Handeling named anchors

Hi
I'm trying to set up an news page on my site. I have one main frame where I want the news articles to be displayed, "News". Linked to the frame New is a html page where I write the articles month by month.
In another frame "search" I have a list of months. in the htlm page linked to "search" I have made each month a link to a named anchor in the "news" page.
My site is set up with css and I have a container 790x650 px. The frames are inside this container. The background is a color defined in css.
I have two problems:
When I search in the "search" frame the entire site scroll upwards. I want the container to stay fixed against the top of my browser and the scrolling to be contained to the frame "news". I have the container centered with a 60 px top margin. Is there a function that will keep the page from scrolling? Should I set it up another way?
I can't get the months I use as links in my "search" doc to list with a normal spacing. How do I change this?
Grateful for all input,
Erik

Hi Nancy
Thank you for replying.
I'm using iframes. I hope it's not as bad. Please advice if you know of another, better solution.
My site is not up yet but you can see the page I'm referring to at www.evenemang1.se/nyheter_1.html.
Again, Thank you for helping out!
Erik
30 mar 2010 kl. 20.26 skrev Nancy O.:
You'll need to post a URL to your page. There's no way we can help you without seeing your CSS and HTML code.
I sure hope you're not really using FRAMES or Framesets. That would be a tragedy because Frames are so awful the W3C saw fit to remove them from HTML 5 web standards.
*More on Frames -
http://apptools.com/rants/framesevil.php*
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com
>

Similar Messages

Target Named Anchor in a Spry Collapsible Panel from a different page

Let me start by saying I have combed this forum (and others) looking for a resolution to this. I am familiar with David Powers solution on Foundationphp.com and am using that code in project to open the collapsible panel from a separate page and it works beautifullly. The problem I have is that I want the browser to move down to a specific named anchor inside that opened collapsible panel when clicked from a different page.
Snippets of my current code here.
Below is the code that I have on an image that when clicked goes to the correct page and opens Panel1. Works Perfectly!
<a href="bamboo-species.php?col1=open#CollapsiblePanel1"><img src="images/Content/Photos/HomeScroll/blackTmbor.jpg" width="227" height="175" /></a>
Below is the link to the .js file and the script in the head of the target page
<script type="text/javascript" src="SpryAssets/SpryURLUtils.js"></script>
<script type="text/javascript">
// Grabs the values of the URL parameters for the current URL.
var params = Spry.Utils.getLocationParamsAsObject();
</script>
Below is the code that I have on the target page for Panel1
<script type="text/javascript">
var CollapsiblePanel1 = new Spry.Widget.CollapsiblePanel("CollapsiblePanel1", {contentIsOpen:params.col1 ? true : false},{duration: 1000});
</script>
If I have a named anchor say <a name="species1" id="species1"></a> down in the page, how do I target that named anchor from my link on the separate page. I have tried adding the #species1 to the end of the link on the link page (see below) but with no luck. I believe those were the instructions on foundationphp.com site.
<a href="bamboo-species.php?col1=open#CollapsiblePanel1#species1"><img src="images/Content/Photos/HomeScroll/blackTmbor.jpg" width="227" height="175" /></a>
I hope (and suspect) that this is an easy fix, I just do not know what it is. Any help or direction where to look is greatly appreciated.

I once had the same issue can created a small function that allows me to "jump" to a element.
function scrollTo( element ){
     var stylize = function( element){ return !+"\v1" ? element.currentStyle : document.defaultView.getComputedStyle( element , null ) },
          getPosition = function( element ){
               // based on the SpryEffect's module:
               var computedStyle, tryComputedStyle,
                    position = { x: 0, y: 0 };
                    if ( element.style.left && /px/i.test(element.style.left) ){
                         position.x = parseInt(element.style.left, 10); // without padding
                    } else {
                         computedStyle = stylize( element );
                         var tryComputedStyle = computedStyle && computedStyle.left && /px/i.test( computedStyle.left );
                         if (tryComputedStyle)
                              position.x = parseInt( computedStyle.left, 10 ); // without padding, includes css
                         if(!tryComputedStyle || position.x == 0) // otherwise we might run into problems on safari and opera (mac only)
                              position.x = element.offsetLeft;   // includes padding
                    if ( element.style.top && /px/i.test(element.style.top) )
                         position.y = parseInt( element.style.top, 10); // without padding
                    else
                         if ( !computedStyle )
                              computedStyle = stylize( element );
                    var tryComputedStyle = computedStyle && computedStyle.top && /px/i.test( computedStyle.top );
                         if ( tryComputedStyle )
                              position.y = parseInt( computedStyle.top, 10 ); // without padding, includes css
                         if( !tryComputedStyle || position.y == 0 ) // otherwise we might run into problems on safari and opera (mac only)
                              position.y = element.offsetTop;   // includes padding
               return position;
          scroll( 0, getPosition( element ).y );
So now we have a scrollTo function that accepts a pure HTML element as argument, all what is left to do is figure out if we have a hash, and if the anchor exits on the page.
( hopes this works, i wrote it without testing, but you get the general idea ):
if( window.location.hash ){
     var hash = window.location.hash.substr(1), // remove the # from the hash
     element;
     // as anchors can also be used with id attributes, check that first,
     element = document.getElementById( hash );
     // maby we used name="" attribute
     if( !element && ( element = document.getElementsByName( hash )) ){
          element = element[0];
     // if we have a match:
     if( element ){
          // give the collapsible panel some time to init and update the DOM;
          setTimeout(function(){ scrollTo( element ) },0);
\o/

