Handling .vol files

Can someone tell how take input from .vol files ?

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Change upload file name with com.oreilly.servlet.MultipartRequest to handle the file upload

1. when use com.oreilly.servlet.MultipartRequest to handle the file upload, can I change the upload file name .
2. how com.oreilly.servlet.MultipartReques handle file upload? do it change to byte ?
what different? if I use the following method?
   File uploadedFile = (File) mp.getFile("filename");
               FileOutputStream fos = new FileOutputStream(filename);
                byte[] uploadedFileBuf = new byte[(int) uploadedFile.length()];
               fos.write(data);
             fos.close();

My questions are
1) when use oreilly package to do file upload , it looks like i line of code is enough to store the upload file in the
file direction.
MultipartRequest multi =
        new MultipartRequest(request, dirName, 10*1024*1024); // 10MB
why some example still use FileOutputStream?
outs = new FileOutputStream(UPLOADDIR+fileName);
    filePart.writeTo(outs);
   outs.flush();
outs.close();
2) can I rename the file name when I use oreilly package?

Hi, I've just purchased and installed an upgrade from Lightroom 4 to 5. It doesn't seem to handle raw files authored with a new Nikon D750 camera. I spoke to the sales rep about this and he gave me a link to the 8.6 DNG converter page with instructions

Hi, I've just purchased and installed an upgrade from Lightroom 4 to 5. It doesn't seem to handle raw files authored with a new Nikon D750 camera. I spoke to the sales rep about this and he gave me a link to the 8.6 DNG converter page with instructions to download. 8.6 only works with Mac OS 10.7-10.9, according to the page. I'm running Yosemite, Mac 10.10. Please can you tell me my options? Lightroom 4 worked beautifully with my older cameras' raw files so I would like to continue using the application. What should I do? How soon will Lightroom 5 be able to deal with raw files from a D750. Many thanks, Adam.

Until the next version of Lightroom is released, you need to use the DNG Converter version 8.7RC to convert your RAW photos to DNG and then import the DNGs into Lightroom.

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

Handling empty files Using SFTP adapter

Hi folks,
Can any please let me know how to handle empty file handling in SFTP adapter as a sender.
I getting error in sxmb_moni while empty file coming in sftp adapter. Please help me on this issue.
Thanks,
Enivass

Hi,
please select option "Empty file Handling-*do not create Message*" in sender comm channel as per your requirement.
Try this.
Reg

Adobe Air + Box2D.swc = TypeError: Error #1009 // New way to handle .swc files in Flash for iOS Apps?

Hi,
I need your help please - I have to update one of my iOS Apps. In this App I use Box2d for a simple maze game (it's an app for kids). When I publish & test this game on my Mac it works fine. I can drag my Hero (fish) through this Maze and all collision detections, gravity etc. work perfect.
When I test it on my iPad it doesn't work. The device debugger shows this error message:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at global$init()
at global$init()
at Box2DAS.Common::b2Base$/initialize()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_ Retina/src/com/Box2DAS/Common/b2Base.as:31]
at wck::WCK/create()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_Retina/src/com/wck/ WCK.as:26]
at misc::Entity/ensureCreated()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_Retina/s rc/com/misc/Entity.as:50]
at misc::Entity/handleAddedToStage()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_Ret ina/src/com/misc/Entity.as:100]
at misc::Entity/handleAddedToStage()
Line 31: loader = new CLibInit();
I guess "CLibInit" should come from the .swc file.
The thing is:
I didn't change anything in this maze game - it seems this has to do something with the new Flash and/or Adobe Air version. Box2D.swc file is included:
It always worked like this - and it works when testing it on my Mac - but it is no longer working on my current system.
So I started my Mac from an older system (10.9.5 on an external HD) and published the App from Flash CS6 and Adobe Air 13.0 - then it suddenly worked on my iPad as before. I was able to tap an the fish and drag it arround.
The same project / app published from my current OS X 10.10 + Flash CC 2014 + Adobe Air 15.0.0.302 is not working. I always receive this Error Message - I can not drag the fish - nothing happens. And I have no idea why this happens and what else I could do. I searched the whole day for a solution but didn't find anything.
So did anything change by the way Flash and/or Air handles .swc files? Is there an other way to include: import cmodule.Box2D.* / CLibInit ?
Please - if anyone has a clue - please let me know!!
Best regards
Jan

