Handling errors in BAPI

Hi frnds i m unable to know the answer for the q?
How do u handle errors in BAPI.
i.e i m using standard BAPI po creation if some errors occurs then how to handle those errors
how can we know the errors.
plz reply me back frnds...
thnks...

Hi Sanjay,
   Call BAPI like this :
data: it_retrun typa table of bapireturn.
CALL FUNCTION 'BAPI_PO_CREATE'
EXPORTING
    po_header                        =
PO_HEADER_ADD_DATA               =
HEADER_ADD_DATA_RELEVANT         =
PO_ADDRESS                       =
SKIP_ITEMS_WITH_ERROR            = 'X'
ITEM_ADD_DATA_RELEVANT           =
HEADER_TECH_FIELDS               =
IMPORTING
PURCHASEORDER                    =
tables
    po_items                         =
PO_ITEM_ADD_DATA                 =
    po_item_schedules                =
PO_ITEM_ACCOUNT_ASSIGNMENT       =
PO_ITEM_TEXT                     =
   RETURN                           = it_return
PO_LIMITS                        =
PO_CONTRACT_LIMITS               =
PO_SERVICES                      =
PO_SRV_ACCASS_VALUES             =
PO_SERVICES_TEXT                 =
PO_BUSINESS_PARTNER              =
EXTENSIONIN                      =
POADDRDELIVERY                   =
IT_RETURN will contains all message returned from BAPI. For error message you can read IT_RETURN table where type = 'E'.
Thanks
Swagatika

Similar Messages

"E Specify either address number or address handle Error"

getting following Error
"E Specify either address number or address handle"
while using BAPI
"BAPI_SALESORDER_CREATEFROMDAT2"

Hi,
Check how you have filled the order_partners table.
Regards,
Bert

How to handle exceptions in BAPI

Dear Gurus,
Is there any specific way to handle exceptions in BAPI? I mean the way one handles exception in FM...can tat be applicable to BAPI or is there something specific.
Regards,
Shiku

The export parameter Return can be implemented as follows:
As a structure, whereby it must be defined in the function module as an export parameter, as well as in the method in the BOR.
As a table, whereby it must be defined in the function module as a table parameter, as well as in the method in the BOR as an export parameter.
Before filling the Return parameter you should either initialize the structure with CLEAR or the table with REFRESH and CLEAR.
If the return parameter is not set or is set to an initial value this means that no error has occurred.
The Return parameter may be based on the following reference structures:
BAPIRET2
You must use this reference structure when developing new BAPIS.
BAPIRET1, BAPIRETURN
These reference structures are still partly used in old BAPIs.
Both structures must be filled in the logon language.
Regards,
SuryaD.
Found this info for you shiku at http://help.sap.com/saphelp_46C/helpdata/EN/a5/3ec9f74ac011d1894e0000e829fbbd/content.htm.
Hope this was helpful.

How to handle errors in data templates

Hi
What is the recommended way to handle errors for example if one of your SQL statement in a data template returned no data how and where would you be able to create an error message for the user to find and read.
Thanks,
Mark

The closest I have come to doing this is to put conditional statements into the format template. If a value matches an expected (ex. is null) you can return a message (in the report) via the format template (ex. "No Data Found").
I am not sure this really answers your question as this is in the format template, but I generally view them as a matched pair that work together. I try to stick with data extraction in the data define, and do all my conditional stuff in the format templates.
Scott

A message will pop up (Exc in ev handl: Error: Bad NPObject as private data!) and the tab I was on will close out and reopen in a new window. Why is it happening and how do I stop it?

Okay, I will have a window open with 4 tabs open. At first, everything is fine, but after a day or so, a message will pop up on screen saying "'''Exc in ev handl: Error: Bad NPObject as private data!'''" and after you close it out, the tab you were on will close and reopen in it's own window. I then have to shut down all both old and new windows and open a new window with my original 4 tabs again. It will work fine until a few days pass and it starts over again.

