Handle not valid for open spool request

Hello everyone,
i am facing an error while clicking the print preview option in change PO (me22n).
i have given the dispatch time in further data of o/p as 'Send with application own transaction'.
now, when i save and click print preview button i get an error as
"Handle not valid for open spool request"
Kindly give me some idea how to tackle this.
Thanks
gaurav

Gaurav,
I am having a similar issue and would appreciate if you could let us know how your problem was solved?
What control parameters did you change to make this work?
Thanks,
Jay

Similar Messages

  • Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

    Good morning,
    I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
    Installation goes plain until around the end of the progress bar, it stops on the setup of
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    I've put in my SkyDrive the error log I received after the install;
    I'm at full disposal if you need further information,
    thank you in advance
    Best regards
    Francesco

    Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above: 
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
    Then, I just got my account added as Local Admin and then tried to start the service and was able to.
    However, I am not sure whether same was the case for you.
    Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

  • ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1

    While doing a routine update from Lightroom 5.5 to v5.6 in Win 8.1, the installation halted at the start of the installation with the vague error message, "key not valid for use in specified state".  Although v5.5 was working just fine, the install routine deleted the v5.5 application files.  I rolled back to the previous system restore point (set just prior to the install) and recovered the executable files.  However, now the 5.5 files won't open the default catalog, none of the backups, or even create a new catalog.
    As v5.x was purchased as an update to v4.x, I've tried to reinstall the original Lightroom v4.x app from the factory disk.  I get the same error.
    Suggestions?
    Thanks. Dan

    I have a similar problem to Dan. while doing a routine upgrade from Lightroom 5.5 to 5.6 I got the
    : "key not valid for use in specified state"
    error and now Lightroom has completely disappeared. I've tried to uninstall, but there is nothing to uninstall. Going back to try to install the original 5.4 just results in the same error.
    A problem may have been that I closed Lightroom when the upgrade started to download. It then re-opened again when the install was halfway through., I assumed that was an error and closed it. just after that the error first appeared in the installer.
    I still had an older version of lightroom 4 installed. I've uninstalled it, and that didn't make any difference.
    I've also tried removing anything in the registry left over from the old installs and that didn't help either.
    Any suggestions?
    CHeers, Angus

  • TS1424 IOS 6 update completed.  Can't update apps now because I get warning stating "Your account is not valid for use in the Japanese store.  You must switch to the U.S. store before purchase."  How do I switch back?

    Ysterday I updated to the new IOS6 on my Iphone 4.  The phone service is provided by the Softbank carrier in Japan but I am an American and my Itunes account is U.S.  After the update I get this warning when trying to install app updates "Your account is not valid for use in the Japanese store.  You must switch to the U.S. store before purchase."  This is something that must have occured during the the IOS6 install so my question is how do I get my Iphone 4 to recognize the U.S. store again?

    Open the App Store and tap "featured", go down untill you see your Apple ID... enter there and tap "View Apple ID"... it should automatically ask you if you want to switch the store. Switch and thats all.

  • App store and itunes store are stuck in Japanese store. Says: Account not in Store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing.

    My app store and itunes store are stuck in Japanese store. I already moved to the Philippines for about a year ago and my stores still won't change its location.
    I already changed the region/country in my apple id. I tried to sign out and sign in back to my account. Tried it in app store, in itunes store, in settings app, in itunes in my laptop, in the apple website. It shows that my apple id is already set to Philippines, no matter where I sign in my account.
    The problem is when I open my app store (or itunes store) in my iphone, it appears that it is in the Philippines store; however, when I sign in my account (and I tried to sign in everywhere), I cannot download any app from the Philippine store. When I try to download an app, it always says "Account not in this store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing." I have read everywhere and most of the answers say that it should automatically direct me to the correct store. It doesn't happen to me, apparently.
    I have the same problem in both my iPhones. Both are iPhone 3GS and in version 5.1.1. I don't want to upgrade to iOS6 so please don't tell me to do so. Thanks!

    try logging out of of store and then log in again
    and check this out
    http://support.apple.com/kb/HT1311

  • 'This Serial number is not Valid for Photoshop CS6 Extended'

    'This Serial number is not Valid for Photoshop CS6 Extended'
    i did download the regular cs6 - but still keep getting this message
    what to do?
    Thanks!

