Handling units were changed. Cancellation no longer possible

HI All
Iam trying to reverse goods movement using VL09 transaction code.
System shows an error "Handling units were changed. Cancellation no longer possible".
Following is the history
Ii have a purchase order, outbound del with HU, inbound delivery with HU.
Due to some reason I have unassigned HU in inbound delivery and inb del has been deleted from system.
Then i tried to reverse the PGI doc for outbound del with tcode VL09
Please advice
regards
satyaprasad

Hi
As per your advice i tried steps(below) mentioned in SAPnotes but still Iam getting same error.
Please advice
1. Call transaction VL32N for processing inbound deliveries and search for the inbound delivery that is assigned to the outbound delivery which is to be reversed. For this purpose, use the search help E external delivery number of the vendor and enter "*<delivery number>" as the search criterion (the placeholder * is required because the delivery number has leading zeros).
2. If the delivery contains handling units, go to the packaging screen. The next steps depend on whether handling unit management is active:
If handling unit management is inactive, delete the handling units of the inbound delivery.
If handling unit management is active, delete the assignment of the handling unit to the inbound delivery using the corresponding function. The handling units are then assigned again to the previous outbound delivery.
3. Delete the inbound delivery.

Similar Messages

Handling Unit Change Document does not exist

I have created a Handling Unit and made changes to the Handling Unit. When I go into HUMO > GOTO > Chnge docs, the screen is blank. Further to this if I display the status of the Handling Unit, the change documents is not ticked. Basically, I would like to see all change documents relating to a Handling Unit. Your assistance is appreciated. Txs Poobie

Hi,
You've checking the @ correct place to see Change Documents but why you're not able to see those ?
Are you sure that you've changed HU?
Check if any 'Data Changed' exists in Tab-General Info of HU. If any Changed Date & By exists, then it should display in Change Docs.
Revert back.
Regards,
Anup

Handling Unit problem in Packing for STO

Hello All,
The problem is related to Packing process in case of Stock Transfer Order (STO).After making delivery while doing the packing procedure, in " Handling Unit " supplements 'Handling Unit Group 1' field is not getting populated / assigned automatically (under additional data tab) though all the master data against 'Handling Unit Group 1' for example 00001 to 00500 are already maintained.Apart from this the combination of finished good & packing material in the packaging instruction in POP2 are also maintained.
Point to be noted is in another scenario the handling unit is getting automatically populated in the packing process after delivery where also the above mentioned areas are not maintained, but still it is working properly which is not clear why & how is this taking place.
The procedure followed in the second scenario which is working are as follows -
In outbound delivery change mode (T Code - VL02N) go to Pack -> Click on Pack Proposal -> Expand packing instruction -> select 602 -> Create HUs -> Message shown is Handling Units were created -> click on Pack material & select the 'Handling Unit' line -> then select 'Detailed view general' -> then go to Additional Data where in Handling Unit Group 1, value is automatically populated / assigned for example 00027.
In my process the value for example 00001 is not getting automatically populated/ assigned.How to do this ?
Looking forward to some valuable suggestions at the earliest.
Thanks & Regards
Priyanka Mitra

I see you hae reposted the question, please request for a solution from SAP they might proide you an OSS note.

VL02N creation of handling units

Hello,
Is it posible to create handling units manually in the delivery? If yes, what is the procedure?
Also, if handling units were done by clicking automatic packing, is it possible to edit the handling unit created? If yes, how?
Thanks

Hi
I just want to add my input...hope this may fullfill ur query...
steps:
1. crate Material Packaging type
2. Create Material Packaging group
3. AllowPackaging type into packaging group
4. assign Material Packaging group into MM02
then go to VL02N there you have handling unit icon..there u can play as much as u can depand on wt, vol.. of Materail
correct me if went wrong..
Thanks
Mahesh

How to delete handling units for a delivery

While deleting delivery note there are hundreds of handling units.
please help me how to delete handling units
Thanks for the help
Rajendra Prasad

Hi
u can delete Handling Units in change view delivery document.. Click Packing it will show Handling Units..By there itself u can delete..
IN VL02N

MM- Handling Unit

Hi Gurus,
We have got materials with Handling unit.
When we are consuming some materials with reference to process order it gives following error:HU item refers to Inspection Lot.
Message No: HuGeneral 320
It asks to create QM movement.
Why it is not asking the for other materials with Handling units?
Thanks in advance.
Shiv

Thanks for your reply
I checked all the masters but I couldn't be able to track. anyway can you please tell me what settings force using Handling Unit?
I mean I don't want to use WM but I want to use handling units for some products is it possible? If yes can you please bried the config?
Thanks
Shiv

No handling Unit

Hi All,
when trying to pack a delivery i get this error
Message no. HUDIALOG017 : No handling units were found for this document
anybody help me where to start?