This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Error during BAPI while uploading Material data through MM01

Hi all,
i am facing one problem when uploading Material data thorough BAPI in MM01.i am attaching the code below and the error given.
but in the debugger all the value is being stored.
REPORT ZFINISHED_MAT.
Data: Begin of legacy_data occurs 0,
     MATNR LIKE MARA-MATNR,
     MBRSH LIKE MARA-MBRSH,            "Industry Sector
     MTART LIKE MARA-MTART,            "Matl Type
     WERKS LIKE MARD-WERKS,            "Plant
     LGORT LIKE MARD-LGORT,            "Storage location
     VKORG LIKE MVKE-VKORG,
     VTWEG LIKE MVKE-VTWEG,
     MAKTX LIKE MAKT-MAKTX,             "Matl Desc.
     MEINS LIKE MARA-MEINS,             "Base UOM
     MATKL LIKE MARA-MATKL,             "Matl.Grp
*     BISMT LIKE MARA-BISMT,
     SPART LIKE MARA-SPART,             "Division
*     BRGEW LIKE MARA-BRGEW,             "Gross weight
     GROES LIKE MARA-GROES,
     FERTH LIKE MARA-FERTH,
     ZEINR LIKE MARA-ZEINR,
     TAXKM1 LIKE MLAN-TAXM1,
     TAXKM2 LIKE MLAN-TAXM2,
     TAXKM3 LIKE MLAN-TAXM3,
     TAXKM4 LIKE MLAN-TAXM4,
     KTGRM LIKE MVKE-KTGRM,
*     GEWEI LIKE MARA-GEWEI,             "Weight unit
*     NTGEW LIKE MARA-NTGEW,             "Net weight
*     KLART LIKE RMCLF-KLART,
     MTVFP LIKE MARC-MTVFP,             "Availibility Check
*     XGCHP LIKE MARA-XGCHP,
     XCHPF LIKE MARA-XCHPF,             "Batch Management
     TRAGR LIKE MARA-TRAGR,
     LADGR TYPE MARC-LADGR,
     VPRSV LIKE MBEW-VPRSV,            "Price Control
     VERPR LIKE MBEW-VERPR,
*     SPRAS LIKE MAKT-SPRAS,
END OF LEGACY_DATA.
DATA: BEGIN OF IT_MAKT OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF IT_MAKT.
*--- BAPI structures
DATA: BAPI_HEAD LIKE BAPIMATHEAD, " Header Segment with Control Information
BAPI_MAKT LIKE BAPI_MAKT, " Material Description
BAPI_MARA1 LIKE BAPI_MARA, " Client Data
BAPI_MARAX LIKE BAPI_MARAX, " Checkbox Structure for BAPI_MARA
BAPI_MARD1 LIKE BAPI_MARD,
BAPI_MARDX1 LIKE BAPI_MARDX, " Checkbox Structure for BAPI_MARD
BAPI_MARC1 LIKE BAPI_MARC, " Plant View
BAPI_MARCX LIKE BAPI_MARCX, " Checkbox Structure for BAPI_MARC
BAPI_MVKE1 LIKE BAPI_MVKE,
BAPI_MVKEX1 LIKE BAPI_MVKEX, " Checkbox Structure for BAPI_MVKE
BAPI_MLAN1 LIKE BAPI_MLAN,
BAPI_MLANX1 LIKE bapi_mlan1, " Checkbox Structure for BAPI_MLAN
BAPI_MBEW1 LIKE BAPI_MBEW, " Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX, " Checkbox Structure for BAPI_MBEW
BAPI_RETURN LIKE BAPIRET2. " Return Parameter
*              $PARAMETERS DECLARATION$
SELECTION-SCREEN BEGIN OF BLOCK B11
