Handling unit Status

Hi Friends,
i am getting problem while creating delivery for material with handling unit in Packing.
Please help me
Error Message:
Handling unit 299999990000000151 has status 0010 -             No Assignment to outbound delivery
with regards

Hi,
Thank you very much...
i have another doubt.....
i am unable to understand determination of packing instructions.
where it is linking i am confused.
we are assigning the determination procedure in the T.code
OVHU2.(Maintain Packing Transaction Profile in IMG).
my doubt is where we are assigning this Transaction Profile in Handling Units.
Please help me....
with regards

Similar Messages

  • Failed to update handling units status

    Hi,
    I'm joseph. I'm trying to load my shipment in LM30. I have 8HU's in one outbound shipment. I successfully loaded the 5HU's but on the last 3HU's i encountered problem "Failed to update handling units status" <note that they are nested HU's>.
    Do you know how to fix this problem?
    Thanks in advance!
    Edited by: jmanzanero on Jul 26, 2011 8:00 PM

    Hello ,
    Please consider the following points when doing the load process.
    If loading is by HU, the HU must be still in the warehouse but post good issue deletes the HU from the warehouse. With Transaction LM30 , you can load the HU only before the goods issue. Also , all of the RF transactions provided in the SAP standard product are to be used for the warehouse operations. Here , the HU must exist in the warehouse to be able to use the LM30 for loading.
    I hope this information has been helpful.
    Best Regards,
    Frank

  • "Current assignment" field missing in Handling Unit status tab

    Our scenario is as below:
    1. STO created and outbound deliveries generated
    2. Deliveries are assigned to shipment
    3. Packing is done using RF transaction
    In the normal scenario, the HU status tab would show the outbound delivery number in the current assignment tab. But for some Handling Units, the current assignment field shows blank. Also, the contents tab shows only the delivery line item number and not the delivery number. We have also noticed that the problem delivery line items have been packed in 2 different Handling Units, each containing the full delivery line item quantity. (not sure how this is possible). One of the HU is displayed correctly but the other one has the missing delivery number issue.
    Has anyone encountered such a scenario? How is the system allowing to pack the same delivery item quantity in 2 different Handling Units? Any suggestions in this regard would be very helpful.

    Hi,
    Thank you very much...
    i have another doubt.....
    i am unable to understand determination of packing instructions.
    where it is linking i am confused.
    we are assigning the determination procedure in the T.code
    OVHU2.(Maintain Packing Transaction Profile in IMG).
    my doubt is where we are assigning this Transaction Profile in Handling Units.
    Please help me....
    with regards

  • URGENT DELIVERY HANDLING UNIT STATUS ERROR

    Hi Experts when i am doing PGI i am getting the following error and system is not allowing to do PGI
    ERROR: When trying to read the status of an object (HU  210868), a system error occurred: For object number HU0000210868 there is no status object.

    Hi Ramesh,
    The material is having the Packing ( Handling Units).
    In delivery please do the Packing for the Materials because they have linked with the Handling Units. and Also check the wheather the Handling Units are configured properly.
    For your Information please go through the Below which will help you further.
    The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually. 
    This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
    Table of Contents
    Objective 
    IMG Menu – The Starting Point 
    Handling Unit Management Overview 
    Start of HUM Outbound Deliveries Manual Packing Configuration 
    Define Number Ranges for Handling Units 
    Define Packaging Material Types 
    Define Material Group for Packaging Materials 
    Define Allowed Packaging Materials 
    Use Handling Unit Supplements 
    Maintain Goods Movements for Handling Unit Stock-Posting 
    Define User Status Profile 
    Set QM Check and Delivery Type for Each Movement Type 
    HU Requirement for Storage Locations and Default Values for Deliveries 
    Packing Control By Item Category 
    Define Requirements for Packing in the Delivery 
    Delivery Type Determination 
    Set Unique Number Assignment for HU Identification 
    Number Range Maintenance for HU Identification 
    Define Number Assignment for Each Packaging Material Type 
    Delivery Output type for Packing List 
    Maintain the Delivery Output Determination Procedure 
    What else to maintain after the Manual Handling Units Configurations? 
    Start of the Automatic Packaging Configuration 
    Define Number Ranges for Packing Instructions 
    Define Determination Type for Packing Instructions 
    Define Number Ranges for Packing Instruction Determination Records 
    What else to maintain after the necessary Automatic Packaging Configurations? 
    Appendix A: How to do Manual Packing for Non-Assigned Handlings Units? 
    Appendix B: Scenario 1 – How to do Manual Packing by Delivery Item? 
    Appendix C: Scenario 2 – How to Manual Pack the Materials into Pallets? 
    Appendix D: How to do Automatic Packing? 
    Appendix E: How to do Goods Movement for Handling Unit Material? 
    Appendix F: How to Unpack the Handling Unit Material? 
    A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
    Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
    Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
    Figure 1: Handling unit example
    Structure
    The handling unit object contains the following attributes:
    •     Identification number
    •     Dimensions
    •     Weight
    •     Volume
    •     Status
    •     Materials and quantities
    •     Packaging materials
    •     Packing instructions
    A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
    Handling unit header
    The header data of a handling unit is divided in the following way:
    •     Weight/Volume/Dimensions
    •     General data
    •     Means-of-transport data
    •     Additional data
    •     Output determination procedure
    For more information about each of these detailed points, see Editing detailed data for handling units.
    Status
    The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
    You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
    If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
    Handling unit item
    The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
    To access the item data of an individual handling unit, select the handling unit concerned and choose Goto &#61614; Detailed HU data &#61614; Contents.
    Integration
    Handling units can be used in all processes within the supply chain.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Handling Unit Status (0031) - Physical Inventory

