Handful of saved up questions

As before, G5 Mac, last version of Tiger, GoLive 7.
With help here I think I've solved the table/cells template page to show thumbnails of portfolio pieces which will link to larger versions. All base-align on the left.
These are my remaining questions which I've saved to put in one query:
1. To move type from the edges of a cell, I go to Type > Alignment > Increase Block indent--which is supposed to increase it "incrementally." The increment I get is gigantic and I see no control for adjusting it. Is there?
2. Each cell in my table, now 4 rows x 4 columns, has a thin black border which looks fine in Layout view and in two browsers so far. I have no idea how I ended up with a fine black cell outline but I am happy to keep it. If I place a thumbnail that does not fill the height of the cell, is there a way to move the outline down from the top of the cell to the top of the thumbnail?
3. I am showing my work in different categories. If category X, say, Ads, has 13 items, my page of 16 cells shows three, outlined, empty cells. I have found NO way to delete 1, 2, or 3 cells, but only a whole row. (I can cheat by putting a "message" in a blank cell but I'd rather just delete the empty ones.) Can I delete individual cells? How?
4. What I read suggests that in a template I can't change anything. I doubt that's true. But if I open a new page from a 16-cell template, can I still bring in new thumbnails into the cells on that page?
Oops!--I tried it. I get a message saying that there are no "editable" parts of the template. Must I select each of the 16 cells, or maybe the table as a unit and mark it as editable? Or should I just save it as regular page and dupe it as I need it and forget the whole template thing?
5. In a few test cases, the cell is 152 pxl tall, the art is 153, says the Inspector. Yet the art does not go all the way to the top of the cell. Speak of counterintuitive! What am I doing wrong?
Related, and last:
6. If I simply drag a thumbnail into a cell, for some reason, it sits in the bottom of the cell, that is, the top of the thumbnail is near the bottom of the cell. If I wait a second, the full thumbnail pops up and fills the cell properly. I can live with this weirdness. But can I avoid it?
Thanks much.

> For this one, we'd surely need to see the code Murray. Do you prefer a screenshot, so you can see the indents? If so, how do I include an "attachment" here? If I simply copy and paste--well--let's try it below, maybe it'll work (learning as I go, kind of like an ongoing mini-drama): This has my scans, all at 120 pxl wide, as a test, in some of the cells. Hmm...looks OK except for no color. <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html;charset=iso-8859-1"> <meta name="generator" content="Adobe GoLive"> <title>Untitled Page</title> </head> <body bgcolor="#ffffff"> <div align="center"> <csobj csref="../Components/NavBarCentered.html" h="143" occur="12" t="Component" w="619"> <table width="560" border="0" cellspacing="0" cellpadding="0" cool gridx="16" gridy="16" height="125" showgridx showgridy usegridx usegridy> <tr height="5"> <td width="3" height="129" rowspan="2"></td> <td width="556" height="130" rowspan="3" valign="top" align="left" xpos="3"><img src="../Components/Abouttitlebar.gif" usemap="#Good page" livesrc="../../Creative%20notes/2008%20visual%20ideas/About%20x4%20for%20GoLive/About%20t itle%20bar.pdf" alt="" height="130" width="552" border="0"></td> <td width="1" height="5"><spacer type="block" width="1" height="5"></td> </tr> <tr height="124"> <td width="1" height="124"><spacer type="block" width="1" height="124"></td> </tr> <tr height="1" cntrlrow> <td width="3" height="1"><spacer type="block" width="3" height="1"></td> <td width="1" height="1"></td> </tr> </table> <map name="Good page"><area title="CreativeProcess.html page link" shape="rect" coords="415,14,531,126" href="../../daddydesktop/CreativeProcess.html" alt=""><area title="Learn.html page link" shape="rect" coords="280,14,401,126" href="../../daddydesktop/Learn.html" alt=""><area title="Bad.html page link" shape="rect" coords="161,13,271,126" href="../../daddydesktop/Bad.html" alt=""><area title="Good.html page link" shape="rect" coords="31,13,155,126" href="../../daddydesktop/Good.html" alt=""></map></csobj> <table width="532" border="1" cellspacing="8" cellpadding="0" height="660"> <tr height="152"> <td align="left" valign="bottom" width="120" height="152">Tuesday template does it wrap properly? Yes!</td> <td align="center" valign="top" bgcolor="#ff6600" width="120" height="152"> <h1>Ads</h1> </td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/Aisles%26Piles. jpg" alt="" width="120" height="49" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/AnimalCruelty.j pg" alt="" width="120" height="152" border="0"></td> </tr> <tr height="152"> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/ArtDirAnnualCov er.jpg" alt="" width="120" height="158" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/ArtDirectionCov er.jpg" alt="" width="120" height="162" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BBA%20Forum%20p 8.jpg" alt="" width="120" height="151" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BBAforump1.jpg" alt="" width="120" height="150" border="0"></td> </tr> <tr height="152"> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BBAspeakerQuote s.jpg" alt="" width="120" height="123" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BMWputtpurr.jpg " alt="" width="120" height="156" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BobcatsHard-ass Slogan2.jpg" alt="" width="120" height="155" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BoysClubsChairm en.jpg" alt="" width="120" height="131" border="0"></td> </tr> <tr height="152"> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BoysClubsHelpHi mCover.jpg" alt="" width="120" height="158" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BoysClubsTheClu b.jpg" alt="" width="120" height="131" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/BoysClubsTheClu b.jpg" alt="" width="120" height="131" border="0"></td> <td align="left" valign="bottom" width="120" height="152"><img src="file:///DDTP/Scans%20%3e%20Web:iDVD/Scan%205.%20120%20pxl%2072%20dpi/C%26RBoring%20p 1.jpg" alt="" width="120" height="152" border="0"></td> </tr> </table> </div> </body> </html>

