Hana view column descriptions are not showing in Crystal 2013

Hello All,
I have a hana calculation view which has the column name and label defined perfectly. When I use the HANA view in Crystal Report 2013, the column labels are not showing up in the field explorer even after enabling the show both name and description. Please help.

hi
is anyone has answer for this question.
thanks...!!!!

Similar Messages

DESCRIPTIONS ARE NOT SHOWED IN REPORT PAINTER

Hi, I have a problem with the report painter, because i am run the report but i realize that if the master data(Commitment item ) is not created for the next year example 2008 and I am running the report for the year 2007, when the report is generated the report does not show the description of the commitment item ...
Anyboy has a suggest
THANKS A LOT!!!
Pat

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

ITunes view columns - changes are not saved

Hello there,
When I make changes to the column size in the iTunes list view; like title, artist, album title ... it does not seem to save, regardless if I am on the iPhone list view, shared library list view, local music view, etc. When I close iTunes and open it again, it is often reset to the default settings. Where are these defaults settings defined? The default settings that it resets to, are those that came the way iTunes was first install, but how can I save these column size changes?
Thanks for all and any replies.
- Applies to my Windows iTunes and Mac iTunes.

KHCrowley,
Welcome to Apple's discussions.
Try clearing your browser cache, and then take another look. The changes are most likely there.
Mark

Descriptions are not showing on Perspectives and Objectives

I have provided descriptions for various Perspectives and Objectives in the Perspective and Objective Library and only some values are being displayed. What am I doing incorrectly?

Christopher,
What version are you working on? The only thing I can think of going back to version 7.5 is that, while there is a default description from the library, there is also the option via the Override descriptions link in the Conexts section of the Admin area, to override that description. It could be that this is what is causing the problem and that while you may be storing a description in the Library it is being overridden this way.
If you are on version 10.0 or 10.1 then I would suggest that you open a support ticket to look into this as this behaviour, particularly with it being inconsistent, suggests a problem. From your description I can't see what you are doing wrong.
Regards
Colin Cooper

Description of GL are not showing in Report Painter

Hello,
Friends I've made the trail balance in report painter but my problem is the GLs description under lead column are not showing. I checked the lead column and kept the radio button on key and description under report layout but sill its not working. Please suggest...
Quick reply will be more appreciated.

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Errors are not showing in Tasks view

Hello,
I dont know why errors are not showing in Tasks view after I click Save All Metada, they only show when a Rebuild de project. This start to happen after a few days, can anyone tell me how to fix this?
Thanks

Hi Carol,
After rebuild all compile time dependency and syntax might be checked and something is missing then errors suppose to come.
If you have doubt you can re install the NWDS...
Deepak!!!

Photo are not showing in view area when looking in folder for picture

When i have a photo folder open the pictures are not showing where i can see them without having to open the file, they used to
after i updated my touch smart the photo are is gone

Hi,
You can use this
View > Large icons (or Extra large icons)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My maps are not showing buildings with clarity. They have no color. It's like my maps are outdated but my ipad is fully updated. I can't get the option of views in my ipad

My maps are not showing buildings with clarity. They have no color. It's like my maps are outdated but my ipad is fully updated. I can't get the option of views in my ipad. Like the downtown view and stuff. Please help.

What locations are you seeing these "problems"? If the satellite photos are older or not as clear, you may see some of what you describe. Take a look at one of the major cities and see if they are also appearing as you describe. Someplace like New York, London, Paris. Those are among the cities that seem to be updated most frequently.
Incidentally, the maps are web/cloud based and not contained within the maps app on your iPad, so regardless of the version of your app, you will still get the most current map available.

IOS 5 - Notification are not showing in the lock screen knowing that the option view in lock screen is active ?

Hi ,
After Upgade my iphone4 to ios 5 , Notifications are not showing in the lock screen knowing that the option view in lock screen is active ?
Regards
HM

I experience this also sometimes (whatsapp), is this a bug??
sometimes when a person writes 2-3 messages in a row (for instance) in whatsapp (im in standby mode), it sometimes only displayes ONE message in lock screen mode (though he/she wrote more than 1), and sometimes shows the right corresponding written messages!
Why is this?
its really annoyoing when you get messages in lock screen mode BUT it doesnt stay and remain so you notice it. That way you get missed messages etc and notices it first...when doing the "pull-down list".
FIX THIS

HT4976 Some of emojis are not showing correctly in web view text are.

When I input emojis in webview's text area, some are not showing as a emojis, they are showing as a symbole e.x. ☺ (WHITE SMILING FACE),✌(VICTORY HAND) e.t.c., these are not the correct emoji as they are showing in apple device keyboard.
Can you please sugges me what should i do ?

Is Webview an app? If so, it may not support the Emoji font. Or, if you're talking about typing in a web page, the same maybe true. The iPhone Emoji font frequently shows up as garbage characters on other phones. It sound as if it's being converted to the Symbol font in whatever your trying to use it. Avoid use of the Emoji font unless you are communicating with other iOS devices.

Created by column value is not showing in XSLT List View After Migration To 2013

Hello All,
In my XSLT Created By Column value is not showing. Please help me with this problem. My code is simple I have custom column in XSLT name as 'Reported By' in which I want to show 'Created By' column value. but it is not showing. please help me with that.
Thanks in advance

hi
is anyone has answer for this question.
thanks...!!!!

Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required.

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Hana view column descriptions are not showing in Crystal 2013

Similar Messages

Maybe you are looking for