    Hello Friends,
      We need to know when the system change HU status to 0031 in table VEKP (HU Header) .  We assumed that, it will be during physical inventory posting for HU's and for testing the following transactions are executed -
    1. HUINV01 -
    2. HUINV03
    3. HUINV04
    4. HUINV05
    However after physical inventory doc posted and material document generated for difference, system still showing the HU Status as 0020.
    In this regard, please suggest whether we are doing the correct way or what is the method to adjust the HU's and when the system update the status 0031 in HU table.
    Appreciate your supprt.
    Thanks
    Best Regards,
    Goutham

    Hello Friends,
      Very greatful for your support.
    Best Regards,
    Goutham

  • Handling unit status at table level

    Dear Experts,
    I want to know the logic to find only those HUs which exist in the inventory i.e. which are present physically. I do not want those which have been delivered/deleted/scrapped etc. How can I get this at table level and what filters should I use?
    Regards,
    Sachin

    Hello,
    the only way (as I know) is to use transaction HUMO and set filter for field HU-managed storage loc.='X' in ALV
    Andrzej

  • To Update the status of a handling unit in VEKP table

    HI,
    My smartform(picking slip ) is triggering from vl02n transaction,my requirment is
    to change the status of handling unit to 60 (Delete) ,after my form printed,
    I checked with FM hu_update_status but it is not changing the VEKP-status field for that particular hanling unit .

    Hi,
    What's the link between Printing the Smartform and Updating the HU status?
    Generally Smartform is used to print the Output of Packing Slip,?
    You mean after packing is over you have to Modify the handling Unit status?
    then you have to find the status of packing and based on that field you have to modify the JU status.
    Regards,
    Anji

  • Duplicate Handling Unit Number

    Hi All,
    I am stuck with this error where I can see same handling unit no. in two different deliveries. I am not able to figure out why is the handling unit repeating. I checked it in the VEPO table where I see same handling unit no but in different year. So i am guessing it is repeated with fiscal or calendar year. Can any body please help.
    I am maintaining number range using SNRO --> HU_VEKP

    This could be repeted handling unit number.Check the HU number range is the HU number used before ?.I think you can compare the handling unit number with current number series.
    Befor conclude number range before assigned to new delivery  is the handling unit is un assigned status 12 (This you can see HU03 transaction ).If yes then there is no problem assigning of handling unit to new delivery.What is the satus of old delivery is it completly receipted or it is customer delivery ?.If it is inbound delivery and completly receipted and the handling unit status before 12 then there is no problem.

