Hang after upgrading the Mac OS (10.6.7) last nite
Hi, I just updated the Mac OS last night. Before that, I uploaded lots of photos in iPhotos. After uploading and software update in the Mac and restarted, the iPhoto was hanged and did not respond.
Any ideas to resolve it??
Pls kindly advise.
Hi j,
An SMC Reset can fix some SIL issues. If everything is working fine . . . ? Anyway, it shouldn't hurt anything to try it if you want: http://support.apple.com/kb/HT3964
Similar Messages
-
Printer problem after upgrading the Mac HD disk
After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?
First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing. The card is fine as I can import into iPhoto - any ideas?
It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
Library >> Preferences
clear everything relating to LR5 which usually means deleting the following files:
com.adobe.Lightroom5.plist
com.adobe.Lightroom5LSSharedFileList.plist
Then re-launch Lightroom. -
I have an iPad and iPhone but am stuck with Tiger and Leopard on my old powerbook G4. Will I still be able to get my email on my PowerBook after I upgrade to iCloud? I don't have the cash to upgrade the mac right now. Just wondering what my email options are. Thank You.
You will be able to get your mail on the PowerBook. The calendars (iCal) will not sync; any events added to iPad and/or iPhone will not sync with the Mac but will sync with each other (that is: the mobile devices which are on iCloud). My MacBook Pro (Lion) and iPad2 (iOS5) sync fine; I still get my Mail on iBook G4, MacBook Pro (Snow Leopard) and iMac (Snow Leopard).
Message was edited by: kennethfromtoronto -
I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...
That is because that sync ability (for contacts and calendars) has been removed. Use iCloud instead.
-
On Mac 10.6.8, when I create a new window by hitting command-N or going to the file menu, or if another page creates a new window, the new window just appears instantaneously. However, after upgrading to Mac 10.9.2, new windows appear by an "expanding" animation, which takes slightly longer than the old "appearing" behavior. (Other apps on my Mac do not exhibit the "expanding" behavior, only firefox.)
Was this behavior intentional? How can I get the old behavior back?
I am using Firefox 28.0.Hi __trout__,
Go to the mac system preferences and click on Doc. There is a Minimize window using.... select the animation there.
Hope this helps. -
Ola amigos
Depois de atualizar para o sistema Mac OX 10.9 não consigo baixar programas e Games que tinha na versão anterior.
Aparece um erro de " hardware Grafico não compativel"
_____ Minha dúvida fica, porque antes eu comprei e baixo, e agora não baixa mais ?
Alguem poderia ajudar ???
my mac is Macbook Pro 5,2
=============\\=============\\ in ingles ==========================\\===============\\====================
Hello friends
After upgrading to Mac OX 10.9 system can not download programs and Games that had in the previous version.
Appears an error of "hardware not compatible Grafico"
_____ My question is, because before I bought and down, and now does not download anymore?
Could someone help?? -
I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.
There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC. -
Can't view Camera RAW files in Bridge or Photoshop CS4 after upgrading to Mac Mavericks X OS.
After upgrading my Mac operating system to Mavericks X I can no longer view Camera RAW images on either Bridge or Photoshop CS4!
I'd already fixed the issue of not even being able to launch Photoshop by installing Apple's Java applet, but this doesn't seem to have helped with the Camera RAW situation.
I've tried invoking "Update" in both Bridge and Photoshop, and both indicate there are no updates.
I even went to Adobe's Camera RAW area, and downloaded and installed the Camera RAW plugin specifically for my cameras (Canon 5D Mk ii) and Photoshop CS4, and that hasn't helped at all!
I feel that it's just another silly Java applet, but I haven't any idea how to proceed from here!
HELP!
Thank you,
BobDid you download and install the camera raw 5.7 update?
Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update
There are also other updates you should install, such as 11.0.2 for photoshop and the bridge output module update, if you need them.
Product updates
Adobe - Bridge : For Macintosh
Adobe - Creative Suite : For Macintosh
Adobe - Photoshop : For Macintosh -
After upgrading to Mac OS 10.6.8, sleep indicator light remains off when I start my 15" MB Pro, but the computer works, and when I put it to sleep, the light flashes as normally. Any suggestions?
Hi j,
An SMC Reset can fix some SIL issues. If everything is working fine . . . ? Anyway, it shouldn't hurt anything to try it if you want: http://support.apple.com/kb/HT3964 -
Adobe apps hang after upgrade to Yosemite
Adobe apps hang after upgrade to Yosemite - requires force quit and reopen...any advice?
thanks, Kurt...we'll see...I upgraded to Yosemite so I could load the newer Adobe CC anyway - I'll upgrade the suite to the cloud and see what happens
-
Elements 11 is not running anymore after upgrading my Mac to Mountain Lion
Elements 11 is not running anymore after upgrading my Mac to Mountain Lion
PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
Quit Elements.
Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
Delete the following files from the Preferences folder:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 11 Paths
Adobe Photoshop Elements 11 Settings
Delete this file from the Saved Application State folder:
com.adobe.PhotoshopElements.savedState -
I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?
Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
After upgrading to mac os 10.10
after upgrading to mac os 10.10 "command+A" is not working for copying url and a particular text in an article
i tried using the general way that is"edit >select all" but its selecting the entire page when i try selecting the sentence!
please help!It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
Library >> Preferences
clear everything relating to LR5 which usually means deleting the following files:
com.adobe.Lightroom5.plist
com.adobe.Lightroom5LSSharedFileList.plist
Then re-launch Lightroom. -
Unable to find bootcamp after upgrade tp Mac OS X 10.6.8, please help.
you problem is in OS X (guessing here)
Guess #2: you use an NTFS driver in Mac OS X
Try OS X forum? No?
When you do reboot into Windows - use Option key for one - and go to Windows Control Panel: Boot Camp: the Startup Disk section to change the default OS is there and works.
It isn't "boot camp" it is Windows. Boot Camp are drivers, control panel, program to partition. What you wanted to see was "Windows" OS to change the default.
Do you 'see' Windows volume on the Desktop as being physically there?
Opened Disk Utility and look at the drives and volumes: Windows volumne is still present.
Maybe you are looking for
-
JTextArea refuses to scroll.
Having just read through some old post and not getting any change i thought i would post. I have two JTextArea (They used to be JEditorPanes, but i grew tired of the slow down from the ever growing return of getText) and when they were JEditorPanes,
-
How to add inits to Process Chain
Hello Experts, I have a process chain with one ODS joining data of two other ODS. When I ran the chain for the first time everything was fine. But when I ran it a second time the process cain stops updating activated data from the first two ODS into
-
I modified my web site and I am trying to publish it but it will not publish any change. I am not using mobile me but ftp publishing
-
I want to store movies on an SD disk, watch them on the way to Europe, then use the chip to record photos in my camera. I can't get the iPad mini to recognize the videos I've recorded.
-
Profit margin - frm_kondi_wert_018 - create billing document
Hi! I want to create a sales billing document with reference to a delivery. The profit margin for one billing item not exceeds a certain limit (calculated in FV64A018, frm_kondi_wert_018) and for some materials the system does not pop-up any message,