Handful of devices some work sometimes
I have a lot of devices Ipad, Ipad2, Mac book, Mac book air, Iphone, Imac, ect. Anyway we (my tech and I) are trying to get wireless setup. He is able to connect to the wireless using a laptop computer. It has windows XP and ubuntu linux on it. They connect and work without trouble. My apple devices are hit and miss. The ipad2 worked one day, then the next day it fell off the network and wouldn't reconnect. The same thing happened with the mac book air. The windows xp and linux always seem to connect.
He is wondering if we shouldn't just send back the wireless access point we purchased and buy an Airport because its made by apple. Apparentally he has been seting up wireless networks for a long time and has seen a problem like this in the past between linksys and dlink. Their devices were setup correctly but would fail to connect to each other. Once the products matched it works even though the setup really hasn't changed. What do you think?
802.11 is a universal standard so there shouldn't be a problem with that. I have set up a lot of WiFi networks and have never seen a problem like that (I have an AirPort Extreme and everything connects to it, I used to have a Netgear and everything connected to that etc.)
However, I would advise sending back the router as it appears faulty.
Similar Messages
-
Facetime, and multiple devices, some work some don't
I have sort of successfully downloaded Facetime onto my MacBook Pro and it works fine with iPhone. The iPhone works fine with my parents iPad. BUT I cannot get my MacBookPro to contact my parents iPad. Incidently I cannot edit the contacts within Facetime. Someone suggested changing the IDS no's but the ones suggested don't seem to make sense. Can anyone help?
When you edit your address book contacts info on your Macbook (e-mail, phone nimber,etc) it will be automatically imported into your FaceTime contacts list.
I assume that your parents ipad has an individual e-mail address id, apart from yours. If that's not the case, then you will not be able FT with them.
I do notice that many of the problems associated with FT seem to be related to folks using Macbooks, so it leads me to believe there may be a software issue involed, which can be frustrating to solve. -
I am unable to pair my Iphone 4 with my car stereo or hands free device. It worked preveiously; please help.
The item that was previousl paired is no longer seen by the hands free unit.
The new system, car stereo and Iphone see each other, but do not pair.
Hope this makes more sense and you have a fix!! -
Suddenly my ipad is unable to connect to our wifi. It buffers all the time?
All other devices are working normally. Is this a fault wityh my ipad or have I inadvertantly altered some setting?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Another Handoff not working - Apple has some work to do still
By the number of post I see about handoff problems…. it looks like Apple still has some work to do on this feature. I have read countless forum posts and replies and it seems that a large number of us are having trouble with this feature.
I have pulled all my hair out trying to sort this out…. not so much as I care about the feature as I am the type that can't stand it when I can't get something working.
My hardware is all supported 2012 MBP with Yosemite Bluetooth LMP 0x6
iPhone 5s
Same Wifi
Bluetooth on both devices
Both on same iCloud account turned on and active
Both have handoff enabled in respective settings
The only time I have been able to get it to work is when I wipe both iCloud accounts and then sign back on after a restart then I get the handoff dock icon when doing something like creating a new email. But it will works once or twice and then stops all together. Randomly sometime the icon will be on the lock screen of the iPhone.
Very frustrating Apple!
(Yea I know 1st world problem)Over the last week I have tried every "Windows Vista" combination of unchecking handoff, FaceTime, and signing in and out of iCloud while patting my head and rubbing my belly. And absolutely nothing worked. A few times I got handoff to work one time and then disappear again after a restore and power cycle but none of the countless tips I have read and seen worked.
Until today. I was listening to the iMore Podcast this week and they were ranting about all the people that are having continuity issues and one small blurb was mentioned that I had never heard, and this little gem was solving the handoff woes for some people. So what the heck I have tried everything else and this was simple enough.
The solution: Change the name of your iPhone. Setting>General>About>Name
I did this in combination with all the other Windows Vista Vudoo Handoff, FaceTime, iCloud off on both devices then power cycle.
Well once I restarted and got everything turned back on. It worked perfect…. everything single aspect is not working as Apple had intended it to work.
Go figure…. who would have thought???? -
When sighning in and out of an ios device some of the icloud data from the icloud account used to sighned in stays even after sighning out. Is it the same on pc icloud and if so how do you delete it. ( This is the online site by the way.)
Hi turintest2
Thanks for taking the time to respond - however your reply didn't really help as you haven't explained how to delete the compilation album that had been created.
I managed to sort it out by doing the following (I'm posting this so that it may help others). I don't know if this is the simplest/most elegant solution - but it works.
In iTunes, find the compilation (in my case, the 153 songs) and, starting with the first song, follow this procedure:
On the iPhone go to 'Songs' and scroll down the list until you find the first song that was listed in iTunes (above). You should notice (as in my case) that the song will have the correct title (and artwork too if you'd found this previously before making the compliation) but the wring artist.