    TravisWT wrote:
    Do i need to install the entire suite on the secound computer to access photoshop?…
    No, installing Photoshop alone would do, that would also install Bridge on your computer.  But you do have to download the whole-suite download to install Photoshop from it.  The individual Photoshop download will never accept your suite serial number.
    Incidentally, the "suite" concept is a fabrication of Adobe marketing and bean-counting types.  The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
    The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

  • Error "The serial number is not valid for this product" | Creative Suite

    HI together,
    I'm very annoyed about the fact that I payed for Adobe Creative Suite Production Premium 5 (EDU version) and now I'm not able to use it on my new Mac. The Support team (Chat) from Adobe told me several times that the product/serial or whatever was canceled but this doesn't help me to get the product working and I won't pay again for this software. So what's the reason for cancellation? I can't see reasons for this and I don't understand why Support team can't help me. Already found Error "The serial number is not valid for this product" | Creative Suite but this doesn't helped me.
    Regards
    René

    Maybe this is also useful... They told me I canceld this by myself which is not the truth. I had a Windows machine and used Creative Cloud as well but I only canceld the Cloud, not my Serial Number for Production Premium...
    So who is able to reactivate my Serial Number so that I'm able to use my product?
    info: Thank you for your patience.
    While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info: You are now chatting with Richa.
      Richa: Hello! Welcome to Adobe Customer Service.
      Richa: Sorry for any inconvenience this has caused
      Richa: May I get the serial number?
      Richa: Are we still connected?
      Richa: We have not heard from you for some time.  Do you wish to continue to chat?
      Richa: Are we still connected?
      Rene Pardon: hi
      Rene Pardon: for sure
      Rene Pardon: sorry, i took so much time for your answer that i decided to do anything else at this time
      Rene Pardon: <Deleted >
      Rene Pardon: i registered for the education version of production premium 5
      info: Your chat transcript will be sent to r*@*.de at the end of your chat.
      Richa: ok let me check
      Richa: please wait
      Richa: Thanks for your patinece
      Rene Pardon: do you also need my "authorization code" for this product?
      Richa: I need to transfer the chat to
      Richa: tech rteam
      Richa: please wait
      Rene Pardon: ok
      Richa: I am sorry
      Richa: But I will not be able to transfer the chat
      Rene Pardon: is there a phone number i can call?
      Richa: As the serial number is canceldd
      Richa: and we do apologise
      Rene Pardon: why was it canceled?
      Richa: but there is no phone support for this product
      Rene Pardon: i don't understand because i payed a lot for this
      Richa: Its showing canceled
      Rene Pardon: so what are the options?
      Rene Pardon: i need this product right now and i payed for it so why can't i use it?
      Rene Pardon: Your file '2015-03-30_Personalausweis_*.pdf' was successfully uploaded.
      Rene Pardon: as you can see, i'm the person who payed for this software
      Richa: I am sorry I just checked it
      Richa: it is canceled thats why you are getting invalid error
      Rene Pardon: yeah, that's what i see but i dont understan. why was it canceled? who is responsible for this mistake? it doesn't help me to tell me what i already see i need a solution to use the product
      Richa: I am sorry Rene
      Richa: But its showing canceld
      Richa: so cant help you with that
      Richa: I wish I could help you, but my hands are tied
      Rene Pardon: that's what you told me several times so who can help me?
      Rene Pardon: i'm very annoyed about this fact that i can't use the software i payed for and noone is able to help me getting this working
      Rene Pardon: so please tell me who is able to help me
      Richa: You need to place a new order?
      Rene Pardon: no, i won't pay AGAIN for this software i want a solution to use my already payed product
      Rene Pardon: please get someone in your team who can help me
      Richa: I am sorry Rene..
      Richa: But unfortunately my team can not help you on this.. as the sersil is expired
      Richa: I mean canceled
      Richa: Sorry but we can not help Rene..
      Rene Pardon: BUT WHY CAN'T YOU TELL ME WHY IT WAS CANCELED?
      Rene Pardon: Help me understanding...
      Rene Pardon: You're wasting my time!
      Richa: I am sorry
      Richa: I found the reason for cacnellation
      Richa: and its canceldd
      Richa: because you requested to cancel.  in year 2013
      Richa: On 30th april 2013
      Rene Pardon: but i only canceled the creative cloud, not my creative suite
      Richa: so we have refund and canceled it
      Richa: Its showing for this oserial?
      Rene Pardon: one moment
      Rene Pardon: i log into my account
      Rene Pardon: Your file 'Bildschirmfoto 2015-04-09 um 13.31.53.png' was successfully uploaded.
      Rene Pardon: As you can see the product is displayed as "non-canceled"
      Rene Pardon: I also bought the Createive Cloud during my time I had a Windows machine and this was the one i canceled - or I expected only this to get canceled
      Richa: I am sorry but the refund was given and requested for this
      Rene Pardon: There was only a refund for the Creative Cloud but not for the Creative Suite i bought
      Rene Pardon: And why should I need a serial number for the Creative Cloud?
      Rene Pardon: Please reactivate my Serial Number so that I'm able to use my product
      Richa: I can not do that?
      Rene Pardon: But i guess someone in your Team can
    Richa: can not help you

