Hands Free Link (HFL) on Acura TL does not work with iPhone 3G

I pair iPhone successfully, and can pick up the incoming calls. However, when I make an outgoing call on iPhone, and tell it to use HFL, the call is not transferred to HFL.
HFL works fine with my Treo 650, including picking the outgoing calls.
Is there a software update or setting for either iPhone or Acura?
Thanks,
Inna

InnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please.

Similar Messages

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

Something is not configured correctly that is creating issues with your AppleTV. You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable. After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

Ibg-star glucosemeter does not work with iphone 5s

My iBG-star bloodglucose meter does not function with my iPhone 5s, together with the apple ligthning adapter and app
It did work in december 2013, after january 12th of 2014 it failed. I already have deleted the app, and restored my iPhone.
Strangely, on my iPad mini it works fine!!! Is there some setting incorrect on my iPhone???

Try a restore of the iPhone .The last update may have corrupted the iOS installation
Restore will install a full fresh copy of iOS 7.0.4
ps do you find meter a worthwhile purchase ?
Restore see here
http://support.apple.com/kb/HT4137

3G does not work with iphone 5 in Nepal Telecom

Dear Apple Support,
iphone 5 is not compatible with Nepal Telecom, Nepal (incumbent service provider) 3G network . Looking out solution from apple

I also had same issues using iPhone 5. Got chance to speak with senior engineers at NTC and they have confirmed 3G equipment they are using is not yet compatible with 3G band that iPhone 5 uses. So technically speaking, iPhone 5 has a hardware that is a generation ahead and not backward compatible to 3G system NTC currently uses.
On a bright side though, they confirmed that NTC is aware of the situation and is soon upgrading its hardware within next 1 or 2 months which will finally support 3G on iPhone 5. The other operator though already has support for this (don't want to mention their name but you know the alternative).
As for me, I'll be waiting for the (super frustrating) NTC to upgrade their hardware.
BTW - Apple has nothing to do with this issue.

Corporate Email does not work with iPhone

I'm not a tech wiz so my apologies if this is very elementary. My IT guy said the iPhones will not work with MS Exchange on our server. We currently support Blackberry and Windows Mobile devices such as the Q, Treos, Blackjack. He did mention that my email could work through the POP server, but it wasn't secure. I've tried setting up the POP email to pull my corporate email, but keep getting the Authentication Failure message. Any suggestions on what to try?

If Windows mobile devices can connect using ActiveSync, then your iPhone should be able to connect the same way.
I used a HTC TytnII to sync my mail, calendar et contacts. I got the iphone and entered the exact same informations (server IP adress, user name and login) and it just worked.
You need however to know the exact capitalization of your email adress, as described in your MS Exchange server. To know that, create a message in outlook, enter your name in the "to" field and double-click on your name. In the information box, you should have numerous tabs, and the last one gives you the capitalization (in the "SMTP" field).
Good luck

"Import GPS from iPhone photos" does not work with iPhone 4

I have not been able to get A3's "Import GPS from iPhone photos" to work with my iPhone 4, I get an empty list of photos. A3 is able to import photos from iPhoto 4 without any problems but I'm not able to get the GPS data.
I'm not sure if it is an iPhone 4 or iOS4 issue, I tried my old iPhone 2G and "Import GPS from iPhone photos" is working fine.

Where are you seeing this "Import GPS from iPhone" option?? I just tried importing a picture directly from my iPhone ,and it correctly had its place marked on the Places map. Am I misunderstanding what you all are trying to do??

I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?

I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?

If you own any version of Aperture 3, you are entitled to a free update. Only it can be tricky, if your version is not associated with your AppleID, because you bought it with a serial number.
Have you checked, if you can see an update at the App Store Updates page? Or an "Accept" button on the Purchases tab of the app Store?
Contact the AppStore Support and request a redeem code, to be able to buy the update for free. You will need to provide a proof op purchase of Aperture.
Use this link: http://www.apple.com/support/mac/app-store/contact/
Apple sent redeem codes for Aperture 3.6 to several users who had bought the version on disks, if they could provide a serial number. See for example this discussion: (The post marked as the solution)
Re: Aperture update not possible after update to Yosemite
It is really unfortunate you missed the window of opportunity with Mavericks MacOS X 10.9.5, when the update was easy.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

RRMXP does not work with GUI 7.20

Hi Experts,
I have the following problem. RRMXP does not work with GUI 7.20, BEX 7.0 launches and I have to enter proper user and password. (I get SAP Logon screen with listed systems)
It works properly with GUI 7.10 and I have not to log into BEX.
Did anyone encounter such problem? Does anyone know what causes the problem?
Regards&thanks
Marek

Hi,
RRMXP uses OLE to launch Microsoft Excel together with the SAP BEx add-in. Then it use a macro within BEx to open the workbook. check whether BEx is not installed properly (run SAPBEXC.XLA under C:Program FilesSAPFrontendBW) or the Excel macro security settings prevent execution of the macros.
Also Check the below link it has some note to follow
RRMX and RRMXP does not open the query and workbook
Regards,
Satya

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

Adobe Flash Player does not work with Safari. What can I do?

Hi,
I have a MacBook Pro, Retina, 15 inch, late 2013, 2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
Thanks.

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

Eprint does not work with 5510 D

I have tried several email addresses to associate with my 5510 D but the e-print feature does not work with any of them

Do you already have ePrint set up on your printer?
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Hands Free Link (HFL) on Acura TL does not work with iPhone 3G

Similar Messages

Maybe you are looking for