Handling File in Configuration Folder

Hi,
I recently posted about a possibly corrupt file that I cant access anymore. I have what are technically "backups" but they are exports, not actual copy and paste files that I can change.
I found out through some research that I can access some weirdly named file titled TMP019238blahblahblah. I opened it, and all my stuff was there. I didnt want to mess with it since this seems to be my last chance at getting a lot of my work back.
How should I go about handling this? The samething pops up as in the original file "unable to load scene, your document might be damaged" but its saved anyway. I tried copy and pasting a few frames from the tmp file into a new document, but Adobe crashes when I open it.
How can I save the tmp file as a regular file and change/export all the new work I had that was lost in the original?
thanks,
Daniel

Never mind. I was plying around with it again and figured it out. I had to move the actual file from the desktop into the application folders via finder. And now it works perfectly.

Similar Messages

Delete save configuration files in /configuration folder

How to delete the historic stored (generated by our ssh script) configuration files in /configuration folder on Ironport appliance? thanks.
Leo

FTP to the box and delete them...
V:\>ftp esa
Connected to esa.opus.corp.root.
220 esa1.opus-group.com Cisco IronPort FTP server (V8.5.6) ready
User (esa.opus.corp.root:(none)): admin
331 Password required.
Password:
230 Login successful.
ftp> cd /configuration
250 CWD command successful
ftp> prompt off
Interactive mode Off .
ftp> mdelete *.xml <----you may want to change what you're deleteing.
200 Type set to ASCII.
250 DELE command successful.
250 DELE command successful.
250 DELE command successful.
ftp>

Reinstallation message: Could not locate Resources file in Configuration folder

I have new computer. Was running XP on old computer for CS4 Web Premium. Uninstalled from XP. Can't install on new machine with Windows 7. Getting error: Could not locate the Resouirces file in Configuration folder for Dreamweaver (and all other programs in Web Premium). Tried reinstalling times, no luck. Help please.
C Shaw

Do you receive this error message during the install process? I would recommend reviewing your installation log files. You can locate steps on how to accomplish this at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

Resource file in configuration folder

Hi, I've run into a slight problem with Dreamweaver the other day. I was moving the icon and it accidentally was dropped into the trash.
I took the icon out and have it in the Dock again, but I can't get the icon back into the Creative Suite folders for some reason.
Now everytime I try to load Dreamweaver--from the Dock or the icon that I have on the Desktop it gives me the same error.
"Could not locate the Resources file in the Configuration folder.
This file is required to run Dreamweaver. Please reinstall the application."
And now I'm puzzled and lost as to what to do to get Dreamweaver up and running again.
I'm running CS5 and on a Mac. 10.6.8 version.
Any help would be much appreciated.

Never mind. I was plying around with it again and figured it out. I had to move the actual file from the desktop into the application folders via finder. And now it works perfectly.

Need Help! "Could not locate the resource file in the Configuration folder."

I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
~Todd

Nadia,
Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
First I downloaded both Cleaning scripts. For CS4 & CS3.
Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result.

"Could not locate the Resources file in the Configuration folder"

While opening DW cs5 on my iMac OS X 10.7.5 a window came up that says: "Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application."
After downloading and reinstalling Adobe Creative Suite CS5 yesterday per the instruction of Adobe tech support, the application still had the same message when I attempt to open it. Not sure where else to turn. Please advise. Thanks

See if this previous thread regarding the same issue will help:
http://forums.adobe.com/message/2274699#2274699
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Css file in dreamweaver configuration folder?

while working with a dreamweaver page im getting messages asking me if I want to save a css file located in my dreamweaver configuration folder.
this is somewhat disconcerting as I have never saved anything to that folder.
Is this issue a problem and if so what can I do to resolve it?
Thank you.

I think you can safely ignore this message. I'm not sure why you are getting it, but it refers to a temporary file, perhaps created when you did a browser preview.

