Hand Held application not recognising a database instance when running in cradled mode through Windows Mobile Device Centre.

How do I get a Hand Held application to recognise a database instance when running cradled through Mobile Device Centre?
I have a database instance on a networked machine as NZTESTSERVER2\NZ2008.
If I run the Hand Held application in WI-Fi connected mode it resolved this database connection name without any problems.
This database connection name also works from a Desktop application running on the PC that I have cradled the Hand Held to.
But the instance isn’t being resolved when I run the Hand Held application in cradled mode, without a Wi-Fi connection. In this case it still recognises the server address part ‘NZTESTSERVER2’ but it doesn’t recognise this with the database instance included
(\NZ2008).
I even tried using it with the servers IP and the instance (192.168.0.14\NZ2008), but again it recognises the server IP address (192.168.0.14), but not with the instance (\NZ2008).
So why does the app run in WI-Fi but not cradled mode?

It would better to understand your problem if you can share some code here,

Similar Messages

IPad mini not recognised by iTunes after updating to iTunes 11.1. All other devices are recognised...

After upgrading to ios 7, adn iTunes 11, I had some problems with both airplay and having my ios devices not recognised by iTunes. After a few fixes (re-installing Apple Mobile Device support ) manually, all is now looking good, apart from my iPad mini.
Windows recognises it when I plug it into any of the USB pports on my PC, however iTunes does not see it. The device is recognised by iTunes onother windows and Mac computers I have.
Is it posible to isolate which driver is being used by the mini, and uinistall it? I guess that if Windows sees the device as a "new one", it will re-install the device driver, and probably fix this issue.

Hey there BeakyGB,
Thank you for using Apple Support Communities!
Great troubleshooting done so far. I would next try this article named:
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
Cheers,
Sterling

Not Connecting To Windows Mobile Device Center

I want to be able to connect with a Windows Mobile Device through Windows Mobile Device Center, within a Virtual Machine. When connecting through the Hyper-V Manager and through Remote Desktop, under "Other supported RemoteFX USB devices",
I can see the Symbol USB Sync Cradle. In the VM, in Device Manager, I don't see a USB connection. In the VM, I don't see any meaningful errors in the Event Viewer.
Host: Windows 8.1 Enterprise Hyper-V on a Domain. Upgraded from Windows 8.1 Pro. When this computer was originally installed with Windows 8 Pro, Hyper-V was enabled. I removed Hyper-V, and installed VMWare Player, because I wanted
USB Pass-through. I then uninstalled VMWare and installed VirtualBox. Recently, I uninstalled VirtualBox, upgraded to Windows 8.1 Enterprise, and enabled Hyper-V.
Virtual Machine OS: Windows Server 2012 R2 on a Workgroup. Started out with being a VMWare VM, using VMWare Player. Moved to VirtualBox. USB Pass-through was working in both those virtual environments. Used Disk2VHD to convert the
VM to a VHDX file.
On the Host:
Windows Mobile Device Center is connected to a Motorola Windows Mobile Device (MC959X) sitting in a Symbol USB Cradle. The OS on the scanner is Windows Embedded Handheld 6.5 Classic CE OS 5.2.29217 (Build 29217.5.3.12.26). Advanced Networking
(USB to PC) is not enabled.
Enabled RemoteFX.
In the RDP file, and in the Registry, added the GUID's for:
WPD "{eec5ad98-8080-425f-922a-dabf3de3f69a}";
Windows Mobile "{6AC27878-A6FA-4155-BA85-F98F491D4F33}";
USB Device "{88BAE032-5A81-49f0-BC3D-A4FF138216D6}";
Windows CE USB Device "{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}";
GUID_DEVINTERFACE_USB_DEVICE "{A5DCBF10-6530-11D2-901F-00C04FB951ED}"
Ran "sfc /scannow"
All Microsoft Updates are current.
What am I missing?

