Handbrake Version 0.9.4 x86_64 No H.264 Support
I gave my iPod 30GB Video 5G to my daughter. Before doing so I wanted to put some of her favorite movies on it. I worked for hours trying to figure out why the films wouldn't transfer to the iPod, even after consulting with Apple Support. (BTW, The Library of Congress has determined in 2010 you are allowed to make legal back-up copies of films AND music you own for personal use - _Not For Others_).
In experimenting and reading Handbrake's support notes, I finally found out why the films wouldn't transfer: Handbrake Version 0.9.4 x86_64 won't support the H.264 codec, at present.
Use *MPEG-4 (FFmpeg)* codec and it works fine, _avoid using 5G support_; chapters work just fine w/o it!
Of course there will be the occasional film that won't process for some other reason (ie, Hard Days Night, etc), but for the most part, you'll find you'll be able to continue to use this generation iPod.
By the way, I slipped it into a new jacket's pocket I got for her. When trying it on, she slid her hands into the pockets and found the iPod! She was absolutely thrilled!!!
Consider, it is responsible to pass-on electronic devices rather than have them accumulate in a drawer unused, or even worse, landfill...
Enjoy!
Have you tried relinking?
See here.
http://ist.uwaterloo.ca/~baumbach/ORACLEnotes/STARTUP_relinking_oracle.html
Similar Messages
-
I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support -
OCI version 10.1.0.2.0 is not supported in Toad
I have upgraded my 9203 Oracle database to 10.1.0.2. Now when I connect to the database via TOAD 7.6, it gives me the following error:
"OCI version 10.1.0.2.0 is not supported"
Can some one let me know about how to solve this problem.
Thanks in Advance.
-BikashHere an answer from askTom:
Hi Tom,
I am not sure if I can ask this question in this thread or whether you are aware
of the following problem (as you are very fond of SQL*plus... ;) ).
I was happily usig toad 7.6 to work with oracle 9i. But now an upgrade to 10g
has caused toad fail to connect. Error "OCI version 10.1.0.2.0 is not
supported". But if I install 9i client and try to connect, then it works fine.
Is there any workaround?
Thanks and regards
Praveen
Followup:
you'd have to ask the makers of toad if they have a 10g client version or not.
Basically what is happening is that you have a 9i compiled piece of client
software (toad).
it uses, it depends on the 9i client software.
in order to use the 10g client software -- you'd need a new binary from the
makers of toad.
SQLPlus would be the same -- the 9i sqlplus needs the 9i client, the 10g sqlplus
needs the 10g client and so on.
As it is -- you are OK right now, you have installed the software needed by toad
and a 9i client connecting to a 10g database is "ok, supported and normal" -
Application Is Running On A Version of Adobe AIR Which Is No Longer Supported?
"This application is running on a version of Adobe AIR which is no longer supported. Please install the latest version of Adobe AIR from..."
This is the message I get when I try opening an F4V. file. I never had this issue in the past. I tried going to the website to update my version of Adobe AIR, and it says I cannot, since it's already up-to-date. Any thoughts would be greatly appreciated.
Thanks.Do you have access to the problematic machine? If so, maybe you could try to install Sysinternal's Process Monitor http://technet.microsoft.com/en-us/sysinternals/bb896645
Run the tool, create filter to see just events containing your app name and try to find in the result any issue... you could also compare the log with same log from not problematic machine or with app made with older SDK which was working.
That's all what I can do... it's a shame that nobody from Adobe is interested yet... maybe you could also submit a bug. -
Hello all,
I got this error when verify operation of source compatibility with the Collectors:
Audit Vault Server: Windows Server 2003, Oracle 10.2.0.3
Audit Vault Client: Windows Server 2003, Oracle 10.2.0.1
Run this command on Audit Vault Server:
E:\>avorcldb verify -src 10.10.70.51:1521:orcl -srcusr system/oracle -colltype ALL
source ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM verified for OS File Audit Collector collector
source ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM verified for Aud$/FGA_LOG$ Audit Collector collector
ERROR: specified version 10.2.0.1.0 is not supported
Please provide me any infomation to fix this error.
Do I need to upgrade the Audit Vault Client to 10.2.0.3 ?
Thanks.Thank Damorgan,
It's ok after upgrading to 10.2.0.3.