Links to id's and named anchors within a page in an iframe do not open in firefox

In order to force layout of my liquid website, I use i-frames to display content . It is all on my sight www.rdelutherie.com, and I am not displaying pages from other sights. The links to sections of pages from within the same page do not work in firefox.
I have had this problem before with named anchors, and in moving up to html5 and in making my site accessible for people with dissabilities, I started using <nav> eliments... and changed from named anchors to links to ID's like this:
In an unordered list I have these:
<pre><nowiki> <li><a href="#s1">Subject 1:</a></li>
</nowiki></pre>
They link to sections of the same page like this one:
<pre><nowiki>
<section id=s1>
<h2>Subject 1:</h2>
<p>Blah blah blaaaaah, and bla bla!</p>
</section></nowiki></pre>
Last time I researched this problem (a year or more ago), I was told that it was because of a security risk (something about being able to count views...and other peoples proprietary and copyrighted material), but the vaguely described reasoning made little to no sense to me nor many others, who can not even link to our own stuff. The Mozilla developers were rather abrupt and some were even rude in telling us to live with it, instead of trying to come up with a solution or work around, and closed the post and disallowed further posting.
The problem still persists, and although I am not a programmer, I have a real hard time believing that it is impossible for Firefox to distinguish between links contained within a document and site, from those on different sights, domains and what have you.
As far as I know, no other browsers have this problem, so if it is such a big security risk, what is to stop someone with malicious intentions, from just using M$ IE, to bring their evil plan to fruition?
In keeping with "Making the web a better place": Please address this problem, and find a solution, workaround, or at least explain why it is impossible.
Bob English

Thanks again jscher2000,
I know exactly what you mean, but I have had other page display problems with adjacent columns where one side does not display completely and seems to be conforming to the other ones height... hence the height settings and other tricks to force things to be acceptable.
I am far from understanding code, and most of the solutions, including the one in the link you posted do not have the information a novice like me would need to implement them successfully. Most of them are written for people much more advanced. Without it telling me where exactly to put the code, point to it, what I can (and should) change and remove elsewhere because of it... I am at a loss. I don't know the basics, and have tried hard to understand them, but it is not like electrical circuits, physics and other things that I can understand naturally and with ease.
I will look into it further in a few days, meanwhile I have to attend to my real work that doesn't even pay the bills completely: guitar building and repair, now that comes easy and naturally to me!