HI,
Check the picking status in outbound delivery,If it is "relevant for WM " then you need to do the packing and create the TO .
WM cannot be bypassed,but you can do packing if the issuing sloc in outbound delivery is HU managed
Try with packing station "HUPAST" and give the outbound delivery there
Regards
KK
Edited by: Kishore Kumar Galla on Mar 9, 2010 4:20 PM

STO-Handling units have been changed. No cancellation possible

Hi All,
I am getting the following error while doing the cancellation of outbound delivery in VL09.
Handling units have been changed. No cancellation possible
Message no. HUDIALOG304
The Business Process:-STO(mov type 641) from Plant 1000 to Plant 2000
ME21N->VL10B->HU02->VL02N(Assigning HU and PGI)->VF01(Proforma)->J1IIN(Excise)->MIGO(w.r.t Outbound Delivery)
-> VL32N(PGR-Post goods receipt).
Now i want to reverse the outbound delivery..
For this I cancled the PGR in VL09(for Inbound delivery) and removed the assignment of HU then deleted the Inbound Delivery.
Then cancelled the outgoing excise invoice.
In VL09 for outbound delivery i am getting the error.
Handling units have been changed. No cancellation possible
Message no. HUDIALOG304
Kindly guide me
with regards
Azeez.Mohd

For this the solution is we need to do STO proces in reverse direction.
i.e from receiving plant to supplying plant.
So i am closing the issue.
With Regards
Azeez.Mohd

Structure AENDB has status X -Handling Unit Can No Longer Be Changed

Hi,
During TO confirmation using LT12 we are facing an issue with TO confirmation.
we get the error
ERROR-MsgNo :HUDIALO Handling unit / item has the status "cannot be changed"
We identified that the AENDB value is set to X for the HU. Kindly can you let me know when this value is checked in the HU.
Also where in the HU can we trace this
Thank you

Hi,
Check the OSS note
1925247 - Cannot confirm next TO item into the same pick-HU
Thanks,

Changing posting date at usage decision for handle units. How?

Does anybody know how to change posting date at usage decision for handle units (HU)?
If the material is not managed by HU, SAP allows this modification (there's a button with a hat on it referring the material document header).
For HU I cannot seem to change posting date!
Seba

Yes it's possible! Well,...unless for versions 4.6C, 4.7 and ECC 5.
I've found SAP Note #752131 by which SAP declares that you can create the pushbutton from the Screen Painter referring the document header.
That's all,.....so simple, and it works fine!
This note applies ONLY to version 4.6C, 4.7and ECC 5 (which is the version the customer I am with has installed).
Thanks anyway.
Sebas

Deriving/ change the item category from handling unit

Hi SAP GURUS,
In vl01n I want to derive the item category based on the handling unit. Hnadling unit is derived from the payment terms.
Please let me know the required configuration or the development for this.
Thanks

i need ur help regarding the Sales order item category redetermination.
         we are having two item categories YNAE and YNAG and it contain schedule line categories CP and CB ( i.e for item category YNAE schedule line category is CP and
         for item category YNAG schedule line category is CB), for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
         For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
         Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG
         which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and it is working fine .
         But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule on SAVE and its delivary dates are also not getting determined properly. If press the option ATP check at the schedule line level than very things will getting corrected in the order.
i am using UPDKZ = U in both xvbap and xvbep for changes
I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
Regards,
Vaddepally Manoj

How to Change Handling Unit User Status

Hi All,
I am trying to change the HU Status using FM 'STATUS_CHANGE_EXTERN' but its not working.
             lx_huheader-hu_id is the Internal Handling unit number.
            CONCATENATE 'HU'
                        lx_huheader-hu_id INTO
                        lv_objnr.
            CALL FUNCTION 'STATUS_CHANGE_EXTERN'
              EXPORTING
                client              = sy-mandt
                objnr               = lv_objnr
                user_status         = 'E0002'
              EXCEPTIONS
                object_not_found    = 1
                status_inconsistent = 2
                status_not_allowed = 3
                OTHERS              = 4.
Please guide me.
Thanks
Srinath

HI...
add this Export parameter in the call of function module,
           SET_CHGKZ                 = 'X'
after chef id the objnr is correct.........remember to call the commit work, or BAPI_TRANSACTION_COMMIT after the status change.
Marco

No longer possible to download exe files (say Cancel in the download window

no longer possible to download exe files (say Cancel in the download window
== This happened ==
Every time Firefox opened
== some months

Hello Monin.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

Handling unit was not blocked - action cancelled VL02N

Dear All,
While pack VL02N data upload by bapi HU_PACKING_AND_UNPACKING its showing error
Handling unit was not blocked - action cancelled
Mohamed

Refer OSS Note 370195 , 331715

Changing Handling unit weight does not update delivery header weight

Dears,
when we pack an item on a palett, system calculates tara-weight + material weight = gross weight and inserts this value to the likp-btgew. this is correct.
now it happens, that shipping departement uses a scale to get the 'real' weight of the handling unit. if the weigth differs, they change the loading weight of the HU. system calculates correct the new gross weight of the HU.
But when going back to delivery view, the likp-btgew is not updated. Do we miss a setting?
thanks a lot for your help!
Michael

wrong forum

Handling units were changed. Cancellation no longer possible

Similar Messages

Maybe you are looking for