Thank you for your efforts. I have followed those instructions, but I am still not all the way there yet.
Now, on the Guest, in the Device Manager, under Mobile Devices, I see the Symbol USB Sync. But Windows Mobile Device Center still does not connect.
In the Application Event Log, these Events are being generated:
Log Name:      Application
Source:        WcesComm
Date:          12/8/2014 12:45:54 PM
Event ID:      7
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DansWinServ12R2
Description:
Windows Mobile-based device failed to connect due to Start USB Connection (0x80004005) failure (see data for failure code).
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="WcesComm" />
    <EventID Qualifiers="49152">7</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-08T20:45:54.000000000Z" />
    <EventRecordID>7468</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DansWinServ12R2</Computer>
    <Security />
</System>
<EventData>
    <Data>Start USB Connection (0x80004005)</Data>
</EventData>
< /Event>
Log Name:      Application
Source:        Microsoft-Windows-ApplicationExperienceInfrastructure
Date:          12/8/2014 12:45:54 PM
Event ID:      1
Task Category: None
Level:         Warning
Keywords:
User:          DANSWINSERV12R2\dreisman
Computer:      DansWinServ12R2
Description:
The application (Windows Mobile Device Center 6.1, from vendor Microsoft) has the following problem: To function properly, Windows Mobile Device Center 6.1 must be reinstalled after you upgrade Windows.
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ApplicationExperienceInfrastructure" Guid="{5EC13D8E-4B3F-422E-A7E7-3121A1D90C7A}" />
    <EventID>1</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>2</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-08T20:45:54.044605800Z" />
    <EventRecordID>7469</EventRecordID>
    <Correlation />
    <Execution ProcessID="4832" ThreadID="4960" />
    <Channel>Application</Channel>
    <Computer>DansWinServ12R2</Computer>
    <Security UserID="S-1-5-21-3621870490-2575533387-1312730109-1001" />
</System>
<EventData>
    <Data Name="DBType">15</Data>
    <Data Name="AppNameCount">33</Data>
    <Data Name="AppName">Windows Mobile Device Center 6.1</Data>
    <Data Name="VendorNameCount">10</Data>
    <Data Name="VendorName">Microsoft</Data>
    <Data Name="SummaryCount">102</Data>
    <Data Name="Summary">To function properly, Windows Mobile Device Center 6.1 must be reinstalled after you upgrade Windows.</Data>
    <Data Name="SessionID">1</Data>
</EventData>
< /Event>
I have reinstalled Windows Mobile Device Center several times.
Any thoughts?

Windows Moile Device Centre 6.1 64bit Does not install proply after laptop put on Domain and then removed

hi Guys.
We have a laptop where Windows Mobile Device Centre 6.1 was happily working ok on a windows 8 Laptop and was running ok when the usb mobile device was connected. The Laptop was moved into a domain when the software would no longer work.
The laptop was removed from the domain but the software still did not work. I have tried removing and software and reinstalling but the Device Centre 6.1 64bit program does not appear to install correctly. The event viewer seems to state that the program
does install and gives a 0x0 install code. But no Windows mobile Device Centre icon appears also the 2 windows mobile related services are not created. I have tried installing the drvupdate-amd64.exe file with run as administrator and still the same thing
happens.
Anyone any ideas ? Could there be some old inherited domain policies hanging around that is causing the program now not to install correctly. ?