  • How to Change Handling Unit User Status

    Hi All,
    I am trying to change the HU Status using FM 'STATUS_CHANGE_EXTERN' but its not working.
                 lx_huheader-hu_id  is the Internal Handling unit number.
                CONCATENATE 'HU'
                            lx_huheader-hu_id INTO
                            lv_objnr.           
                CALL FUNCTION 'STATUS_CHANGE_EXTERN'
                  EXPORTING
                    client              = sy-mandt
                    objnr               = lv_objnr
                    user_status         = 'E0002'
                  EXCEPTIONS
                    object_not_found    = 1
                    status_inconsistent = 2
                    status_not_allowed  = 3
                    OTHERS              = 4.
    Please guide me.
    Thanks
    Srinath

    HI...
    add this Export parameter in the call of function module,
               SET_CHGKZ                 = 'X'
    after chef id the objnr is correct.........remember to call the commit work, or BAPI_TRANSACTION_COMMIT after the status change.
    Marco

  • Structure AENDB has status X -Handling Unit Can No Longer Be Changed

    Hi,
    During TO confirmation using LT12 we are facing an issue with TO confirmation.
    we get the error
    ERROR-MsgNo :HUDIALO Handling unit / item has the status "cannot be changed"
    We identified that the AENDB value is set to X for the HU. Kindly can you let me know when this value is checked in the HU.
    Also where in the HU can we trace this
    Thank you

    Hi,
    Check the OSS note
    1925247 - Cannot confirm next TO item into the same pick-HU
    Thanks,

  • Handling unit system status

    Hello Everyone,
    I am looking for system status of handling units.
    In HUMO transaction, under tab-strip <b>Status</b>, we have <b>HU-specific data</b>. In this block, we have <b>System status</b> field, where the status of handling units are maintained.
    I am trying to retrieve the value of this system status field from database table, but it takes me to structure VEKP_TXT under which there is one filed SYS_STATUS.
    Could not find in which table the system status are stored by SAP.
    The possible values of this status field are:
    PHEX
    UNLD
    Anybody having idea where the value of system status field gets stored in database table.
    Thanks in advance.
    Regards,
    Tarun

    Hi TG  ,
    values comes from Domain , So try to get values from domain itself.
    <b>DDUT_DOMVALUES_GET</b>and name is <b>HU_SYSSTATUS</b>--->System status.
    Regards
    Prabhu

  • Create and Pack Handling Units in the Sales Order Using HU_CREATE_ONE_HU

    Hello Experts,
    I am trying to use HU_CREATE_ONE_HU function module to create a handling unit and pack it with specific line items in the sales order program in the background.  I am able to create the handling unit and pack it but it does not get associated to the sales order / line item.  If you look at the sale order's packing proposal, it does not show it packed.  If I look at VEKP / VEPO, I see where it was created but there is no value for vbeln or the posnr I proposed.  Below is the code, I am using.  Does anyone know what I am doing wrong or is there another function module I can use?
    LOOP AT t_vbap.
        CLEAR:   is_header_proposal, it_items, es_header, et_items, et_messages, t_vbap2.
        REFRESH: et_items, et_messages, t_vbap2.
        is_header_proposal-exidv          = '$1'.
        is_header_proposal-exida          = 'A'.
        is_header_proposal-vhilm          = 'UNIBOX'.
        is_header_proposal-hu_status_init = 'A'.     "planned
        is_header_proposal-status         = '0001'.  "planned
        "get the components that make up this subassembly including the parent.
        SELECT * FROM vbap
          INTO TABLE t_vbap2
         WHERE vbeln = t_vbap-vbeln
           AND posnr = t_vbap-posnr. "parent
        SELECT * FROM vbap
          APPENDING TABLE t_vbap2
         WHERE vbeln = t_vbap-vbeln
           AND uepos = t_vbap-posnr.  "children
        "now load the items to be packaged in the proposal
        LOOP AT t_vbap2.
          CLEAR: it_item.
          it_item-velin    = '1'. "material item
          it_item-belnr    = t_vbap2-vbeln.
          it_item-posnr    = t_vbap2-posnr.
          it_item-quantity = t_vbap2-kwmeng.
          it_item-meins    = t_vbap2-meins.
          it_item-matnr    = t_vbap2-matnr.
          it_item-werks    = t_vbap2-werks.
          it_item-lgort    = t_vbap2-lgort.
          APPEND it_item TO it_items.
        ENDLOOP.
        CALL FUNCTION 'HU_INITIALIZE_PACKING'.
        CALL FUNCTION 'HU_CREATE_ONE_HU'
          EXPORTING
            if_create_hu       = 'X'
            is_header_proposal = is_header_proposal
            it_items           = it_items
          IMPORTING
            es_header          = es_header
            et_items           = et_items
            et_messages        = et_messages
          EXCEPTIONS
            input_missing      = 1    " Data that is Necessary for Creation is Missing
            not_possible       = 2    " HU Creation not Possible
            header_error       = 3    " HU Header Data Contains Incorrect Data
            item_error         = 4    " Items Cannot be Created
            serial_nr_error    = 5    " Serial Number Error
            fatal_error        = 6    " Internal Error
            OTHERS             = 7.
        CALL FUNCTION 'HU_POST'
          EXPORTING
            if_synchron = space
            if_commit   = 'X'.
      ENDLOOP.
    Thanks for the help.
    Laura