Swipe LEFT and press the 'Delete' button.
Repeat with second song in iTunes list, deleting the individual songs from the iPhone, one by one.
Although tedious, this seemed to work for me. Reason for doing down the iTunes list is that it is in a pseudo-alphabetical order and I wanted to make sure I'd got every one.
Now busy re-importing the original albums from CD.
Thank you APPLE for making this such a laborious process. Why can't designers actually TEST the products they design so that they can appreciate first-hand the likely problems?
Anyhow, thanks turintest2 for trying to help me - it was appreciated.
RB -
HT201412 Message tones is not working sometimes
1.My iPhone 5 message tones is not working sometimes suddenly, have to restart device or eventhought sometimes is not working too after restart my device. I have to reset my iPhone n restore again .
2.Restore with iOS is not as good as last time coz I can't get back all my iOS photo stream photos n all the photo in my albums too. This is ***** n takes few days also not complete download all of my photos.
3.some of my iPhone apps will suddenly not respond or will log out to home screen suddenly . Have to open the apps few times only its working as normal .Hi,
I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
Regards,
Klaus -
Hey there... I need to get a hand held device (palm or similar), nevertheless, I want to make sure the one I get is 110% compatible with my mac OS and entourage... I am pretty new with mac (although I do consider I have got the hang of it now) and when I bought my mbp I had a terrible time changing all my info from my pc... Although most of the applications stated they where 100% compatible, they actually weren't... I do not want this to happend to me again... Any sugestions? I am prepared to pay a hefty price as long as it really works and makes my "complicated" life a bit simpler...
Thanks in advance...MarkSpace The Missing Sync works very well for Palm. I can't say the same for Pocket PC as I've never used it.
I've previously had a Pocket PC and used PocketMac Pro. It took them over 8 months to produce a universal binary, so I bought a Palm instead.
PocketMac Pro does boast Entourage compatibility though.
Honestly, I'd get a Palm (I'm partial to the Treo 700p and the T|X, I own both and they're phenomenal) and Missing Sync. DO NOT INSTALL PALM DESKTOP, and then just use Missing Sync. I am not sure the compatibility with Entourage, but just check their website (it's great) and see what you can find.
It's a great program, I'd highly recommend it! Always remember the only device "truly" compatible with OS-X is Palm OS - Windows is made to work with windows, and you will always have SOME sort of problem with connectivity.
Good luck with your purchase!
Edit: The markspace website says it has conduit support for Entourage 2004. -
Bluetooth device stopped working suddenly.
Hello,
My bluetooth controller was working till yesterday and stopped working suddenly today i am not sure what caused the problem, I use a bluetooth headset and when i tried to connect it today i saw that it was failing and when i tried to reboot the system then everything is gone, the logs seems to throw some strange errors. Please see my system configuration below.
Linux computergeek 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
I can see the bluetooth device in the "lsusb".
Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Also i can see the "btusb" module is loaded properly and I haven't upgraded my kernel recently.
But "hciconfig" and "hcitool" gives me below error and i cannot bring the hci0 interace up.
[root@computergeek]# hciconfig -a hci0
hci0: Type: BR/EDR Bus: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:4 errors:1
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: SLAVE ACCEPT
[root@computergeek]# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
[root@computergeek]# hcitool dev
Devices:
From Bluetooth control,
[root@computergeek]# bluetooth
bluetooth = on
[root@computergeek]# bluetoothctl
[bluetooth]# power on
No default controller available
[bluetooth]#
My "dmesg" output says this.
[ 4510.619589] Bluetooth: hci0 urb ffff8800ae373240 failed to resubmit (113)
[ 4510.619959] Bluetooth: hci0 urb ffff8800ae373300 failed to resubmit (113)
I tried every solutions on the other thread but nothing seems to help!
Any help would be greatly appreciated!!
Thanks
Last edited by vpraveenn (2015-02-17 21:05:16)I have the same bluetooth controller (0cf3:3005, Atheros AR3011) on my laptop (ASUS K53SV) and have the exact same problem. Bluetooth works for a while until tx errors start showing up:
[24952.326871] Bluetooth: hci0 command 0x0c1a tx timeout
[24954.332842] Bluetooth: hci0 command 0x0c52 tx timeout
[24956.338826] Bluetooth: hci0 command 0x0c24 tx timeout
[24958.344882] Bluetooth: hci0 command 0x0405 tx timeout
[24993.806536] Bluetooth: hci0 command 0x0408 tx timeout
[25033.899824] Bluetooth: hci0 command 0x0408 tx timeout
[25048.548327] Bluetooth: hci0 command 0x0c14 tx timeout
[25051.014213] Bluetooth: hci0 command 0x0c14 tx timeout
[25075.805968] Bluetooth: hci0 command 0x0408 tx timeout
Resetting the bluetooth device works sometimes but not always. There is always a chance that the device will just become unresponsive to any kinds of commands:
# hciconfig hci0 reset
Can't init device hci0: Connection timed out (110)
I've tried various methods (block/unblock them with rfkill, `rmmod btusb` & `modprobe btusb`, etc) but none works after the device is "dead". The only way to recover seems to be powering off the laptop (simply rebooting doesn't fix the problem).
