Handling unit deletion in delivery

Hi
Can any one help us on how to unpack and delete HU from Outbound delivery? When we go through VL02N and do the unpacking and delete the HU and try to save that, system is giving the error message:
Within the delivery, posting change not possible for stocks
Message no. HUDIALOG107
Diagnosis
During current processing, materials have been packed or unpacked that refer to a HU-managed storage location. During delivery processing, it is not possible to make a transfer posting of stock between HU-managed and non-HU-managed storage locations.
System response
It is not possible to go back to delivery. The data cannot be saved.
Procedure
Pack the quantity that has before been unpacked or unpack this quantity again.
Greatful for any indication of the approach to do this.
Thanks
Sriram

hello sriram
there is a deletion icon on the right hand side of the screen when we do the packing itslef, so go to vl02n, go to packing screen, there u can see the deletion icon, (a dustbin like) now select the HUs to be deleted, then click the delete icon, it will be deleted. now save the order again.
hope this helps u.
suresh

Similar Messages

BAPI or Function Module to create Handling Unit at the delivery level

Please send me the BAPI / FM details to create Handling Unit at the delivery level.
Thanks

Hi
you can try below BAPI's.
BAPI_HU_CREATE
BAPI_HU_PACK
Hope this helps you.
Rgds,
Kris.

How to delete handling units for a delivery

While deleting delivery note there are hundreds of handling units.
please help me how to delete handling units
Thanks for the help
Rajendra Prasad

Hi
u can delete Handling Units in change view delivery document.. Click Packing it will show Handling Units..By there itself u can delete..
IN VL02N

How to unassign handling unit in outbound delivery?

(Don't Want to delete HU onlu unassign it from delivery: WM requirement)
I would like to unassign HU in an outbound delivery.
code i'm using make the handling unit disappear in the overview of HU.
but corresponding line in the "item overview" are still existing.
And when I want to copy pack quantities as delivery quantities, system tell me that "50.000 M have already been packed. Quantity cannot be changed. "
How can I do, to do as if i pushed button "delete assignment" in HU overview?
Here the code I'm using:
CALL FUNCTION 'HU_PACKING_REFRESH'.
CALL FUNCTION 'HU_GET_HUS'
EXPORTING
if_lock_hus = 'X'
it_venum = I_VENUM "it_venum contains l_venum
IMPORTING
ET_ITEM_SERIALNO = o_item_serialno .
CALL FUNCTION 'V51P_DELETE_RELATIONSHIP'
EXPORTING
IF_CONTROL = 'X'
IT_HUS = i_venum
IMPORTING
ET_NEW_HUS = LT_HUS
et_messages = lt_messages
EXCEPTIONS
FATAL_ERROR = 01 .
CALL FUNCTION 'HU_POST' .
call function 'BAPI_TRANSACTION_COMMIT'.
Please let me know the function module if anybody has idea to unassign from delivery.
Edited by: Akshay Kale on May 4, 2010 7:04 AM

Hi Akshay,
This question is marked as Answered , can you please let me know how you have resolved this error .
My Requirement is to remove HU assignment from inbound Delivery . If possible can u provide me the code snapshot to remove assignment for inbound delivery.

Handling Units Deletion from Shipment

Hi,
I got a problem in deletion of handling units using the FMs V51P_FILL_GT and then HU_PACKING_AND_UNPACKING. The FM HU_PACKING_AND_UNPACKING has got a structure gt_xvekp which gets populated dynamically when a HU is deleted from a shipment, but this is not happening when i call the FM separately in a program. Can any one help me or provide me a sample code in resolving this. Correct answers would be rewarded.
Thanks
Abhishek

Hi,
LT06 is to create TO with reference to material document.
I'm not sure what you want exactly. You marked creation of TR in customizing - in this case you have to create TO from LB10 from the automatically generated TR or you can create TO automatically with suitable reports (you have to run programs in background).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/91cfd2571211d4b3210050045571f7/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
If you want to have immediate TO (you want to create the TO at immediately after GR si posted), you have to set it in customizing in WM-IM interface. Please read OSS note 566090 for details.
Please also search on the net / forum.
Regards,
Csaba

Packing handling units to outbound delivery with batch management

Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
Isaac

Dear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely

Same Handling Unit in Return delivery

we have a scenario which we are implementing for SAP's client DHL.
The scenario is as follows:
1. We have done the GI for the handling units.
2. And we want to take the same handling units back.
In order to do so, what we do
1. We create a return order with original sales order
2. This eventually creates a return delivery but does not get the handling units assigned.
3. Hence the delivery needs to be packed with the same HU's with which the goods have been issued.
Anyone has faced the issue earlier or any one aware of any Bapi or functional modules which will allow them to pack with the same HU.
Thanks in advance
Ajay.