Update:
There is also an Android Version of this App. I just published and tested a new version of it on my kindle fire & Samsung Galaxy Tab 2. On both Tablets the maze works perfect. I'm able to drag the fish around etc.
Then I published this Android Version for iOS and tested it on my iPad. Again I'm getting the Error message:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at global$init()
at global$init()
at Box2DAS.Common::b2Base$/initialize()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_ Retina/src/com/Box2DAS/Common/b2Base.as:31]
at wck::WCK/create()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_Retina/src/com/wck/ WCK.as:26]
at misc::Entity/ensureCreated()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_Retina/s rc/com/misc/Entity.as:50]
at misc::Entity/handleAddedToStage()[/Users/jan/Documents/_Projekte/Spielplatz/Universal_Ret ina/src/com/misc/Entity.as:100]
at misc::Entity/handleAddedToStage
...and the fish is stuck - I can't drag it - nothing happens. So this error only occurs when I publish the App for iOS - as an .ipa. Did anything change in the way Air handles .swc files?
I'm totally confused
If anybody has an idea what I could try - PLEASE LET ME KNOW!!

What is the best way to handle .mod files in premiere pro cs4?

I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format.
I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these solutions were posted, or in other words, what is the best way at this current point in time to handle .mod files in premiere pro cs4?
As far as I know, the best thing to do is convert the .mod to .avi and then import it into premiere so it can be edited.. Is there a better way to do it than this? Also, by doing it this way, will I have separate audio and video tracks?
Thanks.

