Handoff isn't working at all on my Macbook Pro or iPhone 6. I need help please.
I updated all my stuff but Handoff and Continuity are not working at all.
I have been through it all with setting everything up how it says. YES BLUETOOTH IS ON!
What MacBook Pro year do you have? It has to be at least Mid-2012 per http://support.apple.com/kb/HT6337 for Continuity/Handoff to work.
Similar Messages
-
Handoff won't work between iPad Air and Macbook Pro
I'm trying to get handoff to work between my iPad Air and Macbook Pro (Late 2013). I have tried turning all devices on and off again, turning the handoff on and off again and turning iPhone Cellular Calls on and off again on both devices.
Does anyone know how to fix this issue?This fixed your connectivity problem. However, I don't think this has actually fixed any problem.
I think this Handoff feature is buggy. I have three devices -- a MBP, an iPad Mini, and an iPhone 5 -- and I have done "the dance" you've described and only one of my devices, the iPhone, is now Handoff capable. The iPad Mini still doesn't support Handoff.
I think there is a problem in the software and that all of this signing in, signing out, powering on, powering off, is just getting the devices to clean themselves up so that stuff can start from a fresh slate and attempt to work together again...sort of. It's not necessarily guaranteed. -
The new iTunes has totally destroyed all of the playlists on my iPhone and I need help.
After updating to the new iTunes I lost songs, I lost playlists and I lost control over my music library
in the iPhone. I am annoyed and frustrated
<Edited By Host>To ease use of the new iTunes these tips will revert it back to the iTunes 10 look and feel
View > Show Sidebar
View > Show Status Bar
Click on Black arrow in the search box and untick Search Entire Library
Your playlists should show up in the Left Hand panel beneath Devices
If you find you are still missing playlists off your computer itunes then
http://support.apple.com/kb/TS1967
May help -
i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?
Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work? -
So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?
Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.
-
NAC ADSSO with NAC Module isn't working for all modules
Hello,
We have a NAC OOB-L2-VG Deployment at the Central Site with VLAN Mapping and ADSSO which works just fine.
As part of the project we have implemented NAC Modules on ISR routers for the branch offices; same topology but as the documentation states no VLAN mapping was configured. The problem is that for some users in one branch office the ADSSO isn't working and in another branch office the ADSSO isn't working at all, all the users are getting authenticated with a local user we defined on the servers.
The configuration in both modules is exactly the same; they are using the same user to access the AD (the one used on the ktpass) the data links to the central site are both 1 Mbps and everything is pretty much the same thing.
I have checked the logs on the CAS-Module and it states that Windows SSO is running:
Nov 27, 2009 10:08:23 AM com.perfigo.wlan.jmx.admin.GSSRetrier$RetrierTask run
INFO: GSSR - Windows SSO is running
The interesting thing is that when the user goes thru the NAC process I see these logs:
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.SWissServer run
FINE: Sent Response to /172.19.5.11!
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSServer$GSSThread run
INFO: accepted ADSSO socket ...Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSServer$GSSThread run
INFO: accepting ADSSO socket ...
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: processing socket ...Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: TIMEOUT_SET FOR ADSSO SOCKET ... Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: reading peer's token_length Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:28 AM com.perfigo.wlan.jmx.admin.GSSHandler run
SEVERE: IO Error: Socket[addr=/172.19.5.11,port=1431,localport=8910]:Read timed out
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissHandler processPacket
FINE: SWissServer: get request from : 1043@/172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissHandler processPacket
FINE: SWissServer: Client OS is WINDOWS_PRO_XP
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil parseClientAddrList
FINE: IP=/172.19.5.11, MAC=00:1E:4F:53:97:7D
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.Shell writeToClick
FINE: /proc/click/intern_arpq/add_interest-->172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.Shell writeToClick
FINE: /proc/click/intern_arpq/remove_interest-->172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: IP=172.19.5.11, VLAN=19, OS=WINDOWS_PRO_XP
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Default Provider=Local DB
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Providers=Local DB;
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Number of providers=1
The IP address 172.19.5.11 is the IP of the PC during the unauthenticated role; what the user is finally seeing is the CCA Agent asking for user and password instead of using the ADSSO.
The version of the Agent is 4.1.10, the NAS and NAM are running 4.1.8 and the only ackword thing is that the Active Directory Servers are running Windows 2000 SP4.
