Handling Unit: unable to pack the delivery

Dear Experts,
In a HU managed storage location, there is sales order stock for material A.
I want to post the sales order stock from sales order 1 item 10 to sales order 2 item 10, using movement type 413 E.
Then I got an outbound delivery (delivery type HTP, item category HSTP). I think I am supposed to pack this material before I could PGI.
But in the delivery (edit->pack) packing screen, I found I could NOT select/highlight the material A under field 'Material to be pack' at 'Pack material' tab. So I could not pack this material into the handling unit to finish to packing step.
Please kindly help ! Thank you !
Jack

Hi,
Please try using LQ02 for your posting, if its not posting directly then you can opt to move from Sales order stock to normal stock and then again moving it to the other sales order stock. I know for sure that using LQ02 you can post from sales order to normal stock but since I don't have my current system setup to test this so I cant confirm if It can be used to do transfer directly as well.
Regards
Chandra Shekhar

Similar Messages

One handling unit wrongly updated to the delivery out put

Hi gurus,
Internal handling unit number is showing delivery document number in table *vekp* but real handling unit contains no delivery document number and shipping point. Could any one guide me how to find out the delivery document of this handling unit.
advance appreciations to all

use t code HUMO , give the hU nad execute , display u will get the delivery doc numbet rt side end top
rew

Handling unit preventing deletion of inbound delivery

Hello,
Our Decentralized WMS had a glitch in the system that left several
idocs queued to create inbound deliveries. These deliveries have
associated handling units which were placed from the outbound delivery
to the inbound. Before the inbound deliveries could be created via XI,
users created manual inbound deliveries against the POs and PGRed.
When the Decent WMS glitch was addressed, the IDOCs submitted were
processed, creating inbounds with handling units that were completely
packed.
So our system contains 2 inbounds for a po. We would like to delete the one with with the handling unit, but it's not that simple.
To address this issue, it is necessary to remove the handling units,
but this isn't possible. We receive an error message, unable to change.
I've attempted to PGR the delivery but this isn't possble either.
the following error message is received.
MSSA-SATRA exceeded by 2 EA : 10004063 AA26 0001 E
How can these Handling units be deleted to allow the associated inbound
deliveries to be deleted as well?
Is there a program to modify the status of the handling unit? I do not
want to perform any table editing or goods movements unless there are
no other alternatives

applying note 1083602 which should resolve

Handling Unit problem in Packing for STO

Hello All,
The problem is related to Packing process in case of Stock Transfer Order (STO).After making delivery while doing the packing procedure, in " Handling Unit " supplements 'Handling Unit Group 1' field is not getting populated / assigned automatically (under additional data tab) though all the master data against 'Handling Unit Group 1' for example 00001 to 00500 are already maintained.Apart from this the combination of finished good & packing material in the packaging instruction in POP2 are also maintained.
Point to be noted is in another scenario the handling unit is getting automatically populated in the packing process after delivery where also the above mentioned areas are not maintained, but still it is working properly which is not clear why & how is this taking place.
The procedure followed in the second scenario which is working are as follows -
In outbound delivery change mode (T Code - VL02N) go to Pack -> Click on Pack Proposal -> Expand packing instruction -> select 602 -> Create HUs -> Message shown is Handling Units were created -> click on Pack material & select the 'Handling Unit' line -> then select 'Detailed view general' -> then go to Additional Data where in Handling Unit Group 1, value is automatically populated / assigned for example 00027.
In my process the value for example 00001 is not getting automatically populated/ assigned.How to do this ?
Looking forward to some valuable suggestions at the earliest.
Thanks & Regards
Priyanka Mitra

I see you hae reposted the question, please request for a solution from SAP they might proide you an OSS note.

Changing Handling unit weight does not update delivery header weight

Dears,
when we pack an item on a palett, system calculates tara-weight + material weight = gross weight and inserts this value to the likp-btgew. this is correct.
now it happens, that shipping departement uses a scale to get the 'real' weight of the handling unit. if the weigth differs, they change the loading weight of the HU. system calculates correct the new gross weight of the HU.
But when going back to delivery view, the likp-btgew is not updated. Do we miss a setting?
thanks a lot for your help!
Michael

wrong forum

Weight from Handling Unit not copied into outbound delivery weight field.