  • Long time for generating spool request for smartforms

    Hi,
    I'm have designed a  smartforms for printing a Receipt form. It takes about 1 minute for generating spool request after pressing the PRINT button in PRODUCTION Server only.
    The Code i used is below
    CALL FUNCTION lv_fname
      EXPORTING
          p_belnr                    = p_belnr
          p_bukrs                    = p_bukrs
          p_gjahr                    = p_gjahr
    EXCEPTIONS
       formatting_error           = 1
       internal_error             = 2
       send_error                 = 3
       user_canceled              = 4
       OTHERS                     = 5
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      Please help me out to sort this issue.
    Thanks,
    Ramesh
    Edited by: Rameshkumar Raamasamy on Mar 4, 2012 6:21 AM

    Hi Rameshkumar,
    you may look at the code sections of your smartform: If you have a lot more data in production than you have in development, it is especially important to use a fully specified primary key for any SELECTs.
    You may also ask your basis people to check if any performance warnings have been recorded with database system. This happens quite frequently that growing database tables cause problems when table spaces are not properly assigned or table sizes are not maintained adequately.
    Regards
    Clemens

  • My serial number is "not valid for subscription products", but of course it should be. how do I fix that?

    my serial number is "not valid for subscription products", but of course it should be. how do I fix that?

    Hello,
    general informations you will find there: https://www.adobe.com/account.html and this brandnew website:  Serial number and activation support.
    In case you bought your program from these firms like Amazon this "serial number" obtained from them is not a serial number, only a code with which you can request a serial number from Adobe.
    The following part, so I just see at least ceased to exist on my Adobe website, everything plays out in the link from above. I let it there as an info:
    Here you have to go through your "Adobe Store", and look for the button "Serial Number Request". Fill in the form and, after a while you will get a "real" serial number.
    Hans-Günter

  • Key not valid for use in specified state when running install_reader11_en_mssd_aaa_aih

    After downloading, Version XI (11.0.08)
    at
    http://get.adobe.com/reader/download/?installer=Reader_11.0.08_English_for_Windows&os=Wind ows%207&browser_type=KHTML&browser_dist=Chrome&d=McAfee_Security_Scan_Plus_Chrome_Browser& dualoffer=false
    running, and installing _reader11_en_mssd_aaa_aih
    I get "
    adobe reader installer error
    key not valid for use in specified state
    Using Windows 7, tried google chrome and firefox browsers
    system report created but could not send

    This worked:
    Solution 2: Re-create the Crypto folder.
    Close Acrobat. 
    In Windows Explorer, do one of the following:
    On Windows XP, navigate to C:\Documents and Settings\[your user name]\Application Data\Microsoft.
    On Windows Vista, navigate to C:\Users\[your user name]\AppData\Roaming\Microsoft.
    Note: These paths include hidden folders. To make hidden folders visible, see "Windows Tip - Show hidden files and folders" (TechNote kb402324).
    Rename the Crypto folder as Crypto Old. 
    Open Acrobat. The Crypto folder will be re-created automatically. 
    Error: "Creation of this signature could not be completed. Platform Exception" when you sign a PDF (Acrobat 8, 9 on Wind…
    Then deleted wse_andromenda files in control panel programs, run regedit

  • Key not valid for use in specified state - installation error

    I am trying to install Adobe Reader XI on a Windows 7 computer at work and I get this error message:  "key not valid for use in specified state."  What is going on and how do I fix the problem so that i can install Adobe Reader?