RE: Named anchored objects

Albert,
In my case I was using a named anchored object to get a handle to an actual
service object. My named object that I registered in the name service was
an intermediary to which I did not maintain a connection. So I have not
explicitly tested what you are asking.
However, I too was not using a hard coded reference to the SO, and fail over
and load balancing worked fine. The functions of fail over and load
balancing are not done by the service object but by the name service, proxy
and router. Since you are getting a proxy back any time you do a lookup in
the name service I would think that fail over should work with any anchored
object that is registered in the name service. When you do a RegisterObject
call you will notice that one of the arguments is the session duration,
which implies to me that fail over will be handled the same as for service
objects.
Load balancing adds another wrinkle. Load balancing is handled by a router.
You must get a proxy to the router and not a proxy to an instance of the
object that the router is doing the load balancing for. In the latter
scenario you will be bypassing the router. If you are creating, anchoring
and registering your objects dynamically you will not have a router so you
will not be able to load balance! This applies even if the objects are
instantiated within partitions that are load balanced because you will still
be getting proxies back to a particular instance of the anchored objects.
There are ways to accomplish load balancing between objects that you
register yourself. However, the best solution will vary depending on the
actual problem trying to be solved. If you would like to discuss this
further, include a little more detail about the scenario you need to
implement and I will give you what I know.
BTY what I have outlined above also applies to getting references via a
system agent.
Sean
Cornice Consulting, Inc.
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of Albert Dijk
Sent: Friday, July 03, 1998 11:01 AM
To: [email protected]
Subject:
Alex, David, Jez, Sean,...
My question about both solutions (using Nameservice and agents) is:
If I reach a remote service object using either a BindObject or an agent, do
fail-over and load-balancing work the same way as they normally do when
using a hard coded reference to the SO.
Albert Dijk
From: Sean Brown[SMTP:[email protected]]
Reply To: [email protected]
Sent: Thursday, June 25, 1998 6:55 AM
To: Ananiev, Alex; [email protected]
Subject: RE: multiple named objects with the same name and
interface
Alexander,
I can not comment on the speed difference because I never tested it.
But, I
will say that we looked at the agent solution at a client sight
before. I
will give the same warning I gave them. If you go the agent direction
you
are now using agents for a purpose that they were not intended. Even
though
it technically works, as soon as you start using a piece of
functionality in
a way the developer did not intend it to be used you run the risk of
forward
compatibility problems. By this I mean, since agents were not
originally
intended to be used to look up service / anchored object references,
it may
not work in the future because it is not likely to be given
consideration in
any future design.
As we all know, programmers are always stretching the bounds of the
tools
they use and you may have a good reason (i.e. performance). I just
wanted to
let you know the possible risk.
One final note on a limitation of using system agents to obtain
references
to anchored objects. You can not access agents across environments.
So, if
you have connected environments and need to get references to services
in
another environment for fail-over or whatever, you will not be able to
do it
with agents.
Just some thoughts!
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]]On">mailto:[email protected]]On</a> Behalf Of Ananiev, Alex
Sent: Wednesday, June 24, 1998 12:14 PM
To: '[email protected]'
Subject: RE: multiple named objects with the same name and interface
David,
The problem with dynamic binding is that in this case you have to keep
the reference to the service object somewhere. You don't want to call
"bindObject" every time you need to use this service object, "bind" is
a
time-consuming operation, even on the same partition. Keeping
reference
could be undesirable if your object could be moved across partitions
(e.g. business object).
The alternative solution is to use agents. You can create custom
agent,
make it a subagent of an active partition agent and use it as a
placeholder for whatever service you need. "FindSubAgent" works much
faster than "bindObject", we verified that and agent is "user-visible"
by its nature.
Alexander
From: "Sean Brown" <[email protected]>
Date: Wed, 24 Jun 1998 09:12:55 -0500
Subject: RE: multiple named objects with the same name and interface
David,
I actually determined it through testing. In my case I did not want
this to
happen and was trying to determine why it was happing. It makes sense
if
you think about it. Forte is trying to avoid making a remote method
invocation if it can.
Now, for anything more complex than looking locally first and if none
is
found give me any remote instance you can find, you will need to do
more
work. Using a naming scheme like Jez suggests below works well.
Sean
- -----Original Message-----
From: Jez Sygrove [<a href="mailto:[email protected]">mailto:[email protected]</a>]
Sent: Wednesday, June 24, 1998 4:34 AM
To: [email protected]; 'David Foote'
Cc: [email protected]
Subject: RE: multiple named objects with the same name and interface
David,
there's a mechanism used within SCAFFOLDS that allows the
location of the 'nearest' SO when more than one is available.
It involves registering each duplicated SO under three dynamically
built
names. The names include the partition, the node or the environment
name.
When wishing to locate the nearest SO the BO builds a SO name using
its
own partition and asks the name service for that.
If there is an SO registered under that name then it must be in the
same
partition and all is well. No cross partition calls.
If not, then the BO builds the name using its node and asks the name
service for that.
This means that if there is an SO outside the BO partition but still
on
the same node then this can be used. Again, relatively 'local'.
If neither of these work then the BO has to resort to an environment
wide search.
It may be that this approach could be adapted / adopted; I like it's
ingenuity.
Cheers,
Jez
From: David Foote[SMTP:[email protected]]
Reply To: David Foote
Sent: 24 June 1998 03:17
To: [email protected]
Cc: [email protected]
Subject: RE: multiple named objects with the same name and
interface
Sean,
First, thank you for your response. I have wondered about this fora
