C++ Runtime, 2) enough space on your disk, 3) try uninstalling the MS C++ old version 4) Empty Windows Temp folders
Also check if the environment variables are set right on your Windows machine.
Regards
Avinash Raju

Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

Hello Irene,
you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account
https://www.adobe.com/account.html and to find your serial number have a look there http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.
I tried to loading in "safe mode" but I still could not open Firefox.
I never received a crash i.d.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Uninstalled new version, horrible. Installed the older version and now it won't open! HELP WANT MY MUSIC!

I installed the new version thinking it would be the same, It was horrible! uninstalled it... Installed the older version and now it won't open and when I try it says it can't because the library can't open because it was used on a newer version. Come on! I just want my music! How do I open this and get my music back.
I put my Ipod in and it still says the same thing, what's going on? Please help me!

I don't know whom to thank first-- b noir for telling me about the Lorraine fix or Lorraine for figuring out the fix. THE LORRAINE FIX WORKED FOR ME!!! (I feel a little like I am advertising "Hooked on Phonics" with that last line!)
Thank you doesn't say it strongly enough, but THANK YOU b noir and Lorraine for your help. I was to the boiling point last night and starting to get there tonight. Now I am resting easy and thankful that there is a community of computer users out there who care enough to troubleshoot problems together and work together to figure out a solution--and then to take the time to post and share information.
I would STRONGLY suggest that anyone who is having the iTunes issues where iTunes just plain won't open at all after downloading the newest version and has a pc with Norton Internet Security 2005 try the "Lorraine Method."
I am so happy I think I might sing. Or not--I will let my songs on iTunes do the singing for me now that I can again!!!!!!!
And to those still looking for answers--be patient--I now know how incredibly frustrating this can be and I hope that you all find your solutions very very soon!!
--Alexis

I have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number

i have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number. also, when i click buy, i get an error message saying, "application not found."

There are two different LR’s, one with a serial-number licensing and one with a CC-signin license.
You should uninstall the serial-number LR you have installed, then
Quit the CC Desktop application,
Restart the CC Desktop application—this will rescan what you have installed and not see LR,
LR will now be on the CC Desktiop apps list, so install that.

I had a trial version, and tonight I bought it. But buttons led me to the Windows version which I accidentally bought. I have Mac. What do I do? How do I switch it over to a Mac version?

I had a trial version, and tonight I bought it. But buttons led me to the Windows version which I accidentally bought. I have a Mac. What do I do? How do I switch to Mac version?

Hi scarabs55,
Are you working with Acrobat or Photosohp? (You mention both PDF files and photos, so it's not clear.)
Let us know what software you're thinking about upgrading and we can point you in the right direction.
Best,
Sara

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g

HANA versions and revisions

Similar Messages

Maybe you are looking for