To relocate mail.log, mail.log_current file to specific folder

Hi
We have configured CommSuite 6 in single host. The output of imsimta version:
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
libimta.so 7.0-0.04 32bit (built 01:01:00, Jun 20 2008)
Using /opt/sun/comms/messaging/config/imta.cnf
SunOS mail 5.10 Generic_120012-14 i86pc i386 i86pc
Output of imta_tailor file:
IMTA_USER=mailsrv
IMTA_USER_USERNAME=nobody
IMTA_WORLD_GROUP=mail
IMTA_LOG=/logs/messaging/imta
IMTA_PRIMARY_LOG=/logs/messaging/imta/mail.log_current
IMTA_SECONDARY_LOG=/logs/messaging/imta/mail.log_yesterday
IMTA_TERTIARY_LOG=/logs/messaging/imta/mail.log
We need to relocate mail.log, mail.log_current, mail.log_yesterday file to specific folder.
After above setting we cannot be able to relocate above file.
Pl. help us.
Thanks
P.K.

world.group wrote:
We have configured CommSuite 6 in single host. The output of imsimta version:Please note that CommSuite 6 update 1 is now available and it is advisable that you upgrade using the "commpkg upgrade" command.
IMTA_LOG=/logs/messaging/imta
IMTA_PRIMARY_LOG=/logs/messaging/imta/mail.log_current
IMTA_SECONDARY_LOG=/logs/messaging/imta/mail.log_yesterday
IMTA_TERTIARY_LOG=/logs/messaging/imta/mail.logThese parameters are now ignored as per the Messaging Server 7.0 release notes:
http://wikis.sun.com/display/CommSuite6/Messaging+Server+7.0+Release+Notes#MessagingServer7.0ReleaseNotes-Ignoredimtatailorsettings
We need to relocate mail.log, mail.log_current, mail.log_yesterday file to specific folder. You can relocate the MTA log directory through the use of symlinks.
Regards,
Shane.

Importing All the files from a folder at a time

Hi....
Can any body tell me how to import set of files from a folder into IDM.
It is becoming very difficult to import the files one after other....
Waiting for Reply....
Thanks in advance..........

We used an ant script to build an XML file that will contain the files. The script is configured to use the folder structure of our CVS repository.
We'd checkout our XML module and then run the build script and import the resulting init file.
Code to the script is below -- caveat emptor. You'll need to change the folder structure to suit your own environment.
<?xml version="1.0" encoding="UTF-8"?>
<project basedir="." default="all" name="MyInit">
    <target name="init">
        <property location="." name="src.dir"/>
        <property location="." name="dest.dir"/>
        <property name="project.name" value="${ant.project.name}"/>
        <property location="${dest.dir}/MyInit.xml" name="MyInit.output"/>
        <property name="source.configuration" value="${dest.dir}/configuration"/>
        <property name="source.emailTemplate" value="${dest.dir}/emailTemplate"/>
        <property name="source.forms" value="${dest.dir}/forms"/>
        <property name="source.reports" value="${dest.dir}/reports"/>
        <property name="source.resource" value="${dest.dir}/resource"/>
        <property name="source.rules" value="${dest.dir}/rules"/>
        <property name="source.workflow" value="${dest.dir}/workflow"/>
        
        <path id="configuration.path">
            <fileset dir="${source.configuration}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="cp" refid="configuration.path" />
         <path id="emailTemplate.path">
            <fileset dir="${source.emailTemplate}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="ep" refid="emailTemplate.path" />
         <path id="forms.path">
            <fileset dir="${source.forms}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="fp" refid="forms.path" />
        <path id="reports.path">
            <fileset dir="${source.reports}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rptp" refid="reports.path" />
        <path id="resource.path">
            <fileset dir="${source.resource}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rep" refid="resource.path" />
        <path id="rules.path">
            <fileset dir="${source.rules}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rp" refid="rules.path" />
        <path id="workflow.path">
            <fileset dir="${source.workflow}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="wp" refid="workflow.path" />
        
         <path id="source.path">
            <pathelement location="${src.dir}" />
         </path>
         <property name="sp" refid="source.path" />
    </target>
    <target depends="init" name="win_init">
        
        <property name="importfile.path" value="${sp}"/>
    </target>
    <target depends="init" name="make">
    
        <echo file="${MyInit.output}" append="false"><?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Waveset>
${cp}
${ep}
${fp}
${rptp}
${rp}
${wp}
</Waveset>
        </echo>
     