I have just done a bit of reading, here. All of the quotes that follow are from users who have posted in that thread.
It seems that there isn't one solid answer on this subject. The thread that I linked to was started 2 years ago, and replied to just 4 ago, so it's relatively current.
I noticed a couple different interesting statements:
posted by mmontgomery:
In the case of .MOD, you are actually getting a MPEG-2 file. The way
video files work is that there is a codec (COmpressor/DECompressor)
algorithm and a file wrapper (or extension). A JVC .MOD file is a
MPEG-2 encoded file, with a .MOD extension.
You're faced with two
challenges, first the .MOD file type is only recognized and support by a
few applications. I think we covered some of those already. The
interesting thing about wrappers and extensions is that they can be
dealt with in a variety of ways. Sometimes all you need to do to convert
the video file to a compatible video file is to change the extension.
In the case of .MOD files that's not enough. The .MOD wrapper apparently
does a few more things than just bare a unique extension name. It
requires a slightly more complicated method to convert that file. That
is why there is supplied software and that certain third party
applications have .MOD support.
(posted 2 years ago)
This seems to indicate that Ann's solution of simply re-naming the extension is not good enough, unless I am mis-interpreting what she meant.
However, another user said:
posted by futball8:
I edit with Adobe Premiere Pro CS3. All I have to do is simply rename
the .MOD files as .MPG and then import into PP CS3. It takes a small
amount of time to conform the audio, but no file conversion is
necessary. It's a pretty slick workflow and I've never encountered any
problems editing them this way.
(posted 5 months ago)
One can only assume that simply re-naming the extension from .mod to .mpg works in some circumstances, and doesn't work in others. I assume it depends largely on the editing software being used. Perhaps there are still issues that futball8 was simply unaware of or never encountered.
That said, there seems to be a couple of different real solutions to this problem that I have found:
1. Simply use an editing program that supports .mod file format. While pe7 and pe8 supposedly support the .mod format, the following should be noted:
posted by macksgarage:
While Elements 'supports' these files, it is markedly unstable and frequently crashes while using the files, though the application is otherwise reliable. The solution I have arrived at is to repair the container using ffmpeg. (see #3)
(posted 5 months ago)
2. Use a file conversion utility of your choice that will covert .mod to .avi, or another desired format. Import the resulting .avi file into premiere pro cs4.
3. Use FFmpeg. This seems to be the best solution as it does not convert any audio or video:
posted by macksgarae:
If you are not familiar with ffmpeg, it may be a bit of a bear to
learn, but it's not only useful for this, but functions as a video swiss
army knife useful for splicing, muxing/demuxing, and rendering just
about any format into just about any other format.
ffmpeg is an open source project from the linux world, but it has
been ported and is supported on windows. Fetch it here and place it somewhere handy
on your system.
To rewrite the container into a nice, standards compliant .mpg file
that doesn't make applications die, WITHOUT rerendering video or audio
itself, I use this command.
ffmpeg -i INFILE.MOD -acodec copy - vcodec copy OUTFILE.mpg
This not only renames the file, but actually rebuilds the container
around unmodified video and audio data, yielding a file which works much
more stably with Adobe applications, and presumably others as well, as
ffmpeg's open source development goals result in very standards
compliant files.
(posted 5 months ago)
Now, this seems to properly address the issues that can arise from simply renaming .mod to .mpg, as suggested by Ann. So from this point, I assume you can simply import the .mpg into Premiere Pro cs4 (or any other .mpg compliant program) and edit without issue, but it seems like I remember hearing something about Premiere not liking mpegs or something like that, so in that case, maybe it'd be better to skip this and go with option #2. But, it's been awhile since I've touched any NLE, much less premiere pro cs4, so I could be completely wrong and it may have no problems handling mpegs.
All of the things that I've quoted here came from the same thread, so I don't know how accurate any of this is, but the people that have posted these things seem fairly knowledgeable. If someone reads all of this and can confirm or deny any of it, it would be much appreciated.
Option 1 is not really an option for me, because I am sticking with premiere pro cs4 -- I'm not going to get another editor just because it has .mod support. That leaves me with options 2 and 3: Convert to avi, or change the file wrapper/extension properly with FFmpeg and then simply import the resulting .mpg file... Which is better? Or is there yet another solution that I am unaware of that would be even better?

Handling IE9 File Open Save Cancel information bar.

I am automating a webpage using IE object. I am able to fill in the forms and click a link which downloads an excel file.I need to handle the information bar(Yellow popup) "Do you want to open or save the file" on File download in IE 9 using excel
VBA . I need to click save as option. In IE8 i was able to handle the file download dialog box using windows handles. Could anyone please help in achieving the same in IE 9 ?
I also tried for windows handles which does not help me as the open save buttons are not detected as child windows.
Thanks in Advance.

You can try the solution in this thread:
http://stackoverflow.com/questions/26038165/automate-saveas-dialouge-for-ie9-vba

Empty file handling in file?

hi
Q: how to handle empty file in sender/reciver file adapter?
Thanks&Regards
upendra kumar

Upendra,
You have an option in the communication channels. Just go through this help:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
...Satish

Handling EDIFACT Files in File adapter without going for Seeburger adapters

Hi Guys,
Is it possible to convert the EDIFACT files into XML using File content conversion?
We got some requirement where we need to exchange EDIFACT files like DESADV and ORDERS with our partner. I know we can handle these EDI formats using Seeburger adapters like BIC,AS2.
I'm just wondering is it possible to handle these files using FCC in File adapter or Is it recommended to go for Seeburger?
Thanks
Deepthi

Hi,
its better to opt for seeburger for EDI data processings..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ed5d5b-b188-2c10-76a2-997a616e48a9
http://www.cbs-consulting.com/EN/Services/ProcessesApplications/SAP__TechnologyConsulting/OpenPI/OpenPI__n,naviExpand=.html__nnn=true
Check the above links can be helpful..
HTH
Rajesh