hi Guys.
WMDC can have great problems when trying to work with Computers that are in a Domain.
This is what solved the issue we were having.
We have fixed this problem on our network.
The key to this was understanding the role of the TrustedInstaller security principal in the Windows Resource Protection
feature introduced in Windows Vista. TrustedInstaller is a Windows service with the display name Windows Modules Installer in the Services list. Its full name is NT SERVICE\TrustedInstaller, which is what you use in permissions dialogues and the like.
The
reason we had a problem is because we followed the advice issued by Microsoft in response to the Conficker virus outbreak. See http://support.microsoft.com/kb/962007
In this Virus alert, Microsoft do point out that following their advice might cause problems with installing updates.
Our implementation of that advice was to create a group policy which modified the permissions on the registry key HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost.
In order to allow Windows Mobile Device Centre to install successfully we reverted the permissions back to what we
think is their default values. On our PCs the key permissions are:
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion
Owner: TrustedInstaller
TrustedInstaller permissions: Full Control & Read, not inherited
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost
Owner: System
TrustedInstaller permissions: Full Control & Read, inherited from CurrentVersion
Microsoft have effectively told us that the Mitigation steps in the advice were only supposed to be applied temporarily.
However, if someone doesn’t want to be responsible for removing this GPO, as far as we can tell, once WMDC is installed you can re-apply it without breaking anything WMDC related; devices are detected, drivers installed and connections established as normal.

