Handoff not working for iWork apps, but ok with Safari, Mail, etc.

Handoff is working fine between my iPhone and my rMBP for Safari, Mail, Calendar, Maps, etc. but not working with Pages, Numbers and Keynote.
Have updated Pages, Numbers and Keynote to latest versions on both OS X and iOS.
Any ideas?

Well handoff is now working fine with Pages, Numbers and KeyNote between rMBP and iPhone 5s.
I've not changed anything but did notice that the iOS apps were updated on 6 November to version 2.5.1, so maybe there was a fixed included there.

Similar Messages

Handoff not working for iWork apps

I have an iPhone 6, iPad 4, MacBook Pro (2013) and Mac Mini (2012). The iOS devices are running 8.1 and the Mac is running 10.10. I do not have any issues using handoff with Safari, but none of my iWork apps are handing off in either direction. I did have some success getting Keynote a few times handing off from iOS to OS X. Anything that I need to do differently or is it still just buggy?
Thanks.

Well handoff is now working fine with Pages, Numbers and KeyNote between rMBP and iPhone 5s.
I've not changed anything but did notice that the iOS apps were updated on 6 November to version 2.5.1, so maybe there was a fixed included there.

Continuity not working for iWork from iPhone to Mac

Continuity not working for iWork. When I open numbers on my mac it can be continued to iPhone, however if I open numbers on iPhone the extended dock for numbers is not showing on mac please help!
Iphone 5s iOS 8.0.2
MacBook Air on Yosemite

If you mean photo stream, that's because they only remain in iCloud for 30 days (even though your last 1000 photo stream photos remain on your iOS devices until you delete them). When you first enable photo stream, you only get the photos from the last 39 days as older photos are no longer in iCloud.
If you want to stream your old photo stream photos to iPhoto, add them to a shared photo stream on your phone and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99. Alternatively, you can import them using your usb cable as explained here: http://support.apple.com/kb/HT4083.

Drill down is not working for Pivot tables,but working for chart

I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Apple id not work for mac app store, what happen? It is available for others such as iTunes, my iPhone and iPad

apple id not work for mac app store, what happen? It is available for others such as iTunes, my iPhone and iPad

Try deleting the cache associated with the App Store..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Relaunch the App Store. See if that made a difference.

Cp8 pc, action 'exit' (for close app), not work for iphone app

i found bug,
when you use the action 'exit' on pc( it work well).
but on iphone, it not work

action "cpCmdExit" , it not work for iphone.

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

After the update my earbuds will not work for my music BUT will work fine for phone conversations

After the update my earbud will not work for music BUT will work for phone conversations

this might sound dumb but how do i do that because that is probably the problem

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

The rotation feature works for every app on my iPad except mail. Mail always rotated just as everything else did until recently. I have no idea what I might have done to change this.

The rotation feature on my iPad works for all apps except my mail. I've had this iPad for at least a year and this problem came up a few days ago. Mail always rotated and I can't think of anything I've done differently to cause this change.

Reboot the iPad and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't help, quit the mail app completely and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Iphone 4 push notifications not working for any app

hi, Actually I own an iPhone 4 os 4.2.1(8c148). The thing is that push notification for all the apps that support this feature is not working, I've been an iphone user for long time now, so I konw all the stuff about turning on the push notifications etc. the problem is that my phone give me the pushes like 1 hr or 2 late, or some times never , i just have to open the apps to see my new messages and stuff. Since i live in colombia I have brought the iphone to the store and they take it for like a week and then they give me the phone back saying that is ok , but it isn't. I' have reinstalled the software, I've done anything you can think of, like turning on an of push notification, put it in plane mode, restore as new, backups, and I don't know what else to do, and the thing is that in colombia they don't exchange your phone that easy as it is in the US. So please any advise? ANd I'm sorry about my English. Thank you!

Unfortunately you have already done everything we can possibly instruct you to do.. at this point the only option is getting them to exchange it its under warranty its not working you have to get a exchange

My ow doesn't work for updating apps but does for buying music at ITunes Store. Why?

My Apple password works for buying songs on iTunes but not for updating apps that I purchased through Apple. Why.

is the driver for your network card up to date? that could be a reason it will not work with the more up to date HH3
If want more assistance from the forum members please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Flash not working for one user, but not another on this CPU

Hi,
For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
Are there permissions or libraries I should trash to try to restore this capability?
thanks,
Steve

HI,
For user A on my computer
Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You may also need to delete the Flash cache. Instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709&#11672709
If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
Carolyn

Localization problem: Traditional Chinese is not working for Taiwan App Store

I have published an app that has three languages:
(1) English (as Primary)
(2) Simplified Chinese
(3) Traditional Chinese
I expect I can see Simplified Chinese in China App Store and Traditional Chinese in Taiwan App Store.
I found out it works well for Simplified Chinese case.
However, for Traditional Chinese, it's always English in Taiwan App Store. I have tried so many devices (with language setting to Traditional Chinese). I even went to a local Internet Cafe (so all computers are with Traditional Chinese setting), it's still English for Taiwan App Store.
From iTunes Connect, when I go to "Version Summary" where I can change the "Territory" there. I always see English for Taiwan Territory while it's always Simplified Chinese when China is selected.
From all the experiments I've done, I really think there is something wrong in App Store or iTunes to link Traditional Chinese with Taiwan App Store.
How to report this kind of bug to Apple & have them examine this issue?

Unfortunately you have already done everything we can possibly instruct you to do.. at this point the only option is getting them to exchange it its under warranty its not working you have to get a exchange

Pl/sql Clob code not works for database table but works for collection!

Dear friends
I modified pl/sql code to insert large data for clob column ın ORACLE APEX , It works for collection (I modified it to work for both)
the modified code is blod
declare
aClob1 clob := empty_clob;
aClob2 clob ;
begin
dbms_lob.createtemporary( aClob1, false, dbms_lob.SESSION );
for i in 1..wwv_flow.g_f01.count loop
dbms_lob.writeappend(aClob1,length(wwv_flow.g_f01(i)),wwv_flow.g_f01(i));
end loop;
     apex_collection.create_or_truncate_collection(p_collection_name => 'CLOB_CONTENT');
     apex_collection.add_member(p_collection_name => 'CLOB_CONTENT',p_clob001 => aClob1);
     htmldb_application.g_unrecoverable_error := TRUE;
select cc into aClob2 from tt where id = 21 for update ;
dbms_lob.write(aClob2,Length(aClob1),1,aClob1); commit;
end;
but the charcters more than 8100 not be saved to database clob column !
regards
Edited by: Siyavus on Jan 30, 2009 5:26 PM
Edited by: Siyavus on Jan 30, 2009 5:29 PM

Dear Thomas
dbms_lob.write(aClob2,*dbms_lob.getlength*(aClob1),1,aClob1); commit;
I tried it ( dbms_lob.getlength(aClob1) ) but the result is the same
regards

Handoff not working for iWork apps, but ok with Safari, Mail, etc.

Similar Messages

Maybe you are looking for