     <replace file="${MyInit.output}"
              token = "${sp}"
              value = "<ImportCommand name='include' file='${importfile.path}" />
     
     <replace file="${MyInit.output}"
              token = "${file.separator}"
              value = "/" />
    <replace file="${MyInit.output}"
              token = "${path.separator}"
              value = "${line.separator}" />
    <replace file="${MyInit.output}"
              token = ".xml"
              value = ".xml'/>" />
    </target>
    <target depends="init,win_init,clean,make" description="Build everything." name="all"/>
    <target depends="init" description="Clean all build products." name="clean">
        <delete file="${MyInit.output}"/>
    </target>
</project>

How to move all files from a folder for a user to a centralized folder on a core server with a GP

Hello,
I was curious if someone know how to move all the files of a user "local" profile on a Terminal Server to that of a centralized server where the "local" profile of like the user desktop, favorites, setting, etc are stored in the event
the local profile on the TS become corrupt it can pull from this server...
The problem I have is no matter what I tell users to save there files to our Y drive that is a folder that is synced
across all 6 of our TS servers, users still store files on there desktops, so as you can imagine if one day they are on one server, then next day they could be on another and there files aren't the same.... hence the reason why I want to move all there files
to the centralized server so when I redo the profiles from scratch on the TS server in the farm they suck files from the core server and have all of the files they are used to having....
So I was curious and I've heard from some this is possible in a GP, but I'd like to move the contents of all 6 TS for
each user or if I have to d this on per user basis I will, just looking for a way to move the files....

Hi Trevor,
To move all users’ desktop to a server, we can use Folder Redirection to do this. The path for Folder Redirection is:
[Group Policy Object Name]\User Configuration\Policies\Windows Settings\Folder Redirection
In this situation, we can choose to redirect desktop to the root of a network file share or a folder on a network share.
Regarding how to configure this, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

Automator and applescript to copy new files in a folder with same name as parent folder

I have an iMac with a pictures folder (Finder folder) containing several subfolders with pictures. As per now, all these subfolders are imported into an iPhoto library (and the structure of the Finder pictures folder is thus maintained: The iPhoto events are named the same as the Finder subfolder). I.e. I have not created any albums in iPhoto.
I have also set up a workflow, where new iPhone photos are automatically being synced to specified Finder folders within the iMac pictures folder. So what I want to do is to make a workflow to import potential new photos from week to week into the existing iPhoto structure. I know iPhoto has this Autoimport folder, so this one is unpacked and "mapped". So, this is what I´m hoping to do:
Automator (iCal - want to do this on a weekly basis):
- Get specified Finder items -- set to target folder = iMac pictures folder
- Get folder content (with subfolders)
- Filter Finder items
     - Items from the last 7 days (which then would be any new files created last week)
- Applescript/shell script loop(?)
     - Get folder name for each file´s (from previous step) parent folder
     - Create new folder with same name as the file´s parent folder (if not already existing) under the iPhoto Autoimport folder
     - Copy the given file into the folder from above
- Run iPhoto application (Automator task), which then should just auto import the new photos according to the Finder folder structure
Whith the workflow above, I aim to maintain the existing iPhoto structure, and just import new photos into the existing structure. Creating folder names under the Autoimport, similar as the existing Finder folder names / iPhoto events should make it possible to have the new files imported under the existing event, right?

Anyone?
I have now switched to Aperture (from iPhoto) due to Aperture´s capability to handle Finder folder structure, and due to the possibility of having the pictures within Aperture as referenced files to the pictures within the Finder folders (i.e. possibility to delete pictures from both library and Finder folder at the same time).
So I have a superior Finder folder called "Album". Within "Album" I have several subfolders (sub albums) containing pictures. The "Album" folder with subfolders are imported into Aperture as "Projects and albums", and the pictures are uploaded within the Aperture structure as referenced files. So for now the Aperture structure is more or less a direct mirror of the Finder folder structure, whereas "Album" is the project.
And this is my current workflow in Automator, but I´m searching help with my Applescript:
- Get specified Finder items (target folder = the superior Finder folder "Album")
- Get Folder content
- Filter Finder items (to look for potential new files to import into Aperture)
     - Kind is not folder
     - Date created last X days
The output files from this task enters an Applescript
on run {input, parameters}
       repeat with f in input (**Loop**)
               tell application "Finder"
                      set fileName to name of (f)
                      set parentFolder to name of container of (f)
                      tell application "Aperture"
                             tell library 1
                                    tell project "Album"
                                           if (exists album parentFolder) then
                                             ** I then would like to check if fileName already exist within the existing album**
                                             ** If not existing, I would like to import file f into the existing album as a referenced file**
                                           else if not (exists album parentFolder) then
                                                   make new album with properties {name:parentFolder}
                                            ** I then would like to import file f into the new album as a referenced file**
                                           end if
                                    end tell
                             end tell
                      end tell
               end tell
       end repeat
end run