It's seems that you faced it a few years ago, could you please post what you did?
Thanks

Handling unit in inbound delivery

Dear all
creation of handling uinit for inbound delivry are optional in standard as we can create H.U or without H.U for inbound delivery
please guide me how can i customize sysytem as creation of handling uinit for inbound will be mandatory in other words we can't create inbound delivery without handling unit number.
best regards
R.T

no comment

Assigning batch and handling unit tio an delivery

Hello friends,
Is there any FM/BAPI to update handling unit and batches to the delivery line item. for tcode VL02n
Thanks

unfortunaltey to archive boms you have to archive alle predecessing documents before you can start this one.
go to transaction SARA for object MM_SPSTOCK and click the button for 'Network Graphic'. it will tell you very colourfull what you have to do before attempting to archive boms.
same goes for handling units, object LE_HU. Check in SARA.

Pack existing Handling Units into outbound delivery

Hi,
The current scenario is that a WHSCON IDoc is passed into SAP which will pack handling units onto an inbound delivery. As part of this processing the IDoc will create the HU records on VEKP.
Now, we are sending in a similar WHSCON IDoc to pack the same HU onto an outbound delivery. However, the IDoc is failing. It appears that the IDoc wants to create the HU instead of simply using the existing one.
Has anybody faced a similar issue.
Thanks
Martin

Hallo!
Yes, I have the same problem now.
In the past we had 2 wm sub systems which send data via WHSCON to SAP and pack the delivery items.
To avoid error messages we "kill" the old vekp-record by setting the vekp-status to "0099" with a hart update and create new hu records.
Nowadays this solution is not sufficient, because the old hu has serial numbers.
Any solution in sight?
bye
bernhard

Handling Unit Details for Delivery needed (Table VEKP in R/3)

Hello all,
do you know if there is any standard extractor for handling unit details of an R/3 delivery?
I searched the Business Content and the available Extractors in R/3 but cannot find any.
If there is none, what would be the best way to get some content of Table VEKP e.g. VEKP-VHILM? Define an own structure and create a view? Can I also do this with the delta functionality?
Many thanks for your answers upfront.
Peggy

indeed my question "short description" is wrong, as one material can have only one base unit.
If the base unit of one material in my system is CRT (crate) and the description is "box with 30 table napkins packs", I need to know where store the description of the single "table napkins pack" or "pallete with 20 boxes of 30 table napkins packs" available under "Units of measure" of that material.
The full hierarchy (pack-Box_pallete) of the material units are available in one SAP material, but there is only one place for one description.
Thanks

Processing handling units for outbound delivery

Dear All,
I am getting the message "The material contained in the item you chose is maintained in the material master with the material group packaging material K. The handling unit you chose has a packaging material of the packaging material type V
There is no entry for the material-group packaging-material for this material type in Customizing.
Can you please advice what should be done to fix this where to make the customizing.
Warm Regards

Hi,
Change the material group in the mateiral master. OR in SPRO configure for Define material group for packaging material and Define Allowed Packaging Materials for the material group that you have defined in the material master.
Thanks and Regards,
Maheshwari