long time.
I looked at the documentation for ObjectLocationManager and on page
327
of the Framework Library and AppletSupport Library Guide indescribing
the BindObject method Forte says:
"The name service allows more than one anchored object (from
different
partitions) to be registered in the name service under the same
registration name. When you invoke the BindObject method with a
request
for a name that has duplicate registration entries, the BindObject
method finds an entry corresponding to an active partition, skipping
any
entries that do not. If no such active partition is found, or if the
requested name is not found in the name service registry, a
RemoteAccessException will be raised when the BindObject method is
invoked."
My question is: How did you discover that in the case of duplicate
registrations the naming service will return the local object if one
exists? This is not apparent from the documentation I have quoted.
Is
it documented elsewhere? Or did you determine it empirically?
David N. Foote,
Consultant
----Original Message Follows----
David,
First I will start by saying that this can be done by using named
anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get mostof
the
behavior you desire. When you do a lookup in the name service
(BindObject
method) it will first look in the local partition and see if thereis
a
local copy and give you that copy. By anchoring the object and
manually
registering it in the name service you are programmatically creating
your
own SO without defining it as such in the development environment.
BTW
in
response to your item number 1. This should be the case there as
well.
If
your "mobile" object is in the same partition where the serviceobject
he is
calling resides, you should get a handle to the local instance ofthe
service object.
Here is the catch, if you make a bind object call and there is no
local
copy
you will get a handle to a remote copy but you can not be sure which
one!
It end ups as more or less a random selection. Off the top of myhead
and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href=
"mailto:[email protected]]On">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There aretwo
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value
to
remote objects), cannot safely reference a Service Object unless it
has
environment visibility, but this forces the overhead of a remote
method
call when it might not otherwise be necessary. If it were possibleto
place a copy of the same Service Object (with user visibility) ineach
partition, the overhead of a remote method call could be avoided.
This
would only be useful for a service object whose state could besafely
replicated.
2) My second scenario also involves mobile objects referencing a
Service
Object, but this time I would like the behavior of the calledService
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same
name
and the same interface in each partition, but varying the
implementation
with the partition.
Does anyone have any thoughts about why this would be a good thingor
a
bad thing?
David N. Foote
Consultant
Alexander Ananiev
Claremont Technology Group
916-558-4127
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:<a href="http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>
>
>
Alexander Ananiev
Claremont Technology Group
916-558-4127
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Albert,
In my case I was using a named anchored object to get a handle to an actual
service object. My named object that I registered in the name service was
an intermediary to which I did not maintain a connection. So I have not
explicitly tested what you are asking.
However, I too was not using a hard coded reference to the SO, and fail over
and load balancing worked fine. The functions of fail over and load
balancing are not done by the service object but by the name service, proxy
and router. Since you are getting a proxy back any time you do a lookup in
the name service I would think that fail over should work with any anchored
object that is registered in the name service. When you do a RegisterObject
call you will notice that one of the arguments is the session duration,
which implies to me that fail over will be handled the same as for service
objects.
Load balancing adds another wrinkle. Load balancing is handled by a router.
You must get a proxy to the router and not a proxy to an instance of the
object that the router is doing the load balancing for. In the latter
scenario you will be bypassing the router. If you are creating, anchoring
and registering your objects dynamically you will not have a router so you
will not be able to load balance! This applies even if the objects are
instantiated within partitions that are load balanced because you will still
be getting proxies back to a particular instance of the anchored objects.
There are ways to accomplish load balancing between objects that you
register yourself. However, the best solution will vary depending on the
actual problem trying to be solved. If you would like to discuss this
further, include a little more detail about the scenario you need to
implement and I will give you what I know.
BTY what I have outlined above also applies to getting references via a
system agent.
Sean
Cornice Consulting, Inc.
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of Albert Dijk
Sent: Friday, July 03, 1998 11:01 AM
To: [email protected]
Subject:
Alex, David, Jez, Sean,...
My question about both solutions (using Nameservice and agents) is:
If I reach a remote service object using either a BindObject or an agent, do
fail-over and load-balancing work the same way as they normally do when
using a hard coded reference to the SO.
Albert Dijk
From: Sean Brown[SMTP:[email protected]]
Reply To: [email protected]
Sent: Thursday, June 25, 1998 6:55 AM
To: Ananiev, Alex; [email protected]
Subject: RE: multiple named objects with the same name and
interface
Alexander,
I can not comment on the speed difference because I never tested it.
But, I
will say that we looked at the agent solution at a client sight
before. I
will give the same warning I gave them. If you go the agent direction
you
are now using agents for a purpose that they were not intended. Even
though
it technically works, as soon as you start using a piece of
functionality in
a way the developer did not intend it to be used you run the risk of
forward
compatibility problems. By this I mean, since agents were not
originally
intended to be used to look up service / anchored object references,
it may
not work in the future because it is not likely to be given
consideration in
any future design.
As we all know, programmers are always stretching the bounds of the
tools
they use and you may have a good reason (i.e. performance). I just
wanted to
