Handoff not supported, but it should! MacMini mid2011???

Hi, I tried to set up the handoff on a mac mini mid2011, and not works. The syspref does not show the checkbox.
there is an iPad and an iPhone paired, both has ios 8.1, and handoff and continuity enabled (the SMS-es shared perfectly, icloud drive works, etc)
all devices paired on BT as well. the handoff between the ios devices works
I read that mid2011 MacMini is supporting handoff, it requires BT4.0LE and the hw id 0x6
http://mac-how-to.wonderhowto.com/how-to/find-out-if-your-mac-can-support-contin uitys-handoff-feature-0157357/
Well, just check this screenshot:
https://www.dropbox.com/s/pdiqkjg864s6guh/bug.png?dl=0
This said I have BT 4.0 LE, the LMP version is 0x6, and clearly said: handoff and instant hotspot not supported!
What a **** is this? Why not supported?
How could the SMS sharing and the call sharing works but handoff not?
Please advise

Hi Ábrahám Péter,
Handoff is supported on a Mac mini (Late 2012) and later. See this article -
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

Try cleaning out the phone's port, of pocket fluff and such. Carefully. And check the mains adapter similarly, but less likely.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

After my friend locked me out of my iPhone with too many wrong passwords I restored my iPhone and now it is showing that picture of a cable leading towards itunes and itunes says the sim is not supported but it is the original sim. How do I fix this?

After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

HT1665 iphone says accesory is not supported, but I am not using an accessory

Iphone says accessory is not supported, but I am not using an accessory.

Check the cleanliness of your docking port: if necessary, clean it out with a dry toothbrush and/or canned air. Carefully. Don't mess up those contacts.

Youtube on iphone messgae " movie not supported" - but is is????

youtube randomly stopped working the other day on my iphone 3g.
I get the message "This movie format is not supported", but it is supported as when i first got the phone it played it, and i bookmarked it.
It then goes on to say cannot connect to youtube. what the? i am in my wifi home, and everything else works fine, what the **** ?
Why would it suddenly stop,

Update:
More things seam to be not working now, email is incredible slow to connect and update, and sometimes cannot connect to the mobile me mail server. This may be unrelated . . i duno,
But youtube is useless, i see the list of videos, but if i click on one, it just wont load and displays the above mentioned errors.
How ever today i played with it on the train over cellular 3g netowrk, and EDGE, and youtube works fine. Also i have free wifi in melbourne city with telstra, and youtube works there , , , so im thinking its my home wifi thats doing something, however that is really weird as everything worked when i first got the phone, and now . . ..

HT4759 Outlok 2003 or earliar is not supported. so what should i do now ?

Outlok 2003 or earliar is not supported. so what should i do now ?

Either upgrade Outlook or sync with it using iTunes, not iCloud.

IPhone says that charger not supported,but no charger pluged.

iPhone says that charger not supported,but no charger pluged.

Nothing inserted?
Reset the iPhone: hold sleep and home button at the same time until the apple sign is shown (ingnore the on/off slider).

MSI control center says MSI P67A-C45 is not supported, but it is on the cd?

Hi Guys,
I'm having a very annoying issue with the MSI control center on my MSI P67A-C45.
When I try to run it says the motherboard is not supported, but the software was downloaded from MSI website under my motherboard model.
Another thing is that the Intel Management Engine Driver didn't run the installation saying my computer doesn't meet the minimum requirements? I'm running Windows 7 x86, core i5 2500K and 8GB ram
Any tips?
Regards,
Mephisto

Quote from: Jack on 21-January-11, 15:59:30
Use this version:
https://forum-en.msi.com/index.php?topic=144672.msg1077782#msg1077782
Thanks mate, it worked perfectly =)
Shame MSI puts the wrong file on their website ;/

It says my sim card is not supported but I don't think my Iphone4 is locked

It says my sim card is not supported when I put my tpg microsim in my iphone4, but I'm assured my iphone was not locked by the person I bought it from, who said they bought it from apple, and apple doesn't lock thier iphones

Casper,
Sounds like you got tricked by the person who assured you iPhone was bought from Apple.
Anyway, Hutchison Telecom owns the mobile carrier 3 and not Vodafone. If hutchison told you that only Apple can unlock your phone well that is incorrect, because my sister is with 3 and she had her iPhone unlocked by providing them the IMEI number, after a week or so she got an sms from them saying unlock is sucessful all she had to do was remove the 3 simcard and insert a different simcard and connect to itunes sync. If unlock is successful you should notice your new mobile carrier in iTunes summary, eject iphone power off and restart your iPhone.
I'm with O2 had mine unlocked just by filling in the unlock form provided by O2's website, 3 days later received text message that I can connect to iTunes and unlock, simple as that. Although I still have 14 months remaining on contract O2 provides this iPhone unlock service for free, but only Pay as Go customers need to pay £15.
Vodafone and 3 are quite doggy to customers and customer services is quite bad, every one has a different answer to unlocking iPhone either they say only Apple can unlock or you have to pay to get it unlocked. In your case try and find out which mobile carrier you are locked to, it can't be both Vodafone and 3. If it's Vodafone then you need to fill out a form on their site, takes about two weeks to get a reply and costs $25 / £15, (friend unlocked on Vodafone Pay as go).
I hope the information provided is helpful to you, do it the legitimate way and not jailbreak it.