Hi,
We create handling units with hupast and with a weight interface. If we select the HU in the outbound delivery, we need the total weight of all HU displayed in the outbound delivery. This is not happening. The total weight which is shown is the weight of the material master.
How can we put HU weight in the outbound delivery?
Thank you,
Eric van Zundert.

hi Eric,
you habe to do this with a user exit.
In the deliveries, there is only one good userexit at the time save dcoument prepare. -- there is a oss - note for it.
I copy at every save the sum of the HU-weights in the fields of likp.
Additionally at time of goods out - boocking, i collect the LIKP-weight upon all positions of the lips, so that the sum of lips-weights will give the likp-weight.
You need to do this, because in invoice, the weight is taken as sum of the positions and the following processes of export will also take the weight of the invoice-position.
hans

Can we print handling unit label before assigning to delivery

I created handling unit and assigned the output type in the handling unit, I tried to create label through VL74 but not succeded. Kindly let us know whether we can print the label without assigning to delivery document.Kindly let me know if any other options are there.
THanks

Hi Prakash,
Thanks for your reply. I am bit confused with your statement. I create handling unit number and assigned output type in HU02, now i am trying to print labels from VL74 tcode, but failed. No results in VL74 output.
It seems VL74 can be used for HU prints only after assigning to Delivery number.
Regards,
Lakshmikanth

How do fix this--FastCGI Error The FastCGI Handler was unable to process the request. Error Details: The FastCGI process has failed frequently recently. Try the request again in a while Error Number: -2147467259 (0x80004005).

That's it! But at the bottom of the web page it says - ----------------
-----javascriptvoid(0);

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Picking handling unit in Delivery

Hi,
I have a scenario in which I want to pick handling units from stock into the delivery. At the time of picking in delivery transfer order is created, but warehouse management is not in the scope. Can we pick handling unit in delivery without warehouse management.?
Regards
Falgun

Dear Falgun,
I think its not possible. if i understood your question correctly, that you have created an order and for that you are doing picking/packing, you should create handling unit first and then allocate it in the material master for that perticular material in material master MM01 ->basic data tab under packing material data.
hope its helpful for you.
Regards
Ashwini

Assigning batch and handling unit tio an delivery

Hello friends,
Is there any FM/BAPI to update handling unit and batches to the delivery line item. for tcode VL02n
Thanks

unfortunaltey to archive boms you have to archive alle predecessing documents before you can start this one.
go to transaction SARA for object MM_SPSTOCK and click the button for 'Network Graphic'. it will tell you very colourfull what you have to do before attempting to archive boms.
same goes for handling units, object LE_HU. Check in SARA.

Handling Unit Number against each PO Number/Sales Order

Dear All,
I have a query regarding identification of Handling Unit/s Number/s (Handling Unit Management) against each PO Number in Sales Order. E.g. I created 2 Sales Order with 5 and 7 line items respectively. Now I combine them into one Delivery which becomes as 12 Line items. Now against each PO Number/Sales Order line items I have done multilevel packing, similarly I have done this for 2nd PO Number/Sales Order line items while creating Outbound Delivery.
As per my client's requirement, he wants to print the Handling Unit Number as per Sales Order PO Number. I have checked VEKP and VEPO where I am not able to segregate the Handling Unit Number against each Sales Order/PO Number. Please find below Screen Shot.
Please help me out.
Regards:
Abhishek

Hello,
I'm not sure to understand completely your requirement.
Anyway in VBFA you should have the complete flow of the documents:
enter in VBFA with
"Follow-on doc." (VBELN) = your HU number
"Subs.doc.categ." (VBTYP_N) = 'X - Handling unit
"Prec.doc.categ." (VBTYP_V) = 'J - Delivery"
In this way for each Handling Unit you'll get the delivery number and item, and from that you can branch to the corresponding Sales Order item number and get the customer's PO number.
On top of that, in table VEPO you have the reference to Delivery number and item. The only thing you need is one more step using VBFA again, to get from the delivery and item numer, the corresponding Sales Order number and item.
Best regards,
Andrea

Handling unit 1000001227 contains an item that cannot be assigned

THE HANDLING UNITS ARE CREATED WITH THE BATCH MANAGED MATERIAL HU02.
AT THE TIME OF CREATING DELIVERY,WHEN I GO TO SELECT THE HANDLING UNITS IN EDIT>PACK THE SYSTEM GIVES ME FOLLOWING WARNING,
Items subject to batch handling w/o batch assignment could not be packed
AND AFTER ENTERING THE SYSTEM TAKES ME TO THAT PACKING SCREEN AND WHEN I SELECT MY HANDLING UNIT THE SYSTEM GIVES ME THE FOLLOWING MESSAGE AND DOESN'T SELECT THE HANDLING UNIT,
Handling unit 1000001227 contains an item that cannot be assigned
ALTHOUGH THE SYSTEM SELECT THE HANDLING ONLY WHEN I MENTION THE ALL BATCHES,QUANTITY AND WAREHOUSE OF THE ITEM IN BATCH SPLIT.
ANY ANYONE TELL ME THAT HOW CAN I SELECT THE HANDLING UNITS WITH OUT MENTIONING ITS BATCHES IN THE BATCH SPLIT.
REGARDS:VIJAY KUMAR