                          WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE LIKE RLGRAP-FILENAME. " DEFAULT 'C:\TEST1.XLS'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN END OF BLOCK B11 .
*              $DATA DECLARATION$
*DATA : BDC_DATA LIKE STANDARD TABLE OF BDCDATA WITH HEADER LINE.
DATA : IT_EXCEL TYPE STANDARD TABLE OF ALSMEX_TABLINE INITIAL SIZE 0 WITH HEADER LINE,
        IT_EXCEL_DUMMY TYPE ALSMEX_TABLINE.
DATA : MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : L_MSTRING(480).
DATA :L_SUBRC LIKE SY-SUBRC.
DATA: V_FILE TYPE STRING.
*              $AT-SELECTON SCREEN DECLARATION$
AT SELECTION-SCREEN ON P_FILE.
IF P_FILE IS INITIAL.
    MESSAGE E398(00) WITH 'FILE NAME NEEDS TO BE SPECIFIED'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
*   DYNPRO_NUMBER       = SYST-DYNNR
     FIELD_NAME          = 'P_FILE'
   IMPORTING
     FILE_NAME           = P_FILE
start-of-selection.
perform data_fetch_to_xls.
perform insertion.
*&      Form data_fetch_to_xls
*       text
* --> p1        text
* <-- p2        text
FORM data_fetch_to_xls .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME                = P_FILE
      I_BEGIN_COL             = 1
      I_BEGIN_ROW             = 2
      I_END_COL               = 25
      I_END_ROW               = 2
    TABLES
      INTERN                  = IT_EXCEL
    EXCEPTIONS
      INCONSISTENT_PARAMETERS = 1
      UPLOAD_OLE              = 2
      OTHERS                  = 3.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    WRITE: /'ERROR UPLOADING XLS FILE FROM PRESENTATION SERVER !' ,
           /'RETURN CODE : ', SY-SUBRC.
ELSE.
*************NOW FILL DATA FROM EXCEL INTO FINAL LEGACY DATA ITAB----LEGACY_DATA***************
    IF NOT IT_EXCEL[] IS INITIAL.
      CLEAR LEGACY_DATA.
      REFRESH LEGACY_DATA[].
      LOOP AT IT_EXCEL.
        IT_EXCEL_DUMMY = IT_EXCEL.
        AT NEW COL.
          CASE IT_EXCEL_DUMMY-COL.
            WHEN 1.
              LEGACY_DATA-MATNR = IT_EXCEL_DUMMY-VALUE(18).
            WHEN 2.
              LEGACY_DATA-MBRSH = IT_EXCEL_DUMMY-VALUE(1).
            WHEN 3.
              LEGACY_DATA-MTART = IT_EXCEL_DUMMY-VALUE(4).
            WHEN 4.
              LEGACY_DATA-WERKS = IT_EXCEL_DUMMY-VALUE(4).
            WHEN 5.
              LEGACY_DATA-LGORT = IT_EXCEL_DUMMY-VALUE(4).
            WHEN 6.
              LEGACY_DATA-VKORG = IT_EXCEL_DUMMY-VALUE(4).
             WHEN 7.
              LEGACY_DATA-VTWEG = IT_EXCEL_DUMMY-VALUE(2).
            WHEN 8.
              LEGACY_DATA-MAKTX = IT_EXCEL_DUMMY-VALUE(40).
            WHEN 9.