"Type of file not supported" but previous timeline files OK

Simply put, I have projects that I can open up and they display and edit the MTS files from my Panasonic camera fine. yet, I cannot add any new MTS files or even import ones that are already in the timeline without it saying to me "Type of file not supported". It obviously supports them since my project before imported and I edited them without problem.
I just got done uninstalling and reinstalling the software. But no help.
How can it see and use MTS files in my timeline yet cannot recognize any of the same files in the media folder?
I'm stuck with a useless Premiere Application. $99 down the drain.
Help!

I found out the problem.
The MTS files can't be dragged into the timefrom from the media folder.
They can be dragged from the project folder.
That is the simple fact. Even though it says it does not recognize the file type in the media area, if you import a file into the media area it also appears in the project area and you can go to the project area to drop the file into the timeline.
Go figure...
I am editing away once again. This is what happens when you don't use a program for a while.
Oil well...

Nokia 6230i BT Fax Modem not supported but INF fil...

I have a Nokia 6230i - response from querying the modem gives FCLASS? as zero (no fax support) but the INF file shows that fax support is there:
HKR, Fax, SetupCommand,, "ATS7=255&D3"
HKR, Fax, SerialSpeedInit,, "19200"
HKR, Fax\Class2\AdaptiveAnswer\AnswerCommand, 1,, "ATS7=90S25=2"
HKR, Fax\Class2\AdaptiveAnswer\AnswerCommand, 2,, "ATA"
HKR, Fax\Class2\AdaptiveAnswer, ModemResponseFaxConnect,, "+FCO"
HKR, Fax\Class2\AdaptiveAnswer, ModemResponseDataDetect,, "CARRIER"
HKR, Fax\Class2\AdaptiveAnswer, ModemResponseDataConnect,, "CONNECT"
The Nokia 6320i does not appear in the list of valid modems for Microsoft Fax, though it is in the list of modems for data stuff. I can use it as a modem fine for data calls.
I have tried initialising the modem using the string specified ATS7=255&D3 but to no avail.
Surely there is some way of enabling the fax modem - by flashing the phone or something.....

Sorry George - don't think you can. After searching elsewhere it looks like fax support isn't something they bothered to implement on this phone's modem.
You need to check the feature list of the phone when you buy it if you want a fax-modem.
It seems completely unbelieveable that this isn't there as in the commercial modem market they all come with fax support. Just laziness that they didn't implement it I can only presume.
I got round this by setting up an account with efax.com and sending faxes via email.
Shame I know - but this actually works very nicely (you email the phone number @efax.com with the document you want to send attached) and I also get to have a backup of all received faxes (faxes to your number come in as email).
Hope this helps

Mid 2012 Macbook Pro 2.7 - Showing "handoff not supported"

I'm trying to figure out why handoff is showing as not supported on my Macbook Pro.
It was working on Yosemite Beta up to #4, then it longer supported on beta 5 and the public release.
Am I missing something?

You need to upgrade to Mountain Lion (10.8.4). The following link tells you what you need for AirPlay:
http://support.apple.com/kb/HT5404

"Charging with this accessory is not supported" But it's my iPhone charger?

When I try to connect my phone to the iPhone charger in the wall socket, and also the USB cable to my iMac it say's "Charging with this accessory is not supported".
What's the deal?
Also when I make calls, I get a freaky alien noise nearly everytime. I can hang up and recall the number and it will work fine, but almost every first call is like this, and no doubt I'm getting charged for it too.
Any help appreciated.

I had a Belkin charger and cord for the iPod Touch 3G because Apple failed to include a necessary AC adapter to charge one of their products, which I thought was cheap being that it is a 300+ device. Anyways, when I plugged my new iPhone 4 in, I could not turn on the sound and it didn't have any sound. When I used the cable that came with the iPhone, I was able to get my sound back. The problem is with the cord. If it is not completely compatible with Apple then you will not be able to charge the iPhone.

My iPhone 3GS won't charge. It saids this accessory is not supported but the charger works on other IPhones. What do I do???

My iPhone 3GS won't charge! Whenever I plug it in it saids charging not supported by this accessory. What do I do?? Help please!!!

You can clean the iPhone's dock connector with an old dry toothbrush.
You won't know for certain, but if no change after making sure the dock connector port is clean, more than likely there is some damage.
Make an appointment at an Apple store if there is one nearby where it can be determined if there is damage to the dock connector port or if there is another hardware problem.

Handoff not supported, but it should! MacMini mid2011???

Similar Messages

Maybe you are looking for