Hi Vijay,
Based on the below error Items subject to batch handling w/o batch assignment could not be packed.
I think while creating the delivery check whether the system allocated the correct batch or not. If not created the batch then click on Batch split and Batch determination.
Then from the menu Batch determination -> W/o classification. Then system will show the all batches. Then select the coorect batch and copy the Qty.
Then try to do packing edit - > pack.
I think it will work fine.
Regards,
SK

Handling Units Configuration Steps

Can anybody please send me the step by step configuration steps for Handling Unit.
Thanks in Advace for your help.
SUNIL

The following process chain provides an example of how Handling Unit Management can be set up for integrated implementation in the relevant SAP components
Process Flow
Sales and Distribution
·        You receive a sales order for certain materials. If you have a special agreement with the customer as to the packaging in which this material is to be delivered, you can reflect this agreement by using existing (or creating) packing instructions and a corresponding packing-instruction determination record. You can use this agreement at any point during packing. If the agreement is limited to this particular order, the information is created in the order in the form of a packing proposal. This agreement is then also available during packing in repetitive manufacturing and in the delivery.
·        An availability check is run for the order items. If the system determines that the sales order cannot be filled by using the warehouse stock currently available, a requirement is created for production (in the case of in-house production) or for purchasing (in the case of external procurement).
Production
·        A manufacturing order (such as a work order) is created for the respective material on the basis of the order requirement.
·        The raw material required for production is reserved (if it is in stock).
Purchasing
·        If the raw material is not available in sufficient quantities, or if the material required for the sales order needs to be acquired externally, purchase orders are created from the requirements generated for material procurement.
Goods receipt
·        The vendor notifies the goods recipient of the delivery of the goods by using a shipping notification that also contains the packaging data. The shipping notification generates an inbound delivery that includes the packing information from the shipping notification. If there is no EDI notification, the inbound delivery must be created and packed manually for the purchase order. The handling units are put away and the inbound delivery is posted for goods receipt.
Quality Management
·        If the packing data is known in the inbound/outbound delivery, an inspection lot is created for these handling units and the stock is posted to quality inspection stock upon goods receipt/goods issue.
·        If the handling units have been put away in HU-managed storage locations, the handling units can be re-transferred since the stock is still managed through the handling unit.
Warehouse Management
·        Handling units with raw materials are provided in time for production in accordance with the production requirement.
Quality inspection
·        As soon as the quality inspection is complete, the stock in the handling units is posted to unrestricted-use stock or to scrap materials, depending on the usage decision.
Inventory Management
·        If the production storage location is not HU-managed, the goods issue of the raw material takes place through an explicit stock posting or through the verification from production.
·        If the production storage location is HU-managed, the goods issue takes place either after successful staging of the materials or through explicit specification of the handling unit.
Production
·        The production process is executed and the raw materials are used.
·        The handling units that result from this step are planned.
·        As a last step, the material that was produced is packed, either in production or after production. The handling units that are created in this way are confirmed as implemented. If there was no planning, the handling units are created directly as implemented handling units.
Quality Management
·        If the status of the handling unit changes from planned to implemented (or changes during creation of implemented handling units from production), an inspection lot is created for the handling units.
Inventory Management
·        The handling units are posted for goods receipt after verification from production (or in a separate step). Quality Management decides whether the handling unit is to be posted to unrestricted-use stock, inspection stock, or quality-inspection blocked stock.
Shipping
·        An outbound delivery is created from the sales order
Warehouse Management
·        Transfer orders are created for the materials to be delivered and the handling units are picked from stock. If only partial quantities of existing handling units are required, handling units are created for the picked materials.
·        The picked handling units are confirmed to the delivery.
Shipping
·        The handling units that were picked can be repacked in the delivery. If there is a packaging proposal in the sales order, the delivery can be packed automatically in accordance with this proposal.
·        Goods issue is posted for the handling units.
·        The customer is informed through EDI about this delivery.

Packing handling units to outbound delivery with batch management

Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
Isaac

Dear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely

Pack existing Handling Units into outbound delivery

Hi,
The current scenario is that a WHSCON IDoc is passed into SAP which will pack handling units onto an inbound delivery. As part of this processing the IDoc will create the HU records on VEKP.
Now, we are sending in a similar WHSCON IDoc to pack the same HU onto an outbound delivery. However, the IDoc is failing. It appears that the IDoc wants to create the HU instead of simply using the existing one.
Has anybody faced a similar issue.
Thanks
Martin

Hallo!
Yes, I have the same problem now.
In the past we had 2 wm sub systems which send data via WHSCON to SAP and pack the delivery items.
To avoid error messages we "kill" the old vekp-record by setting the vekp-status to "0099" with a hart update and create new hu records.
Nowadays this solution is not sufficient, because the old hu has serial numbers.
Any solution in sight?
bye
bernhard

Handling Unit: unable to pack the delivery

Similar Messages

Maybe you are looking for