Function Module for UNPACKING Handling Unit from Inbound Delivery

Hello Experts,
I am working on a RFID program to Receive goods from vendor...
One of the steps of the program should CHANGE the quantity inside a received batch.
To do so, I need to UNPACK the Handling Unit first... then change the quantity.
I am using the following Function Modules to do so:
- 'HU_GET_HUS'
- 'V51P_FILL_GT'
- 'HU_PACKING_AND_UNPACKING'
- 'HU_POST'
First 2 FM works fine...
But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
Have anyone done this before??
Here's the code I've done to do some testing before putting it into my code...
PLEEEEEEEEEEEASE HELP.
TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
DATA: wa_object LIKE hum_object,
      it_object TYPE TABLE OF hum_object.
DATA: wa_v51vp LIKE v51vp,
      it_v51vp TYPE TABLE OF v51vp.
DATA: flag LIKE v51p_select_flags.
DATA: it_venum            TYPE STANDARD TABLE OF hum_venum,
      ef_rcode            LIKE sy-subrc,
      et_vekp             TYPE STANDARD TABLE OF vsep_s_vekp,
      et_vepo             TYPE STANDARD TABLE OF vsep_s_vepo,
      et_vevw             TYPE vsep_t_vevw,
      et_highest_level    TYPE vsep_t_venum,
      et_messages         TYPE huitem_messages_t,
      is_packing_request TYPE vsep_s_pithu,
      es_p_request        TYPE vsep_s_pithu,
      es_item             LIKE vepovb,
      cs_header           LIKE vekpvb,
      ef_number           TYPE vpobjkey,
      et_header           TYPE STANDARD TABLE OF vekpvb,
      et_items            TYPE STANDARD TABLE OF vepovb,
      et_item_serialno    TYPE vsep_t_rserob,
      et_history          TYPE hum_history_t,
      et_highest_levels   TYPE hum_venum_t.
DATA: wa_venum            LIKE hum_venum,
      wa_vepo             TYPE vsep_s_vepo,
      wa_vekp             TYPE vsep_s_vekp,
      wa_items            TYPE vepovb,
      wa_header           TYPE vekpvb.
START-OF-SELECTION.
wa_venum-venum = p_venum.
APPEND wa_venum TO it_venum.
CALL FUNCTION 'HU_GET_HUS'
    EXPORTING
      it_venum          = it_venum
    IMPORTING
      et_header         = et_header
      et_items          = et_items
      et_item_serialno = et_item_serialno
      et_history        = et_history
      et_highest_levels = et_highest_levels
      et_messages       = et_messages
    EXCEPTIONS
      hus_locked        = 1
      no_hu_found       = 2
      fatal_error       = 3
      OTHERS            = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_header INDEX 1 INTO wa_header.
CALL FUNCTION 'V51P_FILL_GT'
    EXPORTING
      it_venum         = it_venum
    IMPORTING
      ef_rcode         = ef_rcode
      et_vekp          = et_vekp
      et_vepo          = et_vepo
      et_vevw          = et_vevw
      et_highest_level = et_highest_level
      et_messages      = et_messages
    EXCEPTIONS
      hu_locked        = 1
      no_hu_found      = 2
      fatal_error      = 3
      OTHERS           = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_vepo INDEX 1 INTO wa_vepo.
READ TABLE et_vekp INDEX 1 INTO wa_vekp.
MOVE-CORRESPONDING wa_vepo TO is_packing_request.
is_packing_request-belnr    = wa_vepo-vbeln.
is_packing_request-quantity = wa_vepo-vemng.
is_packing_request-veanz    = '-1'.
is_packing_request-meins    = wa_vepo-vemeh.
is_packing_request-exidv    = wa_vekp-exidv.
CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
    EXPORTING
      is_packing_request = is_packing_request
    IMPORTING
      ef_rcode           = ef_rcode
      es_p_request       = es_p_request
      es_item            = es_item
    CHANGING
      cs_header          = cs_header
    EXCEPTIONS
      missing_data       = 1
      hu_not_changeable = 2
      not_possible       = 3
      customizing        = 4
      weight             = 5
      volume             = 6
      serial_nr          = 7
      fatal_error        = 8
      OTHERS             = 9.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HU_POST'
    EXPORTING
      if_synchron = 'X'
      if_commit   = 'X'
    IMPORTING
      ef_number   = ef_number.
break nunfx004.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance,
Fernanda

Hi ,
Check this code.
Pack componet HU to Overpack HU. *
    l_packing_req-venum = g_ovrp_venum.                  "Overpack Internal HU
    l_packing_req-exidv = g_ovrp_exidv.                  "Overpack External HU
    l_packing_req-veanz = '1'.                     "PACK Constant
    l_packing_req-sub_hu_venum = l_int_venum.
    l_packing_req-sub_hu_exidv = l_int_exidv.       "Componet External HU
    l_packing_req-velin = '3'.                      "HU Type Constant
    l_packing_req-quantity = '1.000'.
call function 'HU_PACKING_AND_UNPACKING'
      exporting
        is_packing_request = l_packing_req
      exceptions
        missing_data       = 1
        hu_not_changeable = 2
        not_possible       = 3
        customizing        = 4
        weight             = 5
        volume             = 6
        serial_nr          = 7
        fatal_error        = 8
        others             = 9.
    if sy-subrc <> 0.
error
      clear: v_msgv1, v_msgv2, v_msgv3.
      v_msgv1 = text-031.
   PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
      leave to screen sy-dynnr.
    endif.
No Errors --> POST HU
    call function 'HU_POST'
      exporting
        if_synchron = 'X'
        if_commit   = 'X'.
plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
Regards
Mohinder Singh Chauhan

Handling unit management - pack delivery items in mass

Dear All,
I'd like to ask for your help whether there's any mass transaction in standard system that is designed to pack several deliveries at once (like mass WM picking in VL06P).
- Automatic packing and generation of packaging items is set but first we do WM picking (batch is determined at this time), so packing of delivery items and generation of delivery items of packaging materials comes only after this
- we do not want to use shipping and do packing trough shipment
Does anyone know whether it is possible (if yes how)?
Thanks,
Csaba

Hi Group! I have the same requirement? Do you know if it is possible to pack several outbound deliveries in one packaging unit (container) without using shipment?
thanks in advance!!

Assigning Handling Unit to Inbound delivery

Hi Guys,
My requirement is i need develop program which will t program which will take the mutliple Purchase orders/STOs and create a single inbound delivery. Acutally this will be done SAP transaction VL31N. But as it has sap enjoy transaction we can run write a bdc for this transaction. So I found one transaction VL34, which is taking the multiple POS, but..creating multiple deliveris i.e. a inbound delivery for each PO. So I copied this code in Z program and did the modifications to create a single inbound w.r.t. given purchase order numbers. But I found packing details are not getting updated.
So, now i need to assign the packing details (HU numbers) to created inbound delivery .
Any idea on this ?
Best Regards,
Ganesh Nama

Any body knows...solution for above question ?

Handling unit deletion in delivery

Similar Messages

Maybe you are looking for