let you know the possible risk.
One final note on a limitation of using system agents to obtain
references
to anchored objects. You can not access agents across environments.
So, if
you have connected environments and need to get references to services
in
another environment for fail-over or whatever, you will not be able to
do it
with agents.
Just some thoughts!
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]]On">mailto:[email protected]]On</a> Behalf Of Ananiev, Alex
Sent: Wednesday, June 24, 1998 12:14 PM
To: '[email protected]'
Subject: RE: multiple named objects with the same name and interface
David,
The problem with dynamic binding is that in this case you have to keep
the reference to the service object somewhere. You don't want to call
"bindObject" every time you need to use this service object, "bind" is
a
time-consuming operation, even on the same partition. Keeping
reference
could be undesirable if your object could be moved across partitions
(e.g. business object).
The alternative solution is to use agents. You can create custom
agent,
make it a subagent of an active partition agent and use it as a
placeholder for whatever service you need. "FindSubAgent" works much
faster than "bindObject", we verified that and agent is "user-visible"
by its nature.
Alexander
From: "Sean Brown" <[email protected]>
Date: Wed, 24 Jun 1998 09:12:55 -0500
Subject: RE: multiple named objects with the same name and interface
David,
I actually determined it through testing. In my case I did not want
this to
happen and was trying to determine why it was happing. It makes sense
if
you think about it. Forte is trying to avoid making a remote method
invocation if it can.
Now, for anything more complex than looking locally first and if none
is
found give me any remote instance you can find, you will need to do
more
work. Using a naming scheme like Jez suggests below works well.
Sean
- -----Original Message-----
From: Jez Sygrove [<a href="mailto:[email protected]">mailto:[email protected]</a>]
Sent: Wednesday, June 24, 1998 4:34 AM
To: [email protected]; 'David Foote'
Cc: [email protected]
Subject: RE: multiple named objects with the same name and interface
David,
there's a mechanism used within SCAFFOLDS that allows the
location of the 'nearest' SO when more than one is available.
It involves registering each duplicated SO under three dynamically
built
names. The names include the partition, the node or the environment
name.
When wishing to locate the nearest SO the BO builds a SO name using
its
own partition and asks the name service for that.
If there is an SO registered under that name then it must be in the
same
partition and all is well. No cross partition calls.
If not, then the BO builds the name using its node and asks the name
service for that.
This means that if there is an SO outside the BO partition but still
on
the same node then this can be used. Again, relatively 'local'.
If neither of these work then the BO has to resort to an environment
wide search.
It may be that this approach could be adapted / adopted; I like it's
ingenuity.
Cheers,
Jez
From: David Foote[SMTP:[email protected]]
Reply To: David Foote
Sent: 24 June 1998 03:17
To: [email protected]
Cc: [email protected]
Subject: RE: multiple named objects with the same name and
interface
Sean,
First, thank you for your response. I have wondered about this fora
long time.
I looked at the documentation for ObjectLocationManager and on page
327
of the Framework Library and AppletSupport Library Guide indescribing
the BindObject method Forte says:
"The name service allows more than one anchored object (from
different
partitions) to be registered in the name service under the same
registration name. When you invoke the BindObject method with a
request
for a name that has duplicate registration entries, the BindObject
method finds an entry corresponding to an active partition, skipping
any
entries that do not. If no such active partition is found, or if the
requested name is not found in the name service registry, a
RemoteAccessException will be raised when the BindObject method is
invoked."
My question is: How did you discover that in the case of duplicate
registrations the naming service will return the local object if one
exists? This is not apparent from the documentation I have quoted.
Is
it documented elsewhere? Or did you determine it empirically?
David N. Foote,
Consultant
----Original Message Follows----
David,
First I will start by saying that this can be done by using named
anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get mostof
the
behavior you desire. When you do a lookup in the name service
(BindObject
method) it will first look in the local partition and see if thereis
a
local copy and give you that copy. By anchoring the object and
manually
registering it in the name service you are programmatically creating
your
own SO without defining it as such in the development environment.
BTW
in
response to your item number 1. This should be the case there as
well.
If
your "mobile" object is in the same partition where the serviceobject
he is
calling resides, you should get a handle to the local instance ofthe
service object.
Here is the catch, if you make a bind object call and there is no
local
copy
you will get a handle to a remote copy but you can not be sure which
one!
It end ups as more or less a random selection. Off the top of myhead
and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href=
"mailto:[email protected]]On">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There aretwo
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value
to
remote objects), cannot safely reference a Service Object unless it
has
environment visibility, but this forces the overhead of a remote
method
call when it might not otherwise be necessary. If it were possibleto
place a copy of the same Service Object (with user visibility) ineach
partition, the overhead of a remote method call could be avoided.
This
would only be useful for a service object whose state could besafely
replicated.
2) My second scenario also involves mobile objects referencing a
Service
Object, but this time I would like the behavior of the calledService
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same
name
and the same interface in each partition, but varying the
implementation
with the partition.
Does anyone have any thoughts about why this would be a good thingor
a
bad thing?
David N. Foote
Consultant
Alexander Ananiev
Claremont Technology Group
916-558-4127
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:<a href="http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>
>
>
Alexander Ananiev
Claremont Technology Group
916-558-4127
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Named Anchor linking from another document