              LEGACY_DATA-MEINS = IT_EXCEL_DUMMY-VALUE(3).
            WHEN 10.
              LEGACY_DATA-MATKL = IT_EXCEL_DUMMY-VALUE(9).
            WHEN 11.
              LEGACY_DATA-SPART = IT_EXCEL_DUMMY-VALUE(2).
            WHEN 12.
              LEGACY_DATA-GROES = IT_EXCEL_DUMMY-VALUE(32).
            WHEN 13.
              LEGACY_DATA-FERTH = IT_EXCEL_DUMMY-VALUE(18).
            WHEN 14.
              LEGACY_DATA-ZEINR = IT_EXCEL_DUMMY-VALUE(22).
             WHEN 15.
              LEGACY_DATA-TAXKM1 = IT_EXCEL_DUMMY-VALUE(1).
             WHEN 16.
              LEGACY_DATA-TAXKM2 = IT_EXCEL_DUMMY-VALUE(1).
             WHEN 17.
              LEGACY_DATA-TAXKM3 = IT_EXCEL_DUMMY-VALUE(1).
             WHEN 18.
              LEGACY_DATA-TAXKM4 = IT_EXCEL_DUMMY-VALUE(1).
             WHEN 19.
              LEGACY_DATA-KTGRM = IT_EXCEL_DUMMY-VALUE(2).
            WHEN 20.
              LEGACY_DATA-MTVFP = IT_EXCEL_DUMMY-VALUE(2).
             WHEN 21.
              LEGACY_DATA-XCHPF = IT_EXCEL_DUMMY-VALUE(1).
            WHEN 22.
              LEGACY_DATA-TRAGR = IT_EXCEL_DUMMY-VALUE(4).
            WHEN 23.
              LEGACY_DATA-LADGR = IT_EXCEL_DUMMY-VALUE(4).
            WHEN 24.
              LEGACY_DATA-VPRSV = IT_EXCEL_DUMMY-VALUE(1).
            WHEN 25.
              LEGACY_DATA-VERPR = IT_EXCEL_DUMMY-VALUE(14).
              APPEND LEGACY_DATA.
              CLEAR LEGACY_DATA.
          ENDCASE.
        ENDAT.
        AT END OF ROW.
        ENDAT.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDFORM.                    " data_fetch_to_xls
*&      Form insertion
*       text
* --> p1        text
* <-- p2        text
FORM insertion .
LOOP AT legacy_data.
* Header
BAPI_HEAD-MATERIAL = legacy_data-MATNR.
BAPI_HEAD-IND_SECTOR = legacy_data-MBRSH.
BAPI_HEAD-MATL_TYPE = legacy_data-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-SALES_VIEW = 'X'.
BAPI_HEAD-STORAGE_VIEW = 'X'.
*BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
* Material Description
REFRESH IT_MAKT.
*IT_MAKT-LANGU = legacy_data-SPRAS.
IT_MAKT-MATL_DESC = legacy_data-MAKTX.
APPEND IT_MAKT.
BAPI_MARD1-PLANT = legacy_data-WERKS.
BAPI_MARD1-STGE_LOC = legacy_data-LGORT.
BAPI_MARDX1-PLANT = legacy_data-WERKS.
BAPI_MARDX1-STGE_LOC = legacy_data-LGORT.
** Client Data - Basic
BAPI_MARA1-MATL_GROUP = legacy_data-MATKL.
*bapi_mara1-OLD_MAT_NO = legacy_data-bismt.
BAPI_MARA1-BASE_UOM = legacy_data-MEINS.
BAPI_MARA1-PROD_MEMO = LEGACY_DATA-FERTH.
BAPI_MARA1-SIZE_DIM = LEGACY_DATA-GROES.
BAPI_MARA1-DOCUMENT = LEGACY_DATA-ZEINR.
BAPI_MARA1-BATCH_MGMT = LEGACY_DATA-XCHPF.
*BAPI_MARA1-UNIT_OF_WT = legacy_data-GEWEI.
