Handling Unit and Picking List Output

Hello SAP Gurus,
I am not able to generate the output for Handling Unit and Picking List. Can you please help me in configuring the same.Can you please do let me know the steps to be completed for the output.
Thanks & Regards,
Sunil

Hi Sunil,
1. TCODE NACZ -> Create a procedure.
2. For this procedure you can define control sequence (Step, Control, Condition Type).
3. TCODE NACE -> Choose Application V6 (Handling Units).
4. Click on Output types.
5. You can create your own output type here.
6. For this output type you can give the access sequesnce.
7. For the same output type, in Processing Routines, give the Medium (Printer, EDI, etc.), Print Program Name, From Entry, Form name (SapScript Name). If it is a smartforms then specify the name in SmartFrom coulmn.
First 2 steps are depende on the requirement. You can go with standard settings.
Thanks,
Mandar

Similar Messages

  • Configuaration for handling Units and Packaging List

    Dear All,
    Kindly suggest me the configuration for the Handling units and packaging List.
    Regards

    Hi,
      Refer this  http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOHU/LOHU.pdf
    Regards
    GK.

  • Nested Handling Units and Confirmation of Transfer Order - Pick HU

    Friends & Gurus,
    I have nested (low level) handling units and when confirming  I would like one of the nested HU to become the pick-HU. So far I haven't been able. The pick-HU is always generated with a new number and if I try to assign manually one of the nested HU the systems says that the HU is not assigned to the TO.
    Any comments or ideas will be appreciated.

    I fully agree and thanks for coming back.
    I can unpack the nested HU and then create a TO and select the unpacked HU (now a SU) as a full HU removal. I believe this is not operative, the idea is the operator gets to the big box, chooses (scans) one of the small box (nested) and confirms the TO. If somebody back at the office has first to unpack one of the nested HU (how could he know which one if there are 30 of them? Which one is on the top?) it makes it unviable.
    Are we on sync?

  • Clarifications in pick list output type EK00

    Hello ,
    Have any one of you used the pick list output EK00 . I have
    tried this and I do have some issues with
    We are using SAP R/3 4.7 x 200 version .
    Output type EK00 is not available in the application V2 (
    Shipping ) . Its available in application V4 (Shipping special
    case).
    1. I have assigned the shipping points through T code VOK2 as I
    am not able to find the output EK00 through customization menu.
    2. I have maintained the printers details through VP01SHP ( correct me if I am wrong) . I am using the standard program RVADEK01 and form
    SD_PICK_SINGLE in the output EK00.
    After doing the above setting when I am creating delivery in
    VL01N , the output type EK00 is not assigned automatically and
    when I try to assign it manually , it gives an error message
    "Processing program missing for output EK00 (medium 1)in
    application V2" . I dont know why the system is looking for
    application V2 when it is not available in V2 and only available
    in V4 .
    Am I missing anything in my process . Can some one help me in this .
    With regards,
    Joseph Anand.B

    Dear Joseph,
    Have you done the following setting in transaction v/38:
    1.On the Display View "Output Types": Overview screen, in the Output type group box, select EK00. (Application V4)
    2.In the left frame, under Dialog Structure, double-click on the Processing routines folder.
    3.On the Change View "Processing Routines": Overview screen, choose  .
    4.In the first medium, for Print output, enter the Smart Form print program /SMB40/RVADEK01 under Program and Smart Form /SMB40/SDPIK_L under SmartForm.
    Document Types        Picking List
    Output Types          EK00
    Transaction Code      v/38
    Smart Form Program    /SMB40/RVADEK01
    Smart Form            /SMB40/SDPIK_L
                          /SMB40/SDPIK_A
    5. Save the changes.
    Regards,
    Naveen.

  • Two pick list output types

    Hi,
    I have a requirement related to pick list output types. A pick list output type is already configured and assigned to shipping point and is used for taking pick list for SD customer delivery.
    I want to create another pick list output type which is to be assigned to same shipping point for subcon delivery alone.
    How can I configure it?
    Your inputs please.
    Regards,
    Siva

    No feedback

  • Handling Units and BADI_HU_AUTOPACK

    We are setting up handling units(HU's) to be created at the time of Transfer Order(TO) creation.  We have implemented the badi BADI_HU_AUTOPACK.  What I am looking for is the way to link the handling unit number with the line items on the TO so that when the user goes to confirm the transfer order the HU's and the line items are aligned as desired.  In the CT_ITEMS parameter I can see the handling units and the TO item data, but the hadling unit number has not yet been created.  I would appreciate any input on this issue.