Console Application not updating the database

Dear all,
I am new to c# development. I have a console application front end in program.cs
I have a local database on visual studio.
When I execute the stored procedure locally on the database the data is getting updated in the database.
When I update the same through Console Application - the data is not appearing in the database.
Can somebody throw light on this? Where I am missing
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace AssetApp
class Program
static void Main(string[] args)
bool value = true;
while (value)
value = getdisplay();
//Console.ReadLine();
//value = false;
private static bool getdisplay()
Console.WriteLine("-------------------------------------- ");
Console.WriteLine("---------------------------------------");
Console.Clear();
Console.WriteLine("----------Asset Application------------");
Console.WriteLine(" 1 Company Asset ");
Console.WriteLine(" 2 Standby Laptop Register ");
Console.WriteLine(" 3 Scrap Register ");
Console.WriteLine(" 4 Purchase Register ");
Console.WriteLine(" 5 Service Call Report ");
Console.WriteLine(" 6 IT Helpdesk ");
Console.WriteLine(" 7 Exit ");
Console.WriteLine("---------------------------------------");
string input = Console.ReadLine();
switch (input)
case "1":
CompanyAsset();
break;
case "2":
Console.WriteLine("Standy Laptop Register");
break;
case "3":
Console.WriteLine("Scrap Register");
break;
case "4":
Console.WriteLine("Purchase Register");
break;
case "5":
Console.WriteLine("Service call Report");
break;
case "6":
Console.WriteLine("IT Helpdesk");
break;
case "7":
return false;
default:
break;
return true;
private static void CompanyAsset()
Console.WriteLine("------Company Asset------------------------");
Console.WriteLine("Type the Department Name");
string departmentName = Console.ReadLine();
Console.WriteLine("Type the First Name");
string firstName = Console.ReadLine();
Console.WriteLine("Type the Last Name");
string lastName = Console.ReadLine();
Console.WriteLine("Type the User Name");
string userName = Console.ReadLine();
Console.WriteLine("Type the Model Number");
string modelNumber = Console.ReadLine();
Console.WriteLine("Type the AssetTypeID");
string assetTypeID = Console.ReadLine();
Console.WriteLine("Type the SerialNumber");
string serialNumber = Console.ReadLine();
Console.WriteLine("Type the WarrantyStartDate");
DateTime warrantyStartDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Type the WarrantyEndDate");
DateTime warrantyEndDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Company");
string company = Console.ReadLine();
Console.WriteLine("EngineerID");
string engineerID = Console.ReadLine();
Console.WriteLine("ITHelpdeskID");
string itHelpdeskID = Console.ReadLine();
Console.WriteLine("EmpID");
string empID = Console.ReadLine();
//Handshake
SqlConnection myNewConnection = new SqlConnection("Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\AssetApp.mdf;Integrated Security=True");
//open the database
myNewConnection.Open();
//create command
SqlCommand myCommand = myNewConnection.CreateCommand();
//using the stored procedue to update the database using parameters add
myCommand.CommandText = "InsertAsset";
myCommand.CommandType = CommandType.StoredProcedure;
myCommand.Parameters.Add(new SqlParameter("@DepartmentName", departmentName));
myCommand.Parameters.Add(new SqlParameter("@FirstName", firstName));
myCommand.Parameters.Add(new SqlParameter("@LastName", lastName));
myCommand.Parameters.Add(new SqlParameter("@UserName", userName));
myCommand.Parameters.Add(new SqlParameter("@ModelNumber", modelNumber));
myCommand.Parameters.Add(new SqlParameter("@AssetTypeID", int.Parse(assetTypeID)));
myCommand.Parameters.Add(new SqlParameter("@SerialNumber", serialNumber));
myCommand.Parameters.Add(new SqlParameter("@WarrantyStartDate", warrantyStartDate));
myCommand.Parameters.Add(new SqlParameter("@WarrantyEndDate", warrantyEndDate));
myCommand.Parameters.Add(new SqlParameter("@Company", company));
myCommand.Parameters.Add(new SqlParameter("@EngineerID", int.Parse(engineerID)));
myCommand.Parameters.Add(new SqlParameter("@ITHelpdeskID", int.Parse(itHelpdeskID)));
myCommand.Parameters.Add(new SqlParameter("@EmpID", int.Parse(empID)));
int recordsAffected = myCommand.ExecuteNonQuery();
if (recordsAffected == 1)
Console.WriteLine("Successful your entry");
else
Console.WriteLine("Your entry is not successful");
myNewConnection.Close();
Console.WriteLine("");
Console.WriteLine("Press Enter to continue");
Console.ReadLine();
public static void StandbyLaptopRegister()
Console.WriteLine("-------------------------------");
Console.WriteLine("Select the Date & Time");
string DateTime = Console.ReadLine();
Console.WriteLine("");
ALTER PROCEDURE dbo.InsertAsset
@DepartmentName NVARCHAR(50),
@FirstName NVARCHAR(50),
@LastName NVARCHAR(50),
@UserName NVARCHAR(50),
@ModelNumber NVARCHAR(50),
@AssetTypeID INT,
@SerialNumber NVARCHAR(50),
@WarrantyStartDate SMALLDATETIME,
@WarrantyEndDate SMALLDATETIME,
@Company NVARCHAR(50),
@EngineerID INT,
@ITHelpdeskID INT,
@EmpID INT
@parameter1 int = 5,
@parameter2 datatype OUTPUT
AS
/* SET NOCOUNT ON */
BEGIN
INSERT CompanyAsset(DepartmentName,
FirstName,
LastName,
UserName,
ModelNumber,
AssetTypeID,
SerialNumber,
WarrantyStartDate,
WarrantyEndDate,
Company,
EngineerID,
ITHelpdeskID,
EmpID)
VALUES(@DepartmentName,
@FirstName,
@LastName,
@UserName,
@ModelNumber,
@AssetTypeID,
@SerialNumber,
@WarrantyStartDate,
@WarrantyEndDate,
@Company,
@EngineerID,
@ITHelpdeskID,
@EmpID)
/*RETURN @@IDENTITY*/
END
Cheers
Sathya

Hello,
Usually when I see
AttachDbFilename=|DataDirectory| ...
The database was added into the project via the IDE add new data source and if so make sure under the property window for the database that "Copy to Output Directory" is set to either the first or last option as the default "Copy always"
copies the database each time you build the project thus overwrites the last time you ran the project.
I would recommend the "Copy if Newer" which means the database is only copied if you make changes to the database. Set "Copy if newer", build run check results.
Of course this may not be the issue but may very well be too.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How can I set my database instance to start in OPEN mode after my computer

Hi all,
Sometime, I have to reboot my computer. After it rebooted, my instance is automaticaly executed. But, my database is not set to the OPEN mode (automaticaly). On some development computers, my status is set to OPEN after a reboot. On some computers, the local database is set to the IDLE instance.
How can I set my database instance to start in OPEN mode after my computer has rebooted?
Thank your for any help.

but i could not run command emctl start dbconsolor lsnrctl..
What error you are getting? If you are not able to run both of them then the ORACLE_HOME is not set properly.
i set oracle_home and oracle_sid in thereWhere? Is it set in your user variable part of system variable. It is good to set it in the system variable, so that it will be common for all the users who use the system.
To check whether the variable is set or not go to the command prompt and type
setIf you see your ORACLE_HOME variable then it is set or else not.