Any assistance would be much appreciated.
Thanks,
DL.Hi,
I too have the same error , Any one knows how to resolve this
Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.028 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSServer - accepting ADSSO socket ...
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler - processing socket ... Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler - TIMEOUT_SET FOR ADSSO SOCKET ... Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler - reading peer's token_length from Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.670 +0530 ERROR com.perfigo.wlan.jmx.adsso.GSSHandler - IO Error: Socket[addr=/10.80.0.220,port=1583,localport=8910] null
2010-09-28 10:58:40.215 +0530 INFO com.perfigo.wlan.jmx.adsso.GSSRetrier - GSSR - Windows SSO is running
2010-09-28 10:59:26.308 +0530 WARN org.apache.commons.httpclient.HttpMethodBase - Going to buffer response body of large or unknown size. Using getResponseBodyAsStream instead is recommended.
2010-09-28 10:59:38.478 +0530 INFO com.perfigo.wlan.jmx.admin.OOBDelayTask - OOBDelayTask: remove temp user [00:01:80:53:67:75]/[10.80.0.220]
Thanks in advacne -
So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379 -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks
If you received you phone as part of the contract then surely from a legal pov your contract is with 3 not Apple unless you bought Applecare, if you bought your phone outright then put your 3 SIM into it then yes you'd have to visit an Apple store with your phone's purchase receipt.
-
icloud drive fails to work at all on my Macbook Air 11 inch with Yosemite recently installed, 2014-09-20. It works fine on my iMac, but that's no use to me. Unless it works with my Macbook Air, it's useless. Dropbox manages very well, but Dropbox has recently promoted the War Criminal Condoleeeza Rice to its board, presumably so it can spy on its users better. So, Apple, what's the problem? Any answers to this common problem?
I like it very much. I use it on my iPad (and occasionally my iPhone). I'm kind of a keyboard snob actually. I tried the Apple wireless keyboard first. Apple keyboards have a short throw that hurts the tips of my fingers. They're very pretty but the on button turns on when I don't want it to and my iPad wakes up in my bag. Strike 1.
I went to a little keyboard called the Joy and it had a positive switch so I didn't have the wakeup problem. It worked well though after several months I wore it out and had to replace it with another one. I also didn't like how flat it sat and used rubber bumpers on the back. It too had a short throw that hurt my finger tips after a while but it was better than the Apple.
Then I discovered the Logitech bluetooth keyboard, the K811. This is a great keyboard. It switches between multiple targets with one press, it has a positive on/off switch, the keys light up, it's rechargeable and lasts a long time, and the slight cushioning on the keys keeps my fingers from hurting. I put the rubber bumpers on it though like the Joy because I like the keyboard to sit up a little. It's a tiny bit bigger than the other keyboards but I like it a lot, better than my MBA keyboard and better than my iMac wired keyboard. I'm trying out an after market keyboard on the iMac now but I'm thinking about switching to one of these for the iMac. -
My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???
Oh, I forgot to add that I've also tried repairing permissions.
-
Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.
Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Downgrading is not an option for an iOS device. -
i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?
i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks -
How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert -
How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
ThanksDo the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.
Maybe you are looking for
-
I can still connect to the wifi signal with my computer but it won't stop flashing amber until i fix this issue
-
Standard Reports ME2K doesnt display Net order value
Dear, On executing Standard Reports like ME2K,ME2N. I see Net Order Value column with Zero value, except for POs with Item category "D". Why is this ??? Apperciating ur Suggestions Regards Zulfikar
-
Hi All, Is there a possibilty to find out the changes made in the Rate Routing of a BOM regarding to Component Allocation over a period of time. Regards, R. Vijayakumar
-
hi there I have one problem regarding the overdelivery as well the underdelivery in po When my user is creating the po with some quantity ;the vendor is sending the quantity more than that I know in po we can give the tolerences;so that this problem
-
Compiling a program with i486-mingw32-g++ with a static binary[SOLVED]
Hi, I need to compile a program for win with whatever open cross compiler, I tried mingw32-g++, with the following command> i486-mingw32-g++ main.cpp main.h `/usr/i486-mingw32/bin/wx-config --libs` `/usr/i486-mingw32/bin/wx-config --cxxflags` -o test