Similar Messages

File Saving.. question about Mac and Windows..

Hi all!
Just a quick question, is there anything that needs to be considered between saving a file from a java application on either Mac or Windows? Or does java "do" the work and I don't have to worry?
So far I saved some text from using my application on a Mac but havent got to a PC yet, and would rather make the changes now..
Thanks

FYI, this is just on my iphone, not when I view through the web or on my iPad. This is how it looks on my iPhone though... 2 iCloud accounts? Please help.

Using comcast email - deleting email and saved mail questions

Hi,
I have Comcast set up and have two questions:
1. When I delete emails they go to the trash folder. How do I set up the email so that I do not have to go to the trash folder and delete them again?
2. I unchecked "save emails in sent folder" from Outlook Express and synced the email settings to the phone, yet sent emails are still being saved.
Please help!
Thanks!!

Regarding your first question, go to Settings > Mail, Contacts, Calendars.
Select your Comcast account.
Select Advanced for the account settings.
Under the Deleted Messages section at Remove, the options are:
Never
After one day
After one week
After one month
Regarding your second question, this type of setting is not transferred to the iPhone's Mail client. The accounts settings such as user name, password, and the incoming mail served for the account to check the account for new messages, and the account's SMTP server or the outgoing mail server settlngs to send messages with the account are transferred.
The iPhone's Mail client does not include a setting to not save messages sent with the account.

PHOTOSHOP CS5 file saving name question (.png .jpg)

Hi,
If I open a new file and go to save it the extension names show up (.jpg or .png). However, if I open an illustrator file in Photoshop and try to save it, the extension names are not there (it's saving them as the proper format, but I want the files to have the .jpg or .png in the name without me typing them in myself).
Anyone know why this is or how I can fix it?
(I tried flattening the image first. I made sure the file is in 8bit mode. I made sure the image is a RGB file too. But still, the extension part of the name (.jpg) is not showing up). Sometimes, it works for certain .ai files, but others it doesn't. Yet, they appear to be the exact same file type. I tried restarting Photoshop and restarting the computer. Still, for certain files it doesn't work.
Please see attached picture.

No, the fly window isn't hiding the file names.
For some reason, it seems to be only occurring to a set of files that I have in a certain folder. I believe I saved all these illustrator files the same way as other files (that are working properly - meaning the file extensions names are coming up for them).
Not sure why its just hiding the extension name on these certain files....?