    This worked:
    Solution 2: Re-create the Crypto folder.
    Close Acrobat. 
    In Windows Explorer, do one of the following:
    On Windows XP, navigate to C:\Documents and Settings\[your user name]\Application Data\Microsoft.
    On Windows Vista, navigate to C:\Users\[your user name]\AppData\Roaming\Microsoft.
    Note: These paths include hidden folders. To make hidden folders visible, see "Windows Tip - Show hidden files and folders" (TechNote kb402324). 
    Rename the Crypto folder as Crypto Old. 
    Open Acrobat. The Crypto folder will be re-created automatically. 
    Error: "Creation of this signature could not be completed. Platform Exception" when you sign a PDF (Acrobat 8, 9 on Wind…
    Then deleted wse_andromenda files in control panel programs, run regedit

  • Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

    we have developed packages to do the followings
    Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
    we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
    We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
    say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
    For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
    We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
    While runing the package we are getting the following error message
    Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
    use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
    ilikemicrosoft

    Hi Surendiran,
    This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
    under a different user account.
    This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
    sensitive information using creator's account name.
    As a solution:
    Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
    OR
    Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
    to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
    OR
    The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
    back.
    Hope this helps. 
    Please mark the post as answered if it answers your question

  • SQL Server Mgt Studio 2008 installation problem - Key not valid for use in specified state

    I'm setting up SQL Server Management Studio 2008 on my laptop.  It installed fine, but failed to import a regsrver file exported from another machine. This appears to have been due to the fact that I exported the file with usernames and passwords, although I must admit that's pretty darned inconvenient if it can't be done. 
    Nevertheless, I exported the file again without usernames and passwords, but the new install now won't let me even see servers, let alone import any new ones.
    When I start Studio, it gives me the "Key not valid for use in specified state" error.  When I 'continue', I'm delivered to a screen with the 'registered servers' pane crippled.  It has no contents at all and no ability to add, select, import, export.  Nothing there.
    How do I rectify this?
    The installation is on Windows 7 Home Premium.
    Thanks for any suggestions.

    Hi Don,
    Since this issue was still not resolved even after you reinstall SQL Server 2008, I think that this issue is probably related to some corrupted files or registry keys. Please refer to the following steps to see if you can resolve this issue:
    1. Close your SSMS;
    2. Go to the folder %appdata%\Microsoft\Microsoft SQL Server\100\Tools\ and check if there is a Shell folder, if so, rename it to Shell-Copy;
    3. Re-open your SSMS to see if the error persists.
    Everytime SQL Server 2008 Management Studio starts, it will read information from this folder to retrieve and recover some data. If the information does not exists, it will recreate new ones. Please check if this helps.
    Best regards,
    Charles Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    To add to Don's comment, if you are using a different account (for example, an SA account) to run SQL Server management studio then make sure to change the user profile name when you browse to "%appdata%\Microsoft\Microsoft SQL Server\100\Tools\".
    I know many of us developers have multiple accounts and I usually have my SA account have logon privileges on databases not my regular AD Account.
    Other than that, the reason why this fails is because MS encrypted the regsrvr file on the source computer using the source computer's ID and is therefore unable to decrypt the file on the destination computer. To me that just doesn't make sense since the
    whole idea of Export and import was to move this information across computers! And that's why this works when you import without username and passwords - no more encryption/decryption. Since we use integrated windows logon (trusted_connection=true) it works
    great. For the few servers that we had SQL Logons I had to manually type them in and save. But all in all, pretty painless.