Create XML file in network folder

Hello All,
I am reading data from SQL tables and getting in the form of XML. I need to create a xml file with the same data and store the file in network folder.The name of the file should be with timestamp.xml.
Please suggest.
Regards.
Anshul

Hi Michael,
Thanks.
I am using XML SAVER action to create and save the file . It's working fine if in configure object file path is as "\\drive\folder\TEST.XML". In this case it's generating the file with name TEST.XML.
I configure link of same XML SAVER action and specified same "\\drive\folder\TEST.XML" for Path property. In this case it's giving me the error.
"Invalid link expression in action[XML_Saver_0]:\\drive\folder\TEST.XML"
I tried first with test file (Fixed name ) but it's not working. Once it will work i can use expression editor for date and time function.
I also need the expression to add date and time in place of TEST.
Regards.
Anshul

Maximum number of files in a folder ?

Hello, what is the maximum number of files in a folder OS X can handle ?
I used a file recovery software called FileSalvage to save some files of an external 300GB with a corrupted disk directory (unable to repair with the usual repair/recovery programs).
FileSalvage recovered about 435,000 files and sorted them by extension in individual folders, unfortunately it does not recognize the file names and just sequentially names the files per extension.
The .jpeg, .gif and .html folders had up to 75,000 files. After recovery the external FW drives started to behave very strange, unresponsive, just hanging, time-out. I tried on a Mac Mini, iMac G5, an iBook and PowerBook, OS X 10.3.9 and 10.4.3, FW400/800 and USB 2.0 interface, they all had pretty much the same failure mode after a while.
Running Disk Utility on the drives with the recovered FileSalvage folders showed a corrupted directory (invalid file count) and unable to repair, although I could copy most of the folders of the disk (deleted the folders with more than 10,000 files per folder).
I suspect that File Salvage copies more files in a folder than OS X allows, causing unpredicable problems.
Any ideas ?

From "Mac OS X: Mac OS Extended Format volume and file limits"
"Maximum number of files (or files and folders) in a folder … up to 2.1 billion"
According to a note in the document, the above is subject to the drive's size (maximum 16 terabytes in "Tiger") and block size, ie. the number of available blocks.
So it would appear that the number of files you mentioned would be well within theoretical limits, although I suppose there could be a bug in some other part of OS X. Otherwise, maybe there is a problem with the drive...

How to count files in a folder and subfolders of the folder.