Last edited by PkmX (2015-02-18 14:55:38) -
Syncing of Notes is very inconsistent - sometimes works, sometimes not
The syncing of notes is inconsistent. Sometimes it syncs properly, sometimes not. I had a note with a food list, deleted stuff on the phone, and the sync brought back all the stuff I had deleted. I tried syncing with Mail not running and same deal - sometimes it works, sometimes not. It seems to work better if I edit the note on the Mac. In that case the changes always seem to work.
Hello caryehart,
It sounds like your touchscreen is erratically functioning for you. I recommend the troubleshooting in the following article:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
If it comes down to contacting Apple with the above link, I would recommend you backup and restore your iPhone as a new device:
iOS: How to back up your data and set up your device as a new device
If it seems to function correctly after that, I would restore the backup and either verify that it still works, or isolate the issue to the backup itself.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy -
My safari doesn't work sometimes, but I connect with the internet.
my safari doesn't work sometimes, but I connect with the internet. Some of the videos I can't see with the Safari browser, but I can see it with other brower. But my friend can see these videos with her safari. And I can not connect with the app store sometimes.
Before you try to configure the settings on your Router, first thing which you need to do is, Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...
Connect the Modem to the Linksys Router on the Internet Port and then connect your computer to the Linksys router on the LAN Port 1. On your Computer click on Start - Run - CMD and click Ok... Now in the Command Prompt window type "ipconfig" and hit enter and note down the "IP address, Subnet Mask and Default Gateway" , Now again in the Command Prompt window type "ping default gateway IP" and hit enter and check if you are getting any replies, If yes then you can login to the setup page of the configure all the settings on it from scratch.
If your Internet Service Provider is Cable follow this link -
Ichat 4.0 Sometimes works, sometimes doesn't
Hello,
I have asked many firewall questions on this forum before. At this stage, what seems to work are the appletest servers, both video and voice. But...I have many friends that have accounts that sometimes work, sometimes don't. With no changes whatsoever to the firewall or computers. These users that I try to contact run the gamut from aim on windows, to ichat on tiger, to ichat on leopard. And again, sometimes will work, sometimes not.
I found an article on the web that states that multiple computers on your home network with the same user id's could cause this issue....Is that true? I have a 5 mac household, and the user id's are all the same. Now I'm only logged into ichat as me on my computer, so I'm not sure how that could happen.
I have read the docs about ports to open, and I have opened them all, and then some, because I have found that sometimes ichat demands a port to be open that has nothing to do with those listed.
Any clues?I have comcast as a service provider. They provide the modem. I have my own computer based router, running freebsd. I have full control over the firewall. I am running NAT inside the firewall. I have seen this behavior with both the firewall disabled, and with the ports I have opened. What is crazy is that while watching the security logs, when I test an account that doesn't work, I'll get a UDP deny on some arbitrary port that isn't supposed to be used by ichat.
-
i have an iphone 5 that i traded with from a family member. its has coverage but now the sleep/wake button doesnt work sometimes. can apple replace my iphone and give me a new one or is it just something they can repair? i dont have the box or recipit to apple care or the iphone
Apple can fix it without your receipt or box. They pull the serial number from the device and determine warranty status from that. Hopefully ApplCare was registered to the product before you lost the receipt though. If not, you can go back to the point of purchase and obtain your AppleCare receipt and Apple can help attach it to the iPhone.
-
I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.
I had this problem and what I did was: read the user manual. I was actually using the wrong buttons to put the Tri-BC200 on pairing mode. I also boot my I phone. Everything worked OK. Regards.
Maybe you are looking for
-
Hi all, I've got a 17" iMac 800 that I'm looking to hookup to a TV. I've got an array of inputs to play with on the TV, so I'm looking at s-video right now. I know there is an adapter that takes the mini-VGA port and outputs direct to s-video/composi
-
Will Airport Extreme Network with Panasonic Viera TC-P50ST30
Will Airport Extreme Network work properly with Panasonic Viera TC-P50ST30 HDTV?
-
Can I add a downloadable PDF file to my website created in i.web?
-
Projects won't open, pp cs5.5 crashes
I have a new iMac (i5, 8 gb ram, 2 gb video card) and pp5.5, using avchd video footage. I create a project, works great...close the file and when I try to open the project again pp crashes. Every project I have created since I bought the computer and
-
How do I make a VPN configuration for my iPod touch 5?
I Need a VPN