I made a Named Anchor and linked from some text in another document. Great. Worked just fine. The only thing is it doesn't display the named anchor at the top of the page.
In other words the footer is at the bottom of the page and the named anchor in the middle of the page... not at the top. Like a #top would be.
Anyway to get it to the top of the page? Do I just need more content under it?
Much appreciated!

Thanks for the help. I had no luck trying it out.
If possible, at: artdesignsneed.com/joeldoctor
Under menu choice "Treatment" then choose "TFP".... the first sentence has ..."Borderline PD developed..."
I wanted to link Borderline PD to:
Menu choice: Disorders... choose Personality... go down to "Cluster B" and there's Borderline PD.
The link worked but the named anchor "Borderline PD" is in the middle of the page.
Cheers if you can help.
If not, I'm going in the right direction.
Much appreciated.

Named Anchored Obj-Environment Failover

Hi to all,
We connect from EnvA to EnvB giving the user directory parameter as / and
set the Environment Search Path
as EnvA:EnvB. From both environments we start and register
'/glob/obj1' named anchored objects with the same name.
From a client we connect to EnvA and bind to'/glob/obj1' when we shutdown EnvA partition it fails-over to
EnvB. And then we restart EnvA partition. We restart/rebind the client and
try to use object. We see that it is using the EnvB object.
Although we started the primary environment object again.
It is not using the search path. Once we shutdown secondary environment
it starts using primary environment object.
When we try to use relative path when we are binding the object
First parameter ('glob/obj1') No first slash. Trying 3rd parameter
for bind function or just using environment search path, Is is not able to
find the object. From nsls command I figured out that
under the root directory
/forte/UUID of ENVA/node
/site
/UUID of ENVB
/glob/obj1
names are available. When we use relative path (without slash)
is it trying to find /glob/obj1 under the /forte/UUID of ENVA
but we are registering the name under the root.
What is the reason of this odd behaviour or is this a bug?
Any answer will be appreciated,

Hi Juliesmiley,
According to your description, I recommend you check the conditions required for an automatic failover.
• Primary replica and secondary replica are both configured for syschronous-commit mode and set to AUTOMATIC failover.
• All availability databases that are defined in the availability group must be in a SYNCHRONIZED state between the primary replica and the secondary replica.
• The Windows Server Failover Clustering (WSFC) cluster has quorum.
• The primary replica has become unavailable.
For more information, please review the following articles.
Failover and Failover Modes (AlwaysOn Availability Groups)
Troubleshooting automatic failover problems in SQL Server 2012 AlwaysOn environments
Thanks,
Lydia Zhang

RE: (forte-users) Named Anchored Obj-EnvironmentFailover

I did some playing around with this stuff as well. I can tell you a few
things.
1) The search path option of connected environments only works for SO's, not
for named anchors.
2) When EnvA creates a directory "/glob", which contains object "obj1", then
EnvA owns directory "/glob". Even after restarting environments. If EnvB
tries to add a subdirectory to "/glob" or inserts its own objects into this
path, then the situation becomes unstable. It doesn't immediately produce an
error, but things go wrong anyway. Is this a bug or expected behaviour? I
don't know. I just learned not to do this. Every environment must place it's
named anchors in it's own tree. Directories can't be shared.
3) I think the relative name "glob/obj1" should work, but only if you set
the ObjectLocationMgr to start looking at the root. Default, it will start
looking in it's own environment basepath. But I don't have any experience
with this.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
-----Original Message-----
From: Master Programmer [mailto:masterprghotmail.com]
Sent: Monday, January 08, 2001 11:13 PM
To: forte-userslists.xpedior.com
Subject: (forte-users) Named Anchored Obj-Environment Failover
Hi to all,
We connect from EnvA to EnvB giving the user directory parameter as / and
set the Environment Search Path
as EnvA:EnvB. From both environments we start and register
'/glob/obj1' named anchored objects with the same name.
From a client we connect to EnvA and bind to'/glob/obj1' when we shutdown EnvA partition it fails-over to
EnvB. And then we restart EnvA partition. We restart/rebind the client and
try to use object. We see that it is using the EnvB object.
Although we started the primary environment object again.
It is not using the search path. Once we shutdown secondary environment
it starts using primary environment object.
When we try to use relative path when we are binding the object
First parameter ('glob/obj1') No first slash. Trying 3rd parameter
for bind function or just using environment search path, Is is not able to
find the object. From nsls command I figured out that
under the root directory
/forte/UUID of ENVA/node
/site
/UUID of ENVB
/glob/obj1
names are available. When we use relative path (without slash)
is it trying to find /glob/obj1 under the /forte/UUID of ENVA
but we are registering the name under the root.
What is the reason of this odd behaviour or is this a bug?
Any answer will be appreciated,
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