Handling large files with FTP in XI

Hi All,
I have a file scenario where i have to post the file with size of more than 500MB and with the fields upto 700 in each line.
The other scenario worked fine if the file size is below 70MB and less number of fields.
Could anyone help me in handling such scenario with large file size and without splitting the file.
1) From your previous experience did you use any Tools to help with the development of the FTP interfaces?
2) The client looked at ItemField, but is not willing to use it, due to the licensing costs. Did you use any self-made pre-processors?
3) Please let me know the good and bad experiences you had when using the XI File Adapter?
Thanks & Regards,
Raghuram Vedagiri.

500 MB is huge. XI will not be able to handle such a huge payload for sure.
Are you using XI as a mere FTP or are you using Content Conversion with mapping etc?
1. Either use a splitting logic to split the file outside XI ( using Scripts ) and then XI handles these file.
2. or Quick Size your hardware ( Java Heap etc ) to make sure that XI can handle this file ( not recommended though). SAP recommends a size of 5 MBas the optimum size.
Regards
Bhavesh

Handling flat files in 'pass through' mode

Is it possible to handle text files in PI in a pass through mode, i.e. just picking them up from a file adapter, and using another file adapter to send them out e.g. via FTP? Our customer wants to use the traceability of PI to do this. There would be no need for a transform.
I suspect the answer is no, because PI processes XML messages. However, I recall that it is possible to send IDocs through in pass through mode, so I wondered if it would be possible to do the same with flat files.
BR,
Tony.

Hi
yes it is possible , you can send even image file also .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
The specified item was not found.
you just to mention the dummy interfaces ..
How to send any data (even binary) through XI, without using the Integration Repository ---good one
this will solve your problem
Regard's
Chetan Ahuja
Edited by: Chetan Ahuja on Sep 17, 2008 12:49 PM

How to handle empty file using sftp adapter

Hi,
Please explain me how to handle empty files in sftp adapter.
Thanks,
Enivass

Hi Enivaas,
I don't have the seeburger sftp adapter at hand at the moment, but asfar as I remember, this does not specifically have an empty-file handling option like the standard ftp adapter.
So to stop emtyp files from being written, guess would need to handle this at the mapping level. For example, check for target creation criteria in the header node in mapping. If the creation criteria is not met, you can throw an error in mapping.
You may also incorporate this condition in your Receiver determination. In this case, if the condition is not satisfied, no receiver is determined in PI.
Regards

How to Handle Empty Files

Hi Experts,
I am doing File to File Scenario.
If my Sender systems file is Empty , that means there is no Records in the File .
How to Handle Empty Files ??????????
I want to know For both Sender and As wel as Receiver Adapters
Please Let me know..
Regards
Khanna

See if u are having a sender file adapter and the file is empty u can tell the if it has to 'Process the empty file' or 'Skip the empty file processing'.
Similarly if you have a message to going to your Receiver file adapter and the message is empty then you can decide still if you want to create a 'File with empty records' or skip creating the same.
Regards,

How to handle flat file dissembler in biz-talk from getting spited in to multiple files???

Hi,
How to handle flat file dissembler in biz-talk from getting spited into multiple files according to number of transaction sets???
where the Map flow is from Flat file to X12 Standard files.
Please advise...

You can go through following links:
Developing
Custom Pipeline Components
How
to Develop BizTalk Custom Pipeline Components - Part1
Custom
BizTalk Pipeline Disassembler Component
Creating
a custom BizTalk 2010 pipeline component–Part I
add one more which talks about extending the FFDASM @http://msdn.microsoft.com/en-us/library/ee267856(v=bts.10).aspx
Regards,
Rachit
Vote, if you find it useful.

Handling .vol files

Similar Messages

Maybe you are looking for