BAPI_MARA1-TRANS_GRP = legacy_data-TRAGR.
BAPI_MARA1-DIVISION = legacy_data-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
*BAPI_MARAX-OLD_MAT_NO = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-PROD_MEMO = 'X'.
BAPI_MARAX-SIZE_DIM = 'X'.
BAPI_MARAX-DOCUMENT = 'X'.
BAPI_MARAX-BATCH_MGMT = 'X'.
*BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-TRANS_GRP = 'X'.
BAPI_MARAX-DIVISION = 'X'.
*SALES
BAPI_MVKE1-SALES_ORG = legacy_data-VKORG.
BAPI_MVKE1-DISTR_CHAN = legacy_data-VTWEG.
*BAPI_MVKE1-DELYG_PLNT = legacy_data-DWERK.
BAPI_MVKE1-ACCT_ASSGT = legacy_data-KTGRM.
BAPI_MVKEX1-SALES_ORG = legacy_data-VKORG.
BAPI_MVKEX1-DISTR_CHAN = legacy_data-VTWEG.
*BAPI_MVKEX1-DELYG_PLNT = 'X'.
BAPI_MVKEX1-ACCT_ASSGT = 'X'.
** Plant - Purchasing
BAPI_MARC1-PLANT = legacy_data-WERKS.
BAPI_MARC1-LOADINGGRP = legacy_data-LADGR.
BAPI_MARC1-AVAILCHECK = legacy_data-MTVFP.
*BAPI_MARC1-MRP_GROUP = legacy_data-disgr.
BAPI_MARCX-PLANT = legacy_data-WERKS.
BAPI_MARCX-LOADINGGRP = 'X'.
BAPI_MARCX-AVAILCHECK = 'X'.
*BAPI_MARCX-MRP_GROUP = 'X'.
* Accounting
BAPI_MBEW1-VAL_AREA = legacy_data-WERKS.
BAPI_MBEW1-PRICE_CTRL = legacy_data-VPRSV.
BAPI_MBEW1-STD_PRICE = legacy_data-VERPR.
*BAPI_MBEW1-VAL_CLASS = legacy_data-BKLAS.
*BAPI_MBEW1-STD_PRICE = legacy_data-STPRS.
*BAPI_MBEW1-PRICE_UNIT = legacy_data-PEINH.
BAPI_MBEWX-VAL_AREA = legacy_data-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
*BAPI_MBEWX-VAL_CLASS = 'X'.
* TAX JURISDICTION CODE
BAPI_MLAN1-TAXCLASS_1 = LEGACY_DATA-TAXKM1.
BAPI_MLAN1-TAXCLASS_2 = LEGACY_DATA-TAXKM2.
BAPI_MLAN1-TAXCLASS_3 = LEGACY_DATA-TAXKM3.
BAPI_MLAN1-TAXCLASS_4 = LEGACY_DATA-TAXKM4.
BAPI_MLAN1-TAXCLASS_1 = 'X'.
BAPI_MLAN1-TAXCLASS_2 = 'X'.
BAPI_MLAN1-TAXCLASS_3 = 'X'.
BAPI_MLAN1-TAXCLASS_4 = 'X'.
*--- BAPI to create material
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
*PLANTDATA = BAPI_MARC1
*PLANTDATAX = BAPI_MARCX
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA = BAPI_MVKE1
* SALESDATAX = BAPI_MVKEX
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = IT_MAKT
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
* RETURNMESSAGES =
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error:' ,BAPI_RETURN-MESSAGE ,'for material:' ,legacy_data-maTNR.
ELSEIF BAPI_RETURN-TYPE = 'S'.
WRITE: 'Successfully created material' ,legacy_data-maTNR.
ENDIF.
ENDLOOP.
ENDFORM.                    " insertion
The error: The field MARC-MTVFP/BAPI_MARC-AVAILCHECK is defined as a required field; it does not contain an entr
suggestion will be vry helpful,
Kind Regards,
Edited by: Prasenjit Sengupta on Nov 16, 2009 9:11 AM