ADF Faces: state saving method questions

Please, could somebody elaborate implementation of state saving in ADF Faces? What specially interests me is a way on which it is improved in comparison with RI. Will be current implementation further improved regarding size of state which is stored in session or on client?
Further, is it possible to make a read only page stateless? I tried naively to implement restore view phase listener which sets up transient property of view root to true. Page was rendered fine, but when I try to post something from that page NullPointerException was thrown from UIXComponentBase._getRendererImpl() method.
Tnx

Could you elaborate on the back button support?
I'm trying to do something very simple right now with two JSF pages using ADF BC/Faces. One page is a simple table allowing the user to select a row. The second page allows the user to view details on the selected row. This is view only at this point. I've found however, that if I select a row and go to the detail page and then hit the back button to return to the first page and then select another row and attempt to go to the detail page I get an error message like so:
1. validation - JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[1246992000 ]
2. validation - JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[1246992000 ]
I'm at a loss as to how to resolve this issue.
Thanks,
Corey

Saving document question

I have created a fillable form with Adobe Acrobat Professional 9. It is posted to our website for users to fill out, print, and save the completed form on their computer. What is happening is when they save it, any fields that are radio buttons revert back to the first choice. For example, if there is a choice for Yes, No, or Not Applicable and they chose Not Applicable, when they save the document the Yes button is checked. What am I missing on the form?
Thank you for your help.

You need to add permissions via the Extendend Features in Reader menu item. Please be aware that the license for its use extends to 500 uses of the pdf form. If you need more than that, you need to use a different and more expensive Adobe server-based product to enable the same features for significantly more money.
Mike

Daylight Saving Time Question

Dear all,
Is there a way to check if my database is using the timestamp with timezone.
I mean any query.
waiting for your reply.
Thnaks in advance.
MSD

See Metalink Note:412971.1 for the script you need

Nokia 6230 car hands free ACI question

hello there,
I was trying to connect my nokia 6230 to the car's audio AUX input in order to be able to listen to MP3.
I have a very good knowkedge in Electronics, so i did some changes in the hands-free car kit.
question is : I noticed that when the car kit is connected to the phone (& the car icon appears), the audio output becomes MONO, which means I can't really enjoy stereo MP3 (with my change I bypasssed the car kit's speaker output with relay only when call is active).
the audio out pins of the pop port are at pins 11-14.
BUT - again - when car kit is attached, output pins 13-14 are inactive (only mono from pins 11-12 is available)
does anyone know how to hack this further more so it becomes stereo ? (I guess it is something with the ACI protocol ?? (pin 3))
thanks,
TOM

The phone is only seeing your "modification" as the basic the mono headset. It needs to recognise the ACI chip in the headset, that tells the phone whats plugged in and therefore what audio paths to turn on. Unless you can mimic the ACI info (copywright infringement so be aware)the phone wont open the second audio path.Message Edited by megadodo on 06-Sep-200704:16 PM

Installed new hard drive and flashing question mark appears

I bought a new hard drive for my macbook pro (mid 2009) because my original harddrive bit the dust... I purchased it off of amazon which states that its specifically for macbooks and the reviews appeared to back it up. I saw a lot of people with great reviews of the same model of macbook that I have so I figured it was the best solution.. I connected the new hard drive but I am getting the dreaded flashing folder/question mark. Is this normal before re-installing the OS x? Heres the problem, I am out of town on business and do not have the original OSx disc on hand. So my question is, is the flashing question mark normal upon installing a new harddrive? and if so, is there away to install the OSx onto the new harddrive without the disc?
my macbook was running mavericks before the harddrive went to poo, however I did try to re-install mavericks before i ultimately realized that I needed to new harddrive. I noticed that rebooting my mac with command+r would give me the option to reinstall mavericks without a disc or anything. the next question I have is, would this still be do-able on the new harddrive? I tried the command+R option on the new harddrive but nothing happens.
Can someone help me out here, I am getting a little desperate as I have gone over a week without my mac and theres so crucial things I need to get done! Luckily I have all my stuff backed up on an external hard drive, I just need to get the mac running again. Thanks for taking time to read!

1. Yes, it is normal. If there's no OS on the drive, there's nothing to take the computer past that point.
2. No, there's no way on that Mac model. You need to use an existing system(see #4).
3. Not on that Mac model; it doesn't have the Internet Recovery system, and there isn't a recovery partition on the new drive.
4. If the backup drive contains a bootable clone of any compatible OS, or a Time Machine backup created from Mac OS X 10.8 or newer, connect it and restart the computer with the Option key held down. If it doesn't contain either, you can't.
(105476)

His please I'm having a problem with answering my questions ... I forget the answers . Please I want to know whate should I do????

Hi.. I have a problem with forgetting my answers for he questions ..what should I do please??????

