Handset on the wall in front of the business door

Hello,
I am looking for a solution. I have a client that has analog system at this time. I am moving them to Lync with Enterprise Voice.
At this time, in front of the door they have a handset hanging on the wall with cable going inside the wall. When visitor comes to the office, they pick up handset and it automatically rings to a few people in the office. One of employees picks up the phone
and comes to the door to open it.
Is there anything like this I can use? I do not want to hang the phone on the wall, but not sure what else is there.
Thank you.
Igor.

Someone asked and got me thinking, so I dug in deeper (and perhaps wasted my morning). You can do it with some other qualified phones too:
http://social.technet.microsoft.com/Forums/office/en-US/fadcf1a1-ac6f-4cfa-93a2-afa6deb52d32/autodial-when-offhook-from-snompolycomaudiocodes-phones?forum=lyncvoice#fadcf1a1-ac6f-4cfa-93a2-afa6deb52d32
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

Blocking of the handset in the even of misuse

I am extremely sorry to learn that the facilty of blocking the Nokia handset from misuse in the event of it being stolen etc is not available in India which could be the largest market for Nokia. Thus, a thief can easily remove the sim card and start using the handset by inserting a new simcard. Even the police authorities would be by and large ineffective in such cases. In order to prevent this, the mobiles should carry a unique identification number which the owner can activate and block the handset from unauthorised use. This would enhance the confidence of Nokia mobile users and should go a long way in expanding the market. What is more saddening, this facility is available in other countries, I Understand.
Madhukar Kapadia
EDIT : Removed E-mail AddressMessage Edited by sapere_aude on 22-Oct-2007 02:35 AM

GSM by nature protects itself from such things. You do not need a fancy handset.
In GSM there is three numbers that are sometimes referred to as the GSM Trinity.
MSISDN - Your cellular number
IMSI - Your SIM card serial number
IMEI - Your handset serial number
You can have any of these blacklisted - which means that it will no longer be accepted onto the network or any other networks that shares blacklisting information.
For example, if someone steals your phone and you ask your operator to blacklist it and give you a new handset with your old number they will do the following :
See what the IMSI (SIM card serial) and IMEI (handset serial) was that you used with your MSIDN (cell number) before it was stolen. This is retrieved from any activity you had on the network like Voice calls/SMS/MMS/GPRS. They will then blacklist the IMEI and IMSI (so the old SIM card will not work anymore and the old handset will also not work on the network).
They will then give you a new SIM card and bind your old MSISDN (cell number) to the new IMSI (SIM). You are then ready to use it in a new handset (IMEI).
These things was thought out right at the beginning of GSM back in the 80's to cater for all sorts of scenarios involving crime and also user flexibility.
For example, did you know that you can have two SIM cards that are bound to the SAME number? This is handy if you have a built in GSM car phone. Your network provider can give the IMSI in the car phone preference over the one in the handset (phone in your pocket).
When the user gets into the car and starts it and the car phone logs into the GSM network the network will kick the handset in the users pocket from the network (which will continually try to log back on). Once the car is switched off the handset may log onto the network again.
These days with Bluetooth and newer technologies things like that are no longer used that much, but back in the 80's and 90's it was quite convenient.
GSM is a very clever system. I have worked with it a lot and you get to know it and respect it very quickly.
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u

I have broke my screen on my iphone and i am replacing it today at the apple shop will i be able to change from the white handset to the black handset?

i have broke my screen on my iphone and i am replacing it today at the apple shop will i be able to change from the white handset to the black handset?

Sorry, no. An out of warranty replacement will be of the same model, same colour, same capacity.

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

Refresh the Business Graphics Data on click of next page event of a table

Hi Experts,
We are using Business Graphics UI element in Web dynpro Java to display a table data.
We are limiting the graphics data to 12 table entries at a time.
Now, I just want to know how can we refresh the Business Graphics data when the user clicks on the Next Page option at the bottom of the table.
This is applicable if we have more than 12 table entries and we've restricted the visible row count to 12.
So, for more than 12 entries; when the user selects the next page, I want the next set of data to be displayed in the Business Graphics UI element.
But I am not able to get the action for the Next Page event.
Please note that we are on Netweaver 7.01.
Kindly suggest as how can we achieve this functionality.
Kind Regards,
Anurag

check this
Web Dynpro Java Table Paging Unleashed: Optimizing Heavy Table Performance

UWL: The request cannot be started from the Business Workplace?

Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
Maahir

BY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION     LeaveRequestApprover
DYNPARAM     wi_id=${item.externalId}
PACKAGE     sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.