But now I get another errors, please help:
urgent: could not get AV agent connection using jdbc:oracle:oci:@AV
Thanks. -
TOAD ERROR : OCI version 10.2.0.1.0 is not supported
Hi all,
Previously i have oracle 9i in my system, now i installed oracle 10.2.., after this when i am trying to retrieve data from tables im getting this error "OCI version 10.2.0.1.0 is not supported". Please help me how can i solve this problem.
Thanks in advanceYou need deinstall the old version of toad and install version higher than V 8.5 which will fix the issue. Because the default home is read by Toad sometimes reinstallation will fix the issue.
--kccrga -
What versions of Weblogic currently have Subject Alternative Name support?
I would like to visit a comment I saw in an old forum thread from 2010
Certificate hostname verification error with 10.3
that "WebLogic currently does not support the Subject Alternative Name field." Can someone please let me know what versions of Weblogic currently have Subject Alternative Name support? We are currently on 10.3. Is there anything near that version that has support, or a patch available for it?
Regards,
JohnThe KM number is the article number on the support site. Logon to Oracle support and paste the number into the knowledge search and you will get your answer. The article is called "How to Develop Custom Hostname Verifier for Subject Alternative Name (SAN) Certificates" and applies to WLS 10.3.3 and later.
-
My airport express is 10 years old and I get the message that this version of airport utility (6.2) doesn't support my base station? What to do?
What to do?
Two Options:
1) Buy a new AirPort Express, which will be supported.
2) Try a workaround....not supported by Apple.....to install AirPort Utility 5.6 on the Mac using the Mountain Lion operating system and use the 5.6 application to administer the old AirPort Express. See this thread for more details:
https://discussions.apple.com/message/21397085#21397085 -
trying to update to latest Itunes. Get almost through the installation and get a message that old version of Itunes cannot be removed, contact local support group. What is up?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express - because Airport Util 6.0 won't recognise it.
But when I go to mount, it says Airport 5.6 it can't be installed as my version of OSX (latest Mountain Lion) is not supported/does not support on 5.6.
Super unhelpful error messages bringing back memories of using Windows...
Anyone sussed this, or have Apple just fazed out the original Airport Express hardware on the sly?Generation 1 AirPort Express is Model No A1264. Check the side of your Express to look for the model number there. AirPort Utility in Mountain Lion will configure this model.
More likely, you have an older "b/g" version of the Express. Apple started the "Generation" thing with "n" capable devices. The Model number of your device is likely either A1084 or A1088. AirPort Utility in Mountain Lion no longer supports these older "b/g" devices.
If you have a Mac there running an earlier version of the operating system, you can use that to configure the Express.
Or, there is is workaround to install AirPort Utility 5,6 for Lion on Mountain Lion. See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
I am using Windows XP, SP3. I have experienced this printing problem with anything I print from the internet, any site. I can read whatever I am printing, but there is a light gray background on the whole page. I saw something similar in the problems already listed in the help section, but the fix in the about:config files did not help; same problem existed. The only thing that fixed it was to uninstall Firefox 4, and reinstall the prior version. I am now using version 3.6.17. I have read the warning when I start Firefox to seriously consider upgrading to version 4, and that the older version won't be supported, but since I can't print from it without wasting considerable ink, and having pages that are unattractive and difficult to use, I don't know what to do. Please help. I want to use the new version, but MUST be able to print clean pages, without a gray background on each one.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
It's my own fault. I was warned that my old iMac (running only on Tiger) was not capable of receiving Firefox 4. But I did an experiment and tried loading it anyway.
Now, a disabled version of Firefox, that I cannot open, is the only version of Firefox on my computer. I'm sure it made everything I was using on Firefox disappear!
Is there some way to replace this disabled version with the latest one I CAN support?Downgrading from Firefox 4 to Firefox 3.6.20
1. Visit ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.20/mac/
2. Find your language and Open Firefox 3.6.20 folder
3. Download and install Firefox setup file (3.6.20 dmg)
You’ll be automatically downgraded to Firefox 3.6.20 and your favorite add-ons, bookmarks and settings will remain untouched.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
Version 03.03.00.XO - MLS QOS not supported
Hi All,
Anyone face the same problem with the following IOS Version?
MLS QOS is not supported in global command.