Hi Prasenjit,
Did you get any solution for this as I am getting same error from BAPI to update MRP controller in MARC table.
Regards,
Suruchi

After updating Firefox I am getting this message any time I do anything "Exc in ev handl:Error: Bad NPObject as private data"

This error happens each time I use Mozilla. especially when I click on an extension or try to work in any of my e-mail accounts (Yahoo, Gmail, or RCN). Sometimes I am able to continue by just clicking OK and other times it prevents me from completing my task. This started happening right after I downloaded and installed your latest version of Firefox. I see others are having the same problem. Error message is "Exc in ev handl:Error: Bad NPObject as private data"

That issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to handle errors in a file at sender side?

Hi
I have done a file to proxy scenario.
I know how to handle errors on proxy.
But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record..
I wanted to process the records which have right format and data and all remaining recrods which have wromg format should be send back to the sender as file.
How to do this.
How to handle error in sender file.
Regards
Sowmya

Hello Sowmya,
In your scenario Three ways you can validate the data.
1) Before the data reaches into SAP system ie in XI system during Mapping or before mapping i,e in Adapter Module in the Sender side
2) this option, is in the receiver applications side. ie. Validations will be taken care in the SAP system i.e in ABAP server proxy code.
3)Through BPM, If Mapping Exception Occures then through exception Branch you can send bad formate file to sender again.
Generally, it is prefer to more business critical validations in the Application System ie Receiver Application System (ABAP Server Proxy)
In this, you can have more flexibility of the validations as you are validating some of the SAP payroll informations as Personal ID etc.
Based on the complexity and flexibility of the requirement, you can either do this in the XI (if XI, ie Sender Adapter Module or Mapping) or in the ABAP proxy
Thanks'
Sunil Singh

Can't open PDF's on my Mac coming in on MS Outlook 2010. Reinstalled Adobe software 4 x and still get "Adobe PDF Preview Handler" error message.

Can't open PDF's on my Mac coming in on MS Outlook 2010. Reinstalled Adobe software 4 x and still get "Adobe PDF Preview Handler" error message.

No. Reader will not damage files. It is only meant to read pdf files. PDF files are frequently damaged when sent as email due to encoding issues.

Event handler error

I gets event handler error from the following applescript code if I leave the desktop space where "XLD" is running.
Is there a way to avoid this error and keep running the applescript?
tell application "System Events"
set wnd to front window of application process "XLD"
click button "Extract" of tool bar of wnd
delay 1
repeat while (name of front window of application process "XLD") = "Progress"
end repeat
end tell

Do you have any Mail plug-ins installed? Mail Act-on, MailTags or whatever? If so, try disable them and then see if the scripts work.
Alternatively, you can access the iPhoto Library from within Mail:
Uploaded with plasq's Skitch!
Just drag and drop to the message.
Regards
TD

Handle errors when makeing doc.submitForm()

Hello,
I am trying to submit PDF form by method doc.submitForm, example:
doc.submitForm
cURL: "http://localhost/reader_test.php?name=" + name.rawValue,
cSubmitAs: "XML"
A) With this approach, is it possible to handle connection errors and display custom error message (and cancel the original one) ?
I have tried something like
try{ doc.submitForm(...); } catch(e) { //handle code }
but it seems to be run asynchronously.
B) Is it possible to add custom HTTP headers to the POST ?
I saw that FormCalc can do it in Post() funciton, but when using Post() function, the Reader displays Yello-bar security dialog, that made our previous SOAP-based solution too complicated for the end user.
Appreciate any help.
Radek

Sofar I have not found the way how to handle errors when using doc.submitForms(), but there may be following workaround (mey be?):
The server returns as a response to a submitForms() call a pdf content, which is displayed as a document in a new Reader's window. Is it possible to place some javascript into this new window, that would refer to parent window and send to it some message ? Or at least to detect at the "parent" window, that a "child" window was opened ?
So is there any relation between the newly opened document with the response from server and the original document, that initiated calling of doc.submitForms()?
Thanks.

How to handle error or exceptions in jsf

Hi
i have a code using DTO and DAO.I want to handle errors in jsf automatically(ie without return parameter in java code .).Hoe i can handlethose errors in faces.config.