HT1567 Itunes 10.6.1.7 is not recognising an Audio CD when inserted in the drive. This means I connot import any CD's. What could be wrong?

iTunes 10.6.1.7 is not recognising an audio CD when inserted in the drive. This means that I cannot import CD's. It used to work but since installing other software iTunes does not see the audio CD and will not open the drive when "eject disc" is selected from the controls menu.

Check the drive letter of your CD drive. iTunes doesn't seem to work properly with CD drives if they are mapped to the letters A or B. Use Disk Management tool in windows to change to a different letter and this will fix it (if this is the cause!).

My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information?

My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information? I don't want to try syncing and backing up data to just lose it all. As the new one I plan to get is a newer model, I'm thinking it is just better to do it manually, but then I have the issue of syncing the new one to start.

Hello Smeebo,
Thank you for asking your question! It sounds like your iPhone is not recognzied in iTunes when you connect it to back it up, or update the device. I would try the troubleshooting in either of these 2 articles depending on what operating system you have:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
or:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
All the best,
Sterling

My mac is not recognising my iphone in itunes although it does appear in iphoto under devices. I ant to sync music - help!!, my mac is not recognising my iphone in itunes although it does appear in iphoto under devices. I ant to sync music - help!!

my mac is not recognising my iphone in itunes although it does appear in iphoto under devices. I ant to sync music - help!!, my mac is not recognising my iphone in itunes although it does appear in iphoto under devices. I ant to sync music - help!!

What version of iTunes are you running?

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore

700w not recognized by Vista with windows mobile device center

please help:
i have a treo 700w that doesn't want to consistently connect to machine I am working on. when it works (rarely), it works fine, when it doesn't there is no explanation. I have restarted both computer and phone, and I can't seem to get a connection made.
Further I tried to uninstall/reinstall the windows mobile device center, i have removed the sync profiles on both my computer and phone, but nothing is seeming to work. I find it interesting that vista recognized my Smartphone USB device (it shows in the device manager), but that windows mobile device center doesn't show that anything is connected.
I am connecting via USB, but would be happy to connect via bluetooth, but when i try that approach, it only offers headset/wireless stereo (i'm looking for calendar/contacts/etc).
any direction would be wonderful - i have searched in google and subsequent pages for an hour already, and I'm thinking someone must have a better way.
Thanks,
-cb
PS - for those who are forum administrators, the registration process sucks: the password limitations are oddly strong for a simple forum like this, and when you don't put in a proper password from the get-go, it clears your prior selection of device/os/agreement registration, so when you fix the red flags (the password) and submit, it (and only then) tells you that you've forgotten to answer the questions below (that you had already answered before you were thwarted by the password reqs). sigh.
Post relates to: Treo 700w (Verizon)

Hi AlanG,
I have tried multiple USB connections, and do not have another sync cable. No luck.
Though, your post gave me an idea and that was to use a safety pin to scrape the contacts at the bottom of the phone. I keep the phone in my pocket most of the time, so there was some visible grime, though i would have guessed that the connection could have been made (it wasn't that grimy, just not shiny).
The other thing that was interesting is that when it was plugged in previous to the cleaning it shows the device connected to be a " smartphone usb sync ". Post cleaning, it now shows as a " PocketPC ". I'm not sure what the difference is, nor if I should be hoping that it reads "treo 700w", but hey, can't look a gift horse in the mouth, right?
So, that, in addition with removing all partnerships on both the machine and the treo (and after restarting my phone) it finally connected.
Wow. What a remarkable pain. Let's hope it keeps working.
Post relates to: Treo 700w (Verizon)

MBSA 2.3 Reporting SQL 32-bt instance is running in mixed mode when it is set to Integrated

I have SQL Server 2008 R2 64-bit installed. I just finished running MBSA 2.3 it is saying that the 32-bit instance is running in mixed mode. I only have one instance installed (64-bit). The 64-bit is set to Windows Authenticated.
How to I fix this finding?