I did some playing around with this stuff as well. I can tell you a few
things.
1) The search path option of connected environments only works for SO's, not
for named anchors.
2) When EnvA creates a directory "/glob", which contains object "obj1", then
EnvA owns directory "/glob". Even after restarting environments. If EnvB
tries to add a subdirectory to "/glob" or inserts its own objects into this
path, then the situation becomes unstable. It doesn't immediately produce an
error, but things go wrong anyway. Is this a bug or expected behaviour? I
don't know. I just learned not to do this. Every environment must place it's
named anchors in it's own tree. Directories can't be shared.
3) I think the relative name "glob/obj1" should work, but only if you set
the ObjectLocationMgr to start looking at the root. Default, it will start
looking in it's own environment basepath. But I don't have any experience
with this.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
-----Original Message-----
From: Master Programmer [mailto:masterprghotmail.com]
Sent: Monday, January 08, 2001 11:13 PM
To: forte-userslists.xpedior.com
Subject: (forte-users) Named Anchored Obj-Environment Failover
Hi to all,
We connect from EnvA to EnvB giving the user directory parameter as / and
set the Environment Search Path
as EnvA:EnvB. From both environments we start and register
'/glob/obj1' named anchored objects with the same name.
From a client we connect to EnvA and bind to'/glob/obj1' when we shutdown EnvA partition it fails-over to
EnvB. And then we restart EnvA partition. We restart/rebind the client and
try to use object. We see that it is using the EnvB object.
Although we started the primary environment object again.
It is not using the search path. Once we shutdown secondary environment
it starts using primary environment object.
When we try to use relative path when we are binding the object
First parameter ('glob/obj1') No first slash. Trying 3rd parameter
for bind function or just using environment search path, Is is not able to
find the object. From nsls command I figured out that
under the root directory
/forte/UUID of ENVA/node
/site
/UUID of ENVB
/glob/obj1
names are available. When we use relative path (without slash)
is it trying to find /glob/obj1 under the /forte/UUID of ENVA
but we are registering the name under the root.
What is the reason of this odd behaviour or is this a bug?
Any answer will be appreciated,
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

How to close one browser window and return to a named anchor on a page in another window

I'm working on a website that has several book images at the bottom of each page. I have set it up so when the user clicks on a book another smaller browser window opens up with a description of the book. At the bottom of book description window, I have a close button which I added the window.close() behavior to. But I'd like to not just have the window close but return the user to the bottom of the original page where I have the books, an area that I have applied a named anchor to. Any ideas on how I can get this done.
I'd appreciate any and all help.

I haven't tried to customize this lightbox extension much. But I'm pretty sure the size of the box is pre-determined by image size. Bigger image, bigger box. And that is coded into one of the Lightbox javascript libraries.
As to placing a link in the caption, sure. Just paste your html link code into the Lightbox Caption Panel like so.
<a href="http://amazon.com"> Buy now from Amazon</a>
There is much more detailed information about Lightbox and how it works at the huddled together website.
http://www.huddletogether.com/projects/lightbox/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Link to named anchor in current file not working

Links to named anchors are not working at this particular site. Works with Konqueror.
Go to this web site: http://www.kusc.org/playlist/
Right below the calendar displays is a section "Playing this Hour" and below is list hours for AM and PM. You should be able to click one of the hours and page should skip down to that hour in the playlist. This doesn't work with FIREFOX 7. Has not work since FIREFOX 5 or 6 at least. Works with other browsers.
Executing FIREFOX 7.0 on openSUSE 11.4. Mouseover shows the link as an anchor with #. Although, the referenced page is not the same. But again, this works with Konqueror on Linux and IE on Windows.

Something to do with your coding. The page we opens is HTML not a PDF file. When we click on the links, it opens the PDF. I can see that destination tag along with the URL and the PDF is properly bookmarked. So check ur code.