Declaratevly You can't do this.
I use two event handler for state remembering:
public static EventResult goToPage(BajaContext context,
Page page,
PageEvent pageEvent) {
Page newPage = new Page(page.getProperty("nextPageName"));
page.setProperty(NEXT_PAGE_NAME, null);
newPage.setPropertyAsPage("returnPage", page, context.getPageEncoder());
return new EventResult(newPage);
public EventResult returnToPage(BajaContext context,
Page page,
PageEvent pageEvent) {
Page oldPage = page.getPropertyAsPage("returnPage", context.getPageDecoder());
return new EventResult(oldPage);
StartPage.uix
<handlers>
<event name="nextPage">
<bc4j:chaining>
<bc4j:setPageProperty name="nextPageName" value="NextPage"/>
<method class="..." method="goToPage"/>
</bc4j:chaining>
</event>
</handlers>
NextPage.uix
<handlers>
<event name="nextPage">
<bc4j:chaining>
<method class="..." method="returnToPage"/>
</bc4j:chaining>
</event>
</handlers>
method setPropertyAsPage save all page properties and state informations for page.
On every page I use ctrl:page or ctrl:pageState DataObjectLists.
On pages with search criteria I use ctrl:httpSession DataObjectList to save all criteria in one session. You must write event handler when you make search or trigger FIND event. In this event handler you must put every search form parameter in session.
That's all from me! I hope this help You to resolve problems!

In call transaction how can we handle error records.

hai..tellme how can we handle error records in call transaction..we can get error records into one flatfile ok...then we have to execute the same bdc program with dat flat file (error records) once again...is it wright ..

Hi,
check this program u will get idea
seee this prog. its will help u .
copy and run this prog.
TYPES : BEGIN OF t_disp ,
vendorno(9),
compcc(13),
purchorg(14),
accgroup(15),
title(7),
name(5),
country(8),
ordcurr(14),
END OF t_disp.
TYPES : BEGIN OF t_err,
msgtyp LIKE bdcmsgcoll-msgtyp,
l_mstring(250),
END OF t_err.
DATA: i_disp TYPE STANDARD TABLE OF t_disp,
wa_disp TYPE t_disp,
i_err TYPE STANDARD TABLE OF t_err,
wa_err TYPE t_err.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: e_group_opened.
message texts
TABLES: t100.
PARAMETER : p_file1 LIKE ibipparms-path,
p_cmode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
*selction screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file1.
AT SELECTION-SCREEN ON p_file1.
IF p_file1 IS INITIAL.
MESSAGE 'FILE IS NOT FOUND' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM f_disp_file1.
END-OF-SELECTION.
PERFORM f_disp_errs.
*& Form F_DISP_FILE1
text
--> p1 text
<-- p2 text
FORM f_disp_file1 .
DATA: l_filename1 TYPE string.
MOVE p_file1 TO l_filename1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_filename1
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_disp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*? prepare BDC data
DELETE i_disp INDEX 1.
LOOP AT i_disp INTO wa_disp .
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_disp-vendorno.
'ztest_1'.
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_disp-compcc.
'0001'.
PERFORM bdc_field USING 'RF02K-EKORG'
wa_disp-purchorg.
'0001'.
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_disp-accgroup.
'0001'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_disp-title.
'Mr.'.
PERFORM bdc_field USING 'LFA1-NAME1'
wa_disp-name.
'test name'.
PERFORM bdc_field USING 'LFA1-SORTL'
'TEST NAME'.
PERFORM bdc_field USING 'LFA1-LAND1'
wa_disp-country.
'in'.
PERFORM bdc_field USING 'LFA1-SPRAS'
'en'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-AKONT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'LFM1-WAERS'
wa_disp-ordcurr.
'inr'.
PERFORM bdc_transaction USING 'XK01'.
WRITE:/ WA_DISP-VendorNo,
WA_DISP-COMPCC,
WA_DISP-PURCHORG,
WA_DISP-ACCGROUP,
WA_DISP-title,
WA_DISP-name,
WA_DISP-country,
WA_DISP-ORDCURR.
CLEAR: wa_disp.
REFRESH bdcdata.
ENDLOOP.
ENDFORM. " F_DISP_FILE1
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->P_0322 text
FORM bdc_transaction USING tcode.
DATA: l_mstring(480),
l_subrc LIKE sy-subrc.
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
MODE p_cmode
UPDATE 'L'
MESSAGES INTO messtab.
l_subrc = sy-subrc.
IF SMALLLOG 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT messtab.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
AND arbgb = messtab-msgid
AND msgnr = messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / messtab-msgtyp, l_mstring(250).
*? Send this errors to err internal table
wa_err-msgtyp = messtab-msgtyp.
wa_err-l_mstring = l_mstring.
APPEND wa_err TO i_err.
ELSE.
WRITE: / messtab.
ENDIF.
CLEAR: messtab, wa_err.
ENDLOOP.
SKIP.
ENDIF.
ENDFORM. " bdc_transaction
*& Form f_disp_errs
text
--> p1 text
<-- p2 text
FORM f_disp_errs .
SORT i_err BY msgtyp.
LOOP AT i_err INTO wa_err.
AT FIRST.
WRITE : / text-002.
ULINE.
ENDAT.
AT NEW msgtyp.
IF wa_err-msgtyp = 'S'.
WRITE : / text-003.
ULINE.
ELSEIF wa_err-msgtyp = 'E'.
WRITE : / text-001.
ULINE.
ENDIF.
ENDAT.
WRITE : / wa_err-msgtyp, wa_err-l_mstring.
CLEAR wa_err.
ENDLOOP.
ENDFORM. " f_disp_errs
Regards