Removing the business area from the WBS element

Hi Experts,
I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
Now I want to remove the business area from WBS element.
Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
But still Business area field is grayed out for that WBS element.
Could you please let me know how to remove the business area in this case ???
Regards,
Pradip

Hi,
Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
Create new wbse with correct BA & then create pr & po.
Regards,
Sandeep

Very High messages not forwarded to SAP out of the Business Hours

Dear Gurus,
I work for a SAP partner and we have the Solution Manager 7.0 + EHP1, SP stack 24, running under a Windows Server Machine with MS Sqlserver Data Base and we're facing the following problem:
In between the business hours we are able to forward messages to SAP manually, however, after the business hours, messages set as 'very high' priority aren't being forwarded automatically to SAP.
We have already triple checked the configs listed on the SAP Notes 1084744, as well ran the Z-Report included in the note 1225682, however no success at all.
Would you kindly please shed a light on this matter?
Thank you in advance.
Everton.

Hello Everton,
If you are a var Customer using the transaction type ZLFN and action profile ZSLFN0001_ADVANCED, the action profile should be AI_SDK_STANDARD.
I don't now if that is the case.
If your issue persists, please trigger a message in SV-SMG-SUP.
Best regards,
Guilherme

How to delete the index for the business object BUS0033

Hi to all experts,
I'm applying note 1349496 the error here is no records with F4 help for the funds center .
solution from the note
Implement the attached program corrections. Then, in the transaction, delete the index for the business object BUS0033, reactivate it, and start the indexing in the indexing mode "Full". The system then displays the data correctly in the F4 search help.
how to do the second part i have already applied the note .

any help

Possible to change the business Partner from a created Contract in ICWEB??

Hello experts,
I would like to know if it is posible to change the BP from a created contract in ICWEB.
I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
Can you help me, please??
Thank in advance.
Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

Hello S Reddy and a lot of thanks for your help.
But I don't know where I can select this option, there isn't the where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
Thanks in advance.
Regards.

An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229

Recently i upgraded my SharePoint server 2013 to SP1, after the upgrade i received following message in manage database Status page " Databases running in compatibility range, upgrade recommended"
for Business Data Connectivity Database. Then i ran Sharepoint Configuration wizard, which fixed that error on that page but i am getting a error message while accessing BDCApplication page in manage service applications pagein central admin"
An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229
Sys Log :
The BDC Service application failed due to a SQL Exception: SQLServer host WSQLD05\DV. The error returned was: 'The EXECUTE permission was denied on the object 'proc_ar_GetAdministrationMetadataCatalogByPartitionId', database 'sp_BusinessDataConnectivity_DV13',
schema 'dbo'.'
I checked the Db role of the service app pool account, it has SPDataAccess permission over the Database. i cant recreate another application without knowing the root cause. I hope i can get better option to troubleshoot the issue.
Thank you

As per the error message, you can at least grant the BDC service application pool account the EXECUTE perimssions on the sp_BusinessDataConnectivity_DV13 database
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Error while generating the Business Object in Mobile Sales

Hi,
I made changes to the Business Object BOCAPGEN.
Now I am trying to generate the business object but it is giving out the error saying
Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
I am not a MSA Developer and have no clue regarding MAS(Mobile Application Studio)
So any one can please give me a clue regarding the issue
I have solved it by closng all other application other than client console
Thanks Guys
Message was edited by: zack taylor

Hi !
1 year later, I am facing the same problem.
I want to build MSA 4.0 SP8, everything runs fines until the end of the generation of the Tiles, the next step fails :
Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
Then around 10 thousands of error messages of that kind follow in the output window ; howeverin the end it says "Generation End" without telling whether it was successful or not (the first time the output window was too small, I thought all was OK )
Anyways, the Mobile Sales icon appeared on the desktop and when I try to launch it I get the error "Starting MobileSalesfailed".
During another attempt, I check with "Unlocker" the 2 arsrep.dat files I found under the BOL directory, it reported that none was used and locked at that moment.
Also I killed the vbagen.exe process before starting the build, but it was automatically launched after. (first build was launched after a reboot, the 2nd after the 1st failed + vbagen.exe process killed)
Does anyone have any clue ?
Another question is : what are the rights required ? I am a local administrator but I do not have full admin rights (the only thing I saw at the moment is I cannot access to Add/Delete Programs in the Control Panel)
Thanks & Regards,
François
-edit-
thanks to the one who moved it to the right forum
Message was edited by:
Francois Feugier

Error in Activating the Business Content Infocube 0CRM_C08

Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUN

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Handset on the wall in front of the business door

Similar Messages

Maybe you are looking for