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.03.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 14-Aug-13 07:26 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: 15.1(1r)SG2
Switch uptime is 6 minutes
System returned to ROM by power-on
Running default software
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1449
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Information for 'WS-X45-SUP8-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
cisco WS-C4506-E (P5040) processor (revision 2) with 4194304K bytes of physical memory.
Processor board ID FXS1812Q346
P5040 CPU at 2.2GHz, Supervisor 8-E
Last reset from PowerUp
1 Virtual Ethernet interface
20 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
SWITCH(config)#mls qos
^
% Invalid input detected at '^' marker.
SWITCH(config)#
SWITCH(config)#?
Configure commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
access-session Access Sesion Global Configuration Commands
agent-server Modify DNS server properties
alias Create command alias
ancp Configure ANCP
archive Archive the configuration
arp Set a static ARP entry
async-bootp Modify system bootp parameters
audit Router Audit
authentication Auth Manager Global Configuration Commands
auto Configure Automation
banner Define a login banner
beep Configure BEEP (Blocks Extensible Exchange
Protocol)
bfd BFD configuration commands
bfd-template BFD template configuration
boot Modify system boot parameters
bridge Bridge Group.
buffers Adjust system buffer pool parameters
bulkstat Bulkstat Application
call-home Enter call-home configuration mode
cdp Global CDP configuration subcommands
cef Cisco Express Forwarding
cisp Set CISP parameters
class-map Configure CPL Class Map
clns Global CLNS configuration subcommands
clock Configure time-of-day clock
cluster Cluster configuration commands
cns CNS agents
comet-server Configure comet-server properties
config-register Define the configuration register
configuration Configuration access
control-plane Configure control plane services
crypto Encryption module
cts Cisco Trusted Security commands
default Set a command to its defaults
default-value Default character-bits values
define interface range macro definition
device-sensor IOS Sensor Commands
diagnostic Configure diagnostic information
dns-server Modify DNS server properties
dnsix-dmdp Provide DMDP service for DNSIX
dnsix-nat Provide DNSIX service for audit trails
do-exec To run exec commands in config mode
dot1x IEEE 802.1X Global Configuration Commands
downward-compatible-config Generate a configuration compatible with older
software
eap EAP Global Configuration Commands
emm Specify pre-loading of MDF
enable Modify enable password parameters
end Exit from configure mode
energywise EnergyWise Global Configuration Commands
epm EPM Global Configuration Commands
errdisable Error disable
ethernet Ethernet configuration
event Event related configuration commands
exception Exception handling
exit Exit from configure mode
fallback Fallback configuration commands
fhrp Configure First Hop Redundancy Protocols
file Adjust file system parameters
fips FIPS mode after next reload
flow Global Flow configuration subcommands
format Format the output
global-address-family Enter address-family base routing topology mode
help Description of the interactive help system
hostname Set system's network name
hw-module Apply command (e.g. shutdown) to specified
hardware target
hw-module Control of individual components in the system
hw-switch Control of individual components in the switch
id-manager ID Pool Manager
identity Identity Configuration Commands
infra-test Configure end2end properties
interface Select an interface to configure
ip Global IP configuration subcommands
ipc Configure IPC system
ipv6 Global IPv6 configuration commands
isis Global ISIS configuration subcommands
issu no description
key Key management
kron Kron interval Facility
l2 Layer 2
l2protocol-tunnel Tunnel Layer2 protocols
lacp LACP configuration
li-view LI View
license Configure License
line Configure a terminal line
link Enable Link State Tracking feature
lldp Global LLDP configuration subcommands
location Global location configuration commands
logging Modify message logging facilities
login Enable secure login checking
mab MAC Authentication Bypass Global Configuration
Commands
mac Global MAC configuration subcommands
macro Macro configuration
media-proxy Global media proxy configuration
mediatrace Mediatrace Application
memory Configure memory management
metadata Metadata Application
mka MACsec Key Agreement (MKA) configuration
module Module
monitor Monitoring different system events
mvr Enable/Disable MVR on the switch
netconf Configure NETCONF
Thank you.Hi,
QOS implementation has radically changed since the advent of
sup-7 & later
You no longer set mls qos as qos is on the engine by default.
Please see the following links
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/white_paper_c11-539588.html
"Ingress QoS: Default Actions
First and foremost, QoS does not need to be enabled on the Supervisor Engine, it is on by default in compliance with the MQC construct.