    The abap statement does not make sense.
    xlips_high_posnr = ( lips-posnr / tvlk-incpo ) * tvlk-incpo
    posnr & incpo are both type numc length 6.
    Here is my recommendation to catch the divide by zero error.
      data: l_oref    type REF to cx_root.
      data: l_text    type string.
      TRY.
            clear l_text.
             xlips_high_posnr  = lips-posnr / tvlk-incpo.
            CATCH cx_sy_zerodivide INTO v_oref.
              l_text = l_oref->get_text( ).
            CLEANUP.
    *      Put your code to do further processing if it is divide by zero
      ENDTRY.

  • Re-using Handling unit. Inbound deliver has unpacked materials

    Dear All
    We're running the process that inbound delivery is created automatically once goods issue for outbound delivery is done.
    We're also running the process when handling units created in outbound delivery are re-used in Inbound delivery.
    The problem we've got is that from time to time we have situation when part of materials in inbound Delivery are unpacked, while these materials were packed in handling units. There are no errors appear, and Inbound Delivery is created, but materials are unpacked.
    In humo for such handling units, which are not created in Inbound Delivery i can see that the status was not updated and still remains "LOAD PHEX WHSE" and such HUs are assigned to plant where goods issue was done.
    Whille for handling units which were created in Inbound Delivery the status is updated to "PHEX" and HUs are assigned to recieving plant.
    Please advise if you have any idea on the root cause and solution.
    Thanks in advance.
    Best Regards
    Andrey

    HI Andrey,
    Wanted to know if you have recd the solution for this old thread. We arefacing a similar kind of problem wherein we get the status as 0020 when we pack for Returns Delivery. This status is like the Goods are already posted and hence we cant do PGR.
    Please suggest.
    rgds..Ameet

  • External Handling Unit (Barcode) Information is Missing

    Hello Folks,
    I got a requirement where a warehouse will send us an EDI 945 file to confirm the shipment completion. But, it send us the file without SSCC labels for those shipped items of the order. This 945 is being translated into a SHPCON IDOC(DELVRY03) which doesn't contain the E1EDL37(Handling unit header). This IDOC is failing in status 51 with the error message: External Handling Unit (Barcode) Information is Missing.
    What should be done to get this IDOC posted sucessfully even if it doesn't contain the SSCC label? Is there any setting that should be changed for this customer to not to look for SSCC labels(External Handling unit).
    Thanks for your help,
    Siva

    This could be because of custom code. Check the exits in inbound FM and you should find out the root cause. Standard SAP doesn't check for customer level SSCC checks. If it gets the HU's from 3PL, it'll pack it such way. If it doesn't, it'll pack is the usual way.

  • ALV Report for Handling Units

    Hi,
    In SAP, the standard report exists for the selection of handling units (HUMO). The requirement is that in addition to standard output the report should also display  for KMAT materials the serial number associated with the respective HU, catalog number and special stock category.
    -Depending upon the selection criterion, the HU assigned with the material will be identified for the materials.
    -The HU contains the catalog number in the contents field of status tab and will be displayed in output.
    -The serial number assigned with the HU will be picked up from the HU and will be displyed in the output.
    1. The program will first find out the HUs for the material. From the HU, catalog number and serial number will be traced.
    2.The output should be in ALV format.
    3.The output will display HU number, KMAT number, catalog number, serial number, quantity, special stock indicator, plant, Storage location, Warehouse number, and bin-location.
    Can Any body tell me what are the table involved in this ALV report to display HU number, KMAT number, Special Stock Indicator, Warehoure Number and Bin Location.
    Thanks,
    Bala.

    Hi ,
          For Handling unit tables are VEKP,VEPO also use object LE_HU in transaction SARA .
    For Warehouse number check out table t300,t320 or view v_T320
    For Bin location table T303,T303T or view V_T303
    For special stock determination T434P
    FOR KMAT - table MAST ,STKO ,STPO.
    Please reward if useful.

Maybe you are looking for