Hi,
What is output of below
SELECT SERVERPROPERTY('IsIntegratedSecurityOnly')
GO
EXEC MASTER.SYS.XP_LOGINCONFIG 'LOGIN MODE'
Did you restarted SQL Server service after changing Authentication mode
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I'm not able to upgrade my Mac to itunes 10.5. Keep getting message "Run pre upgrade script for apple mobile device support" any help please?

Hi I'm not able to upgrade my Mac OS X 10.5.8 to itunes 10.5 Keep getting message "the following install failed. run pre upgrade script for apple mobile device support" contact software manufacture for assistance. any help please?

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

Bluetooth device is not listed in Windows mobile device center

Hi,
I installed the latest Vista Bluetooth Driver on my Notebook (P100 426) and I even get a connection with my cell phone; unfortunately I'm not able to use this connection with windows mobile device center. If I click on the Bluetooth icon in the control panel I don't see the bluetooth device of my notebook.
Any suggetions?
Sascha

Vista Mobile Device Center support is currently not included. It should be implemented in one of the coming versions.

Service is not relocated to available instance when pref node hangs.

Hi,
I'm fighting strange problem with 4 node 10.2.0.3 RAC on Linux .
We have service defined as follows:
IT PREF: hp3 AVAIL: hp4 hp2 hp1
1* select name,service_id from dba_services where name = 'IT'
SQL> /
NAME                                                             SERVICE_ID
IT                                                                        8
1 select name, failover_method, failover_type, failover_retries,goal, clb_goal,aq_ha_notifications
2* from dba_services where service_id = 8
SQL> /
NAME            METHOD      TYPE        RETRIES GOAL       CLB_GOAL AQNOT
IT              BASIC       SELECT          180 NONE       LONG     YES
lsnrctl service gives
Service "IT" has 1 instance(s).
Instance "hp3", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:36495 refused:0 state:ready
         REMOTE SERVER
         (ADDRESS=(PROTOCOL=TCP)(HOST=_SOME_VIP_)(PORT=1521))When prefered instance hp3 goes down (aborts) ,all is working ok, service is relocated to hp4 and users can connect.
But when prefered instance hangs (local disk controller issue) users are not able to connect to that service .
My goal is to have that service on 1 node only, and in case on failure (hard or soft) redirect all conections to that
service on other node (only 1 not load balancing and so) .
How to configure that ?
Oracle pointed out :
How To Configure Server Side Transparent Application Failover [ID 460982.1]
but I dont want to loadbalance connection .
Please advice .
Regards
GregG

Hi,
actually your database should not hang. Because when it hangs on one node this error will impact all the other instances as well, since this node has database blocks in memory it exclusively accesses, and when these cannot be transferred, your other nodes will "wait". Hence it is crucially important that when your disk controller hangs, the database instance gets aborted, if not even the node should get evicted.
So if your described szenario really is the case, then the service definition will not help you fix the issue. You should instead have a look at the reason, why the node does not react (or does not get an error).
If the clusternode behaves correctly then the service will failover. Just make sure you configure your clients correctly to react to this:
http://www.oracle.com/technetwork/products/clustering/overview/awmrac11g-133673.pdf
Regards
Sebastian

Hand Held application not recognising a database instance when running in cradled mode through Windows Mobile Device Centre.

Similar Messages

Maybe you are looking for