When a packet arrives at an interface, there are two options to take into consideration: is there a policy attached or not? If the packet arrives with or without a marking and there is not a policy attached to the interface, packets will flow through the switch untouched. There are no questions as to where the packet came from or if it has a valid marking. If the packet arrives with or without a marking, and a policy is attached to the interface, the packet will only then be subject to the policy classification."
And the config guide
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1/XE_330SG/configuration/guide/config/qos_mrg.html#wp1461453
Hope this helps
Regards
Alex -
Hi all,
We are having database server - oracle 10g enterprise edition R2,
forms - Oracle forms 10G -Version 10.1.2.0.2 on windows 2000 professional.
We have created a table which has a column of type "timestamp",the following is the structure.
CREATE TABLE "STOCK_AREA_MASTER"
( "STOCK_AREA_CODE" NCHAR(5) NOT NULL ENABLE,
"STOCK_AREA_DESC" NVARCHAR2(40) NOT NULL ENABLE,
"RECORD_STATUS" CHAR(1) DEFAULT 'A',
"USER_ID" NVARCHAR2(20) DEFAULT USER,
"TIMESTAMP" TIMESTAMP (6) DEFAULT CURRENT_TIMESTAMP)
[\code]
We tried to invoke this table(stock_area_master) using database block wizard in forms 10g,we were expecting to see the columns in this table,but we got the following error
FRM -10095 - Assertion failed
on seeing the forms help for the error FRM-10095,We are getting the following message
FRM-10095: Assertion failed in %s, at %s:%d. Cause: An internal inconsistency was detected. Action: Contact an Oracle support representative, and proceed with caution
We have the following concerns.
1.) is it possible to have datatype "timestamp" in forms 10g,our researches show that we can manipulate using datatime datatype in forms,our requirement is have to precision of 6 digits(millisecond - format - dd/mm/rr hh24:mi:ss:ssss),we are able query and view precision to the tune dd/mm/rr hh24:mi:ss:ssss,but we are unable to insert/update to this precision.
We would appreciate if some one could throw some light on the above.
Thanks in advance
Regards
MohanHi Mohan,
Hm. Strange.
I have reproduced the problem in my environment.
I have also found, that building the block manually, seems to work, as long as you define the item with datatype Char in Form Builder. Inserts and updates using a value like "22-AUG-06 11:10:11,647354 AM" worked fine for the timestamp item.
You may want to enforce some dateformat. I don't know whether that will work.
Good Luck!
Remco -
this is what is under my help tab (about Mozilla Firefox) It seems I have version 2.0 in there some how.
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/2.0.0.9;EGAMES 1.0 (.NET CLR 3.5.30729)You have a corrupted user agent:
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.13) Gecko/20101203 <u>Firefox/2.0.0.9;EGAMES 1.0</u> (.NET CLR 3.5.30729)
See:
* [[Web sites or add-ons incorrectly report incompatible browser]]
Check the <b>general.useragent</b> prefs on the <b>about:config</b> page.
You can open the <i>about:config</i> page via the location bar, just like you open a website.
Filter: <b>general.useragent</b>
If any <i>general.useragent</i> prefs are bold (user set) then right-click that pref and choose <i>Reset</i>.
Maybe you are looking for
-
Can I get my contacts back from old backup files after restoring iphone?
Hi, I've recently upgraded to windows 7. My iphone crashed recently and I have restored it. It is now working but all my contacts, apps etc are lost, I assume because I had never synced the iphone since I got win 7. Though I dont have my old XP compu
-
Is there ANY way to keep track of changes or versions in a dynamic form, viewed in Reader
I need to provide a measure of content control. I looked at acrobat.com for help. There is a rather convoluted method and I don't know if I can get my company to go along with it. I have a dynamic form and it has to be dynamic, so I cannot change it
-
Hi all, I have requirement in providing f4 help for a field. I want similiar to search help where i can input few values and get the required values based on the input. Input few values means inputing int he pop up window when we press f4 values. I c
-
Creating folder for web pages?
Hi there , Hey this work in Firefox no problem at all but it seems impossible to do in safari. basically i need to make a folder and name it and then add a collection of webpages into the folder. cheers
-
Does programming/developing work well with the mini mac
has anyone downloaded wcode 4 using the mini mac and is there problems with using this application for developement on the mini mac