Suggest you look through the 'More Like this" section (and the links within it) which is immediately to the right of your initial post. >>>>>>>>>
You could also enter 'Forgotten security answers' in the search box (Top right hand corner).
This question often comes up and there are many suggested answers. One other place to look for procedural ideas is
http://support.apple.com/kb/HE37

Few Questions About Migrating Site & Editing Many Pages at Once

OK. First things first. My manager doesn't want me listing
our company name in this post since we are currently trying to get
out of our hosting contract and she doesn't want to jeapordize
anything in case someone stumbled across the post by a search or
anything. FYI: I have Dreamweaver CS3.
So here's the deal. My company would like to move our site
away from this proprietary WYSIWYG online editor we have. The
current setup locks us into to this silly online editor for our
site and doesn't allow access to our files on their server. This
means that if I want to simply change the file name of a picture on
our site, I have to log in to their editor and go through about ten
stupid steps. The problem is, the site is dynamically generated.
Every page on the site looks something like this at the end:
default.aspx?pageid=9. Those links are permanently attached to
specific pages and the content on the individual pages rarely
changes. I tried using some offline downloaders to grab every page
of our site in case we move it elsewhere. When these pages are
downloaded, though, the file names change and it breaks all of the
links.
If I go into the code and change every individual link to
other pages and style sheets I can get it to look good.
So my first question is: is there a way to easily allow
Dreamweaver to import a couple hundred dynamically generated pages
and make them into static pages so that they just look like
"xyz.com/products.html"? Fortunately, our site is not extremely
large (maybe 250+ pages) so in an absolute worst case scenario I
could post a lot of the pages by hand.
My second question regards changing specific items across many
pages. Our current site contains the ability to place little
widgets into pages. This means that if we want a navigation bar on
a hundred different pages, we just edit the one entry for the
widget and every page changes. I'm sure this is possible in DW, but
I spent an hour trying to search online yesterday trying to find
info and didn't answer my question. Is this what templates are for?
I saw people mentioning Find All, but this didn't seem like a
perfect solution. I apologize if this is a very stupid question. No
one needs to take the time to explain the exact process to me, but
if someone could just tell me the name of the functionality and if
they know a specific resource to learn more about it, that would be
wonderful.
Whatever this functionality is, would I have to start over from
scratch with the pages? Or could I implement it with the current
site that's already put together? I'd be happy to convert the
site to static HTML if there's an easy way to change multiple pages
at once other than Find All and Replace.
Thank you so, so much for any help. I appreciate it. I just
want to make sure these things are possible before we start the
ball rolling down that path.

I think I could answer your questions with just one answer so
here it goes.
What you need to do when making this type of mass move from
an online editor to DW would be to first download a copy of
everything you have just so you have a backup in case any mistakes
are made.
Next with the downloading of the files. You will need to log
in via FTP in Dreamweaver or via your file manager on the control
panel of your website. If you are unsure of where this is or how to
log in via FTP, you may need to contact your host for the login
information. Even though the files appear to be dynamic I do
believe that most editors would just store the pages separately and
just uses includes to make that work. However, if this is not how
it appears, post back with the name of the editor that you were
using.
Next, take one of the files you have. Based on the
description you are giving me it sounds as if they all look the
same just with different content (nav bar aside). If this is the
case you can create a template file in Dreamweaver. Within that
template you should place the content that is the same for all of
your pages. Then make one editable region for your content to go
into. These links can be found from the main toolbar for creating
editable regions and other template functions (which I believe
includes the navbar).
Also one thing to note with templates is that they will
automatically fix links on the pages when you save the template to
include new files via links. So you don't have to worry about
updating all of the pages all of the time. The only thing you would
need to update the individual pages for would be for the content on
those pages.
Hopefully this will get you started in the right direction.
But as I said in the beginning if you have trouble getting the
files off of the site post a bit more information about what you
have and hopefully someone here will be able to point you in the
right direction.

Video capture w/ built in isight question

hi video experts,
hoping someone might be able to point me in the right direction for something I'd like to try out.. I'm an audio guy so am not up on what's out there on the video side of things....
I was wondering if there's any software that allows you to shoot high framerate video using the built-in isight on say a macbook pro, at something like DV res. I'm thinking at least 60fps but even higher would be great, like say 75fps, triple the framerate up from normal playback at 25. we're looking at shooting some video for a clip, and for the footage we have in mind, the webcam-ey look you get from the isight camera is the sort of look we want. but ideally we were hoping to be able to shoot at high speed (with music playback sped up correspondingly) so when you then play it back at the regular speed you get that realtime yet slow-mo look.
anyway, holding my newbie hat in hand and hoping my question is not too ridiculous, I hope someone can point me in the right direction of some software (shareware, a feature of final cut pro, some obscure quicktime authoring tool, whatever) that can pull off this sort of thing.
thanks for any pointers,
regards,
antonio