  • Site behind load balancer - Key not valid for use in specified state

    Hi,
    I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
    state exception. Stickiness is enabled on load balancer. verified that.
    I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
    Any pointers would help.
    Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

    Hi,
    As I understand, you encountered the error “Key not valid for use in specified state” when ADFS custom login.
    In order to run in Windows Azure Web Sites a Web application which uses WIF for handling authentication, you must change the default cookie protection method (DPAPI, not available on Windows Azure Web Sites) to something that will work in a farmed environment
    and with the IIS’ user profile load turned off.
    1. If you are using the Identity and Access Tools for VS2012, just go to the Configuration tab and check the box “Enable Web farm ready cookies”.
    2. If you want to do things by hand, add the following code snippet in your system.identitymodel/identityConfiguration element:
       <securityTokenHandlers>
         <add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler, 
                 System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
          <remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler,
                System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
        </securityTokenHandlers>
    There is a similar case:
    http://stackoverflow.com/questions/19323287/key-not-valid-for-use-in-specified-state-error-for-net-4-5-mvc-4-application
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Cannot export private key: "key not valid for use in specified state"

    Hi,
    This is a bit of a long story but I hope someone can give us some guidance.
    We use authentication certificates issued from our own Enterprise CA to control user and machine authentication via RADIUS/NPS for our wireless network.  Certificates are deployed via group policy/autoenrollment. In general this works well but
    we have an intermittent problem where user authentication stops working for a user who was fine before. The user certificate looks OK via Certmgr (shows as valid, shows that there is a private key associated with the certificate).  The NPS server
    logs show that the machine has been authenticated and granted access, but the user in this situation doesn't show up in the server logs at all. 
    The only solution in this case is to connect to the wired network and request a new certificate for the user (either via certmgr or just by deleting the duff cert and logging off/on again to get the cert via autoenrollment).
    The interesting thing is that while a "working" certificate can be exported with no problem, a duff certificate cannot be exported with its private key, giving the error "key not valid for use in specified state". (Obviously the certificates
    come from the same template, and the key is not marked unexportable).  The key files are present in %userprofile%\Appdata\Roaming\Microsoft\Crypto\RSA and the user permissions on these files look correct.
    After much searching of the forums I tried running certutil-repairstore on the duff certificate and that also returned the same error.  I also tried an undocumented switch Certutil -user -key -v and again, got a very similar error "Loadkeys returned
    key not valid for use in specified state. 0x8009000b (-2146893813)".
    I'm assuming that the fact that the key is unexportable/corrupt is also the reason why the certificate can no longer be used for authentication.
    Does anyone have any clues as to what might be causing this, and/or if a certificate with a key in this state can be repaired?
    Thanks!

    I can just share an experience I once had that was somewhat similar:
    In this case certificates could sometimes not be enrolled and the CSP came up with a related error message.
    The root was the software / driver (?) for a hardware dongle required to run some software. This "driver" added a registry key to the list of CSPs (under these HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider - but I have seen this with
    XP, so the exact location might be different now).
    This fake CSP entry that had quite a weird name effectively broke other CSPs. After removing the access to / generation of keys worked fine.
    So it would be interesting to know if you run some software that is "close to CSPs or cryptography".
    Elke

Maybe you are looking for

  • Controlling a send step in BPM

    Hi I have a BPM like in which the last step will be block starts( (syn)RFC -> container->) block ends ->transformation-> send and i need to send the message in the last send step..based upon on field in the RFC response, i used a switch step after th

  • Plant n storage location control

    Hi all, how can we control the plant and storage location control? If I creaet PO for one plant, I must not create PO to other plant. Thanks

  • Alias for discussions?

    I recently noticed that my Discussions alias has disappeared and my full name is now showing...I cannot for the life of me find where to change it back!

  • Is Lion's desktop switching really glitchy?

    I've been using Lion for almost a week now and it's pretty good. But I'm having a lot of trouble with the spaces replacement. It just seems really glitchy and very un-Apple like. For example, when switching from one desktop to another, the menubar sl

  • Why has T'bird has started 'not responding' intermittently for no apparent reason?

    This seems to associate with messages that T'bird is downloading messages from several different folders.