    Those fields are filled.  The HU is field EXIDV below, and the $0000000001 is like a placeholder, since the HU number has not yet been generated.  My assumption was that this number to be created would be linked with the TO Item 000001.  This is not the case when viewing the TO.
    VENUM     C     10
    EXIDV     C     20      $0000000001
    VELIN     C     1      1
    BELNR     C     10      1001003116
    POSNR     N     6      000001
    SUB_HU_VENUM     C     10
    SUB_HU_EXIDV     C     20

  • Picking List output

    Hello Experts,
    I have configured the picking List output type to print the picking list at the time of delivery creation. However, when i change the delivery quanitity or picking quantity, it is printing the output document. How can i avoid this situation, i want it to be printed only at creation not on changes to the delivery document. Please advise
    Thanks

    Hi!
    I think you need to ensure that "Multiple issuing" check box in v/34 is switched off for the corresponding output type.
    Regards,
    Raghukul Tilak Mokirala

  • Change Pick List Output Format with automated Output format  froTO creation

    hi.,
    When creating TO for delivery using VL06P or LT03 there is no opportunity to print the Company Custom  Format(X1) of the pick list.
    But if it is reprinted in LT31, Print Code X1(Company defined picking list Output format) can be selected. This is our custom formatted TO output format.
    The delivery address is on the document, so if X1 format is used with the automated output from TO creation, Warehouse personel will have the Hardcopy of the delivery address.
    Question: How can i have the Print Code X1 to default when i am creating delivery using VL06P or LT03.
    All help is much appreciated.
    Tx

    Resolved by Myself

  • Picking list output in VL70 for the outbound deliveries picked via WM

    Hi Experts ,
              How to take Picking list output in VL70 for the outbound deliveries picked through transfer Orde(WM).
    Generally, we ll genreate picking list in VL70 directly giving from the outbound delivery. Then , system wll confirm the Picked quantities along with the Print out in deliveries as per the configuration done in OVLT..
              In this case , how to take the Picking list in VL70 ? Pls give your advice on this..
    With Regards
    S.Siva

    hi,
    this is to inform you that,
    use - LX21 for this purpose.
    hope this clears your issue
    balajia

  • Picking List output for WM

    Hello,
    Can you tell if there is a standard Pickling list output type for a Sales Order Outbound delivery for a WM activated plant.(EK00 is no longer in application V2)
    How can a Transfer Order creation trigger this Picking List (output type?)
    Please let me know
    Thanks
    SAP FAN.....

    Hi,
    You can do this in the transaction OMLV -> 'Print Code',  Form name depends on the print code.  Few are here with.
    Single print / TO item          LVSTAEINZEL
    Multiple print / TO          LVSTALISTE
    Single print for ref.no.          LVSTAEINZEL
    Multiple print ref.no.          LVSTALISTE
    Picking list version 1          LVSKOMMIL1
    Picking list version 2          LVSKOMMIL2
    Posting change notice          LVSUMBUCHEN
    Single printout w. kanban          LVSTOSOLOKANBAN
    Single printout w.kanban          LVSSAMMELKANBAN
    Best Regards,

  • Printing Order acknowledgement and pick list

    SAP 2007 A
    Please follow scenario:
    Create sales order with 3 line items. If we print order acknowledgement only display is correct. If we print either the pick list only or the order and pick list combination we sometimes see the three items repeated on the pick list and sales order prints fine. This only occasionally happens and we cannot see any pattern as to why it happens. Anyone ever experience this and/or have a suggestions as to what may be causing the problem

    What is your PL?  It sounds like a bug to me.
    Thanks,
    Gordon

  • Create handling units and assigning them as Packing Proposal for Sales Orde

    Hi Friends
    How to create handling units and assigning them as Packing Proposal for Sales Order Items in the background.
    Could you please help to provide Input Parameters for BAPI_HU_CREATE for sales order OR is there any other program creating and assigning them to Sales Order line Items.
    Thanks in Advance.
    SR

    Hi Friends
    I created Handling Units with BAPI_HU_CREATE , Pack materials with BAPI_HU_PACK in to Handling Untis and assign handling units to sales order with BAPI_HU_CHANGE_HEADER . But These BAPIs are not doing packing sales order line items in to handling units . I have to go sales order and do sales order line item packing by clicking packing button.
    Could you please help on how to do packing Sales Order Line items in the background with BAPIs.
    Thanks in Advance.
    SR

  • Sales Order and Pick List reports will not attach to Email message

    My client wants to email both the Sales Order and Pick List that is created from the Sales Order in the same email message.  It appears that SAP B1 will not do this.  Is this a bug or just the way B1 works.  My client is running version 8.8 PL 19.   Thank you for your help.
    Bill Turek

    Hi Bill,
    Pick List is associated with delivery, not sales order. If you need Pick List be emailed, you have to email delivery.
    Thanks,
    Gordon

  • What is the difference between handling unit and packaging material

    hi
    what is the difference between handling unit and packaging material

    Hi,
    A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
    Packaging materials are intended to enclose or hold together the materials that are to be packed. In other words, the material that is to be packed can be packed into or onto the packaging material. The packaging material can be a load carrier. The most important packaging materials include crates, boxes, containers, wire baskets, and pallets.
    Regards,
    Naveen

  • Picking List Output in ECC 6.0

    Hello SAP Gurus,
    Can anybody tell me how to get the output for Picking List in ECC 6.0.Please do let me know the steps to be followed in configuration for the same for output generation.
    Thanks & Regards,
    Sunil

    Hi,
    The Pick List is printed from the Pick and Pack Manager.
    goto Inventory > Pick and Pack > Pick List and then Open the Pick List and Print from there.
    If this is what you are doing then if your FMS are set to Auto Refresh then as soon as your Pull the Pick list the FMS should fire and the mode should change to UPDATE.
    Alternatively,
    you can do this by customizing a report with your needed fields with ABAP person.
    regards,
    Siddharth.

Maybe you are looking for