hi IDVD,
i think you are mistaken. the ISight didn't stop working everytime an update was done. What all of us mean was, it simply never work again after the initial update, that has causes the issue.
Mine stop working 2 months after i got my mac, it stop all by sudden, and it was only after going thru tons of threads, in this forum, that I realize the problem occur after a MAC update..
you have any solution for any one here, on how to get it back, even though it has disappeared from the system profiler? Apple have no clue and they suggest bring in down for repair.. unfortunately, not all have the luxury of parting with their desktop for even a day for repair, as work is crucial.. me for example..
Actually I have already given up on solving the problem, so if you do have a suggestion to resolve this issue, WITHOUT having to bring the comp in. I would be eternally grateful.

Question mark on my pictures.

I transferred some pictures into photoshop elements 13 from my pc
They have a small box on top left hand corner with yellow question mark
I believe this means the files are missing.
I have been back to my pc and they are not there any more.
How can I get these back?
Please help as I cannot move forward until I get help.
Thanks

Hi and thanks for helping,
It kind of helps and kind of doesn't.....it says never to move, rename or delete files or folder outside the software.
I may have done that
It also says if you remember the original name of the file/folder it may find it,
I tried that and nothing happened.
Bottom line is, do you know from what I said, that I cannot retrieve these photos at all, ever?
If that's the case I will let it be and move on (but I hope not)
Hope you can help once again Nickna12, I much appreciate.

Material Tax question

Good morning all.
Is there a way in P3 to
calculate taxes on materials?
I have input my
budget estimate into my schedule with the 12-digit cost
accounts; the 12th digit is "M" for material. I would like
P3 to add a 6.25% tax on all these items, because I don't
want to have to do it on approximately 300 line items
myself, by hand. Is this question clear? Please let me
know if someone knows a way to do this... Thanks!!
Bo

dear lakshmipathi,
thanks for the reply .solved my problem.
thanks very much . full points you
shankar

AWXML: More Questions (Description, Hierarchy)

Hi,
I would like to create an AW with the AWXML and have defined dimensions, a cube and a measure folder contaning the measures etc.
1. But I have problems to bring up the description (long or short) instead the dimension value itself comes up in the query builder. Which objects and which catalog objects has to be populated exactly? I have defined attributes for long and short, they look fine on the OLAP Worksheet, but still the dim. value is presented.
2. The ordering is alphabetical, I was thinking with an attribute ORDER (DEFAULT_ORDER) I could modify it, but no effects. Which objects and catalogs have to be populated exactly?
3. The hierarchy is missing it should have a YEAR and MONTH level for example but these are not presented in the dimension list and in the conditional steps. Which objects and catalogs have to be populated exactly?
4. In the documentation the DIM_HIERARCHIES is a valueset in the create AW it is a relation. Just a comment.
Important thing: I would just create the AW with the AWXML but loaded will the AW from a another AW, so no relational mapping is necessary!
Any ideas and comments would be appreciated.
Many thanks,
Heiko

It sounds like you might have the wrong doc. Which version of Analytic Workspace Manager (AWM) are you using and which manual? If you are using the hybrid version of AWM (10.1.0.3.OA), then you should have the OLAP Application Developerâs Guide B10333-03 (September 2004), which is the last time of documenting the creation of objects by hand.
About your questions... If you are trying to build a standard form analytic workspace (AW) by hand, itâs very complex. The new extension classes are not documented by definition. You should use the OLAP Analytic Workspace API (AWXML). Mapping is inconsequential. The real issue is getting the metadata defined correctly.
This changes once AWM2 releases. Here is some information about its description attributes:
BI Beans (QueryBuilder and CalcBuilder), Discoverer OLAP, and the Spreadsheet Add-In primarily use the Long Description attributes. If a dimension doesn't have this attribute, they will use dimension members (even if you have Short Description attributes). Spreadsheet Add-In uses Short Description attributes for the across edge, but end-users can change this behavior and use long descriptions instead. That is the only place that short descriptions are used.
By the way, it now looks like AWM2 will release around Feb 18th. The required RDBMS 10.1.0.4.0 patch set has been pushed back a couple weeks.

Handful of saved up questions

Similar Messages

Maybe you are looking for