Pdf Preview Handler Error outlook 2010 Server 2008

Pdf Preview Handler Error in outlook 2010 32.bit and Server 2008 64.bit. Using Adobe X. Registry app id correct. Turned on previewer in outlook in trust center. Repaired adobe installation. All to no avail. Any thoughts or fixes. Please Help

Hello i got nearly the same problem. Selecting the .pdf attachment in outlook. error code says that no preview can be showed, because the needed preview isn't installed.
Server 2012 R2 as Terminalserver, Outlook 2013, newest version of adobe reader XI.
I've already checked the following:
- outlook>options>trustcenter>trustcenter settings>attachment handling .. the box disable preview is clear .. furthermore outlook>options>trustcenter>trustcenter settings>attachment handling>attachment and documentpreview .. all
boxes including pdf preview handler are filled.
- adobe reader XI>edit>presettings?>e-mail-account ... outlook is standart.
- Registryentry: "Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
- also i repaired the adobe installation and i reinstalled it a few times.
- even checked the access-rights on the temp. directorys outlook uses for attachments and the users have full access.
i have no more clue what it can be..
so may you have the solution for me or at least some tips.
Thanks,
Nikolai

ORA-12519 TNS NO APPROPRIATE SERVICE HANDLER - ERROR

Hi,
We are using JDeveloper 11g for developing our web applications in our company and connecting oracle database through DB Connectivity option. We give the informations like username, password, hostname, sid, port number for getting the DB connectivity and developing web applications through ADF Faces in JDeveloper 11g, and around 25 people are getting connected to Database and developing their respective pages.
For first 30 minutes there is no DB problem, working quitely. After 30 minutes we are getting the error ORA-12519 TNS No appropriate service handler error, we tried to solve this problem by raising process number to 200 in init.ora file and killed the inactive sessions by getting session id from V$session table and restarted the DB Server. But still we are having this problem ORA-12519, after 30 minutes of starting the DB Server.
Can anyone suggest or help to overcome this problem ORA-12519.
Thanks
Saravanan N
Edited by: user11100608 on May 21, 2009 11:25 PM

See if metalink note 552765.1 helps you in this case.

Handling errors in BAPI

Similar Messages

Maybe you are looking for