Animate within a symbol using "named anchors"

hi everyone,
i would like to set up navigation of 3 colored buttons (red, blue & green) that will scroll on mouse down to the corresponding large colored rectangle.
https://www.yousendit.com/download/UVJnUGhlZ2owMEhFdzhUQw
in the below link, there is a file that i was able to make the blue & green buttons work if pressed from when the page first opens in the browser.
but how to get the buttons to work if you are on "green" and want to go to "blue" or "red"?
thank you all for your help
-sharon
ps- in Muse or Flash this is called "named anchors". I'm not sure what to call it in Edge
-s

hi everyone,
i just noticed that i was missing the EA file in the link. Below is a link with the native file included: (3_buttons_3-6-13a.zip)
https://www.yousendit.com/download/UVJnUGhTVnNCSnA4SjhUQw
i also tried another approach that seems like it should work, but doesn't. Below is the link: (v6_3-buttons_3-9-13.zip)
https://www.yousendit.com/download/UVJnUGhTVnNoMldybHNUQw
i would greatly appriciate your help getting either of these 2 versions to work
thank you very much-
sharon

Named Anchors not working in Safari

Has anyone found a work around for named anchors not working in Safari?
For example:
<http://www.macbenimble.com/links.html#browsers>
Would be greatly appreciated if anyone has any info re this?
hollie

That particular page fails the w3c validator: "This page is not Valid XHTML 1.0 Transitional!" Safari is one of the least forgiving of browsers for code that is not correctly written to standards. You might want to put your pages through the validator and look at the list of generated errors.
Named anchors do work in Safari, for example is this web site faq.

Named Anchors not working in Apple Mail

Hi... we have an HTML Email Newsletter. About 2 months ago the named anchors (links) from the top to different parts of the email stopped working right. For years, named anchors would simply go to the section of the email that you desired. The location of the anchor would appear at the top of the email window. Recently, the links have still worked, but Apple Mail would put the location at the bottom of the email, requiring the user to scroll down to see the content. And even more recently, now we have to double-click the link at the top to get it to work, and still incorrectly.
At first, this seemed to only not work in system 10.6. But now it's working the same way in 10.5. I am surprised a web search hasn't found anyone else with this problem. It affects not only our emails, but any email that has a link from the top of the email to any other part of the email.
Is this just a bug in Apple Mail or is there a fix? Thanks in advance!

I have exactly this same problem - anchors now move the cursor so that the desired text is just off the bottom of the message window, and one has to scroll to see it.
This is obviously an error - it is inconsistent with all web / anchor behavior I am familiar with.
What's going on?????

Html link to a named anchor within a PDF file?

So, I want a link on a web page to hop to a specific part of
a pdf file.
Same thing as using named anchors really. The issue I see
here is that the
web pag (link) has no real notion of pdf's implementation of
anchors, so how
could it know to utilise them?
I assume this is not possible, but need to make sure.
Thanks.

It is possible. You can link to a page in any pdf document,
or link to a 'Named Destination'
http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf

Reating an HTML Table Contents using named Anchors

I have a on website:
http://www.vpea.org/Bylaws/Test/bylaws_toc.htm
a table of contents for our Association Bylaws. Just in case
I've created named anchors using titles such as article_I,
article_II, etc.
is there anyway to make when clicking on a given TOC entry
that it will go to that point perhaps highligting it, going to that
point the document?

firstly, if you have multiple rows.. you need to start each row with <tr> and end with a </tr>. You just have one in the beginning and end,which will obivously give data in one row.
out.println("<tr>");
for (int a = 0 ; a < log.length; a++) {
for (int b = 0 ; b < 4; b++){
out.println("<td>" + (log[a]) +"</td>");
a++;
out.println("<td>" + (log[a]) +"</td>");
a++;
out.println("<td>" + (log[a]) +"</td>");
a++;
out.println("<td>" + (log[a]) +"</td>");
a++;
b++;
out.println("</tr>");

Using Named Anchors with Dynamic PHP Pages

I have a web app that uses PHP to generate pages out of a
MySWL database. The links to the page look something like:
www.domain.com/display.php?id=300.
On this page I'd like to include a link to an anchor towards
the bottom with a feedback form. I have a named anchor called
"add_rating". The link I'm using is
"www.domain.com/display.php?id=300#add_rating".
This link doesn't work in any browser/OS combination I've
tried and so it must be my code. Any help?

"
http://www.domain.com/display.php#add_rating?id=300''
(that's double quotes around)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Elie Chocron" <[email protected]> wrote in
message
news:gq8rb3$pqk$[email protected]..
>I have a web app that uses PHP to generate pages out of a
MySQL database.
>The
> links to the page look something like:
www.domain.com/display.php?id=300.
>
> On this page I'd like to include a link to an anchor
towards the bottom
> with a
> feedback form. I have a named anchor called
"add_rating". The link I'm
> using is
> "www.domain.com/display.php?id=300#add_rating".
>
> This link doesn't work in any browser/OS combination
I've tried and so it
> must
> be my code. Any help?
>

Handeling named anchors

Similar Messages

Maybe you are looking for