Hello everyone,
I'm having a difficulty with countin files in a Regular folder and subfolders of the folder. I've tried to use SI_ANCESTOR in a query; however, it gives me innacurate results.
I used this hierarchy to create the code below, and it works to count all the files:
Folder A ---> Folder B( subFolder of A) -
> Folder C(subFolder of B)
//get folder A
IInfoObjects regFolders = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_KIND='Folder' AND SI_PARENTID=0 AND SI_NAME!='User Folders' Order by SI_NAME");
IFolder regFolder = (IFolder) regFolders.get(0);
//get files from Folder A
IInfoObjects rFiles = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID !   = 'CrystalEnterprise.Folder'   AND SI_PARENTID=" + regFolder.getID() );
ilesCount += rFiles.size();
int subCntr=0;
nt subCntr2=0;
//get folder B
IInfoObjects rSubFolders = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.Folder' AND SI_PARENTID=" + regFolder.getID() );
//get files from subFolders of Folder A
while (subCntr < rSubFolders.size())
          IInfoObject subFolder=(IInfoObject)rSubFolders.get(subCntr);
          IInfoObjects subFiles = infoStore.query ("SELECT * FROM CI_INFOOBJECTS "
      + " WHERE SI_PROGID != 'CrystalEnterprise.Folder'" AND SI_PARENTID=" + subFolder.getID() );
         filesCount += subFiles.size();
         //get subFolders of Folder B
         IInfoObjects rSubFolders2 = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.Folder' AND SI_PARENTID=" + subFolder.getID() );
                     //get files from subFolders of Folder B
     while (subCntr2 < rSubFolders2.size())
          IInfoObject subFolder2=(IInfoObject)rSubFolders2.get(subCntr2);
          IInfoObjects subFiles2 = infoStore.query ("SELECT * FROM CI_INFOOBJECTS "
               + " WHERE SI_PROGID != 'CrystalEnterprise.Folder' AND SI_PARENTID=" + subFolder2.getID() );
                                           filesCount += subFiles2.size();
           subCntr2++;
          subCntr++;
As you can see, the code is too complicated, and what if folder C has subFolder?
I'm guessin maybe recursion would be one way to got, but I'm not really good with it, so I was wondering if anyone has any idea on how to go about doing it.
Thank you,

Hi,
For detailed information, please refer to the BI 4.0 developers guide here.
You can find the section "Setting up the development environment" in developers guide that have every single instruction to execute a java code specific to BI 4.0 environment.
Also, here are the instructions for BO 3.1 environment:
To configure a WAR file for a J2EE application that uses the BusinessObjects Enterprise XI 3.0 and 3.1 Java SDK, complete these steps:
Create a lib folder in the WAR file's WEB-INF folder.
Copy the Enterprise XI 3.0 or 3.1 Java SDK JAR files from the appropriate location below to the WAR file's WEB-INF\lib folder:
Windows:
...\Program Files\Business Objects\common\4.0\java\lib
UNIX:
<businessobjects_root>/java/lib
Copy the log4j.jar file from the appropriate location below to the WAR file's WEB-INF\lib folder:
Windows:
...\Program Files\Business Objects\common\4.0\java\lib\external
UNIX:
<businessobjects_root>/java/lib/external
Copy the entire crystalreportviewers12 folder from the appropriate location below to the WAR file's root folder.
Windows:
...\Program Files\Business Objects\common\4.0
UNIX:
<businessobjects_root>/enterprise12/JavaSDK
Open the web.xml file located in the WAR file's WEB-INF folder.
Specify the location of the utility files used by the report viewers contained in the crystalreportviewers12 folder by inserting the following code below the <display-name> and <description> tags but within the <webapp> tag definition:
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/BOXIR3/crystalreportviewers12</param-value>
</context-param>
<servlet>
<servlet-name>CrystalReportViewerServlet</servlet-name>
<servlet-class>com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>CrystalReportViewerServlet</servlet-name>
<url-pattern>/CrystalReportViewerHandler</url-pattern>
</servlet-mapping>
Deploy the WAR file to the J2EE application server.
You are now able to run an application using the BusinessObjects Enterprise XI 3.0 and 3.1 Java SDK on a J2EE web application server.
Hope it helps.
Regards,
Anchal

The Date Accessed attribute is resetting to all the files in a folder

Hi all,
I have an issue that the "Date Accessed" attribute is often resetting to all the files in a folder if i open single file as this folder is from File server mapped as Drive to me. This is happening to all the users whoever connect to that fileserver
and i see same issue from RDP as well. is there any option to check which is resetting the "Date Accessed" attribute to all the files. The Date Access attribute is simillar to Date accessed and Date modified. We need to fix this issue as it is related
to security concern for us. The file server is windows 2008 R2 and the client machines are windows 7.
Side note: I can see that there is no software, antivirus, offline sycn is causing this issue.
Thank you,
Sampath
P.Sampath

Hi,
It seems that some specific process accessed the files and updated the attribute. You could configure auditing on the shared folder. Then you can go through the auditing log to check which process is doing the read operation on all these files.
Configuring Audit Policies
http://technet.microsoft.com/en-us/library/dd277403.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Handling File in Configuration Folder

Similar Messages

Maybe you are looking for